Related
hey i'm an newbie , so please take it easy on me .
i have wizard , G4 version .
i tried to flash my WM5 to WM6 ( touchflo NBD ) using the software shelltool.
so i did everything i was supposed to , installing the cabs files and on .
but when i flash to the new version , it's disconnected while saying it's finished ( finished to write the rom ) . this was after 9 minutes - and i thought that's because i have good computer .
anyway , i hard rest my wizard - but it's get stucked on the splash screen of orange with all the version of SPL IPL .
now i get real stupid , cause i didn't know what to do , so i enter to the bootloader and tried to flash again with the shelltool while my wizard at bootloader status .
right now it's in the middle of writing the new version , but it's been more than 40 minutes , i'll guess i'll unplugged the cable cause it will stay like this for hours.
is there anyway to fix what i have done ?
please help me out !!!!
i don't know nothing about fixing the wizard with bootloader and stuff, so i need an guide .
hope for an answer thnx everyone
Same happened here. How i fixed. Downloaded wizard love rom. Get into bootloader. connect cable get usb connection. no active sync needed. Flash using RUUgetinfo file from love rom folder. not using shell tool. wait till finish. reinstall both cab files and reset. now use shell tool to flash to your choice rom. give it at least half hour to run. before disconnect even if it says program not responding. hope this helps....
yeah , i did the same and it's work .
too bad i didn't see your answer before 4 hours , i didn't sleep because of that.
by the way , wizard love is WM5 or WM6 ?
i tried to flash to black diamond and to NBD but with no luck , it's never end flash even after 2 hours !!!!!
is there any way to flash without shelltool ? maybe through RUU ?
please help us getting those flash on our wizards
You can't flash with RUU on a CIDLocked G4 That's why we want it so bad (cidunlocking )
heheh alright , so how come i can flash with RUU the wizard love edition ?
and is there any way to slove the problem with shelltool program ? cause everytime i'm flashing an rom , it's never end ...
hi all!
i got a big problem with my touch hd...
after flashing several roms, i flash since miri V20, my phone startet to hang very often. everything is working fine after flashing, but when i want to use opera via wifi for example it hangs - even the hardkeys aren't responding anymore. after a soft reset it shows the "smart mobility screen" and does nothing anymore, only after a hardreset the phone boots again. this behavior startet with flashing the 6.5.x ROMs i think, before that i had no problems. i'm using radio 1.17.25.09 and xannytech ROM evo 1.4 right now.
i flash via hspl and yes, i did a hardreset after every flash
any idea what i can do to get back a working phone?
thank you!
hm... have you done the HR after flashing - I mean really after flashing including the base-program installation. Try to install new rom fully, then HR.
Otherwise it does not look like the rom problem. Maybe ur wifi is broken?...
Then - have you combined good XIP, RIL and Radio? I read here in the forum a good combination is needed or the phone could hang sometimes...
(Generally - I do not want to scare you however I think it is really a HW problem)
yes, i did the hardreset every time directly after flashing the ROMs.
hmm, i think i try another radio and flash again, when it behaves still wired you could be right an its a HW problem -.-
the wifi works well when i update weather or download quickgps data, so i don't think its broken. i had this behavior even when i wanted to change my background wallpaper in the last xnor ROM...
its really strange Oo
you can also try to flah a stock rom firts and then do the normal flahing procedure of the rom you want
sometimes it is possible that the prvious rom leaves traces arround on youre phone that doesnt like the new rom and therefor it could hang
so try to flash a strock rom first and then the rom you want maybe it helps
best regards
miniterror
MjØlnir said:
hi all!
i got a big problem with my touch hd...
after flashing several roms, i flash since miri V20, my phone startet to hang very often. everything is working fine after flashing, but when i want to use opera via wifi for example it hangs - even the hardkeys aren't responding anymore. after a soft reset it shows the "smart mobility screen" and does nothing anymore, only after a hardreset the phone boots again. this behavior startet with flashing the 6.5.x ROMs i think, before that i had no problems. i'm using radio 1.17.25.09 and xannytech ROM evo 1.4 right now.
i flash via hspl and yes, i did a hardreset after every flash
any idea what i can do to get back a working phone?
thank you!
Click to expand...
Click to collapse
It has been known that if you constantly flash your HD, sometimes this can cause HD to hang/freeze etc. A method which seems to fix this is to return to stock rom, then use dummies guide to flash cooked rom again
thank you all guys!
i will flash back to stock ROM as mentioned and then flash my fav custom ROM.
i let you know if the problem is solved then.
thx again!
Hi to all , could we know finally what you did so make your phone work again ?
yes, I'm interested too.
I had similar problems, no matter what rom i tried i had freezes and hang ups, and strange behavior, and after flashing stock rom and then another rom smooooth sailing all the way since so i reckon its a good thing to do every fifth flash or so.
hi all!
think i solved my problem by flashing the latest stock ROM as advised by other users. after that i flashed my prefered custom ROM and now the device flies Oo respond time is much much better, no lags or hangups till now...
i'm happy again
greetings
hello friends
i have a big probleme with my TYTN II , i installed ARABIC LANGUAGE SUPPORTS , but when i restared the machine , i found that :
1 - the phone blocked on black screen .
2 - the phone can not be detected by the computer .
* i used the reboot hard set , but the problem also the same ....
please how to resolve this probleme ?
Try doing a master reset on the phone it will clear any stuff that you done & will have to start over but it will get your phone back to it's original state when you flashed it with a different rom. You can do a master reset by holding down the 2 soft keyes & then use your styles to click on the reset. hope that helps.
hy friend ....i did that before ...but no result ....
Get into bootloader and flash new ROM. But have u do hard-spl before? If u don't do hard-spl before, u have to find exact ROM for ur device.
Moved as not software release.
Follow poster above directions and stock ROMs can be found in sticky. "to which as mentioned you need your carrier ROM"
I Installed a fresh windows on my diamond , and after that , everything went fine , the only problem is that , when i restart my device(suhtdown the startup again) it acts like a fresh windows install , you know , customazation , tapping the screen , etc , it delets all of the installed progs , and contacts ,just like a new install , and it keeps repeating every time i restart my phone , i need help , pls guys ... im desperete !!!
what ROM did you flash to? Flash another ROM this time using MTTY and doing a hard reset after its flashed the ROM.
i used about 5 diffrent roms , same problem ... dont know what to do ... and i can't find my old rom either , i had windows 6.1 and a manila 2.1 can't find it anymore
I suggest you flash the stock rom then run the unlocker again and then flash the custom rom. Good Luck!
i tought about flashing a stock one , but now , my phone won't even start , it just freezes on the start screen ( it shows the touchDiamond text , and the radio version , windows , etc ) , i tryed using mtty but it won't recognize my phone , and the drivers won't install either , i am using windows 7 ...
Code:
alexu2007 said:
i tought about flashing a stock one , but now , my phone won't even start , it just freezes on the start screen ( it shows the touchDiamond text , and the radio version , windows , etc ) , i tryed using mtty but it won't recognize my phone , and the drivers won't install either , i am using windows 7 ...
Click to expand...
Click to collapse
If you can get it to go into bootloader then you can flash. It should say serial toward the bottom. Then when you connect with your cable it should change to usb. Your ready to flash.
and with what program should i flash it ? i can get into bootloader , it says usb .. but what program should i use to flash s stock rom ?
alexu2007 said:
and with what program should i flash it ? i can get into bootloader , it says usb .. but what program should i use to flash s stock rom ?
Click to expand...
Click to collapse
You need to have your carrier's shipped .exe version for your device downloaded to your pc.
could you explain what should i have , i got my phone from a friend . u know second-hand , i didn't get any cd only a headset and a charger... if so where can i find that .exe ?
edit:i googled it and i found a stock rom .exe like u said , thanx a lot , hope it will work fine now ...thanx a lot again for helping me
alexu2007 said:
could you explain what should i have , i got my phone from a friend . u know second-hand , i didn't get any cd only a headset and a charger... if so where can i find that .exe ?
edit:i googled it and i found a stock rom .exe like u said , thanx a lot , hope it will work fine now ...thanx a lot again for helping me
Click to expand...
Click to collapse
You're Welcome!
I figured you would find it.
Good Luck to you!
hi
it seems my touch diamond is broken!
the phone in wake up hangs and just show me the htc logo!
after hard reset the phone just show me "touch here to launch touch flo" and nothing else!
and when i tap there,nothing runs!
and after 2 or 3 minutes its show me the tourial video for how to use device and after many second the video paused and nothing works!
i dident hspl or flashing any rom on my phone so far and now i can do nothing to fix it!
active synce was not connect because the phone goes to video and dident let it!
i cant flash any rom even from internal memory because the device was not hspled!
can any one help me?
______
excuse me for my poor english
TUTORIAL Reply
So you are saying that after flashing a custom ROM, YouTube isn't working right?
- 2 Bunny
kainppc6700 said:
So you are saying that after flashing a custom ROM, YouTube isn't working right?
- 2 Bunny
Click to expand...
Click to collapse
?!!!
where is the youtube and costom rom in my past post?!?!!
i told i dont flash any custom rom and any hspl so far!
my device have a official rom!
it hangs on htc logo in first boot at first
and make me to do hard reset
after hard reset,
the device boots succecfully
but nothing works!
i have no touch flo and the text was shown that click here to launch touch flo
but when i tab there nothing was happend!
after 2 minuts the device show the tourial video for how to use by itself and pause after many seconds!
and i cant do any thing!
nothing works and i have to soft reset device again and every thing that i told do repeat over and over again!
and i dont know what can i do!
please help me if u know what should i do to fix it!
Take it to sprint or where ever you got it.. if you want to try and fix it yourself you will have to hspl and flash a new rom. You can probably find the original rom somewhere but I would try to upgrade it if you go to the trouble to unlock it. Perhaps www.ppcgeeks.com has more active users..
Sent from my PC36100 using XDA App
jessesse said:
Take it to sprint or where ever you got it.. if you want to try and fix it yourself you will have to hspl and flash a new rom. You can probably find the original rom somewhere but I would try to upgrade it if you go to the trouble to unlock it. Perhaps www.ppcgeeks.com has more active users..
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
thanks my friend
"THE DEVICE SHOW THE TOURIAL VIDEO FOR HOW TO USE" Reply
HDRAGON said:
?!!!
where is the youtube and costom rom in my past post?!?!!
i told i dont flash any custom rom and any hspl so far!
my device have a official rom!
it hangs on htc logo in first boot at first
and make me to do hard reset
after hard reset,
the device boots succecfully
but nothing works!
i have no touch flo and the text was shown that click here to launch touch flo
but when i tab there nothing was happend!
after 2 minuts the device show the tourial video for how to use by itself and pause after many seconds!
and i cant do any thing!
nothing works and i have to soft reset device again and every thing that i told do repeat over and over again!
and i dont know what can i do!
please help me if u know what should i do to fix it!
Click to expand...
Click to collapse
If you haven't flashed any custom ROMs or used any third party YouTube applications, why are you so concerned about "the device show the tourial video for how to use"?
- 2 Bunny
his best option is to flash a stock rom.
that should fix it.
if it doesn't fix it and he has warranty take it in.
if it does fix it than..and only than can he HSPL the phone for custom roms.
WAIT Reply
thesteve42 said:
his best option is to flash a stock rom.
that should fix it.
if it doesn't fix it and he has warranty take it in.
if it does fix it than..and only than can he HSPL the phone for custom roms.
Click to expand...
Click to collapse
We've gotta find out what the problem is first. Hold your horses there, steeve ☺.
- 2 Bunny
it sounds to me like he has a corrupted rom or failed memory addresses in the phone.
the freeze followed by a no boot tells me something failed (hardware or software).
hard reset allowed for reboot, but not properly, indicating data corruption.
if reflashing stock corrects it (software corruption) than all is well.
if not (ROM or RAM failure) than phone needs replacement.
the diamond and pro run very hot, and are prone to hardware failure, causing odd behavior.
STEEVE Reply
thesteve42 said:
it sounds to me like he has a corrupted rom or failed memory addresses in the phone.
the freeze followed by a no boot tells me something failed (hardware or software).
hard reset allowed for reboot, but not properly, indicating data corruption.
if reflashing stock corrects it (software corruption) than all is well.
if not (ROM or RAM failure) than phone needs replacement.
the diamond and pro run very hot, and are prone to hardware failure, causing odd behavior.
Click to expand...
Click to collapse
We've gotta find out what the problem is first. Hold your horses there, steeve ☺.
- 2 Bunny
I was just suggesting how to find out what the problem was.