Related
i tried to update to 2.2 and use Cognitionv2.4
now i stucked in screen with computer and phone
what i doing worng?
you need to flash back to the stock and reflash again with odin
How i got black screen with computer and phone and '!' between
Something went wrong during the flash or install of Cognition
Sent from my SAMSUNG-SGH-I897 using XDA App
How to fix it?
Wwebmonster said:
How to fix it?
Click to expand...
Click to collapse
start by using the search button
and what to search witch keywords?
Wwebmonster said:
what i doing worng?
Click to expand...
Click to collapse
Posting in the development forum is what you are doing wrong.
There is a Cognition thread so why no post there instead please?
Please read this.
http://forum.xda-developers.com/showthread.php?t=819105
OMG, i don't have a combo keys but i flashed and stucked :O
Wwebmonster said:
OMG, i don't have a combo keys but i flashed and stucked :O
Click to expand...
Click to collapse
Then this thread might be the only solution if you don't have combo keys.
Need to go buy this, no way it will be today
This is a question... having nothing to do with development ... please read the rules...and then read the threads and other peoples posts FIRST.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thread moved to Q&A.
OK now i'm in download mode
odin one click says:
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
and stuck
Wwebmonster said:
OK now i'm in download mode
odin one click says:
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
and stuck
Click to expand...
Click to collapse
That's a good sign. You may have to try a couple times. Just make sure Odin is up and running before you connect the phone.
Good luck.
I download odin 3 full version what i need to put in the pit file PDA and PHONE and CSC
where i get this files?
Wwebmonster said:
I download odin 3 full version what i need to put in the pit file PDA and PHONE and CSC
where i get this files?
Click to expand...
Click to collapse
Just use the one click. You're already in over your head.
But it stuck
it
"
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
"
Over 20 minutes
Look in the Dev section and download Odin one click to stock.
Unplug phone from PC,
Launch Odin one click,
Put phone in download mode,
Plug phone into USB,
Wait till Odin see's it,
Click start.
It should finish, if you really are in download mode.
Sent from my SAMSUNG-SGH-I897 using XDA App
Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
happy20b said:
Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
Click to expand...
Click to collapse
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
prbassplayer said:
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
Click to expand...
Click to collapse
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
happy20b said:
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
Click to expand...
Click to collapse
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
prbassplayer said:
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
Click to expand...
Click to collapse
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
happy20b said:
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the reply.. But i am not aware of 1 click Kh4 no bl method.. even googling din help me.. Could u please point me to the link?
Thanks..
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
OMG how I miss that....
prbassplayer said:
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I was able to unbrick the cell using onc click unbrick method.. Now i can go to download mode by pressing volume up + down and connecting microusb cable..
If i Boot normally then it will show AT&T screen and will get stuck over ther
If i try to boot to recovery ( I had flashed clockworkmod recovery) then It will display AT&Screen for few seconds and goes off and again comes and goes of.. and this continues...
I am not able to use odin to download any image.. I dont know how to proceed now..
Is it possible to flash clockwordmod recovery from download mode ?
Thanks
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
happy20b said:
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
Click to expand...
Click to collapse
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
prbassplayer said:
OMG how I miss that....
Click to expand...
Click to collapse
prbassplayer said:
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
happy20b said:
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
Click to expand...
Click to collapse
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
happy20b said:
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
Click to expand...
Click to collapse
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
happy20b said:
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
Click to expand...
Click to collapse
You probably just flashed froyo boots, so the GB ones would be necessary for GB.
And yes, stock froyo doesn't allow unknown sources.
Swyped from my ICS Samsung Captivate
Hello,
I have a friend with a Non-Rooted, totally stock Galaxy Ace s5830M that's stuck on a boot loop. He was playing a game and the screen started flashing and it rebooted. It is now stuck in a boot loop.
I've been able to get in to Stock Recovery and in to Download mode without issues.
