Hi guys,
Today my D2 decided not to work at all when switching "ON" the screen stays at the windows mobile welcome screen and refuses to continue "Freeze".
I tried soft and hard rests without success...
Anybody can help please?!!!....
Doesn't sound good.
The next thing I would try is to take the battery out for about 30 minutes, then try again with battery replaced. I had a weird issue with an old PDA where on ocassion it would refuse to turn on, and the only fix was to leave out the battery for at least 15 minutes.
Good luck
Hi, though your question has nothing to do with any kind of development, , maybe you should be posting in general section, this is a wild guess, the answer to your question is easy, enter bootloader and flash the oficial rom suited for your device.
If this doesn´t work send it to your distributor.
Cheers.
ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
dm03 shm3h said:
ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
Click to expand...
Click to collapse
Should i know???
By pressing volume down + the red soft reset button will take you to the bootloader.
The Topaz is yours, what language is it??
Maybe this post will help you:
http://forum.xda-developers.com/showthread.php?t=507232
I went to the bootloader by pressing volume down + ON/OFF button. However, at the bottom of the screen it says (Serial)...
My Topaz language or original ROM is (RUU_Topaz_HTC_WWE_1.39.405.2_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship).
volume down + the red soft reset button will take you to the bootloader.
Download the rom and flash it in bootloader, (tricolour screen).
Sorry but i can´t make it easier.
ark666,
I already went to the bootloader (tricolour screen) and I have a copy of the rom (at my desktop). The point here (correct me if I'm wrong) to flash it in the bootloader by doing these:
1- Go to bootloader....
2- Connect D2 to my PC through USB cable...
3- Then run the downloaded ROM...
Sorry but I'm still new to PPC....
Flashed the origial ROM and problem solved.
THX
hello,, I hope someone can help me with this becouse Im new:
Im trying to install android on my t5388i chineese(diamond 2) dual sim,,that has only wm6.5, I tried putting different versions of android,,but I couldnt ,, and I think the problem is my hspl because I´ve not update it,, and when I want to check my hspl version in my phone,, I cant enter in bootloader mode to see it,, I´ve tried to enter in bootloader mode with all kind of buttons combinations but I couldnt, then Im afraid to update the hspl without known my actual version of hspl and loose my phone.
In many post say that the combination to enter in bootlader mode is vol- and soft reset,, but even with this nothing happens, my phone boot like normally, Im so tired because I dont have any result.
Please help me to enter bootloader mode on my version of phone t5388i chineese(diamond 2)dual sim... or what can I to do to update my spl without loose my phone ???
sorry about my english
THANKS...
maybe this way can successfully get into bootloader mode :
- Turn off the phone.
- While pressing the VOLUME DOWN button, power the phone back.
- Continue to hold the VOLUME DOWN button until the display 3 color - appears. At that point, release the button
Hi,
I am unable to enter boot loader mode or switch on my device after flashing rom. i believe it has been bricked. i have used the camera button and power button,but no luck. please let me know if there is a way.
Hi, I need to flash this Demo Mode HD7, but can't enter the bootloader since the power and volume buttons seem to be inoperable. I assume they are disabled in demo mode?
Any ideas how to flash this thing otherwise? It boots up when plugged in, and can only turn it off by removing the battery.
Thanks for the ideas,
Kevin
Your right, the power and volume buttons are disabled in demo mode. To flash a rom you have to be able to enter your bootloader. The only other way to flash a rom without entering your bootloader would be to use Jtag or a Riff box to install the rom on the device for you.
If you found this helpful please click the thank you button!
hello
I it is very importent
I dont have the power butten in my devise sgs1 i9000
and also the motherboard is damaged so Icant conect new power conector.
I need to get now to recovery mode
does any one have an idea how to get into recovery mode an alternative way??
I have jig and I can get into download mode and also can restart with the " Odin Force Reboot .tar File (for those who are lazy)" ( you can find here http://forum.xda-developers.com/showthread.php?t=1766399)
but I need now to get into recovery mode.
I an now in the middle of reintall all from the beging with CleanAll_files.zip install
please if some one know how to fix it
or any other way to get into recovery mode.
thanks sagi