Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
happy20b said:
Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
Click to expand...
Click to collapse
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
prbassplayer said:
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
Click to expand...
Click to collapse
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
happy20b said:
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
Click to expand...
Click to collapse
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
prbassplayer said:
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
Click to expand...
Click to collapse
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
happy20b said:
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the reply.. But i am not aware of 1 click Kh4 no bl method.. even googling din help me.. Could u please point me to the link?
Thanks..
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
OMG how I miss that....
prbassplayer said:
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I was able to unbrick the cell using onc click unbrick method.. Now i can go to download mode by pressing volume up + down and connecting microusb cable..
If i Boot normally then it will show AT&T screen and will get stuck over ther
If i try to boot to recovery ( I had flashed clockworkmod recovery) then It will display AT&Screen for few seconds and goes off and again comes and goes of.. and this continues...
I am not able to use odin to download any image.. I dont know how to proceed now..
Is it possible to flash clockwordmod recovery from download mode ?
Thanks
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
happy20b said:
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
Click to expand...
Click to collapse
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
prbassplayer said:
OMG how I miss that....
Click to expand...
Click to collapse
prbassplayer said:
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
happy20b said:
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
Click to expand...
Click to collapse
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
happy20b said:
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
Click to expand...
Click to collapse
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
happy20b said:
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
Click to expand...
Click to collapse
You probably just flashed froyo boots, so the GB ones would be necessary for GB.
And yes, stock froyo doesn't allow unknown sources.
Swyped from my ICS Samsung Captivate
Related
i tried to update to 2.2 and use Cognitionv2.4
now i stucked in screen with computer and phone
what i doing worng?
you need to flash back to the stock and reflash again with odin
How i got black screen with computer and phone and '!' between
Something went wrong during the flash or install of Cognition
Sent from my SAMSUNG-SGH-I897 using XDA App
How to fix it?
Wwebmonster said:
How to fix it?
Click to expand...
Click to collapse
start by using the search button
and what to search witch keywords?
Wwebmonster said:
what i doing worng?
Click to expand...
Click to collapse
Posting in the development forum is what you are doing wrong.
There is a Cognition thread so why no post there instead please?
Please read this.
http://forum.xda-developers.com/showthread.php?t=819105
OMG, i don't have a combo keys but i flashed and stucked :O
Wwebmonster said:
OMG, i don't have a combo keys but i flashed and stucked :O
Click to expand...
Click to collapse
Then this thread might be the only solution if you don't have combo keys.
Need to go buy this, no way it will be today
This is a question... having nothing to do with development ... please read the rules...and then read the threads and other peoples posts FIRST.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thread moved to Q&A.
OK now i'm in download mode
odin one click says:
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
and stuck
Wwebmonster said:
OK now i'm in download mode
odin one click says:
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
and stuck
Click to expand...
Click to collapse
That's a good sign. You may have to try a couple times. Just make sure Odin is up and running before you connect the phone.
Good luck.
I download odin 3 full version what i need to put in the pit file PDA and PHONE and CSC
where i get this files?
Wwebmonster said:
I download odin 3 full version what i need to put in the pit file PDA and PHONE and CSC
where i get this files?
Click to expand...
Click to collapse
Just use the one click. You're already in over your head.
But it stuck
it
"
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
"
Over 20 minutes
Look in the Dev section and download Odin one click to stock.
Unplug phone from PC,
Launch Odin one click,
Put phone in download mode,
Plug phone into USB,
Wait till Odin see's it,
Click start.
It should finish, if you really are in download mode.
Sent from my SAMSUNG-SGH-I897 using XDA App
I was most recently running Andromeda 3 (Froyo 2.2) when I decided to upgrade to Gingerbread. I intended to go to Cognition 5 v2 (This tread: http://forum.xda-developers.com/showthread.php?t=1127578). Step one was to be on Gingerbread and because I was running Froyo, I followed the link (This thread: http://forum.xda-developers.com/showthread.php?t=1127249) to flash Gingerbread stock.
