First off, I was already running Froyo on my captivate and while messing around with the build.prop file i accidentally i guess bricked my captivate. I doesnt start up. It hangs on the att boot logo and then restarts.
Now I know this might be a topic already discussed but ive searched all over these forums and cant seem to find an answer. Is there anyway to update the captivate to froyo 2.2 on a mac!!!
jrforlife said:
First off, I was already running Froyo on my captivate and while messing around with the build.prop file i accidentally i guess bricked my captivate. I doesnt start up. It hangs on the att boot logo and then restarts.
Now I know this might be a topic already discussed but ive searched all over these forums and cant seem to find an answer. Is there anyway to update the captivate to froyo 2.2 on a mac!!!
Click to expand...
Click to collapse
Bootcamp.
I did try Parallels but that failed when the phone rebooted into d/l mode. Apparently its not fully USB compliant..
Related
okay im getting completely frantic right now, i tried to flash the newest cognition ROM from stock 2.1 rooted from recover and it all loaded fine but i kept getting force closes com.android.phone or something and then i was like okay ill just restore my last backup and did that but now it wont boot past the at&t world phone screen and i cant get into recovery. ive read other threads about this but theyre all different situations so i wanted help for my specific situation. i love all the devs help and hard work on this site and i hope my phone is not bricked because ive only had it for about 2 weeks. so please a fast response would be appreciated, i would like to have my phone fixed by tonight thanks in advance guys oh and also i am able to get into download mode i just dont know what that does.
no one knows?
nevermind everyone i got it using odin
Just reflash use this http://forum.xda-developers.com/showthread.php?t=818439 or you can search for odin one click by DG.
Odin. You will be fine. Just search and read. Be careful what you do and try your best to understand what you are doing before you panic.
You were getting fc on cog so instead of reading and re -flashing you panicked then flashed a 2. 1 back up over 2. 2 with voodoo lagfix active. :O it is not the end of the world. I do hope you have a PC and not a MAC. Odin will flash you back to stock but you will need to search and read. Good luck
Captivate
Cog 2.2
I think I'm in a similar boat... tried to flash back to JH7 after getting tired of froyo versions that I didn't like. Now I'm stuck at the AT&T screen and nothing works... no matter what button I hold while I power the phone on, I get nothing. Any advice?
Update: I think I may have something here... found a guide talking about JTAG stuff that suggested holding both volume buttons while plugging in the USB cable... seems to have gotten me to the "downloading..." screen. That's a plus.
So I used to odin one click to downgrade my captivate from 2.2 froyo to 2.1 eclair but every time that I used odin and my phone restarts it is stays stuck on att logo or it stays on the charging screen. Any suggestions???
jcc310 said:
So I used to odin one click to downgrade my captivate from 2.2 froyo to 2.1 eclair but every time that I used odin and my phone restarts it is stays stuck on att logo or it stays on the charging screen. Any suggestions???
Click to expand...
Click to collapse
Yes, do a search. some phones that come with 2.2 already installed can not use the one click method. This has been covered many times already. Please search before opening a new thread
Alright guys. So, I rooted my galaxy tab initially when I first got it. Well after a while it got messed up and was stuck on downloading the gingerbread update and pretty much locked up. Well I took another look at it yesterday. Got everything down, flashed the stock VZW rom and powered her up.
So, now doing some looking the only thing I can find to root it is re-flashing part of the rom (using oden and CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS) . Tried this (about 4 times) and when I try it. All I get is a white line, samsung logo, restart. No recovery mode, No nothing. Except download mode.
So. Am I just stuck to far up my own ... to see the solution?
Ive searched. And Searched. But cant find anything
So, if someone can point me in the right area. It would be great
Just thought....this might be in the wrong area. If so. I apologize.
