[Q] Any idea of repairing burnt radio? - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

Hi
Today I tried to access gprs with 23140/Beta1 and Opera said me that connection failed. I tried again - result: Hang. After reset device says that Phone is off. No way to turn it on, commanager don't open, accessing with Settings/Personal/Phone and selecting Yes to activate don't give any result. Phone continues to be off. After a hour of playing with battery-removal, sim cleaning etc I turned the device on and it said that phone is off as before. But I noticed that after trying to enable it with phone control panel, this status doesn't change but green led starts to blink. I asked my girl to phone me and - what the hell - I really got that call. After answering I could talk normal, but phone stays 'off'. I tried to phone too, and it successed. After that, phone hung and after reset, no call could be done. Totally nothing. I tried to hard reset, after that I got the signal, but I was not be able to make a call, connect to gprs, send an sms, like with turned off phone.
My radio is 1.08 and my rom is 23140.
Any ideas? I don't have any...

aeroflyluby said:
Hi
Today I tried to access gprs with 23140/Beta1 and Opera said me that connection failed. I tried again - result: Hang. After reset device says that Phone is off. No way to turn it on, commanager don't open, accessing with Settings/Personal/Phone and selecting Yes to activate don't give any result. Phone continues to be off. After a hour of playing with battery-removal, sim cleaning etc I turned the device on and it said that phone is off as before. But I noticed that after trying to enable it with phone control panel, this status doesn't change but green led starts to blink. I asked my girl to phone me and - what the hell - I really got that call. After answering I could talk normal, but phone stays 'off'. I tried to phone too, and it successed. After that, phone hung and after reset, no call could be done. Totally nothing. I tried to hard reset, after that I got the signal, but I was not be able to make a call, connect to gprs, send an sms, like with turned off phone.
My radio is 1.08 and my rom is 23140.
Any ideas? I don't have any...
Click to expand...
Click to collapse
can you try with 1.17 radio?
because for me the 1.17 radio version was the stable for himalaya and other chef using it too.
thanks and regards

reefsucks said:
can you try with 1.17 radio?
because for me the 1.17 radio version was the stable for himalaya and other chef using it too.
thanks and regards
Click to expand...
Click to collapse
Yes I tried it and sometimes it works okay, but sometimes it works like I described above.

Related

- my tilt froze after installing blackberry -

im just wondering if you guys experience their tilt freezing after installing the blackberry connect through the oem programs/setting.
everything went fine on/before installing the device. it prompt me that once its done installing, clicking ok would restart the phone. the phone restarted all through the windows screen saver screen. it would not move for a long time. it stays on the screen.
at this point i was piss because i couldnt make a phone call or anything. luckily i got a phone call but i cannot pick up the call at all. it rang but thats it. i tried restarting the phone by soft reset or taking the batt off. it still didnt work.
any input would be helpful.
thanks.
Had the same issue. Had to do a Hard reset and start over.
Left BB connect off for now.
I only saw that happen when I installed it on my storage card instead of the actual device.
i installed it in my storage device.
notrhj: how can i hard reset the phone? i tried other things.. is it possible to walk me through this.
i cant access anything on my desktop. its freezes especially after someone calls.. grrr no text.. nothing.
i fix the problem..
thanks.

[help] Diamond only powers on sometimes!

Hello guys!
I'm having some trouble with my HTC Touch Diamond. I am running the latest ROM, and the phone has worked perfectly since I've got it!
But one day it suddenly powered itself of during a phonecall and I was not able to power it on again. I removed the battery, put it in again, didn't work. Took out the battery and waited for almost 30 minutes, tried again and now it worked!
Since then the phone locks up in no systematical pattern (when I wake up in the morning it mybe locked itself, sometimes when I listen to the radio or typing an SMS..). Do you have any idea what the problem might be? Can't type in the serial number as I just have managed to turn it on.
What should be mentioned is the behavior when trying to start it. Either the phone gives no respons, or it "buzzez" and the display shows "touch diamond", but the rom version is not appearing down to the right. When it starts, it starts just as it should and no error messages is displayed.
I have not tried doing a hard reset yet, which I must say is considered the last option.
Have anyone experienced something like this? Or does anyone have a suggestion about what might be causing this?
Thanks on beforehand
Edit: have performed a hard reset now (did not format the 4gb). But the problem is not gone.. The phone just died while surfing. Now it locks at the green windows mobile-screen just before the homescreen loads (if it even boots at all...)
Please help anyone!

Problem With Making Calls After Device Has Been Locked

Hi All,
I've got a Diamond which is running Duttys V4 ROM with Radio v1.09.25.23.
Everytime i lock the phone (holding the hard {END} key), leave the phone for a length of time (say 1-2 hours - a shorter time will not produce this issue) and unlock the phone (bottom left {unlock} - middle right {confirm}) i am then unable to make outgoing calls. The phone still has signal and will recieve incoming calls / sms but upon trying to make an outgoing call or send a sms i recieve the message {your phone has no signal...yadda yadda yadda}.
Now, if i disable the Phone from comms manager and re-enable it, it will start to work and likewise, if i recieve an incoming call when the device is not working, it will work fine after the incoming call has ended. It just seems as if the phone isn't aware it's got a signal until it is made aware of this fact by an action, say incoming call.
Incoming SMS's although they come through, don't make the phone return to a working state.
Obviously there is a easy work around for this which is - Don't lock the bloody device - i can leave it for days with the screen off but no MS Lock enabled and it will still work fine.
Would be nice to get it sorted if anyone has got any ideas or seen anything like this. Could this be as simple as a regkey??? I suppose my other worry is that it my be indicative of a larger hardware problem...etc
Oh i've also tried upgrading the Radio to v1.11.25.01 which i'm now using with slightly increased battery life and higher than normal signal strength but no joy with it resolving this issue.
Tried a hard-reset, numerous soft-resets and all to no avail...
Sorry for a lengthy problem post and thanks in advance guys,
Tom
are u using s2u2?
vishalkishnani said:
are u using s2u2?
Click to expand...
Click to collapse
Nope, not using s2u2, although i have tried this to get around the problem and it doesn't seem to re-create the issue when S2U2 is used.
Just to re-iterate, it only happens when the device is locked with the inbuilt windows lock and left for a while (1hr ish)
Any clues anyone?? Does WM6.1 do anything strange with the radio when the device enters lock mode - ie. does is put the radio into "sleep mode" which only looks for incoming signals and then not come out of it properly?
Is anyone else having an issue like this at all??
Any help would be much appreciated!
Cheers guys

HELP diamond keep restarting

I took battery out to change SIM card and now it won't start.
I get text "Touch Diamond" on the black screen and when it comes to Radio version etc. (red text i corner) it restarts!?!
I tried hard reset but it doesn't help.
Plz help I need my baby back!
Tnx
Try this
I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio hxxp://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.
or
forum.xda-developers.com/showthread.php?p=5514067#post5514067
I have the same problem. After a lockup when trying to get the internet sharing to work the phone just keeps rebooting.
I tried to flash a new radi version (from bootloader mode). Everything went OK, but the phone still won't start.
Whats next step? Hard reset?
i have the same problem - i believe it´s battery related
Try leaving your device off for a bit and pull the battery. Then re-insert the battery and plug your device into the ac adapter/charger and charge it for at least 30min. Then turn it back on and see if it continues. Like the previous poster said, you could have a bad battery. Otherwise, flash the shipped rom and then see if it still does it. Then flash back to your custom rom.

"No sound" problem on my TD2 Please Help!!

Dear buds,
I've bought a TD2 with WinMO 6.5 lately. I had lots of bugs and fixed them all but one...
After some time from bootup (after 1 or 2 hours) the sound of phone goes off without a reason. No sound from speaker, headset or volume control buttons. However everything goes well instead sound. Phone vibrates when get call, notifications and alarms vibrate without sound etc. My only solution to get back the sounds is soft reset. After soft reset everything gets fine...
I think this is a sound driver issue but... If someone to help or show the way on forum please help (because I couldn't find same issue on search)
Thanks in advance.
If there aren't any other programs causing this by adjusting your volume levels, It may be a driver issue and you'll probably have to hard reset.
This is a common issue when flashing a new ROM without hard resetting after.
Dear Bruce,
Thanks for solution suggestion.
I hard reset three times until I bought the phone but nothing changed. I'm using the official shipped ROM and I didn't flash any other ROMs.
Extra programs list:
Klaxon
SKTools Lite
Garmin Mobile XT (Because my Copilot runs only after first installing then crashes forever)
Sportypal
Google Translator
Could that happen because of wrong flashing at factory or service etc.? I mean, this phone is a Vodafone version.
In Turkey, Vodafone signal often goes off and usually my phone gets stuck when the signal is off. Could this be the reason for unloading driver?
The digits of my phone are here:
ROM version: 2.16.468.4 (67041) WWE
ROM Date: 11.12.09
Radio Version:4.49.25.17
The fact that it works for a short while after soft reset perplexes me.
You have verified your volume is on when the sound turns off? (Sorry I have to ask this)
Any other programs running at the time is stops?
GPS software can conflict with system volume and backlight, so maybe make sure Garmin is set to dynamic settings.
Other than that, I really have no suggestions as a hard reset has not helped.
Perhaps hard reset, test for a while and see if it fails w/o any programs. Then install one prog at a time until you find the cause.
There is a slight possiblity that it was a bad flash and the driver is corrupt, which would mean reflashing the stock ROM.
Sorry I couldn't be of more assistance.
Dear Bruce
Sorry for very late answer for your last post
It's sure the phone volume is on
I've been examining the phone for one week and tried some possibilities and still no way for the bug
First I hard reseted again, then didn't install any other programs. After 6 hours, the same issue occured.
I uninstalled CoPilot (which I didn't use after hard reset) then soft reset and wait, just only some hours later, the sounds went off again.
After several soft resets, I decided to play music and monitor if it happens. Then BINGO! The sound went off just after poor GSM signal. When the phone lost the signal, it temporarily locked itself. After 2 or 3 issue, the phone sounds went off.
I think, phone starts a search after signal loss, then it tries to execute rest after 10 or 30 seconds either the signal comes back or not. After some trials it cannot reload sound .dll and sounds lock forever. But after soft reset, everything gets fine again.
To be sure about signal loss, I took the phone in flight mode for one day and wait for the same bug and the second BINGO came Phone didn't show the same bug.
After all, I reflashed the official ROM of TD2 and tried the same things but nothing changed. It's sure that the bug is not due to the wrong flashing the ROM.
For now, I'm sure that the bug occurs because of poor GSM signal of Vodafone in my region. So the question comes
Is there anything (such as a registry tweak or vice versa) to make the phone not to lock itself while loosing the signal and searching? Or do I have a way to increase the signal sensitivity?
Thanks for the worthful answers.
Regards

Categories

Resources