Using odin3 v1.81 and the zImage-root.tar file, I put my phone into download mode, installed rebooted and then added the kernelKF1.tar file. The Cappy rebooted and I was running a rooted stock 2.3.3. This is where the main problem lies. Step two for Cognition was to use Clockworkmod Recovery to flash the new kernel – usually extremely easy but this time I received an error (see below). I believe the error is because I was upgraded to Android System Recovery <3e>, which produced an error anytime I try flashing clockwork recovery mode or using the update.zip method.
The error is “E: failed to verify whole-file signature. E:signature verification failed. Installation aborted”.
I tried to use the “2e recovery” method (http://forum.xda-developers.com/showthread.php?t=804226) however, Odein3 v1.81 receives the error:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
At this point, I’d be happy just to be able to go back to a Froyo cooked ROM but cannot.
Current:
Firmware version: 2.3.3
Baseband version: I897UCKF1
Kernel version: 2.6.35.7-I897UCKF1-CL273832
Build number: GINGERBREAD.UCKF1
Step 2 ... use the Odin to flash the latest Cog Kernel (use the .tar kernel) then Step 3. Don't use the .zip kernel. Don't use Rom Manager.
And last, get a fire extinguisher, ... U should have posted this in Q & A. So u may get flamed.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
For2ndtwin said:
And last, get a fire extinguisher, ... U should have posted this in Q & A. So u may get flamed.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Oh ****. :/ I thought I was in Q&A. Entirely too many tabs open.
Odin is now stuck on:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
Maybe close Odin, unplug ur phone from computer, restart Odin, pull battery from phone, replace, put back in download and retry flashing .tar kernel.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Btw, since u have gone gingerbread and have the i897 bootloaders, don't go flashin the 3 button fix odin or you will be hard bricked. Didn't know if u knew this so i thought i'd mention it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
cliffgardner said:
Oh ****. :/ I thought I was in Q&A. Entirely too many tabs open.
Odin is now stuck on:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
Click to expand...
Click to collapse
I've encountered the same problem as you do too. It's due to "not sure why".
But, it's fixed by below:
Download, http://forum.xda-developers.com/showthread.php?t=1127249
It's Odin 1 Click to STOCK Gingerbread Captivate.
Turn ON the Odin 1st.
Make sure your phone haven't plug into the PC and make sure your phone is OFF.
After that, CLICK and HOLD the VOLUME UP + DOWN BUTTON. Then, plug in the USB that's connected to your PC.
Once you see the Odin recognize your phone, quickly click START! If you got too slow, you'll not able to flash. PLEASE BE FAST.
Odin One-Click back to stock
KF1 Stock One Click (in the cog thread)
Flash v2 Kernel using odin
Flash Cog 5 via CWM
For2ndtwin said:
Btw, since u have gone gingerbread and have the i897 bootloaders, don't go flashin the 3 button fix odin or you will be hard bricked. Didn't know if u knew this so i thought i'd mention it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I'm glad you did mention it. Luckily, I never had any issues with the button combinations.
nygfan760 said:
Odin One-Click back to stock
KF1 Stock One Click (in the cog thread)
Flash v2 Kernel using odin
Flash Cog 5 via CWM
Click to expand...
Click to collapse
Will I be able to flash using CWM after flashing v2 Kernel with Odin?
Update I see that it does give me clockworkmod recovery 4.4.
Update to the update
I'm up and running Cog 5.2 and loving it. I was having a ton of issues with Odin but in the end, I flashed Eclair stock, then Gingerbread stock, KF1, Kernel 2, then Cog through CWM (that was put on during the Kernel 2 update it seems).
Thanks for the help and sorry for posting in the Dev instead of Q&A.
Good deal. Glad u got it goin.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
cliffgardner said:
Will I be able to flash using CWM after flashing v2 Kernel with Odin?
Update I see that it does give me clockworkmod recovery 4.4.
Update to the update
I'm up and running Cog 5.2 and loving it. I was having a ton of issues with Odin but in the end, I flashed Eclair stock, then Gingerbread stock, KF1, Kernel 2, then Cog through CWM (that was put on during the Kernel 2 update it seems).
Thanks for the help and sorry for posting in the Dev instead of Q&A.
Click to expand...
Click to collapse
On a side note Avoid using 1 clicks with bootloaders. With I897 GB bootloaders there isnt need to downgrade back to eclair bootloaders. So look around there are a ton of 1 clicks and firmware packages with out the bootloaders. It only flashes for a split second but might as well reduce the risk even more ^^ best of luck with cog 5
cliffgardner said:
Will I be able to flash using CWM after flashing v2 Kernel with Odin?
Update I see that it does give me clockworkmod recovery 4.4.
Update to the update
I'm up and running Cog 5.2 and loving it. I was having a ton of issues with Odin but in the end, I flashed Eclair stock, then Gingerbread stock, KF1, Kernel 2, then Cog through CWM (that was put on during the Kernel 2 update it seems).
Thanks for the help and sorry for posting in the Dev instead of Q&A.
Click to expand...
Click to collapse
No problem. Hey, you might wanna check out the Sheer Brilliance theme, I had it on Cog 5, and I loved it.
nygfan760 said:
No problem. Hey, you might wanna check out the Sheer Brilliance theme, I had it on Cog 5, and I loved it.
Click to expand...
Click to collapse
+1 I only ran cog for a few days to compare battery life but that theme made it way more bareable coming from MIUI.
Sent from my i897 running MIUI 1.8.19 with TalonMTD kernel.
Hello,
I have flashed my Galaxy S many times with Odin. Today i tried to flash it to it's stock froyo rom but odin stuck right here:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
Any help??
Is your phone in download mode?
Yes it is.. I have followed all the steps I did the previous times but now nothing happens.
Pull battery and try again, i always put in the files in odin before connecting the phone.
Sent from my GT-I9000 using Tapatalk 2
Again, nothing happens!
Which ROM were you coming from, if it was a cm7/9 aosp etc etc ROM then you need to make sure you have picked a firmware that contains a pit file as the partition layouts are different
Sent from my GT-I9000 using xda premium
I'm coming from cm9 ROM... Can you tell me which ROM I have to use to go back to stock 2.2?
Just find a froyo ROM for your region with a pit, go to samfirmware.com for all you need, much easier than me typing it
Sent from my GT-I9000 using xda premium
Maybe this Link can help for your problem...
http://forum.xda-developers.com/showthread.php?p=21550479
via Tapatalk 2
Sorry for the stupid question, but how i know which of these ROMs have a pit file?
The infos say only about PDA and CSC..
Open them up and take a look
Sent from my GT-I9000 using xda premium
AnestisK. said:
Sorry for the stupid question, but how i know which of these ROMs have a pit file?
The infos say only about PDA and CSC..
Click to expand...
Click to collapse
Pit File is a standard file for odin, not for specally roms. you need a pit file only for flashing a stock Firmeware. Normaly when you download Odin, the Pit File is included.
via Tapatalk 2
Look, i have a link for you, the language is german, but look for the pictures. maybe this can help for your problem.
http://www.faq4mobiles.de/samsung-faq-und-anleitungen/87302-anleitung-firmware-flashen-mit-odin.html
via Tapatalk 2
The first problem solved and I flashed the ROM but now my phone goes to the Galaxy S boot screen and it reboot again and again... Any help??
Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany
roxy2906 said:
Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany
Click to expand...
Click to collapse
I need it too, pleeeeeese :fingers-crossed:
Use the file at the bottom of the page h t t p:/ / forum.xda-developers.com/showthread.php?t=1987976&page=2 . The param.tar file. I had the same problem and for me worked. Now my phone is "alive". Flash it with Odin 1.85 as PDA file.
zeek12 said:
Use the file at the bottom of the page h t t p:/ / forum.xda-developers.com/showthread.php?t=1987976&page=2 . The param.tar file. I had the same problem and for me worked. Now my phone is "alive". Flash it with Odin 1.85 as PDA file.
