Database Develop

[Q] How to unbrick my I9000

Hi,
Unfortunatelly I started playing with my I9000 without reading enough and bricked my phone completely (?). If anyone can help please do so.
Description:
1. I tried to flash with Odin new firmware but after flasing and rebooting got message "unable to update media ...." (or something like that) When powering on I got only welcoem screen with phone name
2. I wanted to repeat flashing but Odin could not start reflashing (I still could go into Download mode)
3. I found at xda forum [STOCK ROM] Odin3 One-Click Downloader,
but I didn't notice that it was for Captivate (I thought it is just another name for I9000,now I don't know why)
4. I reflashed my i9000 and after reflashing got only At&t screen turning on and off, without possibility to enter into download mode.
Actually I'm stuck with this situation I feel really stupid, but by mistake I did what I did.
Is there any chance to help ?
Thanx in advance.

according to some users, you might get lucky, and might be able to recover
let your phone stay on on that loop, wait until it turns itself off
then try the 3 button combo again
if all else fail, contact samsung tech support, which will simply send you back to your cell phone place

I'll try but I'm not very optimistic

Waiting doesn't help - I tiried all possible 3 or 2 button configurations unsuccesfully.
Anyone has any other idea if antyhing can be done with the issue ?

The exact same thing happened to me. There is nothing you can do except to bring it back to Samsung. I brought mine back and they have to replace the whole motherboard

what did you tell them? is it going to cost you?

diehard2222 said:
what did you tell them? is it going to cost you?
Click to expand...
Click to collapse
I told them my phone cannot boot. Can they help to reflash the FW and see if it helps. They did and said phone still cannot boot after reflashing. Hence they have to change the motherboard. I asked and they say it's under warranty...

The shop where I had bought my I9000 sent it to Samsung - I will see what they do with it.

I have flashed a vibrant with a i9000S software but the radio did not work quite well. Since the two have different keys, now i cant get it to boot mode. i was able to get into recovery mode via ADB but all i can do is use vol to go up or down and not select an option. the device wont even get out of recovery mode.
Any help will be greatly appreciated.

Same
I did the exact same thing and couldnt get it to go past the AT&T logo i took mine to the samsung authorised repair centre and after 3 days and 49 dollars they fixed it. I dont know how they did it because i couldnt get USB to reconginise or download mode or anything just stuck on white screen but they managed to get it up and running.
So even though it cost 49 dollars to fix it via software method it is better then spending 800 on a new phone or 300 for a new chip which they originaly qouted me. So there is hope with proffessional services

now, the magic usb plug is avaliable in ebay, it can turn your bricked phone into download mode in a few seconds. really good!!!

Hehe... ...the magic is one usb connector an 301 kohm resistor
Br:25011
h***://factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/

[Q] Black screen glowing button

Phone was flashed to 2.2, however after shutting down the phone and booting it up again, I get Black SCREEN + glowing buttons.
Device : Samsung i9000 from Bell running flashed 2.2 Rom.
I've tried following this guide :
STAGE 1 (applies only if you are coming from an earlier Froyo build)
* We are now going to flash the XWJM8 firmware again (Éclair), so make sure that you load the files for this firmware in Odin.
* In PIT, load the 502.PIT file
* For PDA, select the ‘CODE_I9000XWJM8.tar.md5’ file and for PHONE, select the ‘MODEM_I9000XXJM4.tar.md5’ file. Leave all others blank.
* Make sure that the Re-partition box is checked. All other settings should be as shown in the screenshot below.
*Sorry can't post link, forum restriction*
After stage 1, Odin says Passed, my i9000 reboots with still a black screen+ glowing buttons.
I want to start Stage 2, however I can't find the file ‘JPO_JPO_U_JPP.tar’ file.
I've looked up for solution for the last 2 days and can't seem to find a solution anywhere.
Things I've tried on my own without sucess :
Flashed again this time with a CSC from bell, I've read that sometimes without CSC flashing can't be done, but even with the CSC files, my phone is still ''bricked''
Anyone have any idea how to fix this? Ultimately, I want to go back on 2.2 but for now, I just want my phone to boot again =(.

