[Q] Kies not connecting suddenly - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi ... I own a 20 day old galaxy S and i also managed to upgrade the firmware on kies to the JG4 version you had there, but suddenly from yesterday, for no reason, every time I connect the micro usb cable to sansung kies, the phone stops reading the external card and I am unable to connect to samsung kies... I have to restart the phone for the SD card to be available again...I thought is was a problem with the card itself, but the same problem arises when i use a friends perfectly operating SD Card.. also the phone screen says 'initialising Samsung Kies and suddenly keeps flashing to MTP application (home screen)... how can a NEW phone begin doing somthing like this .. please help with an answer asap. How do I connect to Kies without disabling my SD cards (internal and external)?

Do you have Launcher Pro running? If so disable it.

Sometimes even a simple restarting the phone will solve this problem.. (Personal experience)

Related

[Q] How To Get Kies to Work

So, after doing all the research work on getting kies to work for my SGS iam still looking for a solution.
Some details-
SGS running froyo (2.2), Root, OCLF applied.
Things I tried-
1.Installed atleast 3 versions of Kies including the latest 2.0.0.11014_49
2.Uninstalling USB Drivers and Kies - restarting- fresh installation
3.Factory reset on phone.
4.Format internal SD card.
^ all in vain.
The problem is when i connect my phone to my windows 7 (SP1) ultimate netbook, all the drivers get installed ( Samsun_android and CDC) successfully.
but when i open kies it sometimes keeps showing connecting till infinity and sometimes it gets stuck while doing that and i have to kill it via task manager.
..Now i know its a very common problem most SGS users are facing, but somehow everyone has found a way out.Me still stuck.
Any Ideas/Suggestions/Discussions most welcome !
Thanks in Anticipation !!

[Q] Problem with USB connection

I bought my Galaxy S i9000 , three days ago, and I have problem with USB connection, when i plug in My phone, choose connection pop's out, i press KIES, and phone is connected, for about 3 seconds, and choose connection pop's out again, and it goes over and over. When i turn on USB debuging, then i can connect phone normally . What seems to be a problem ?
ROM on phone is (stock) -> 2.2.1 , I9000XXJPY , FROYO.BOJS5
It is T-mobile (Croatia) phone, and nothing has been changed. On my PC i have Win 7 64 bit. Please help me.
Thank you in advance
Reinstall USB drivers..
Sent from my GT-I9000 using XDA Premium App
I tried, and it is the same i Tried with reinstalling KIES, formating SD cards on phone, even with returning phone to the Factory settings, and it just won9t
I tried, and it is the same i Tried with reinstalling KIES, formating SD cards on phone, even with returning phone to the Factory settings, and it just won9t
It is the problem, like in THIS thread, i just found it, but all solutions from this thread, just won't help

softbrick - halfdead download mode

Hey guys.
So I have a problem,
I was on darky's rom 10 and I have installed cyanogenmod7.
After that phone was woooow fast and great and everything...untill I decided to listen some tunes from external sd.
And so I have found out that I can't see external sd because I installed cyanogenmod on non froyo ROM.
Then I've tried to flash stock froyo but odin hanged a long time and I just restarted whole operation.
Now I have an icon ! that phone wants to connect to computer.
I can enter download mode with vol. down + home + power but it that state Odin cant see shiet. Only thing that can see phone in that state is windows (trying to install drivers and then fails!?) and kies (hanging on "connecting").
So, what are my options? Bricked for life? Or..... :S
k that symbol means connectivity issues, so try changing the usb port and if that fails try using another usb cable...run odin as administrator before trying all this!!
ok I've managed to get Odint to recognise it..
I've tried to flash froyo from this topic: http://forum.xda-developers.com/showthread.php?t=853950
and it doest boot, hangs at samsung/galaxy logo 4ever...
flashing darky's 9 resurection also gives no good thing.
just hangs on start samsung/galaxy logo/black screen in loop....
had the same problem as well and it was solved by plugging the usb cable at the back of the pc.
if that doesnt work try flashing other roms... you can find some tutorial on totallydubbed's youtube channel with the link of the rom in the description.
http://www.youtube.com/user/totallydubbedHD
Hey ppl,
I've had an awful fight with this phone and my brain and stupid PC.
omg
So, I have tried to flash 2.2 and it worked, then tried to flash cyanogenmod and it worked (again) but I couldn't reach external sd (again).
So I said to myself...f*** this s*** I'm going on stock,
And I did,
firmware version
2.3.4
baseband version
I9000XXJVR
kernel version
2.6.35.7-I9000XXJVR-CL425308
[email protected] #2
build number
gingerbread.xxjvr
This is what I have, and the problem I'm facing (again) is that phone or pc via USB can't recognise external SD.
Help please.
p.s. how can I easily go to cyanogenmod from here?
Kies is saying that "This version of the device cannot be updated."
Windows can't see either internal or external SD.
update;
I've installed Darky's 10.2 ressurection, something is very wrong with my phone.
Install went fine, rebooted ok.
Still no SD card, when I reinsert it, it says its blank or non supported format.
Tryed to reboot the phone and it just loops on darky's logo/animation.
Help?

