Database Develop

Big problems with CyanogenMod-4.2.11.1 and APPS2SD

Hi
I have some big problems when I use an EXT2, EXT3 ore EXT4 partition on my SD card.
I want to use APPS2SD to save memory space, but as soon as I make an EXT partition on my SD card, my phone always hangs all the time in the startup.
I get the Android logo, and that the screen goes black with background light, and hangs like that fore 30min with no change.
But if I eject my SD card and start up without it, it's no problem, but now all my programs are in the SD card so they are missing.
What I've done:
I had CyanogenMod-4.2.05.
Made an EXT3 partiotion on my SD card.
Made an linux-swap 31mb partiotion
Updatet to CyanogenMod-4.2.11.1 and than it started up, added my progs to the SD.
Had 1 reboot with no problem, tried to update some programs, than it hang up on the update, woudnt update.
So I had an reboot, that when it started up I got a lot of error messages on the updates.
Tried an new update, and now it wont start up with the SD inserted.
I tried ext partition on my erlier CyanogenMod but same problem than also...
What could my problem be?
Have an 8gb class 4 micro SD card
when I now trie to install programs I get an error message "Insuffcient storage availble"

Clearly this is a problem with your sdcard. Try complete re-format first, followed by complete wipe and re-flash. If that doesn't help then you need a new sdcard.
Good luck.

In what order are your partitions? It sounds like you no longer have the FAT32 as mmcblk0p1? Make sure the first partition is the FAT32, the second is EXT, and the third your swap.

Hi
Could be my card, it's an ebay card so, but works fine with music...
I use an guide fore formating my card, and I make the fat32 first, than ext and so the swap.
Now I tried to make an partition with ubuntu, and without the swap, but dosent seem to help, black screen after the adroid logo....
I guess I give up and its my card...
When i use the Print comand in parted i get the fat32 up first...
Print
number start end size type file system fla
gs
1 0 7500 7500mb primary fat32 lba
2 7500 8000 500mb primary ext2
3 8000 8032 32mb primary linux-swap(v1)

Use AmonRa's recovery? It will paritition the card for you the right way with whatever size partitions you specify.

Ok so my partition could be the problem?
ill try the AmonRa's recovery than, and if not I guess its not ment to be apps2sd on my phone...

Well, I wouldn't say that apps2sd is not ment for your phone since so many of us are using this hack (including myself) however this may be a tedious process of eliminating possible causes. I would not rule out the possibility of damaged SD card. It has happened before to many people. Re-format and re-partition your existing card first. Wipe everything off your phone, re-flash the rom of your choice (following the instructions) and see if it works. If it doesn't work - then I would look into getting a different SD card. I just received a tweet that compUSA has class 6 8GbB card with adapter for $30. I also saw something in "Dream accessories" forum in the "Promotions" thread, I believe 8GB card for $15 from Amazon. Cards are a lot cheaper then new phone, you should try that out. Good luck.

Ok.
I've now installed the AmonRa's recovery 1.5.2
Partition the card with AmonRa's recovery
Wiped data/factory
Shud I wipe dalvik-cache, battry status, and rotate settings also?

Wipe dalvik-cache, others should not matter for what you're trying to accomplish.

Ok thx.
I'll try that, if it doesnt work now, I'll buy an new sd card

So AmonRa's recovery didnt help, so I guess it's my sd card than.
Will buy an new one and test with that.
So fore now on it's low on space
Maby this time I will remember to take an backup when I have y phone the way I like, getting tierd of setting up my phone all the time

Partition...problem?

So. I have Froyo, and Amon-ra 1.7.0
Downloaded NFS Shift (despite knowing it has problems with snapdragon)
and decided to install it. I don't use a lot of apps, but 100mb is more than I have.
So I decided to do apps 2 sd. First things first, partition the sd card.
Booted into recovery, partitioned sd card (1 gig to ext3, remainder to fat32)
And rebooted the phone. And now...pretty much everything on my sdcard is gone?
Was that supposed to happen? It's not that devestating, but I did have some stuff
on there that I would like to get back...
Gah.

This is normal when you repartition disk. Partition table was overwritten by new table you create in recovery.
Theoretically if you don't write any data on sdcard after the loss, you can plug the card to computer and recovery your old partition table and try to recovery files but if you write something, you can't do nothing.
But you can try it, google for "fat32 recovery" ..

Partitioning SD card erases everything that was on it.

Yup, that's normal. Partitioning anything in that way will wipe it all.

Alright, this is what I get for not researching I guess. And I haven't added anything to it, so I will try to recover later. Thanks guys. Just curious.
Sent from my Nexus One using XDA App

Can't Format SD Card

I lost my sd card data flashing a rom. Could not mount it even thru recovery. Got a card reader, but it won't format it.
Using Mini Partition Tool to troubleshoot. I am not at a point where it shows three partitions. The main 16gb unallocated, logical. The ext3 unformatted 500mb, primary (think I did that by mistake when trying to recover partition). And a 32mb unallocated, logical. All zero used memory.
I need to get back to one partition allocated, primary. Then I can get sd data back on it and reformat thru recovery.
Again using Mini Partition Wizard
Any help please!

OK,
I got it repartitioned as primary and formatted, bu sd card from pc now.
Hope phone recognizes it.
Will update, if I need further help.
Ken

If you want a good program to format your sd card, try SD Formatter.
Download and install that, plug in your sdcard into your sd card reader and format it.
Choose Full Erase On (if possible) and Resize On. It will format your sdcard to factory default and that means even the ext partition will be gone too.

Well, all transferred. Still won't mount. Says can't mount either of the dev/blocks mmcb1k0p1 and mmcb1k0.
Staus bar says sd card damaged.
?????

musashiken,
Thanks, typing while you posted. Based on my last post should I still do that?
Ken

Yeah I think you should try to reformat again with the program I suggested, as that will full format your sd card.
Once done, put your sd card back to the phone and create ext partition in recovery.

At work now but will be working on it.
Thanks
Ken

musashiken,
Thanks, appreciate all your help
That program worked, and I am back up and running
Ken

Glad it worked for you. My sd card kept giving me problems and I have to use this every few rom flashes.

I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork, I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig

If sdformatter did not work it may be bad.
I always had good luck with it.
Did you have all options set per instructions?

after rooting, microsd won't resize

So I went through the process of rooting the nook color tonight, and got everything working great.
However...now my 16gb microsd is a 40mb microsd. I'm sure I'm an idiot, and I'm missing something...but how the heck do I talk this thing into being a 16gb card again?
(it's the card I made into the bootable nooter image, in case this isn't coming through clearly)

Here is how I did it.
1.type 'diskpart' in the run prompt
this will bring you to a DOS prompt​2.type 'list disk'
this will list all the volume available​3.type 'select disk #'
in the #, use the number from your SD Card​4.type 'list partition'
it'll probably be partition 1, be just to be sure​5.type 'select partition #'
select the bootable SD Card partition​6.type 'delete partition'
now the 40mb partition is deleted and you can reformat under Disk Management​

that didn't work for me, but it jogged my memory enough to find disk management in windows 7, and delete the partition. Thank you!

I just put my SD card back in the nook. Once there I unmounted it and formated it. got my 4 Gb back. Nice and easy.

devis said:
I just put my SD card back in the nook. Once there I unmounted it and formated it. got my 4 Gb back. Nice and easy.
Click to expand...
Click to collapse
same here. seems like the quickest and easiest solution.

devis said:
I just put my SD card back in the nook. Once there I unmounted it and formated it. got my 4 Gb back. Nice and easy.
Click to expand...
Click to collapse
I did the same thing.

I tried that, but didn't have success, hence the question and workaround.

If you're using a windows machine try download the official SD Formatter from:
http://www.sdcard.org/consumers/formatter/
It will wipe out all your partitions and formats the card using 32kb allocation units vs the standard windows 4096 which gives better read/write performance.

this worked for me thanks

[Q] How can I format a partitioned SD?

Hey all, I want to write a new image to what is currently a verygreen size-agnostic card, but Windows, EASEUS and the NC itself only see the boot partition. If I try to format it from Windows 7 x64, will it just wipe the partition, or format the whole card? Is there a way to do it from CWM?
I have:
verygreen's latest size-agnostic card running CM7.0.3 + dal's 4/24 OC kernel
the 3.1 beta running dal's 5/13 OC kernel on eMMC
the latest CWM on eMMC
EASEUS on my PC
I do not have:
another SD card
a card reader other than the NC
Obviously "get a card reader" and "get another card" are answers I could come up with myself. Do I have any options using what I have? The goal is to write racks' Phiremod/HC dual-boot to the card.
ETA: I am hesitant to attempt formatting from CM7 due to the big red letters in the dev thread for 3.1:
DO NOT FORMAT YOUR SD CARD IN CM7. DUE TO A VOLD ISSUE THIS WILL FORMAT YOUR /BOOT INSTEAD OF THE SD CARD!
****Should be fixed in nightly 13****
Click to expand...
Click to collapse
Does that still apply? Does it apply to the 7.0.3 build? Would flashing eMMC to CM7.0.3 and formatting the card be a possibility?
UPDATE [SOLVED]: As the final post says, the best method to revert a bootable card to storage seems to be, in EASEUS, deleting all partitions except the "SDcard/CM7 SDcard" partition, then dragging that partition to take up the unallocated space.

I use XP and using a USB adapter plug it in go to my computer right click on the drive which will say boot and click format. It takes about 5 seconds to format. Tou will get a warning. Not sure if it is the same with Win 7 but cannot see why it wouldn't format the same way.

Well, I did order a card reader from Amazon. This one seems like it may actually come in handy down the road and not be a one-use thing, and it should be here tomorrow. Maybe for experimentation's sake I'll do one last back-up and try formatting the card in the NC.
I can't sync my apps from Titanium + Dropbox until I get Titanium pointed at a bigger partition.

In the interest of completeness and for the unknown googler: Windows was incapable of formating any but the first partition of the card whether in the NC or a card reader. I tried "Wipe drive" in EASEUS, after which neither Windows Explorer nor the NC would recognize the card to format it. I wrote a new image to it (the HC/Ph dual boot) with WinImage, which worked fine. However, CM7 on the NC still only had access to the boot partition, and I needed more space so that I could sync Titanium Backup with Dropbox to restore my apps and settings from my old SD installation.
Again, there was no formating the partitioned card, so in EASEUS I deleted all the partitions except SDcard, extended that partition, and then formatted it in Windows. I was almost right--the last step was not only a waste of time, but rendered the card readable to Windows but not to CM7 or CWM. So, I once again wrote an image to the card, deleted all the other partitions, extended SDcard to to take up the unallocated space, and then jammed the card in the NC: success!
And Titanium Backup FCed whenever I tried to sync to Dropbox :/
Well, so be it. I manually replaced the Titanium Backup folder on the SD card with the one from my Dropbox, and it's almost done restoring now #knockonwood