Hate to say it but it sounds like yout internal sd card is dead like MANY OTHERS who have flashed... No way to fix except to send for repairs to bell/samsung...
Sent from my GT-I9000M using XDA App

I wish you'd stop stating that flashing fubar's your phone. Many people running stock, unrooted devices are reporting the same problem.

Isn't there a way to try and access internal sd card?

Have you try doing a factory reset?

Yeah, I've tried doing so, after reading and researching online, I think this could fix my problem.
forum.cyanogenmod.com/topic/6433-solved-messed-up-partitions-on-internal-storage/
see reply #7
However adb doesn't even reconize the phone =/

terranq said:
I wish you'd stop stating that flashing fubar's your phone. Many people running stock, unrooted devices are reporting the same problem.
Click to expand...
Click to collapse
I diddnt specifically mean that it was the flashing that did it but it is OBVIOUS that it happened after he flashed right???
It is known that flashing will sometimes "speed up" the death of an already faulty sd card and that is what I meant by my original post...
And PS... The number of people reporting their sd cards failing on stock firmware w/ no lagfix or no previous flashes to "unofficial firmware" is WAY lower than those reporting sd card death after flashing or adding lagfixes, etc...

Which obviously points to an existing hardware fault that is exacerbated by flashing, not caused by flashing

terranq said:
Which obviously points to an existing hardware fault that is exacerbated by flashing, not caused by flashing
Click to expand...
Click to collapse
And again... I did not specifically state that it was the "flashing" that killed the OP's phone. I simply stated that this seems to happen to MANY people after they flash. NOT the same thing...
Did you come to this thread to argue or to help the OP? I simply posted a reply last night stating that it seems his internal SD card is dead so that he could prepare himself for having to send it away for repairs. I did not respond to the OP to get into an arguement with anyone over "what causes the internal SD cards to fail".

Don't argue guys! I appreciate all your help
What is the best way to ''fix the internal sd card''
Isn't there a way to like factory reset the internal sd card.

cuem said:
Don't argue guys! I appreciate all your help
What is the best way to ''fix the internal sd card''
Isn't there a way to like factory reset the internal sd card.
Click to expand...
Click to collapse
@cuem,
Unfortunately... If it is an actual dead internal sd card (which it seems to be since the steps you followed already did not seem to fix the issue) the only way to fix it is to send it back to Bell who in turn will send it off for warranty repair.
IF you have just purchased the phone within the last 30 days (possibly 60 if Bell is still extending the DOA return policy) and you have a receipt you can take it back to Bell and get an exchange.
Again, unfortunately these are your only options to get this fixed...
Sorry to be the bearrer of bad news...

Just when I think this couldn't get worst,I was wrong.
I tried using Odin3 One-click downloader, I wanted to flash it with At&t stock firmware( hopefully it would work) then flash it again with 2.1 clair
After using Odin3 One-click downloader, it said sucessed, but now my phone is STUCK on At&t blinking logo and I can't go into download mode anymore.
I've tried the 3 keys combo, adb doesn't reconize the phone.
I'm pretty much screwed,warranty won't work if Bell sees At&T logo blinking upon power up.......

cuem said:
Just when I think this couldn't get worst,I was wrong.
I tried using Odin3 One-click downloader, I wanted to flash it with At&t stock firmware( hopefully it would work) then flash it again with 2.1 clair
After using Odin3 One-click downloader, it said sucessed, but now my phone is STUCK on At&t blinking logo and I can't go into download mode anymore.
I've tried the 3 keys combo, adb doesn't reconize the phone.
I'm pretty much screwed,warranty won't work if Bell sees At&T logo blinking upon power up.......
Click to expand...
Click to collapse
Ooooooo... That is not good. The American Vibrant is NOT the same as out i9000 models.
What you need to do now is search the forums for the homemade jig thread that will force your device into download mode. Search the forums and you will find it.
Be prepared to be "handy" as you will have to build the jig from scratch...
Sent from my GT-I9000M using XDA App

Yeah, I've read about the Jig thing, I've also read about heating your phone with a hairdryer,
I'm currently trying out the hairdryer, but it doesn't work =/
Might have to try the Jig thing, which seems a little complicated with ordering since I'm running out of time =/

Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.