We tried to flash Clockwork Mod Recovery. It apparently succeeds , but when we reboot it does not "stick". Flash CWM,reboot and it just shows the Stock recovery menu. I found this thread, regarding this issue.. But this phone is completely stock, bought on Amazon and shipped to Venezuela. I think it was running Gingerbread.
We then tried to flash to a Stock Firmware from my country from Sammobile.com with Odin.
Once a single file recovery ( a large file with a md5.tar extension) and it fails:
<ID:0/037> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830MWHLA1_S5830MUUBLA1_S5830MWHLA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/037> Odin v.3 engine (ID:37)..
<ID:0/037> File analysis..
<ID:0/037> SetupConnection..
<ID:0/037> Initialzation..
<ID:0/037> Get PIT for mapping..
<ID:0/037> Firmware update start..
<ID:0/037> sbl.bin
<ID:0/037> NAND Write Start!!
<ID:0/037> BcmCP.img
<ID:0/037>
<ID:0/037> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Then we tried another solution from another site, flashing a multiple file firmware (BOOT, PDA and PHONE). We get this result, apparently it is succesful:
<ID:0/037> Added!!
<ID:0/037> Odin v.3 engine (ID:37)..
<ID:0/037> File analysis..
<ID:0/037> SetupConnection..
<ID:0/037> Initialzation..
<ID:0/037> Set PIT file..
<ID:0/037> DO NOT TURN OFF TARGET!!
<ID:0/037> Get PIT for mapping..
<ID:0/037> Firmware update start..
<ID:0/037> BcmBoot.img
<ID:0/037> NAND Write Start!!
<ID:0/037> HEDGE_NVRAM8_RF_LE.bin
<ID:0/037> sysparm_dep.img
<ID:0/037> system.img
<ID:0/037> boot.img
<ID:0/037> param.lfs
<ID:0/037> sbl.bin
<ID:0/037> BcmCP.img
<ID:0/037> Transmission Complete..
<ID:0/037> Now Writing.. Please wait about 2 minutes
<ID:0/037> Receive Response form LOKE
<ID:0/037> RQT_CLOSE !!
<ID:0/037> RES OK !!
<ID:0/037> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/037> Removed!!
Click to expand...
Click to collapse
When we reboot the phone, we now get a boot screen that says the device is a S5830C instead of a S5830M. But it's still stuck on the Samsung logo at boot.
We really don't know what else to try. Any ideas? Is this phone bricked?
Thanks,
Rafael
Factory reset ur phone from recovery & wipe cache. Also, U need to place the individual firmware files at correct fields in odin (hope U did that) otherwise ur phone'll not be able to boot properly.
As far as I know there are four files (BOOT, PHONE, PDA, CSC) in full package & only one file (of extension:- tar.md5) in One Package firmware...
Sent Via XDA Premium
Galaxy_Rohit said:
Factory reset ur phone from recovery & wipe cache. Also, U need to place the individual firmware files at correct fields in odin (hope U did that) otherwise ur phone'll not be able to boot properly.
As far as I know there are four files (BOOT, PHONE, PDA, CSC) in full package & only one file (of extension:- tar.md5) in One Package firmware...
Sent Via XDA Premium
Click to expand...
Click to collapse
U managed to screw the phone ... It was as simple as as factory reset you were lucky! You could have hard bricked is ace ! Flash a proper rom to 5830 M and the enter STOCK RECOVERY! and do wipe data!
Sent from my GT-I9830 using xda premium
Yep, that's the first thing we did, we did a wipe data and wipe cache.
Here are the steps we took when flashing via Odin.
Settings we used:
Files we used to flash:
marcano said:
Yep, that's the first thing we did, we did a wipe data and wipe cache.
Here are the steps we took when flashing via Odin.
Settings we used:
Files we used to flash:
Click to expand...
Click to collapse
U used odin for 5830i ...
Sent from my GT-I9830 using xda premium
You need to do a hard reset after flashing the stock rom.
Enviado desde mi LG-P350 usando Tapatalk 2
SnowPluralism said:
U used odin for 5830i ...
Sent from my GT-I9830 using xda premium
Click to expand...