[Q] Bricked Captivate & Micro USB for data broken...

Hello everyone,
I installed a rom on my rooted phone and it did not go well. Now the phone is bricked.. Normally I would be able to fix this. But a few months ago the phone stopped being recognized by my computer. Still charges but the port is damaged some how and no pc will recognize it. I can not get it into recovery I have tried and tried again and again. Still stuck in android with the triangle around it. And sometimes I will get a symbol with a phone-triangle-pc. Does this mean it is done, shot, bricked for ever? LOL
You could replace the micro usb port...
Connect phone to pc and run samsung kies it will repair files then open kies, go to tools and install drivers then get into download mode and flash with odin
michaellengyel33 said:
Hello everyone,
I installed a rom on my rooted phone and it did not go well. Now the phone is bricked.. Normally I would be able to fix this. But a few months ago the phone stopped being recognized by my computer. Still charges but the port is damaged some how and no pc will recognize it. I can not get it into recovery I have tried and tried again and again. Still stuck in android with the triangle around it. And sometimes I will get a symbol with a phone-triangle-pc. Does this mean it is done, shot, bricked for ever? LOL
Click to expand...
Click to collapse
I can fix this. Send me a PM.
I am having a similar issue. My phone is soft bricked on the AT&T splash screen with no ability to get it into recovery. The micro USB is completely non-functional.
I am (was?) running CM7 when the problem occurred. I have considered just about every option I can think of (and have had the phone together and apart twice to see if I could get the port working... no dice) including having the phone boot from an external SD card but this still seems to need some ability to get into recovery, which I do not have.
Any creative solutions (short of just buying a new phone...)
clickervet said:
I am having a similar issue. My phone is soft bricked on the AT&T splash screen with no ability to get it into recovery. The micro USB is completely non-functional.
I am (was?) running CM7 when the problem occurred. I have considered just about every option I can think of (and have had the phone together and apart twice to see if I could get the port working... no dice) including having the phone boot from an external SD card but this still seems to need some ability to get into recovery, which I do not have.
Any creative solutions (short of just buying a new phone...)
Click to expand...
Click to collapse
You could send it to the guy above to have a new micro usb port installed or MobileTechVideos.com. I had them fix a hard brick on my Captivate and would use their services again in a heart beat if I needed to.

[Q] DEAD Internal SD card? PLEASE HELP FRIENDS!!!

hey friends, I really need your help... I have galaxy s gt-i9000. I had installed RemICS-UX rom (ICS 4.0.4) there was no problem.. but suddenly one day when I connected my phone to PC, nothing happened! I mean no notification, no prompt like usually, the phone thought that I have connected it to a charger! it started charging . I removed and reinserted, again charging! I thought it was from problem and I was bored with that rom . so I installed darkyrom ics v11.0 but still same problem.
I did some tests. I tried connecting phone with different usb port, different cable, different computer but still no luck so I am 100% sure that there is no problem with my PC nor with my USB poet or drivers or my cable.. the problem is with me phone.
i did research and found link on Google on xda about SD card dead.
http://forum.xda-developers.com/showthread.php?t=1193010
So do you think my internal ad card I'd dead?
and yes By the way I can access my internal sd card through my phone.. it just doesn't connect with anyone's PC. so is my internal SD card dead? if yes please tell me how to fix it? I read that post he uses an external SD card also.. but I don't have any external SD card and I don't use any. so I request you please tell me steps without having ext. SD card... and please reply ASAP...
next time(al time) when you install new rom:wipe cache,davilk cache,wipe data from recovery after go install-from sd the rom.make this and reflash the rom.
Does RemICS have FastCharge? If yes, then disable and try again. Another option would be to try to install another kernel.
Also try another cable, maybe it's broken.
hey friends thanks for your help... but actually I don't know what happened and my phone got connected ... there was no problem with my cable and nor with fast charge (It was turned off already)... it just happened suddenly... I removed the battery and again put it in.. IT WORKED!!!!

Categories

Resources