... and two buttons have different function; back and search.
i am from canada and have an unlocked galaxy s gt -i9000 (sgh-i896). its originally on rogers ut i use fido on it. it was rooted and running fine on froyo. then i think i stupidly upgraded with some wrong files. two buttons don't work and the computer will only recognize it as a memory stick when i have the micro sd in. it goes in to download mode, but the computer doesn't see it, in both oden and kies. i have tried with usb debugging. nada. the reception is horrible. im new to androids and have searched many forms. i keep getting close to the answer but its not for my device.
pda i9000xwjvz
phone i9000xxjvt
csc i9000oxajvt.
i searched around and found that the "i9000xxjvt" is for the uk captivate. seeing as i live in canada and this is a rogers phone i see this as being a possible problem?
i have done a factory data reset. no good. is there any way to update or downgrade so that i can start messing around with my phone again?
i hope you can help
See the Sticky Thread in the General Forum -- "Captivate Connection Issues..."
If that helps, then u can go to the "Stock Rom One Clicks" that is Stickied in the Development Forum and choose a stock to go back to.
Sent by XDA Premium App
The i9000 and the i896 are different phones. You can't simply flash files for the other one and expect them to fully work, unless they are made for that purpose. The i897-i896 is Captivate, i9000 is the Galaxy S.
Make sure you have Odin open first, then plug in. I recommend trying a one click back to stock
Sent from my ICS Samsung Captivate
ive looked at many connection issue pages and no luck.
i've tried the 1 click a few times. im gonna try it again from another computer soon. hopefully that will help.
and im a little confused. on the back of my phone it says i896 and when i boot up it says gt-i9000? so how are they different?
**update
so im trying 1 click from a new computer and no good.
is there a way to reinstall an os from the memory stick?
U have an i896 phone that has a ported i9000 rom flashed on it.
That is all.
U may want to give Heimdall a try. It uses different drivers and so may work where Odin hasn't.
Sent by XDA Premium App
4-2ndtwin said:
U have an i896 phone that has a ported i9000 rom flashed on it.
That is all.
U may want to give Heimdall a try. It uses different drivers and so may work where Odin hasn't.
Sent by XDA Premium App
Click to expand...
Click to collapse
It actually sounds like he has an unported firmware. That's why the buttons don't work right. You also have different bootloaders. Download mode can be achieved by turning phone off (pulling the battery then replacing it is easiest way). Then hold volume down (not volume up and down) and plugging usb in. As for drivers, uninstall the drivers you have. Look in program files for a folder labeled Samsung and delete it. Restart your computer. Reinstall drivers. As said, Heimdall might be a better route to take since it uses a different driver.
bmjerome said:
and im a little confused. on the back of my phone it says i896 and when i boot up it says gt-i9000? so how are they different?
Click to expand...
Click to collapse
You have a Rogers Captivate that has i9000 bootloaders on it. If you didn't flash them, then somebody else did before you bought it. I think you are trying to run unported i9000 ROMs. i9000 roms only work if somebody reorients the kernel and modifies a few parts of the ROM.
Anyway, download mode on i9000 bootloaders (from powered off state) is Vol down + USB. Then... well what do you want to put on it? Stock i896 Gingerbread?
yeah id like stock i896 gingerbread. i have no problem going in to download mode.
ill try heimdall and get back to you guys.
usoimon this
so i tried with hiemdall and tried to find my phone is zadig but no luck.
i can go in to download mode no problem. do i possibly have to get the i9000 driver for my computer. and if yes which one in particular?
http://forum.xda-developers.com/showthread.php?t=1351224
Read through that again. The same driver package should work for i896,i897, i9000.
Try a different cable, and make sure to use the proper usb port.
ive tried all my usb ports, new usb wire, different computers. ive followed may walk troughs. uninstalled and reinstalled a bunch of different driver packs.
phone goes in to download mode no problem every time. but both odin and heimdall don't recognize.
when the phone is powered up it goes in to usb mode and says connected but on the computer the usb doesn't see anything. no pop ups in the tray or anything.
id this a lost cause? am i missing something? im usually pretty good with this kind of stuff...
*update.
ive been reading all over the internet and have found that it may be a hardware issue. maybe happening randomly after i had installed the gingerbread.
is there a way that anyone would know of to update my firmware through wifi blue tooth or micro sd?