Click to collapse
The S5830i, S5830C, S5830M and S5839i are the same aka cooperve.
The only difference is the region, this version of Odin works with S5830M too!
Anyway, this rom you flashed is from Brazil, and works with your phone too. Try a wipe data/factory reset on recovery, this maybe works.
You should have a look at S5830i Development and S5830i General, there you will find more answers about your phone.
Stock ROM for SGA 5830M
marcano said:
Hello,
I have a friend with a Non-Rooted, totally stock Galaxy Ace s5830M that's stuck on a boot loop. He was playing a game and the screen started flashing and it rebooted. It is now stuck in a boot loop.
I've been able to get in to Stock Recovery and in to Download mode without issues.
We tried to flash Clockwork Mod Recovery. It apparently succeeds , but when we reboot it does not "stick". Flash CWM,reboot and it just shows the Stock recovery menu. I found this thread, regarding this issue.. But this phone is completely stock, bought on Amazon and shipped to Venezuela. I think it was running Gingerbread.
We then tried to flash to a Stock Firmware from my country from Sammobile.com with Odin.
Once a single file recovery ( a large file with a md5.tar extension) and it fails:
Then we tried another solution from another site, flashing a multiple file firmware (BOOT, PDA and PHONE). We get this result, apparently it is succesful:
When we reboot the phone, we now get a boot screen that says the device is a S5830C instead of a S5830M. But it's still stuck on the Samsung logo at boot.
We really don't know what else to try. Any ideas? Is this phone bricked?
Thanks,
Rafael
Click to expand...
Click to collapse
Hi Rafael. OK, I have made a detailed how to in Taringa that specifies the way to install a Stock ROM for SGA GT-S5830M. Just search in google "tutorial flashear samsung galaxy ace 5830m con odin - Taringa!" (without quotation marks) and enter the first result, it would redirect you to my post, check that the name of the creator is "jhonaff", if so, just download the files from there, and flash them via Odin 1.85 or 1.87. In the post there is a link to download the version 1.85, this version of Odin is the one that works perfectly with this device. Following that steps I gave life again to my SGA 5830M.
After you download, unzip the files in the S5830M.rar archive, you will get three .tar.md5 files; now put the files in the following order in Odin:
BOOTLOADER -> leave this section empty.
PDA -> select the PDA file.
PHONE -> select the MODEM file.
CSC -> select the CSC file.
Now click Start button and wait for the process to finish; at the end of the process the phone will reboot in recovery automatically and it will run a script, don't unplug it, and don't do anything yet. The phone will reboot once more and now it will pass the Samsung logo and will show you the Samsung bootanimation. Now you can unplug it and wait, the first boot may take 1 or 2 minutes and you will get your phone alive again.
PD: I can't give you a link to my post cause I'm new in this site and I don't have 2 posts here, so I can't post links in my replies.
PD2: My post in Taringa is in Spanish, I think it is understandable, but if not, use a traductor, after all you just want to download the correct files.
I hope this can help you. I speak spanish and has been years from the last time I spoke in English, so forgive me if something is wrote incorrectly.
Thank you jhonaff2
jhonaff2 said:
Hi Rafael. OK, I have made a detailed how to in Taringa that specifies the way to install a Stock ROM for SGA GT-S5830M. Just search in google "tutorial flashear samsung galaxy ace 5830m con odin - Taringa!" (without quotation marks) and enter the first result, it would redirect you to my post, check that the name of the creator is "jhonaff", if so, just download the files from there, and flash them via Odin 1.85 or 1.87. In the post there is a link to download the version 1.85, this version of Odin is the one that works perfectly with this device. Following that steps I gave life again to my SGA 5830M.
After you download, unzip the files in the S5830M.rar archive, you will get three .tar.md5 files; now put the files in the following order in Odin:
BOOTLOADER -> leave this section empty.
PDA -> select the PDA file.
PHONE -> select the MODEM file.
CSC -> select the CSC file.
Now click Start button and wait for the process to finish; at the end of the process the phone will reboot in recovery automatically and it will run a script, don't unplug it, and don't do anything yet. The phone will reboot once more and now it will pass the Samsung logo and will show you the Samsung bootanimation. Now you can unplug it and wait, the first boot may take 1 or 2 minutes and you will get your phone alive again.
PD: I can't give you a link to my post cause I'm new in this site and I don't have 2 posts here, so I can't post links in my replies.
PD2: My post in Taringa is in Spanish, I think it is understandable, but if not, use a traductor, after all you just want to download the correct files.
I hope this can help you. I speak spanish and has been years from the last time I spoke in English, so forgive me if something is wrote incorrectly.
Click to expand...
Click to collapse
Thank you very much jhonaff2, you solved my problem after some days
I know it is not related to this post, but do you know how can I enable my 3G radio in US T-Mobile? I can only get their 2G services
geniusbabak said:
Thank you very much jhonaff2, you solved my problem after some days
I know it is not related to this post, but do you know how can I enable my 3G radio in US T-Mobile? I can only get their 2G services
Click to expand...
Click to collapse
we have same problem in 3g. i can only get 2g services
[Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode screen
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin. It created a big problem for me. I couldn't go in to download mode after this.
So finally I purchased USB jig to enable Download mode (last option to make mobile in download mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box showing some port no. Above output comes when i continue with installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
vishu_10d said:
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin s/w. It created a big problem for me. I couldnt go in to downlaod mode after this.
So finally I purchased USB jig to enabled Download mode (last option to make mobile in downlaod mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box with some port number. Above output is comes when i continue installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
Click to expand...
Click to collapse
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
BWolf56 said:
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
Click to expand...
Click to collapse
Thanks for the reply...
I tried with Odin one click downloader also... but it is failing... attaching the image...
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
I followed the steps written in the forum above. But that is not working my case. I tried the steps in different computer with diff OS installed. but still same problem.
Is there any way to get PHONE, PDA, CSC file separately for i897 ? I could install I9000 in my samsung captivate mobile which had these files. So just thought, if i can get these files for i897, probably it should work?
Any Idea where i can get these files?
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
Still my problem is same. I went through the link. but that is also not helping.
In my phone, I cant see download screen, even though if i use USB jig.
When I run Odin s/w, I can see in odin as port "Added" when Connect my mobile with computer using usb port.
Usually Odin show port added when u are in download mode. But here in my case, when i first USB jig and then connect to computer, download mode screen message and image doesnt come. it shows nothing(like no display). But I can see , Odin shows port Added. and I could update kernel, do partitions etc. But when I select Image file as PDA. and click start. It always fails.
Is it happening because i cant see download mode screen ?
1. What firmware I need to install and how which contains code for showing download screen ?
2. Or can anybody provide me all files i.e. PIT, Bootloader, PDA, Phone, CSC for odin so that i can select all files in respective fields under Odin software and start update?
Please help.
One more thing i have noticed.. here is the output of odin when i update my mobile with following files of I9000 model. while trying images for my captivate mobile, I found a zip file for model GT I9000 and package name was -GT_I9000_ZSJPK_ZSJPG_OZSJPG. It had three files as - 1. CSC_OZSJPG.tar.md5. 2. PDA_ZSJPK.tar.md5. 3. PHONE_ZSJPG.tar.md5.
I selected this files in corresponding PHONE, CSC, PDA fields in odin and it updates phone successfully with the following output -
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_ZSJPK.tar.md5 is valid.
<OSM> PHONE_ZSJPG.tar.md5 is valid.
<OSM> CSC_OZSJPG.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> param.lfs
<ID:0/017> zImage
<ID:0/017> factoryfs.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> modem.bin
<ID:0/017> cache.rfs
<ID:0/017> Removed!!
<ID:0/017> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Added!!
<ID:0/018> Removed!!
<ID:0/019> Added!!
But even though i can see my phone with I9000 model image installed. but most of the operations it doesnt work. might be becoz image is not fully compatible with Captivate model. so no use.
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
x0ne215 said:
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
Click to expand...
Click to collapse
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
vishu_10d said:
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
Click to expand...
Click to collapse
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
vishu_10d said:
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
Click to expand...
Click to collapse
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
BWolf56 said:
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
Click to expand...
Click to collapse
Hi,
when i usb jig and after that connect to system. I can see port Added in Odin software. which ideally happens when mobile is in downlaod mode.
but here for me display doesnt show anything on screen, screen remain blank. No android icon comes. but still I can see port added in odin and also can install files in the mobile. like pit, bootloader PDA files. etc.
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
vishu_10d said:
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
Click to expand...
Click to collapse
I believe 4-2ndtwin has the link to them in his sig.
BWolf56 said:
I believe 4-2ndtwin has the link to them in his sig.
Click to expand...
Click to collapse
So any suggestions ? what should I do now ?
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
Search for 4-2ndtwin.. Go into his profile, then sig link and find the separated files.
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
You need Jtag
Check my signature for more detail.
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks a lot for providing me these files. This is what I wanted. I will try as you suggested and will let you know the result.
Thanks
Hello all, new member here.
Ok. First of all, I'm on stock ICS, rooted using framaroot http://forum.xda-developers.com/showthread.php?t=2130276
Installed busybox and installed the applet using smart install.
Now I want sell the phone and I want my phone go back to "completely new unit".
In busybox it has option to uninstall the applets.. Warning popup came out like WHOA! bla3x... I don't have gut to continue so cancelled it..
In framaroot it has unroot option - this worked for me to unroot
My question is:-
should I uninstall the busybox applet?
Do I have to flash ICS stock rom using odin?
Anyone have same problem like mine? What u did?
please help
Just flash a stock GB (safer for next user) rom, it will remove all trace of root and busybox.
Sent from my GT-N7000 using xda premium
are89 said:
Hello all, new member here.
Ok. First of all, I'm on stock ICS, rooted using framaroot http://forum.xda-developers.com/showthread.php?t=2130276
Installed busybox and installed the applet using smart install.
Now I want sell the phone and I want my phone go back to "completely new unit".
In busybox it has option to uninstall the applets.. Warning popup came out like WHOA! bla3x... I don't have gut to continue so cancelled it..
In framaroot it has unroot option - this worked for me to unroot
My question is:-
should I uninstall the busybox applet?
Do I have to flash ICS stock rom using odin?
Anyone have same problem like mine? What u did?
please help
Click to expand...
Click to collapse
you have two options, flash a stock rom as said previously, or you can unroot your current rom.
Do it by acessing the root app, going into the options page, and click "full unroot" option. It will clean up every trace of rooting
projeto56 said:
you have two options, flash a stock rom as said previously, or you can unroot your current rom.
Do it by acessing the root app, going into the options page, and click "full unroot" option. It will clean up every trace of rooting
Click to expand...
Click to collapse
Flashing a stock rom with odine is the best way to full stock.
Sent from my GT-N7000
devll said:
Flashing a stock rom with odine is the best way to full stock.
Sent from my GT-N7000
Click to expand...
Click to collapse
But it isn't the simplest nor the safest
Sent from my GT-N7000 using Tapatalk 4 Beta
projeto56 said:
But it isn't the simplest nor the safest
Sent from my GT-N7000 using Tapatalk 4 Beta
Click to expand...
Click to collapse
He's gotta flash a new rom anyway as he's giving the phone on so may as well just flash.
Sent from my GT-N7000 using xda premium
Thanks to all who replied..
So, after unroot, can I reinstall the firmware via kies too?
By far easiest way would be what is above said but using Mobile Odin with full wipes
It's always so much harder when you have to try (David Gray).
AndroidSlave said:
By far easiest way would be what is above said but using Mobile Odin with full wipes
It's always so much harder when you have to try (David Gray).
Click to expand...
Click to collapse
I connected to kies and there is firmware update popup shows that JB is available..
Since my phone is rooted ICS stock rom, can I upgrade to JB?? or I have to unroot first.
are89 said:
I connected to kies and there is firmware update popup shows that JB is available..
Since my phone is rooted ICS stock rom, can I upgrade to JB?? or I have to unroot first.
Click to expand...
Click to collapse
You can try but it likely won't work
AndroidSlave said:
You can try but it likely won't work
Click to expand...
Click to collapse
Well.. I think I shouldn't, I dont want any trouble.. Thanks though for your help. I use this thread coz I cant even reply at this http://forum.xda-developers.com/showthread.php?t=2130276
Because new member not allowed to..
are89 said:
Well.. I think I shouldn't, I dont want any trouble.. Thanks though for your help. I use this thread coz I cant even reply at this http://forum.xda-developers.com/showthread.php?t=2130276
Because new member not allowed to..
Click to expand...
Click to collapse
That's not compatible with this device.
You should use mobile odin pro and move on. Or PC Odin if u don't want to use mobile
You shouldn't have used framaroot on this device u should have used philz
Be careful read the brickbug thread
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta
AndroidSlave said:
That's not compatible with this device.
You should use mobile odin pro and move on. Or PC Odin if u don't want to use mobile
You shouldn't have used framaroot on this device u should have used philz
Be careful read the brickbug thread
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta
Click to expand...
Click to collapse
Ok. What if I unroot the phone and use odin to flash ICS stock rom back? is it bad?
if it success should I wipe cache or hard reset my phone before upgrade to JB?
are89 said:
Ok. What if I unroot the phone and use odin to flash ICS stock rom back? is it bad?
if it success should I wipe cache or hard reset my phone before upgrade to JB?
Click to expand...
Click to collapse
Just flash a stock GB ROM as earlier recommended with PC Odin
ICS has brick bug dangers
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta
AndroidSlave said:
Just flash a stock GB ROM as earlier recommended with PC Odin
ICS has brick bug dangers
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta
Click to expand...
Click to collapse
Ok. Thanks for ur advise. I will flash to gb as earlier.. Have to download it first would take a day.. I will update here soon..
Many thanks Androidslave..
AndroidSlave said:
Just flash a stock GB ROM as earlier recommended with PC Odin
ICS has brick bug dangers
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta
Click to expand...
Click to collapse
I tried twice to flash with GB N7000DXKK1_N7000OLBKJ6_XME download from http://forum.xda-developers.com/showthread.php?t=1424997
or I have downloaded wrong GB stock rom.. I'm from malaysia
I got this from odin pc:-
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKK1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.bin
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
my current version is
PDA N7000DXLR5
PHONE N7000DXLR1
CSC N7000OLBLR2
edit:
Is the usb debugging should be checked or unchecked??
edit
Tried usb checked and unchecked, still same error message in odin..
are89 said:
I tried twice to flash with GB N7000DXKK1_N7000OLBKJ6_XME download from http://forum.xda-developers.com/showthread.php?t=1424997
or I have downloaded wrong GB stock rom.. I'm from malaysia
I got this from odin pc:-
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKK1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.bin
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
my current version is
PDA N7000DXLR5
PHONE N7000DXLR1
CSC N7000OLBLR2
edit:
Is the usb debugging should be checked or unchecked??
edit
Tried usb checked and unchecked, still same error message in odin..
Click to expand...
Click to collapse
It doesn't matter if debugging is checked or not. The flashing procedure should be done in download mode, not on booted state.
Try to use another usb port on your PC.
Sent from my GT-N7000 using Tapatalk 4 Beta
projeto56 said:
It doesn't matter if debugging is checked or not. The flashing procedure should be done in download mode, not on booted state.
Try to use another usb port on your PC.
Sent from my GT-N7000 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I gonna put this action on hold coz I installed philz CWM, I will try to flash stock rom using mobile odin sooner.. I want to study first about mobile odin, rom manager etc to make me more understand.. Thanks for ur support.
Can do with SuperSU/Superuser full unroot option!
Sent from my Lenovo S820_ROW using xda app-developers app
Don't use ROM manager. Use mobile Odin. Seriously why are you making this so difficult.
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta