Related
Hey guys,
While on my way to the super root patch ( forum.xda-developers.com/showthread.php?t=751934&highlight=stock ), I first am trying to install JH3. I got Odin3 v1.00, put the .tar in the PDA box, and clicked start. Here's the log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> Removed!!
It hasn't changed in about 10 minutes. Any thoughts?
Thanks!
Pull the battery, get back into download mode with the key combo and start again. Odin is finicky and sometimes takes more than one try.
Sent from my SAMSUNG-SGH-I897 using XDA App
thecoolestcow said:
Hey guys,
While on my way to the super root patch ( forum.xda-developers.com/showthread.php?t=751934&highlight=stock ), I first am trying to install JH3. I got Odin3 v1.00, put the .tar in the PDA box, and clicked start. Here's the log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> Removed!!
It hasn't changed in about 10 minutes. Any thoughts?
Thanks!
Click to expand...
Click to collapse
Well the log says "removed" so somehow your USB connection got interrupted... which means your phone is going to be in Phone/Computer screen hell.
Close Odin, unplug your phone, pull out your battery/sim/sdcard.
Open Odin, put in your battery, attach USB, and hold both volume buttons without applying power to get back into download mode to try again
If that doesn't work:
Unplug the phone from everything, hold both buttons and power... keep holding power till the screen turns off, continue holding power- the screen will turn off a second time, at that point release power and continue holding the volume buttons and you *should* get the download screen
Thanks for the quick replies! Unfortunately, Odin doesn't seem to see that it's connected. I don't see anything in the ID:COM boxes. I changed USB ports, nothing. Should I uninstall and reinstall the drivers?
thecoolestcow said:
Thanks for the quick replies! Unfortunately, Odin doesn't seem to see that it's connected. I don't see anything in the ID:COM boxes. I changed USB ports, nothing. Should I uninstall and reinstall the drivers?
Click to expand...
Click to collapse
Odin won't see it unless the phone is powered up in download mode, if you've gotten it to download mode and Odin still can't see it then yeah... your drivers might be fubar
Odin tends to work best for me if I get everything set up in Odin just short of pressing the start button before connecting the phone to the computer and putting it in download mode. Maybe it's superstition, but it seems to help me avoid some of those timeout issues.
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm curious..what happens when you remove and replace battery, hold power up and hit power...wall o text?
Got it! Everything installed, super root added. Thanks for all your help!
Ok I apologize if this isnt where this belongs, but i have yet to find an answer i understand. Is odin a program that i can download to a desk top computer and run? I keep seeing open odin and do this , open odin and plug in phone. its always sounds like an easy step, but for someone who doesnt know how to even get odin, it has prevented me from doing alot of things with my phone. I see "needs odin' an i move on to the next thread I know its a firmware to help flash roms, but that is about it please educate a supernoob lol
I understand what you mean, I just got my captivate yesterday and spent a six+ hours figuring that stuff out. I think I might try to write up the steps I went throigh to help other Android noobs like me. I'm coming from an iphone so this is all new for me. The good news: I figured it all out finally and so can you. I now have JH3 installed, and the super root mod, overclocked and evertything. My quadrant score went from stock of around 900 something to 2160 after all the tweaks I applied. I cant wait to see how it performs with 2.2!
Ok, so basically heres what i figured out; to use Odin, you'll need a firmware image, and Odin will be included. I recommend upgrading to JH3 and installing SuperRoot. It makes everything pretty painless. SuperRoot installs lagfix, root, and much much more all at once.
Search for the SuperRoot thread (IIRC). In there is a link to instructions on how to restore your phone to stock. Look for the thread on JH3 and get that image. Post 6 in that thread has instructions, and the restore to stock thread has more of an explanation. Then, you can do whatever else you need. HTH.
Ill get on my pc in a minute a put the links in here.
Sent from my SAMSUNG-SGH-I897 using XDA App
Ok, I was wrong about the title: it's SuperRooterExtreme. I apologize for not being able to post links for you.
Code:
forum.xda-developers.com/showthread.php?t=751934
Follow the instructions on the next two links to flash to JH3. The fist link is for JH2, but the directions still work. Just download the JH3 firmware.
Code:
forum.xda-developers.com/showthread.php?t=751518
Code:
forum.xda-developers.com/showthread.php?t=731989
This page has all the files you need:
Code:
samsung-firmwares.com/i897.htm
You need the firmware file, the PIT file, and Odin. The links for all of that is on the above page. The PIT file and Odin are under the section called "Flash Tools."