Click to expand...
Click to collapse
I had tried, but now I have the splash screen "Samsung SII i9100"!
Can I fix??
On my device, then, doesn't work Triangle away ("Magic header not found. Incompatible device?).
For you in the same?
http://forum.xda-developers.com/showthread.php?t=2034357
Here you go. PIT file for re-partition I8190 -> http://www.mediafire.com/?5tc1l0d3z6x2awk
Can you re upload it again? Media fire link isnt working....
Look at 1st post there's a link for Pit file, just seen it. Look where it says No Pit partition, there's link in there.
Sent from my GT-I8190 using xda premium
Pit File for s3 mini
roxy2906 said:
Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany
Click to expand...
Click to collapse
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
doesn't work on i8190N
Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
this pit file doesn't work with i8190N it say
SM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
my phone turns on but stuck at logo
Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
Tried this pit file to remove a i9100 splash screen on a standard I8190 but no luck.
Anybody have any ideas please?
Flash this via CWM/TWRP
Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
thanks my friend, I hope it's work.
opoel34 said:
thanks my friend, I hope it's work.
Click to expand...
Click to collapse
did it work??
Sent from my GT-I8190 using xda app-developers app
PIT GT-i8190L
Benzonat0r said:
Flash this via CWM/TWRP
Click to expand...
Click to collapse
andr0id_n00b said:
did it work??
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I need the pit file for my s3 mini GT-I8190L Help me plz
Is there any way to pull the pit from the phone?
woopdedoda said:
Is there any way to pull the pit from the phone?
Click to expand...
Click to collapse
Yes, a simple google can help you
AssToast said:
Yes, a simple google can help you
Click to expand...
Click to collapse
Yeah I looked really quickly but didn't see it, just tried again and found it. Thanks.
I spoke too soon...
@AssToast sorry jumped the gun, I found this but it can only edit and create new pit's. Can you post any links that you know of?
woopdedoda said:
@AssToast sorry jumped the gun, I found this but it can only edit and create new pit's. Can you post any links that you know of?
Click to expand...
Click to collapse
Install Heimdall, follow the instructions here
then read the 2nd post on how to do that http://forum.xda-developers.com/showthread.php?t=1957552
Hi all, I've searched the forum for similar problem like mine and none of them worked with me. I have flashed CM 10 to my captivate and everything was working good. But then i decide to restore a backup I made trough CWM and here happened the problem. It couldn't finish the restore process, it said MD5 check failed or something similar.
So when restore failed, i wiped all the data/factory reset and then wanted to flash the CM 10 again from the internal storage it says it can't mount sdcard.
I tried to flash a stock ROM using odin but odin can't recognize it. I only can go into recovery mode and download mode other else it keeps looping showing SAMSUNG logo only.
This is a screen shot of the messeage it show's in CWM.
the link below is for the screen shot added http at the beigning because i'm not allowed to post outside link since i'm a new member
s15.postimg.org/ct3ty5jq3/2013_05_11_12_28_34.jpg
I think your first plan of action would be to get Odin to recognize your phone. Do you have the right divers installed?
Sent from my SGH-I897 using xda premium
finally i got odin to recognize it and right now its flashing. i'm using odinOneClick I897UCJF6 and it shows this
Code:
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
is this normal, because this is my first time to use this !
Yea that's all normal. It said added so it sees it. Can u flash a kernel?
Sent from my SGH-I897 using xda premium
Wonderfull, Now it shows firmware upgrade fail ! Try using recovery mode ! . It seems there's a lot to learn about smartphones. Any help
Does Odin still see your phone when that screen is up? If so flash it again. U may want to get a stock image and flash back to that first if you can.
Sent from my SGH-I897 using xda premium
LiVe0UR0LiFe said:
Wonderfull, Now it shows firmware upgrade fail ! Try using recovery mode ! . It seems there's a lot to learn about smartphones. Any help
Click to expand...
Click to collapse
See this thread... http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium