[Q] Tethering, USB Ejecting USB; Safely Remove option is gone... - Hero CDMA Q&A, Help & Troubleshooting

I installed the driver needed to tether USB using cm6 and windows XP. It works fine, but I lost the ability to safely remove hardware in the taskbar in lower right on my PC. I tried to turn on the USB storage on my phone, it worked on the hero's end but it did not show up on my PC, normally it is E: drive. So I tried to disable Android USB Ethernet in the device manager, thinking it would pick back up as a storage device, no luck. I even scanned for hardware changes ADB is not seeing my phone either! This is getting worse and worse as I type!
OK I used USBDeview to uninstall the tether from usb ports, and device manager to uninstall the driver for the usb tether. I then restarted my PC plugged up the ol hero and everything is back to normal However my question is; Can I reinstall the USB tether driver for WinXP and be able to continue to use ADB, and mount SD, not all at once but as it was I could not do that. Once I installed USB tether I lost all ability to ADB and mount my SD for drive E: on the PC. I even tried disabling the USB network adapter using device manager. I guess its wireless tether from here on out?
Thanks for the help

Anytime you use usb tether, you can't use storage or adb. And it's a known bug in cm6 that stopping tether does not restore usb/adb use unless you reboot your phone. My fix is to use wired tether for root users. Of course you still can't use adb and tether at the same time, but when you stop it, adb returns.
Sent from my HERO200 using XDA App

So I reboot phone and I can use storage and adb again, without uninstalling the USB driver for tethering. Good to know, Thanks!
Sent from my HERO200 using XDA App

danaff37 said:
Anytime you use usb tether, you can't use storage or adb. And it's a known bug in cm6 that stopping tether does not restore usb/adb use unless you reboot your phone. My fix is to use wired tether for root users. Of course you still can't use adb and tether at the same time, but when you stop it, adb returns.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Reinstalled usb tether driver and tested, good. Rebooted phone and was able to adb and mass storage!
Thanks

Try that wired tether app, just google it. You don't have to restart the phone when you're done using it to usb tether
Sent from my HERO200 using XDA App

danaff37 said:
Try that wired tether app, just google it. You don't have to restart the phone when you're done using it to usb tether
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Awesome! Just installed and like the fact I dont have to reboot, I dont have to tether often but when I do I like it to be easy.
Thanks

Related

[Q] Help with Connecting to Computer

I need help with mounting my phone. I'm currently running CM6 and last night I USB tethered the thing for the first time. It worked and everything, but now when I connect my phone via USB and try to mount it the computer doesn't recognize it, well it does recognize it as a network adapter (HTC Remote NDIS Device #2). Please help, I'm trying to remove the battery tweak but it would also be nice to be able to mount my phone again. Thanks all.
Make sure you have "debugging on" and "charge only" when connecting your phone. If those two things are not your problem, try uninstalling HTC sync and drivers, reboot your computer and reinstall HTC sync.
I'm having a hard time finding "debugging on" and "charge only" options in CM6. Where should I look. I also have not been able to mount my SD Card on My Computer since the install.
Thanks.
Reboot your phone. Known bug with cm. You can't usb tether and connect drive/adb at the same time period, but cm6 gets stuck till you reboot. Easiest solution, google wired tether for root users. Lets you usb tether but starts the other drivers up fine when you're done so no reboots needed.
Oh, and charging only is not an option on cm6, that's the default anyway, you always have to manually mount sd. Debugging is in settings/applications/development
Sent from my HERO200 using XDA App

My phone isn't bringing up the mount option?

Well, when I plug my phone into either my ps3 or computer the phone will recognize that it is in USB, but in the pulldown menu it gives me no option to mount it. What would cause this? I tried restarting my phone, but that didn't help.
Sent from my SAMSUNG-SGH-I897 using XDA App
Settings -> Application -> USB Settings -> Ask on Connect
As long as your pc doesnt display a message telling you the device has malfunctioned and windows doesnt recognize it its more than likely configuration issue with your phone.
the usb connection interface is wonky and Ive replaced one phone already because it failed completeley.
Good luck hope this helps.
I don't think that would have fixed it anyway. It recognized that it was connected in mass storage, but it just didn't give me the option to mount it for some reason. Anyway, I got it to recognize it after I kept switching mass storage on and off
Sent from my SAMSUNG-SGH-I897 using XDA App
That's what I've always had to do with mine. Seems yo work fine everytime.
yentlequible said:
I don't think that would have fixed it anyway. It recognized that it was connected in mass storage, but it just didn't give me the option to mount it for some reason. Anyway, I got it to recognize it after I kept switching mass storage on and off
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Sent from my SGH-I897 using XDA App
You never mentioned you had USB debugging enabled? Did you?
I am using a Custom ROM and from time to time my computer doesn't recognize that I have connected my phone via USB. I usually can be sure on my Computer Explorer isn't opened then disconnect and re connect USB cable. Also if my phone has been connected and I haven't Mounted and phone "goes to sleep". I have to disconnect USB,Wake the phone and then connect USB and immediately Mount.
flashman2002 said:
You never mentioned you had USB debugging enabled? Did you?
Click to expand...
Click to collapse
I tried it with debugging on and off...
RonH54 said:
I am using a Custom ROM and from time to time my computer doesn't recognize that I have connected my phone via USB. I usually can be sure on my Computer Explorer isn't opened then disconnect and re connect USB cable. Also if my phone has been connected and I haven't Mounted and phone "goes to sleep". I have to disconnect USB,Wake the phone and then connect USB and immediately Mount.
Click to expand...
Click to collapse
It wasn't my computers problem though, thats the thing... It was something with the phone. I still don't know exactly what is causing it, but this is not the first time it has happened.

USB Tether on a Mac

I need help setting up USB tethering from my hero to my Mac. I'm using hero deck gingerbread rom and have the USB tether option available, but I don't know what settings to input on my Mac in order for it to work. Does anybody know? I know that I can use wifi tether but would prefer to go via USB since the phone gets so hot. Any help would be greatly appreciated!
Sent from my HERO200 using XDA App
ebtek220 said:
I need help setting up USB tethering from my hero to my Mac. I'm using hero deck gingerbread rom and have the USB tether option available, but I don't know what settings to input on my Mac in order for it to work. Does anybody know? I know that I can use wifi tether but would prefer to go via USB since the phone gets so hot. Any help would be greatly appreciated!
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
It's gonna get hot anyway it's the 3G radio that makes it hot and uses up the battery. You should just plug the phone in with usb and use the wireless then you can feel like you have a wired tether. If you plug in the phone to the computer you will burn the battery faster than the computer can charge it. Plug it into the wall to get a stronger charge.
I've found that I get faster speeds via USB on my ubuntu pc. I wish there was a way to get it to work via USB on my mac.
Sent from my HERO200 using XDA App
I used to use an app called pdanet http://junefabrics.com/android/ to tether to my mac.
It has two parts, an app for the mac and an app for the phone, you installed both and it set up a wired internet connection. Worked great for me.
the native usb tether dosnt work on mac for somereason however pda net and easy tether has a desktop client for mac that works.
or you could try usb tether from google.code it should work on mac
Thanks for the help! Pdanet works very well. It's very odd, at times I'll have solid download speeds and other times less than desirable speeds. I wonder why that is.

Steeldroid question

Id love to post this in the development forum but not enuf posts so... I flashed steeldroid the other day and I love it, especialy with the GB launcher I added. Problem is, I can't get it to come out of charge only mode when hooking to the computer. It never gives me the option in the notification bar. Is there any other way to change it? Anyone have any ideas? I appreciate any help
Sent from my DROID3 using XDA App
Try a different cord, usb port, or computer. It sounds like it's not establishing a connection
Sent from my DROID3 using XDA App
Tried 3 cables. Charges fine. I have all the current drivers and everything on the computer.
Sent from my DROID3 using XDA App
I had a similar problem. My phone would not show it is charging past 95% but it would still increase the charge. I am waiting for the newest update before i dig into it myself.
Sent from my DROID3 using XDA App
I've got a similar issue on SD3 v3. I get the connect choices (PC, mass media, media sync, charge only) but i can't get mass media mode to connect on my windows 7 x64 machine. I get the bonk when the computer detects its connected, but don't see anything in device manager. Found a work around at least for the moment, put it in PC mode, and used the moto software, I can get into my internal card.
right, see i dont even get the connect options when i plug in. i am thinking it is something in the rom because it worked fine with the first cable i tried just before i flashed it. i know i could just restore to the nandroid backup of stock and do what i need to do but i dont wanna do that if i dont have to id rather make it work. is there a specific service or apk that controls the usb connect options that i can check?
Are you guys using the cord that came with the phone?
Yes all of my cables are motorola cables. The one i use for the computer is the cable that csme with the D3
Sent from my DROID3 using XDA App

Samsung Captivate non-existent when plugged in via usb to windows

Ok, so I just got this samsung captivate and I want to root it. I can't get anywhere close to rooting it because when I plug it in via USB, windows doesn't do anything. I have my phone set to USB debugging and sometimes I have to unplug/replug the mini usb from the phone several times before it actually goes into "USB Debugging" mode. I have installed the necessary drivers but windows still does not acknowledge that I am even plugging in the phone via USB. I have tried downloading kies and that didn't work either. I don't think anything is going to work until I can make windows acknowledge that the USB device is even connected. I have also tried the *#7482# trick and it didn't help. Could it be another setting on my phone or something that is preventing my phone from connecting to my computer? It is really starting to agitate me because I want to get rid of all this crappy bloatware.
Maybe this stickied thread in the General forum can help... Captivate Connection Issues....
Sent from my SAMSUNG-SGH-I897 using xda premium
Turn USB debugging off and check if it sees it then...
Sent from my SGH-I897 using xda premium

Categories

Resources