FIXXXXED!! woohoo
so i went to my brothers who sold me the phone and it worked immediately. i guess his computer remembered it. i dont know why nothing worked on my 3 computers with all the drivers and stuff that i tried. thank you for all the help.
Hey guys, ok so im superrrrrrrr new to this. Iv had an iphone and blackberrry half of my life and im just getting into the android world.
Point of the matter,
i have a galaxy ace, s5830m
just bought it a couple days ago here in venezuela
and everyting was running smooth, i really liked everything
since i sort of know about jailbreaking and all that stuff from having an iphone
i started reading up on how androids worked and managed to root my phone with out a problom
being that im a custom fanatic, i figured i wanted to update my gingerbread os to a ics using a custom rom from
cm9
this is what i did...
I downloaded the zip cm9 file,
loaded it into my sd card
went into recovery mode
and clicked update from sd card (totally forgot to clear cache and wipe/factory reset) as it was stated in the guide i was reading..
Anywhoo.. The instalation of the rom went fine, it said it installed correctly and with no errors
so i rebooted the phone, afterwards as it stated on the guide and boom!
Bootloop...
the phone is stuck on the samsung galaxy ace s5280m screen and wont finish booting up
iv left it like that for more then 30mins and nothing! Iv done several batter pulls and reboots and nothing
i went into recover mode and tried clearing cache and doing the wipe and rebooting again
but nothing! Its still stuck in the loop!
I did some reading and figured id load a stock firmware using odin hoping this would fix the problom
so i downloaded the latest one from my country from sammobile
downloaded the drivers
the cooper_v1.0 file
downloaded odin v4.38
did everything as the guide said but now odin isnt wanting to work,
i opened it as a administrator, i loaded the cooper file,
but when i want to load the single tar.md5 file..(the firmware)
it totally crashes on me, iv tried several times and it always crashes at the same point
iv tried on 3 diffrent computers and iv tried diffrent odim versoins and it always crashes at the same place!
This is when i started to worry, so i downlaoded samsung kies, to see if i can do a firmware update from there thinking itd be more reliable but now my computer doesnt want to reconize my phone
i can enter both download mode and recover mode having only the clear cache/factoryreset/and reboot options available.. Im really freakeddd out being that i just got this phone, and i feel pretty stupid i should have never done anything to the phone...but if anyone could help id really apreciate it!
Im desperate and i dont want to take it anywhere, cause im in venezuela at the moment
and i dont want to end up paying another dude a bunch of money to fix something that cud be fixed with some easy steps.
So any help is great!
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
hmm
121C4 said:
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
Click to expand...
Click to collapse
Ok i can look that up,
i kind have the same feeling,
being that the models are always divided as such..
So your saying (if this is right)
i need to find the Cooper File for s5830i
AND the ROM
and Odin should work after that?
The thing thats worrying me, is that all odin is doing is crashing on me,
but im going to look for another cooper file
being that the rom is especifcally for s5830M already
thanks for your fast response
im going to try this and get back to you...cause i really want my phone back D:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
ok
dxppxd said:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
Click to expand...
Click to collapse
ok so i did some investigation
after you told me about the models not being the same and ur right
i and m models are the same
and they only work with odin 1.85 as yu just said
and supposedly
only full package roms work not one package roms
and as i kepted reading in a spanish form,
there arent any ICS custom mods availbale for the M series
the only roms they run are the original stock roms.
so i guess i can forget trying to load a custom ICS rom into it
if this all works as the spanish forum explained
ill get back and confirm everything
ok so i have everything ready now,
but now my pc doesnt want to read my phone wile its on download mode
it will only read wile its on boot loop mode
and the only thing that happens on odin
is that it says ADDED!! (wile on boot loop mode)
but it never says my phone is reconized like its suppose to..
and when i click start.. nothing happens..
anyway to get my pc to reconize my phone on download mode?
or am i doing something wrong?
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
121C4 said:
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
Click to expand...
Click to collapse
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
JuniMatos said:
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try on another pc. Dont give up!! There will be a solution
Sent from my GT-S5830 using xda app-developers app