This has happened to me, I just flashed with an older version, for me JM5 worked fine.

cuem said:
Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.
Click to expand...
Click to collapse
I had the same thing after flash and spent many hours and tried many different methods to get it back up with no success.
I'm leaving the country for Europe on January 2nd for vacation. This was the last thing I needed... Hopefully I get it back before then, but I'm not holding my breath.

cuem said:
Jig worked, im back to my intial problem.
BLACK SCREEN + GLOWING BUTTON.
Click to expand...
Click to collapse
Well... At the very least at least the firmware is now correct so you can send it away for repair if you need to...
Sent from my GT-I9000M using XDA App

I followed this guide
http://www.tunandroid.com/content/i...du-firmware-i9000xwjpa-pour-samsung-galaxy-s/
I believe now oneclicklagfix is installed on my device, can I flash again or that'll brick my phone, how do I uninstall oneclicklagfix if I can't boot up the phone but only acesss clockwork mod menu?

[Q] Stuck on logo screen suddenly. Ideas?

Hi,
Last night my Galaxy S was low on battery, and I kept trying to turn it on for it to die right away (it was working as expected I guess)
This morning after I charged my phone it wouldn't turn on at all! It loads to the logo screen, makes that jingle sound and then holds and doesn't turn on.
I can get to recovery and download mode.
I put OCLF on like 2 months ago, but haven't modded/flashed ANYTHING since. It is very bizarre how it just died.
I'm wondering what my options are now. Obviously I would rather not loose all my personal files. Since I can get into download mode, can I just flash a new firmware? I'd like FroYo anyway, but I haven't got a clue what to do.
Great start to the year – !
Cheers,
Mitch
EDIT: I just decided to try the "Clear User Cache" option and then reboot to no avail. Now I can't get back into recovery mode!?!? Download mode still works. Huhh?? Is this expected? Have I lose Recovery Mode entirely now? Crap.

seeeems like an odin flash via the download mode is the only way. There are a few tutorials on this site and even tut vids on youtube so you should be fine if you just follow everything they do (as long as it works for them of course)

How do I know what version to flash? I have read a few tutorials and they all have started with "Dial x and check you have y" etc. Obviously I can't do any of that.
What is the *safest* firmware I can flash?
My phone currently has some optus variety.
Please forgive the noodish question.
Mitch

Where are you located? And who is your provider?

Hi,
I'm in Sydney Australia and my provider is Optus.
Thanks

Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You

m1tch37 said:
Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You
Click to expand...
Click to collapse
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.

Sounds like you'll need to do a flash of a stock rom..
By the way, the old oclf had some issues that might lead to system corruption (unfortunately I'm not very sure exactly what it does, or whether it could lead to this problem). I'd suggest getting one of the newer lag fixes available here when you do get your phone running again

tragusman said:
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.
Click to expand...
Click to collapse
tragusman has got it right. Depending on what the issue is, you'll either recover nicely or your phone is toast. Flash the above stock firmware and give it a shot. Note that you'll likely loose your data and settings.
If you're new to flashing firmwares, check the great reference guide on where to find Odin and how to use it (this is the app you'll use to flash the above firmware).
http://forum.xda-developers.com/showthread.php?t=723596
After flashing, try getting into recovery mode. If you can look for an error message under the standard menu. Can't get to d/l mode? You're probably in trouble. Get into recovery and see an error msg? Post the error here or google it for a solution. No error msg? You're probably ok - restart the phone.
Good luck.

Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch

m1tch37 said:
Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch
Click to expand...
Click to collapse
If it's broke, you can't break it any more I've sent phones back in for support after flashing back stock firmware (flashing it after it "died").

[Q] Bricked Phone PLEASE HELP!

Ok guys, clearly I'm new to all this. I've only had my Galaxy S (I9000m Bell) for 3 days now and already managed to brick it.
So here's what happened, I wanted to flash CM7, what I did was rooted obviously, I unlocked since I'm with Rogers and the phone is from Bell. Installed Rom manager, titanium back, Terminal emulator, Astro, etc. So I'm pretty sure I have the required tools. I also flashed SpeedMod Froyo [K13D HPCall VoodooSnd4 SharpnessFix STABLE].
Alright so I noticed I couldn't boot into recovery from CWM even though I flashed it using Rom Manager, I tried fixing this for a while with no luck. I then came upon a thread discussing the 3 button combo fix for download mode. I wanted to get this done just in case what happened happened lol
So anyways, I couldn't find instructions for Mac so I tried putting the pieces together using terminal and Heimdall.
The last thing that happened to my phone was that I was able to get into download mode using adb reboot recovery.
However continuing to the next step to apply the fix wouldn't work for me using heimdall, it would just fail.
Being the idiot that I am I decided to exit in terminal, closed heimdall, turned off the phone and turned it back on and guess what...yup I'm screwed. It's bricked.
Now the problem is I don't have 3 button fix, so I can't get into download mode (even if i did, i wouldn't know what to do).
I read about the jig fix but I don't know if i have any other options, hopefully something faster that I can do myself instead of buying the jig and having to wait for it to **** from ebay.
Sorrry for the longgg post and hope anyone here can help me! Thanks
PS. I tried using terminal again to get to download mode like i did the first time (adb reboot recovery) and it didn't work...it said no device found or something like that

Hi It seems your only option short of looking for a repair shop or sending phone to Samsung is to try the JIG. If you don't know how to approach this print any of the diagrams or guidelines e.g. look here.
What you can do is go to electronics part shop and ask for help with the jig ask the man to wire the resistors to the pins in usb plug just to see if the phone kick starts if not, well you're screwed.
If it works just buy it if not, google for repair shop with Riff Box and JTAG adapter for I9000 it takes about half a bell to do it (repair I mean). But if it's new you have to return it in for repair.
I guess you should get the jig one way or another, either visit electronics parts shop, ebay-it
hope this'll help somewhat.
cheers

If you're in the vancouver area, you can swing by and use the jig I made

Thank you both for the feed back.
@Tony I'm actually in Ottawa. I found someone on Kjiji that also made his own but wants to charge $10 and he lives too far away so I just went ahead and ordered one off ebay for $9 with shipping.
I read on the xda thread regarding the JIG that it the phone doesn't boot at all and just shows a black screen with the bricked image (as opposed to loading the carrier name or samsung with a white screen before) that it won't work and that is my case. Anyways I hope it works, just gotta wait and see I guess. I just don't even know what the next step would be. What do I do once I'm in download mode? :S
EDIT: NVM about the whole white screen, black screen thing, it says that the JIG should work if I see the PC-Phone logo which I do.

Three days huh? Wow, when you do it, you really DO it. Reading your description it sounded a bit like a Med student doing a brain transplant.
First I would just take the phone back to your carrier or service center and say you have no idea what happened, pay the money and have them sort it out. I fear there is no easy way out of the hole you have dug.
Next you should spend a few hours reading as much as you can here and then start small. Ask questions before you do anything. Root the phone. Try a few different kernels and lagfixes. Maybe flash something from doc's kitchen or a custom ROM. Make sure you know in advance what could go wrong and how to handle it, as much as possible. Once you have some experience then try something like cm7, which is very much a beta on the sgs and quite complex to flash and set up.
Spend a little time walking before you run (no matter how much you think you know) ...you'll enjoy the trip more.
Sent from my GT-I9000 using XDA Premium App

rschenck said:
Three days huh? Wow, when you do it, you really DO it. Reading your description it sounded a bit like a Med student doing a brain transplant.
First I would just take the phone back to your carrier or service center and say you have no idea what happened, pay the money and have them sort it out. I fear there is no easy way out of the hole you have dug.
Next you should spend a few hours reading as much as you can here and then start small. Root the phone. Try a few different kernels and lagfixes. Maybe flash something from doc's kitchen or a custom ROM. Once you have some experience then try something like cm7, which is very much a beta on the sgs and quite complex to flash and set up.
Spend a little time walking before you run (no matter how much you think you know) ...you'll enjoy the trip more.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Haha I can't take it back to the carrier, I bought it off kijiji, it's from Bell and I'm with Rogers. I unlocked it and as far as I know Bell is really bad with their warranty and last time I bought a Blackberry that was locked to Bell and unlocked it I was told by Bell that I need a receipt, which I obviously don't have. I would rather throw the phone away and buy a new one than have to deal with carriers.
I'm just gonna try the JIG I guess since I already ordered it. Hopefully doesn't take too long to get here.
And yes, I definitely need to read more and follow the instructions on a Windows PC instead of trying to put bits and pieces together and try to get everything working on Mac.
It seems however that the more I read the more I get confused, is it just me or are there so many different ways to achieving the same thing?
Anyways, I bought this as my first Android to experiment and learn on and so far that's what I've been doing. I'm not afraid of running into problems, I'll try to enjoy fixing them

mike1089 said:
Haha I can't take it back to the carrier, I bought it off kijiji, it's from Bell and I'm with Rogers. I unlocked it and as far as I know Bell is really bad with their warranty and last time I bought a Blackberry that was locked to Bell and unlocked it I was told by Bell that I need a receipt, which I obviously don't have. I would rather throw the phone away and buy a new one than have to deal with carriers.
I'm just gonna try the JIG I guess since I already ordered it. Hopefully doesn't take too long to get here.
And yes, I definitely need to read more and follow the instructions on a Windows PC instead of trying to put bits and pieces together and try to get everything working on Mac.
It seems however that the more I read the more I get confused, is it just me or are there so many different ways to achieving the same thing?
Anyways, I bought this as my first Android to experiment and learn on and so far that's what I've been doing. I'm not afraid of running into problems, I'll try to enjoy fixing them
Click to expand...
Click to collapse
You are right that there are different approaches to doing the same thing...often it is just a matter of what works for you.
Once you have a jig you will have no trouble going in to download mode. From there anything is fixable using odin. I would suggest reading the thread about darky's resurrection ROM which is a good place to start from when you have had trouble.
Just remember to do your homework and enjoy the process.
Good luck.
Sent from my GT-I9000 using XDA Premium App

rschenck said:
You are right that there are different approaches to doing the same thing...often it is just a matter of what works for you.
Once you have a jig you will have no trouble going in to download mode. From there anything is fixable using odin. I would suggest reading the thread about darky's resurrection ROM which is a good place to start from when you have had trouble.
Just remember to do your homework and enjoy the process.
Good luck.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sounds good, will definitely keep that in mind. Thank you for your help, very much appreciated.

Hey guysss!
I just wanted to let you all know that I am a biggg IDIOT! LOL
So I ordered the JIG from ebay and on my way home I went to a couple of electronic stores to try and buy those resistors because I wanted to make my own JIG as well. Anyways, all the stores were closed and my friend told me he can grab the resistors from his lab tomorrow (engineering students lol)
I obviously don't want to wait till tomorrow. I came home and decided to take out the phone from its box again. This time I did the 3-button combo but in a different way, not using volume UP + DOWN + power but I came across a Samsung PDF explaining the Anyway JIG and it showed to press Volume Down + Home button + Power.
I gave that a try and voilà!!! I'm back in download mode! YAYYY!
I'm afraid to turn it off or pull the battery out cuz I don't want to risk ruining it even more so I'm gonna go ahead with rschenck's suggestion and use Darky's Resurrection Rom!
Thank you all for your help!!

Uh oh...one last problem
So as of now I am able to access Download Mode but not Recovery:S
Any ideas?

mike1089 said:
Uh oh...one last problem
So as of now I am able to access Download Mode but not Recovery:S
Any ideas?
Click to expand...
Click to collapse
If you can get to download mode you are fine for the moment since that is what you need for odin. Follow one of the guides for using odin here at XDA exactly, and good luck.
Sent from my GT-I9000 using XDA Premium App

Ok so after download mode, I followed the steps to reflash stock, i downloaded the same JL2 that I had prior. Odin said passed but the phone wouldn't boot, it would just get stuck on S in the boot screen...
I did a complete wipe data/cache through recovery and that didnt help.
I then thought I would give Darky's Resurrection a try since it wipes everything anyways...odin again said PASSED but there was a sign of a circle on the screen and it didn't boot. I did it again, said passed again and this time im on a endless boot loop. It turns on says samsung i9000, etc. and then blinks and does it again.
I am still able to get into download mode. I just don't know what to do anymore

Download mode = Yes
Then download stock firmware from samsungfirmwares.com not 2.3.3
or from link
http://forum.xda-developers.com/showthread.php?t=846913
Download ODIN
Flash stock firmware through Odin with pit 512 and repartition checked .
If that fails try Eclair firmware 2.1
jje

JJEgan said:
Download mode = Yes
Then download stock firmware from samsungfirmwares.com not 2.3.3
or from link
http://forum.xda-developers.com/showthread.php?t=846913
Download ODIN
Flash stock firmware through Odin with pit 512 and repartition checked .
If that fails try Eclair firmware 2.1
jje
Click to expand...
Click to collapse
Ok so I did the above instructions and I the same happened. I am on JL2 now but it wont pass the boot screen (Stuck on the S). I did check repartition and 512 pit and pda.
I also have this error:
Can't mount DBDATA: copy default media content failed
My question is if I try eclair will I lose 3 button fix? From what I was able to gather the 3 button fix for Bell I9000M only came out with JL2.
Will I lose it or is it permanent once I have it?

[Q] Samsung Captivate hard bricked. HELP.

So the other day i was on my captivate and i had just factory reset it to original eclair. so i tried updating it with kies but it kept failing. So i then tried using Odin and accidently checked bootloader and now my phone turned off and wont show any signs of life. PLEASE IM ASKING YOU PLEASE HELP! What do I do?

Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.

4-2ndtwin said:
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
Click to expand...
Click to collapse
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated

Theboss14 said:
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Click to expand...
Click to collapse
It doesn't format the bootloaders per say, it you flash a stock ROM with Odin that has bootloaders and if it gets interrupted while it's replacing them, your phone will be bricked as it doesn't have a way to boot (hence the name bootloaders).
The JTAG service basically pushes the bootloaders into the phone. It's something we can't do on our own unless we have the right equipment (riftbox).
Like 4-2ndtwin mentioned, try to get some response from your phone, anything that would show life. That means you can recover on your phone. From there, you'd have to be able to get in download mode and flash Odin KK4 without ANY interruption.

My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?

Theboss14 said:
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Click to expand...
Click to collapse
Try the button combo to get in download mode (could even try a jig). If that fails too, you'll have to get jtag service.
Sent from my SGH-I747 using xda app-developers app

:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.

Theboss14 said:
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Click to expand...
Click to collapse
The only alternative I can suggest you is to find that service around your place, hopefully for cheaper.

Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3

Theboss14 said:
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Click to expand...
Click to collapse
Kinda hard to know. look at the seller's rep Imo.

Samsung Captivate is dead, unable to go in download mode....
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325

Jtag. The only possible way out.
Sent from my GT-S5282 using xda premium

vishu_10d said:
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Click to expand...
Click to collapse
From what I've read in your thread, you had the i9000 image working, correct? If so, why not just roll with it?
All Captivate/i9000 rom works with the i9000 bootloader. Captivate GB Rom will need to get the 2.3.5 i9000 Music Player APK, but aside from that, it all works. AOSP roms like Cyanogenmod and Slimbean will work out of the box if you get the captivate version. To install them, you'll need a slight workaround though:
Flash a kernel with CWM.
From there, flash the Captivate Glitch Kernel V13. It only comes in .ZIP format, which is why you need a CWM kernel before hand
Flash CM7 to convert the partition table(IMPORTANT. Rom will not boot if you skip this step.)
Flash anything from here on. If it throw a status 7 about device not being SGH-i896/SGH-i897, etc..., flash the Glitch Kernel before attempting to flash the ROM. You do not need to flash CM7 again.
(I know other ROM should have converted the partition table, but in reality it doesn't. Since you're flashing from Glitch, a CM7/MIUI kernel, they assumes you already have the MTD partition layout, and only resize it instead of doing a full conversion. CM7 check the partition table regardless of which kernel you're flashing it from.)
As a plus, Deep Idle works only with the i9000 bootloader. You'll get sleep of death otherwise. If you want your ATT World Phone image back, you can flash the custom param.lfs and change it manually. This can only be done from Touchwiz ROM though.