"Unable to save the network" after Froyo - Captivate Q&A, Help & Troubleshooting

Since I went to Froyo this weekend, I can no longer connect to my home wifi network. It's WPA2 and was working before just fine with a static IP. Now whenever I try to connect to it I get "unable to save the network" and it won't connect. There are no open wifi networks around me to test those and I really don't want to turn everything off on my router and start over again, so has anyone else seen this before?

Related

Having trouble connecting to wireless

Hi,
I've got an Alpine and all the ROMs are simple out-of-the-box as from O2 back in september.
Previously, I would use it to connect to the wireless network in my university. I would turn on the wifi then select the network to connect me to the internet and then enter the wireless key we have been provided with.
However, now it just stays on 'scanning network' and doesn't prompt me to choose a network or enter any key. Sometimes it claims that an IP has been assigned, but it doesn't progress past this. I have tried soft resetting and changing the wifi from 'best battery' to 'best performance'. I have also tried being really near the router.
My friends can access this network just fine on their laptops, and when I run WiFiFoFum it shows up just fine. I am pretty certain the router is a 802.11g one, and I can't tell if it's been changed since I could access it before.
My problem is I know virtually nothing about WiFi, so I don't know how to troubleshoot this. I was hoping someone could give me a bit of help?
Thanks.
try this.
turn wifi on
go to settings
connections
network cards
see if you have networks listed, if u do delete them.
turn off wifi and turn back on again so it searches. see if it picks up the network.
Failing that what IP is it showing u, if its assigned one??

Wi-Fi problem

I have a brand new tilt that I got last night and I am unable to connect to my wireless network. When I enable wi-fi in my Wireless Manager, it prompts me to connect to my router or to my PS3. I choose my router, set it to connect to 'Work' (used to do this on WM2003/WM5) and enter my WEP key.
After the WEP key is entered, I see that it is connecting, but then it just goes back to the network being available.
I have tried changing the wireless power to high, deleted the settings and re-entered them. Rebooted the phone with a hard reset, as well as my router, and I am still unable to connect.
Any thoughts?
what about setting it to connect to "The Internet" instead of Work? that's how i have mine and it works flawlessly...
I get the same results. In 'Start' > 'Settings' > 'Connections' > 'Wi-Fi' I see the network I want to connect to. I highlight it and click 'Connect' and it says 'Connecting' for a few moments. Instead of moving to 'Connected' it just goes back to saying 'Available'.
I have tried every combination of 'Work' or 'The Internet' that I can find, and still no luck. I tried connecting to a neighbor's unsecured wireless network and got the same results, so I know it's not the WEP. On a side note, my Dell Axim X50 with WM5 connects to both networks just fine.
this happens to my phone every so often but a soft-reset or cycling the WiFi in the comm manageer usually fixes it...
Unfortunately, that hasn't worked for me. I have done soft resets, hard resets, and still it doesn't want to work. I'm going to try at my office tomorrow when I get there and see if that makes a difference, but I don't have high hopes at the moment.
I've read that some routers might be problematic, so I am wondering if anyone has tried the Linksys WRT100N with their Tilt. If so, was there anything special that was done to get it working?
same exact problem with my wi-fi... except the 1st day i got my tilt, the wi-fi was working flawless while hooked up through usb to my laptop.. now its not working at all. It just tries to connect and nothing happened. I may even have the same exact router lol. Its an old linksys
I think it's the Wireless-N router at home. I am at work on a WAP54G and it's working fine. PIE launches, I can see my network and Pocket Putty hits the servers I need it to. Unfortunately, that means I get to mess with the router at home, but fortunately it means there is nothing wrong with the tilt.

Can see wireless network, but not connecting

I am running CyanogenMod 7.1, and am experiencing problems with the Wi-Fi connection recently. I have been able to connect to my router fine in the past.
Currently when I turn on Wi-Fi it will show "scanning" and show the network that I would like to connect to. I have entered the correct WPA2 key but it does not connect automatically. If I press on the network and choose "Connect", nothing happens.
I have been able to use other wireless networks, and this one in particular has worked in the past. This seems to be an issue between the phone and router, but I have no idea what could be causing it. Other computers are able to connect to this network fine.
Also, when I deliberately enter the wrong password and attempt to connect, nothing happens. I do not receive an error about having the wrong password.
Any ideas as to what might be happening?
Thanks

[Q] wifi connection problem

hi...before anyone say anything first, I had my wifi problem whenever there is blackout in our area, then I cannot connect to wifi but my sisters can connect they use iphone and laptop. whenever I will connect it shows " obtaining IP address" then it will be disabled and it will say disconnected and I cannot connect to my cousins wifi too but I can connect to my work's wifi...I already factory reset it many times but now I'm having problems with that too...please help me...
Try rebooting the Wi-Fi access point your trying to connect to, I have to do that to my Buffalo Wi-Fi router from time to time and then the phone will connect OK. Its worth a try.

wifi "Connected, no internet" but i have internet access on my phone

hey guys, i have a problem with all of the marshmallow roms with clean install and latest bootloader and radio.
i can connect to my wifi router and it says "Connected, no internet" while i have internet access on the phone :/ and each time i should connect to router manually because of this "no internet" message
i have this problem with all of the android M roms, can anyone help me plz? maybe a little changes in phone or router settings?
anyone? .........
SignalX said:
hey guys, i have a problem with all of the marshmallow roms with clean install and latest bootloader and radio.
i can connect to my wifi router and it says "Connected, no internet" while i have internet access on the phone :/ and each time i should connect to router manually because of this "no internet" message
i have this problem with all of the android M roms, can anyone help me plz? maybe a little changes in phone or router settings?
Click to expand...
Click to collapse
Same with Nexus 7 2013. I connect to wifi on remote camera and get "connected, no internet" and then the connection will go on, go off constantly. In the UI a brief message appears sporadically asking you if you want to keep connection, if so press OK. However the message does not stay long enough for you to hit OK. I might have hit the OK a few times but apparently not, as the connection does not hold.

Categories

Resources