Once you've restored, you can follow the instructions for the first link I gave (SuperRooterExtreme). Or, you can do whatever else you want. This is just what I figured out yesterday.
I know what it's like to not know what Odin is! Took me forever to figure it out, I downloaded all kinds of stupid crap before I got it right.
The odin I downloaded from the samsung firmware website is only 167kb and an unknown file that won't open what's that about
Sent from my SAMSUNG-SGH-I897 using XDA App
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Yeh happened a few times. Are you using the right pit file? Also set odin to win xp compatibility mode with admin access. Unplug all usb except mouse and kb and try again
Worst case find yaself a xp box and do it there.
Sent from my GT-I9000 using Tapatalk
d.fx said:
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Click to expand...
Click to collapse
Did you follow exactly the instruction given? You may read the link below
http://forum.xda-developers.com/showpost.php?p=7940762&postcount=1
It did happen to me once , i was on windows 7 , i installed xp on my macbook and since then all my flash went great.
Sent from my GT-I9000 using XDA App
d.fx said:
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Click to expand...
Click to collapse
Yeah I know..I'm bringing a thread back from the dead. But I'm desperate right now.
I'm having the same issue. So I rooted my phone awhile ago and was using the Paragon RC4 ROM, I upgraded it to RC6 and everything worked fine, but I decided to start from a clean slate and use ODIN3 to go back to stock and start from scratch (with a full battery cause when I first flashed I was apparently only at 98% battery). So I started ODIN3 and put the phone into download mode. ODIN picked the phone up right away and I hit Start. ODIN's status says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
And it sits at 'Get PIT for mapping..'.
There's a small blue status bar on the phone and it just sits at about 1/4".
I did a bad thing and yanked the battery and now the phone will only go into Download mode and ODIN still just sits at 'Get PIT for mapping..'. I can't get into recovery mode, can't even get a splash screen. I can't post in the [STOCK ROM\ Odin3 thread cause I'm a new member. So I'm stuck...anyone know what I can do to fix this?
Where is the pit file you are using .
jje
I have the same problem. Phone get's stuck at that point. I don't know what to do. I am using win 7 64 bit. Does anyone have an idea.
razyell said:
I have the same problem. Phone get's stuck at that point. I don't know what to do. I am using win 7 64 bit. Does anyone have an idea.
Click to expand...
Click to collapse
Put pit file on the desktop in a folder with the zipped files makes location easy .
Are you using the correct pit file are you loading it in PIT
jje
done.
JJEgan said:
Put pit file on the desktop in a folder with the zipped files makes location easy .
Are you using the correct pit file are you loading it in PIT
jje
Click to expand...
Click to collapse
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
razyell said:
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
Click to expand...
Click to collapse
My i9003 gets stuck there. i tried to emulate but i get an error regarding the PDA. can u please let us know how u did it???
razyell said:
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
Click to expand...
Click to collapse
this is the error i get in the virtual pc in xp mode
i solved it by plugging the cord into another port and letting windows rediscover the phone
screwyluie said:
i solved it by plugging the cord into another port and letting windows rediscover the phone
Click to expand...
Click to collapse
Plus One to this solution. Thought I killed my phone.
screwyluie said:
i solved it by plugging the cord into another port and letting windows rediscover the phone
Click to expand...
Click to collapse
+1
soft brick
i got the same problem.
cant get it right. im on winxp 32 got the pit file from this thread and stock rom MDC from Sammobile site.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Removed!!
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Added!!
I don't know what happened, I switched from pc to laptop and tried the same thing with pit file, same error, but my phone is working now. No changes in the phone it's still in MDL and I have superuser app but it says binary not found. Can't install binary also...
Sent from my SPH-L710 using Tapatalk 2
SOLVED
http://forum.xda-developers.com/showthread.php?t=2298876
[solved] pit file not found error
Sent from my SPH-L710 using Tapatalk 2
same problem :/
n30nix said:
Yeah I know..I'm bringing a thread back from the dead. But I'm desperate right now.
I'm having the same issue. So I rooted my phone awhile ago and was using the Paragon RC4 ROM, I upgraded it to RC6 and everything worked fine, but I decided to start from a clean slate and use ODIN3 to go back to stock and start from scratch (with a full battery cause when I first flashed I was apparently only at 98% battery). So I started ODIN3 and put the phone into download mode. ODIN picked the phone up right away and I hit Start. ODIN's status says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
And it sits at 'Get PIT for mapping..'.
There's a small blue status bar on the phone and it just sits at about 1/4".
I did a bad thing and yanked the battery and now the phone will only go into Download mode and ODIN still just sits at 'Get PIT for mapping..'. I can't get into recovery mode, can't even get a splash screen. I can't post in the [STOCK ROM\ Odin3 thread cause I'm a new member. So I'm stuck...anyone know what I can do to fix this?
Click to expand...
Click to collapse
same problem dud , i didnt find any solution so far ! :/
moody-mj said:
same problem dud , i didnt find any solution so far ! :/
Click to expand...
Click to collapse
Do you have a custom recovery or not?
Sent from my SPH-L720 using Tapatalk 4 Beta
thx for your fast replay...
pvinodnayak said:
Do you have a custom recovery or not?
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
first of all thanks for your fast reply
i've downloaded this firmware ( \N7100XXDLJ2 OXA FACTORY )
and tried it , didnt work
i work at samsung company in lebanon , and i have all the offical firmwares
i tried them , it wont work
in odin 3.04 it wont work , it quickly fails with out even starts ( re-partition operation failed )
and in odin 3.07 ( get pit for mapping ) and stucks on ( set partition )
i tried allot of different PIT files , and unticking ( re-partition ) nothing happend , and it only goes to download mode , or when i turned it on , it stucks on ( samsung galaxy note II ) plz help me
Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
happy20b said:
Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
Click to expand...
Click to collapse
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
prbassplayer said:
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
Click to expand...
Click to collapse
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
happy20b said:
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
Click to expand...
Click to collapse
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
prbassplayer said:
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
Click to expand...
Click to collapse
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
happy20b said:
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the reply.. But i am not aware of 1 click Kh4 no bl method.. even googling din help me.. Could u please point me to the link?
Thanks..
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
OMG how I miss that....
prbassplayer said:
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I was able to unbrick the cell using onc click unbrick method.. Now i can go to download mode by pressing volume up + down and connecting microusb cable..
If i Boot normally then it will show AT&T screen and will get stuck over ther
If i try to boot to recovery ( I had flashed clockworkmod recovery) then It will display AT&Screen for few seconds and goes off and again comes and goes of.. and this continues...
I am not able to use odin to download any image.. I dont know how to proceed now..
Is it possible to flash clockwordmod recovery from download mode ?
Thanks
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
happy20b said:
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
Click to expand...
Click to collapse
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
prbassplayer said:
OMG how I miss that....
Click to expand...
Click to collapse
prbassplayer said:
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
happy20b said:
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
Click to expand...
Click to collapse
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
happy20b said:
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
Click to expand...
Click to collapse
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
happy20b said:
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
Click to expand...
Click to collapse
You probably just flashed froyo boots, so the GB ones would be necessary for GB.
And yes, stock froyo doesn't allow unknown sources.
Swyped from my ICS Samsung Captivate
so im at the end of my tether, i have run out of ideas/cant be arsed anymore and just want my phone back! i believe there are some signs of life in my phone still e.g still can get into recovery mode still and therefore still have some hope! my previous attempts can be seen here - http://forum.xda-developers.com/search.php?searchid=86653826
any help would be immensely appreciated and a reward if it can be fixed!
thanks - sonny
cw00 said:
so im at the end of my tether, i have run out of ideas/cant be arsed anymore and just want my phone back! i believe there are some signs of life in my phone still e.g still can get into recovery mode still and therefore still have some hope! my previous attempts can be seen here - http://forum.xda-developers.com/search.php?searchid=86653826
any help would be immensely appreciated and a reward if it can be fixed!
thanks - sonny
Click to expand...
Click to collapse
Ok, the link provided it does not exist. But if you still can boot in download mode try flashing a stock gingerbread firmware from Dr. Ketan's thread thru Odin PC.
Sent from my GT-N7000 using xda app-developers app
I think thats been tried. So Sonny, u have GT-N7000 16GB Is that correct?
Sent from my GT-N7000 using xda app-developers app
glevitan said:
Ok, the link provided it does not exist. But if you still can boot in download mode try flashing a stock gingerbread firmware from Dr. Ketan's thread thru Odin PC.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
oops sorry, it was just a link to my previous posts in the help thread and a previous thread made in the wrong galaxy section
shoey63 said:
I think thats been tried. So Sonny, u have GT-N7000 16GB Is that correct?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
yep thats correct, all that happens when i turn it on is the yellow triangle and samsung logo appears.
Ok, lets get recovery back. (just got home from work. Need to have a shower and grab a beer be back shortly
Sent from my GT-N7000 using xda app-developers app
Ok press the vol down + power + home button all at one and keep holding it till u see the galaxy note logo
then u will see vol up to continue
download a gb rom from Dr ketans thread http://forum.xda-developers.com/showthread.php?t=1424997
use pc odin to flash it by selecting it in the pda tab.
after successfully flashing. Reboot Into recovery and do a wipe data factory reset. then reboot.
nokiamodeln91 said:
Ok press the vol down + power + home button all at one and keep holding it till u see the galaxy note logo
then u will see vol up to continue
download a gb rom from Dr ketans thread http://forum.xda-developers.com/showthread.php?t=1424997
use pc odin to flash it by selecting it in the pda tab.
after successfully flashing. Reboot Into recovery and do a wipe data factory reset. then reboot.
Click to expand...
Click to collapse
I don't think it's that simple. He was on wrong forums getting advice to flash this that and the other and flashing pre-rooted GB rom doesn't work anymore. Please bear with me while I try a different approach.....
---------- Post added at 07:27 PM ---------- Previous post was at 06:58 PM ----------
@ Sonny are u able to put files on your ext SD card via another device? (eg Camera, printer, old phone)
Also, in download mode does it say "CUSTOM BINARY DOWNLOAD: NO" and "CURRENT BINARY: SAMSUNG OFFICIAL"
shoey63 said:
I don't think it's that simple. He was on wrong forums getting advice to flash this that and the other and flashing pre-rooted GB rom doesn't work anymore. Please bear with me while I try a different approach.....
---------- Post added at 07:27 PM ---------- Previous post was at 06:58 PM ----------
@ Sonny are u able to put files on your ext SD card via another device? (eg Camera, printer, old phone)
Also, in download mode does it say "CUSTOM BINARY DOWNLOAD: NO" and "CURRENT BINARY: SAMSUNG OFFICIAL"
Click to expand...
Click to collapse
it says:
"CUSTOM BINARY DOWNLOAD: YES (2 COUNTS)" and "CURRENT BINARY: CUSTOM" hope this helps.
yes i can use my SD card on my current temporary phone, what have you got in mind?
thanks for the replies so far
cw00 said:
it says:
"CUSTOM BINARY DOWNLOAD: YES (2 COUNTS)" and "CURRENT BINARY: CUSTOM" hope this helps.
yes i can use my SD card on my current temporary phone, what have you got in mind?
thanks for the replies so far
Click to expand...
Click to collapse
OK this means means Samsung will know you have messed with your phone and probably won't honor warranty (If you have one).
Now it's PC Odin time again and another raised flash count. Download This Pit file. Now connect to PC Odin in download mode put the file in PIT box. Repartition should automatically be ticked. Now flash it. It should take only seconds. Report back if successful..
shoey63 said:
OK this means means Samsung will know you have messed with your phone and probably won't honor warranty (If you have one).
Now it's PC Odin time again and another raised flash count. Download This Pit file. Now connect to PC Odin in download mode put the file in PIT box. Repartition should automatically be ticked. Now flash it. It should take only seconds. Report back if successful..
Click to expand...
Click to collapse
ok will give this a go now, thanks
ok it passed! here is what it says:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Removed!!
Ok let's assume success :fingers-crossed: Now close Odin and download A PC Odin flashable Philz kernel. Open Odin again and put it in PDA (don't tick "repartition"), and flash it. If successful, you should now be able to boot into recovery.
ok trying now, what do you mean by boot into recovery?
ok cool it passed, you are on a roll! there was a small blue loading bar on the phone this time as well
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-ZSLPN-OZS-2.7.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Removed!!
also, what do you mean by boot into recovery?
After flash is "passed" by PC Odin, Press Volume Up + power + menu buttons simultaneously and hold until a menu appears. describe what you see
shoey63 said:
After flash is "passed" by PC Odin, Press Volume Up + power + menu buttons simultaneously and hold until a menu appears. describe what you see
Click to expand...
Click to collapse
hmm thats weird, i could get into recovery mode before but not seems i cant.
cw00 said:
hmm thats weird, i could get into recovery mode before but not seems i cant.
Click to expand...
Click to collapse
You got success on flashing kernel right? Take battery out for 20 - 30 seconds, replace, and do Vol UP + menu + power again. Something must happen...
shoey63 said:
You got success on flashing kernel right? Take battery out for 20 - 30 seconds, replace, and do Vol UP + menu + power again. Something must happen...
Click to expand...
Click to collapse
yeh it passed, took the battery out, all that happens is it goes from samsung screen to black and and then reappears. can still get into download mode. you literally hold the three buttons down till it appears right?
The button on the left must be held at the TOP (up), plus menu plus power until a menu appears. Try again.. Samsung logo should flash twice before recovery is entered (dont let go till it does)
[Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode screen
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin. It created a big problem for me. I couldn't go in to download mode after this.
So finally I purchased USB jig to enable Download mode (last option to make mobile in download mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box showing some port no. Above output comes when i continue with installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
vishu_10d said:
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin s/w. It created a big problem for me. I couldnt go in to downlaod mode after this.
So finally I purchased USB jig to enabled Download mode (last option to make mobile in downlaod mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box with some port number. Above output is comes when i continue installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
Click to expand...
Click to collapse
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
BWolf56 said:
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
Click to expand...
Click to collapse
Thanks for the reply...
I tried with Odin one click downloader also... but it is failing... attaching the image...
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
I followed the steps written in the forum above. But that is not working my case. I tried the steps in different computer with diff OS installed. but still same problem.
Is there any way to get PHONE, PDA, CSC file separately for i897 ? I could install I9000 in my samsung captivate mobile which had these files. So just thought, if i can get these files for i897, probably it should work?
Any Idea where i can get these files?
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
Still my problem is same. I went through the link. but that is also not helping.
In my phone, I cant see download screen, even though if i use USB jig.
When I run Odin s/w, I can see in odin as port "Added" when Connect my mobile with computer using usb port.
Usually Odin show port added when u are in download mode. But here in my case, when i first USB jig and then connect to computer, download mode screen message and image doesnt come. it shows nothing(like no display). But I can see , Odin shows port Added. and I could update kernel, do partitions etc. But when I select Image file as PDA. and click start. It always fails.
Is it happening because i cant see download mode screen ?
1. What firmware I need to install and how which contains code for showing download screen ?
2. Or can anybody provide me all files i.e. PIT, Bootloader, PDA, Phone, CSC for odin so that i can select all files in respective fields under Odin software and start update?
Please help.
One more thing i have noticed.. here is the output of odin when i update my mobile with following files of I9000 model. while trying images for my captivate mobile, I found a zip file for model GT I9000 and package name was -GT_I9000_ZSJPK_ZSJPG_OZSJPG. It had three files as - 1. CSC_OZSJPG.tar.md5. 2. PDA_ZSJPK.tar.md5. 3. PHONE_ZSJPG.tar.md5.
I selected this files in corresponding PHONE, CSC, PDA fields in odin and it updates phone successfully with the following output -
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_ZSJPK.tar.md5 is valid.
<OSM> PHONE_ZSJPG.tar.md5 is valid.
<OSM> CSC_OZSJPG.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> param.lfs
<ID:0/017> zImage
<ID:0/017> factoryfs.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> modem.bin
<ID:0/017> cache.rfs
<ID:0/017> Removed!!
<ID:0/017> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Added!!
<ID:0/018> Removed!!
<ID:0/019> Added!!
But even though i can see my phone with I9000 model image installed. but most of the operations it doesnt work. might be becoz image is not fully compatible with Captivate model. so no use.
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
x0ne215 said:
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
Click to expand...
Click to collapse
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
vishu_10d said:
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
Click to expand...
Click to collapse
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
vishu_10d said:
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
Click to expand...
Click to collapse
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
BWolf56 said:
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
Click to expand...
Click to collapse
Hi,
when i usb jig and after that connect to system. I can see port Added in Odin software. which ideally happens when mobile is in downlaod mode.
but here for me display doesnt show anything on screen, screen remain blank. No android icon comes. but still I can see port added in odin and also can install files in the mobile. like pit, bootloader PDA files. etc.
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
vishu_10d said:
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
Click to expand...
Click to collapse
I believe 4-2ndtwin has the link to them in his sig.
BWolf56 said:
I believe 4-2ndtwin has the link to them in his sig.
Click to expand...
Click to collapse
So any suggestions ? what should I do now ?
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
Search for 4-2ndtwin.. Go into his profile, then sig link and find the separated files.
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
You need Jtag
Check my signature for more detail.
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks a lot for providing me these files. This is what I wanted. I will try as you suggested and will let you know the result.
Thanks