Database Develop

[Q] Brick after trying to install Gingerbread

Hi i am on a captivate i896. I tried to install I897UCKF1. Everything was fine till it had to reboot after installation then i couldn't do anything. I can't install stock rom, the phone reboots with att logo and it doesn't do anything. I think its the bootloader that is messed up and i don't know how to install the older ones or just to be able to get back to rogers 2.1 stock or ATT 2.1 stock. I am always stuck at this screen :
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I897UCKF1_CL273832_REV02_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I897UCKF1_CL1017518_REV02.tar.md5 is valid.
<OSM> SGH-I897-CSC-ATTKF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
When i try to install JF6 it stalls at File Analysis....
Please help.

try and get it into download mode. Its not bricked justyet.

accordztech said:
try and get it into download mode. Its not bricked justyet.
Click to expand...
Click to collapse
i tried to get in download mode and i can but i just can't get to install any stock roms i can't do anything. Do you know if i can install the booloaders or anything?

ramih2085 said:
i tried to get in download mode and i can but i just can't get to install any stock roms i can't do anything. Do you know if i can install the booloaders or anything?
Click to expand...
Click to collapse
Restart your computer and if running windows vista or 7 make sure you run Odin as an administrator and possibly even compatibility mode. I have had that problem before and a restart fixed it.
Sent from my GT-I9000 using XDA Premium App

tried it, still the same thing...

i read something about bootloaders are different for the gingerbread build than the normal eclair and froyo. I don't know if i have to do something different. I just wanna get back to stock 2.1 from there i can find my way out...

ramih2085 said:
i read something about bootloaders are different for the gingerbread build than the normal eclair and froyo. I don't know if i have to do something different. I just wanna get back to stock 2.1 from there i can find my way out...
Click to expand...
Click to collapse
Did you try the Odin 1 click for stock JF6 posted by Designgears in the development forum? It flashes both bootloaders that are need to get back to stock.

yes i did, and it stalls at file analysis....usually it works but now i don't know why!

ramih2085 said:
yes i did, and it stalls at file analysis....usually it works but now i don't know why!
Click to expand...
Click to collapse
Try a different usb port and/or cable.

jhernand1102 said:
Try a different usb port and/or cable.
Click to expand...
Click to collapse
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.

ramih2085 said:
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.
Click to expand...
Click to collapse
I has an issue like this once where it would get stuck during the flash and my screen would turn different colors. I got it to work by using the full odin where you can select the pda & pit files. Give it a try.

jhernand1102 said:
I has an issue like this once where it would get stuck during the flash and my screen would turn different colors. I got it to work by using the full odin where you can select the pda & pit files. Give it a try.
Click to expand...
Click to collapse
i did that too, nothing worked...

anyone has an idea of what to do?

ramih2085 said:
anyone has an idea of what to do?
Click to expand...
Click to collapse
Try using the Odin version provided in this thread:
http://forum.xda-developers.com/showthread.php?t=1127249
It should restore to stock 2.3.3 Gingerbread. Not sure if being a UCKF1 poses a problem in your device or location, but I suppose it's worth a shot. Note that the rest of the instructions is to root the device, you don't need to do all those other steps. Just download the Odin One-Click, and try it out. Regards.

ramih2085 said:
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.
Click to expand...
Click to collapse
I have the same problem . Please help ! Thankss.

ramih2085 said:
i did that too, nothing worked...
Click to expand...
Click to collapse
my AT&T Captivate is 2.2 stock with root,unlocked . I flash Stock+voodoo-froyo I897 UCKB1.tar. it said FAIL. try to go back 2.1 stock but it can't do anything.Please help! Thanks

ramih2085 said:
i did that too, nothing worked...
Click to expand...
Click to collapse
what is PIT files ? and how can I get it ? I want to try it .Thanks .

Mr. Janderson said:
Try using the Odin version provided in this thread:
http://forum.xda-developers.com/showthread.php?t=1127249
It should restore to stock 2.3.3 Gingerbread. Not sure if being a UCKF1 poses a problem in your device or location, but I suppose it's worth a shot. Note that the rest of the instructions is to root the device, you don't need to do all those other steps. Just download the Odin One-Click, and try it out. Regards.
Click to expand...
Click to collapse
i tried that and here is the log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
also for the pit file, it is usually included in the zip file with odin 3 click so if you download odin 1 click, u dont need that file.

captivate bricked
flashing power off charging logo when try to reboot . no down load mode cant do sh%t.help please

See the "Captivate Connection Issues and Download Mode Help" that is linked in my signature below.
If that does not help then...
Sounds like you are gonna need a JIG. See my signature link below for links to how to make one or where to buy one.
When you get back into download mode, you are gonna need to flash a Stock Firmware of your choice. There is a sticky thread in the Captivate Development Forum that you will need to see for those.

[Q] Galaxy note root queries

Hello,
Now I am sure this forum gets it's fair share people completely oblivious to rooting and such. The issue is I have bought a Galaxy note and have had it for 4 wonderful months so far. It's unlocked, i.e not bound to a network.
2 months in I tried rooting my phone, and well it was very clear and simple (through the youtube video, linking to here). A month later I also got Kies to finally work and updated my phone kernel, unfortunately I had no idea that with that the root disappears. I went to try and get my apps to work in the university which have their own proxy setting to access the net (which I have finally gotten used to), the apps however do not work and thus the need for me to root my phone.
The query (I apologize for the long winded post):
I currently have the kernel version
2.6.35.7-N7000XXLC1-CL1003701
Ok so I am aware that I will be looking for kernels portraying the LC1 version when rooting, however it seems that there is no easy way of rooting (as the youtube video I watched) for my current specific kernel.
I just would like someone if possible to guide me exactly with what to do, do I really need to root my phone or is there a way to get apps to go through proxy without rooting again?
Also, how would I root my phone this time? What files would I be loooking for and how simple >.> are they.
Thank you again for your time,
I would appreciate any help, but I beg of you please keep it as simple as possible xD

You have updated your note with Kies, so you lost Root. Kies/OTa update erases root.
Anyway, now you have option is to downgrade
You can find any older directly rootable ROM from here N Root as you did it earlier.
After rooting, dont use kies/OTA to update.
just use same thread (as shown above) to find latest ROM, N update using CWM OR Moble Odin Pro.

wheres cwm?
Hey doc. I followed all your instructions and all is well but i was just wondering how do i get cwm back? I have updated the kernal and the phone is still rooted but no cwn (mobile odin latest update states that they have removed the inject cwm) so i was wondering if theres anyway to get it back? Thanks in advance

Flash cf root kernel with pc odin
Sent from my GT-N7000 using xda premium

Re cwm
Ok so i have used pc odin before but how do i flash the cf kernal? I thought the lc1 update could not be rooted directly.

BillyGuitar said:
Ok so i have used pc odin before but how do i flash the cf kernal? I thought the lc1 update could not be rooted directly.
Click to expand...
Click to collapse
Flash a rootable rom say kk9 through PC Odin once done flash the cwm root for it (kk9) from chainfires post then flash that via Odin the same way as you would a rom

Re cwm
Awsome dude, took me 2 mins. Thank you very much

BillyGuitar said:
Awsome dude, took me 2 mins. Thank you very much
Click to expand...
Click to collapse
No problem mate glad it worked

So how long does the flashing take?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
Has been stuck on this 800 mb file for quite some time now, the Samsung galaxy note has the Android robot and Downloading "Do not turn off target" display atm. Just curious how long it often takes, getting kind of worried >.> Looking at ~1hour or so now

[Q] Please help me with my Note GT-N7000 (I might have bricked it)

My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.

you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium

immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.

khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!

No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.

Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4

khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.

Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.

khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app

khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.

Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.

khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.

Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.

khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918

Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.

khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone

Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.

khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone

Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.

Just two options above, warranty or repartition.
Sent from my phone

''firmware encountered an issue'' for galaxy note

Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE

orcunpakten said:
Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE
Click to expand...
Click to collapse
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium

happened to me too..
That "firmware encountered an issue" is an indication that the system is corrupted to the point that it cant manage to startup..
I got that problem because of my stupidity.. Plugged my phone to the defective USB port and when I started flashing, I accidentally moved the cable and BAM! Phone is disconnected, and flash failed bigtime..
Your only fix for that if you ask me is do another flash... Try pulling out the battery for 10mins and try to boot into download mode.. That's how i was able to recover my phone from that screen..
I remember that message offering to run emergency recovery using Kies but it is totally useless.. trust me..
Make sure you're plugging in your phone to the USB port DIRECTLY on the motherboard of the computer (the ports at the back) not the ports on the front panel of the case of your computer..
If you're still encountering problems, I believe youre looking at a bricked device and seek more advanced assitance from people here..

SpyderTracks said:
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
usually factory fail.
i did every time fullwipe

Sounds like superbrick, but try flashing stock gb with pc Odin.
Sent from my GT-N7000 using xda premium

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium

SpyderTracks said:
Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
But i can get download mode and if i install odin ''AbyssNotekernel42CWTouchOriginalLogo'' i get recovery mode...

just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..

nokiamodeln91 said:
just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..
Click to expand...
Click to collapse
i try another laptop now... Cuz i remember what i do.
My last rom is stock XXLRK rom. And i tired slowly
i try everything HARDRESET-UPDATA-ALLWIPE but always slowly. And i think maybe i need a GB rom.
and i download XXLA4 everything is good and when i try root XXLA4.
this file: 'CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5'' stock phone.
Every time i install this way.
Wipe Data/Factory Reset
Wipe Cache Partition
Format/cache
Format/system
Format/data
Wipe Dalvik Cache
Wipe Battery Stats
Fix Permissions
This way always be good for me cuz i try this way 100 times.
I use Odin 1.85 and i use everytime u1_02_20110310_emmc_EXT4.pit (NO-RE-PARTITION)
So i think my fault is mistakenly last time i select ''N7000_16GB_Q1_20110914-stock.pit'' instal a ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''

I'm tired for try.
I try another pc but result is the same. FAIL FAIL FAIL
N7000XXLA4_N7000OJVKL1_N7000XXLA4_HOME.tar
N7000XXLRL_N7000XXLRK_N7000VD2LR1_HOME.tar
N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar
N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar
N7000XXLRI_N7000OJVLR3_N7000XXLRB_HOME.tar
I'm like a sammy's storage... I try this roms but result is the same.
Where did i wrong? problem is kernel?rom?pit file? ((

where did it fail?

nokiamodeln91 said:
where did it fail?
Click to expand...
Click to collapse
Odin Fail. I think factoryfs.img fail...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why now is the wrong? Thing I did always right way

Done dude.. u r good to go now

Problem is solved
Thank you so much ''nokiamodeln91''

dont do any wipes as of now.. u on ICS and an unsafe kernel
dont forget the thanks button

How did you rectify this nokiamodeln91?
Sent from my GT-N7000 using xda premium

OP used an incorrect file with the PIT16GB file.. i just corrected the mistake

nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Nice man, well done.
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Where can I get a copy of this PIT file? My phone is bricked and am only able to get into download mode and not recovery mode.

[Q] questions about rooting, flashing, ...

I've been reading posts on this forum for about 2-3 hours now and I still have some questions.
I have a galaxy s advance with android version 2.3.6 and baseband version XXLK2
i48.tinypic.com/2rz78sm.png
I was planning on rooting my phone and then maybe installing a custom ROM on it.
But I couldn't find a rooted firmware for my region (BELGIUM). And I also couldn't find the stock firmware for my region.
Neither on sammobile.com and neither on samsung-updates.com
My first question is: can I use rooted firmware that's for another region or will this cause problems for me?
My second question is: can I use rooted firmware with another baseband version than XXLK2?
Third question: if the answer on the first two questions is no, how am i supposed to root my phone then?
fourth and for now the last question: what is twrp recovery, and what is it used for, do I need it to root my phone or flash roms?
Thanks in advance!

ahmett75 said:
I've been reading posts on this forum for about 2-3 hours now and I still have some questions.
I have a galaxy s advance with android version 2.3.6 and baseband version XXLK2
i48.tinypic.com/2rz78sm.png
I was planning on rooting my phone and then maybe installing a custom ROM on it.
But I couldn't find a rooted firmware for my region (BELGIUM). And I also couldn't find the stock firmware for my region.
Neither on sammobile.com and neither on samsung-updates.com
My first question is: can I use rooted firmware that's for another region or will this cause problems for me?
My second question is: can I use rooted firmware with another baseband version than XXLK2?
Third question: if the answer on the first two questions is no, how am i supposed to root my phone then?
fourth and for now the last question: what is twrp recovery, and what is it used for, do I need it to root my phone or flash roms?
Thanks in advance!
Click to expand...
Click to collapse
do you want to stay with gingerbread, or upgrade to jellybean?
because rooting and flashing is much tougher in gb than in JB! tell me that i can help you.

Hi,
I got the same phone / baseband version in Austria. Downloaded XXLK2 firmware from sammobile.com, used simg2img to extract system.img, add su binary (=rooted), made a new system.img with make_ext4fs and flashed with heimdall. Meanwhile I used the same procedure to root and flash the jelly bean firmware XXLPY released for the russian market. Therefore I guess you can also flash a different version of gingerbread.
tom

Brainiac.shri said:
do you want to stay with gingerbread, or upgrade to jellybean?
because rooting and flashing is much tougher in gb than in JB! tell me that i can help you.
Click to expand...
Click to collapse
First i want to root my phone and then i want to install custom roms.
Sent from my GT-I9070 using xda app-developers app

RealBorg said:
Hi,
I got the same phone / baseband version in Austria. Downloaded XXLK2 firmware from sammobile.com, used simg2img to extract system.img, add su binary (=rooted), made a new system.img with make_ext4fs and flashed with heimdall. Meanwhile I used the same procedure to root and flash the jelly bean firmware XXLPY released for the russian market. Therefore I guess you can also flash a different version of gingerbread.
tom
Click to expand...
Click to collapse
But i'm from belgium and i couldnt find one for belgium. So you live in austria and downloaded the firmware for austria?
Sent from my GT-I9070 using xda app-developers app

ahmett75 said:
First i want to root my phone and then i want to install custom roms.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
if u upgrade to JB, root is a one step, 5 min process after which it takes a few more minutes to start flashing roms after flashing a new kernel with Clockworkmod. if u wanna start with jellybean, go here.http://forum.xda-developers.com/showthread.php?t=2094318(make sure u install the stock samsung rom first , then root then install recovery, then flash a custom rom) this WILL NOT void ur warranty
on the other hand rooting gingerbread is incredibly complex. if u wanna do that go to this thread http://forum.xda-developers.com/showthread.php?t=1985199
its totally safe to flash anither country firmware using odin.then root the supported firmware. also this will void your warranty,
then to install a new kernel with TWRP recovery , go here : http://forum.xda-developers.com/showthread.php?t=1873119
then finally choose the custom rom u want Jetmod or supressed and flash using TWRP(assuming you know how to atleast nter download and recovery mode!)
do all this in the same order.

Brainiac.shri said:
if u upgrade to JB, root is a one step, 5 min process after which it takes a few more minutes to start flashing roms after flashing a new kernel with Clockworkmod. if u wanna start with jellybean, go here.http://forum.xda-developers.com/showthread.php?t=2094318(make sure u install the stock samsung rom first , then root then install recovery, then flash a custom rom) this WILL NOT void ur warranty
on the other hand rooting gingerbread is incredibly complex. if u wanna do that go to this thread http://forum.xda-developers.com/showthread.php?t=1985199
its totally safe to flash anither country firmware using odin.then root the supported firmware. also this will void your warranty,
then to install a new kernel with TWRP recovery , go here : http://forum.xda-developers.com/showthread.php?t=1873119
then finally choose the custom rom u want Jetmod or supressed and flash using TWRP(assuming you know how to atleast nter download and recovery mode!)
do all this in the same order.
Click to expand...
Click to collapse
So what i'm going to do is:
1. download JB and install it
2. Root
3. then install twrp recovery
4. Flash a kernel with clockworkmod (which kernel do you suggest?)
5. Flash custom roms
Is this the correct order or am i wrong?

ahmett75 said:
So what i'm going to do is:
1. download JB and install it
2. Root
3. then install twrp recovery
4. Flash a kernel with clockworkmod (which kernel do you suggest?)
5. Flash custom roms
Is this the correct order or am i wrong?
Click to expand...
Click to collapse
You can't install any recovery by itself. It comes with kernel. Only kernel with permanent recovery - CWM is ThunderZap now.
1. Download JB, flash it with Odin. - go again to recovery - do factory reset.
2. Root with root.zip from stock recovery
3. Install kernel with CWM (ThunderZap) with dd command in terminal editor
4. Flash custom ROM from CWM recovery.

shut_down said:
You can't install any recovery by itself. It comes with kernel. Only kernel with permanent recovery - CWM is ThunderZap now.
1. Download JB, flash it with Odin. - go again to recovery - do factory reset.
2. Root with root.zip from stock recovery
3. Install kernel with CWM (ThunderZap) with dd command in terminal editor
4. Flash custom ROM from CWM recovery.
Click to expand...
Click to collapse
i'm going to give it a try, waiting for the download to finish

UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Одг: [Q] questions about rooting, flashing, ...
ahmett75 said:
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
Added!!
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Not recovry, in download mode. Did you unpack file. It should be around 700MB, not 400.
In recovery after flsshing, to do factory reset.
Sent from Galaxy S Advance

exchange exprsee
shut_down said:
Not recovry, in download mode. Did you unpack file. It should be around 700MB, not 400.
In recovery after flsshing, to do factory reset.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
ok, so now i've runned odin as admin, loaded the firmware and i get this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
then i go into download mode and connect my phone and i get this.
<ID:0/003> Added!!
i've read that something has to turn yellow, or isn't that necessary?
EDIT: i just pressed start and it is installing i think

Одг: [Q] questions about rooting, flashing, ...
ahmett75 said:
ok, so now i've runned odin as admin, loaded the firmware and i get this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
then i go into download mode and connect my phone and i get this.
<ID:0/003> Added!!
i've read that something has to turn yellow, or isn't that necessary?
EDIT: i just pressed start and it is installing i think
Click to expand...
Click to collapse
Search google "samsung download mode" and you should see image of it. When you power your phone with vol.down+home+power you get question do you want to continue. You press volume up to confirm. And after that with your phone connected and file in PDA hit start.
Sent from Galaxy S Advance

ahmett75 said:
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I have a similar issue. In Odin/Download mode I tried flashing Jelly Bean. Here is what I get from Odin:
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> power_management.bin.md5
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In red on the screen is "CUSTOM PWR MGT BINARY !!"
Did a factory reset. Same issue. Turned on Settings -> Applications -> Development -> USB Debugging + Allow mock locations. Same issue.
Any ideas?

JBAdvXDA said:
I have a similar issue. In Odin/Download mode I tried flashing Jelly Bean. Here is what I get from Odin:
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> power_management.bin.md5
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In red on the screen is "CUSTOM PWR MGT BINARY !!"
Did a factory reset. Same issue. Turned on Settings -> Applications -> Development -> USB Debugging + Allow mock locations. Same issue.
Any ideas?
Click to expand...
Click to collapse
How much time does this take? Maybe try to redownload firmware file.

shut_down said:
How much time does this take? Maybe try to redownload firmware file.
Click to expand...
Click to collapse
Maybe 10seconds.
I downloaded Odin3.07 (Was using Odin3v1.7). From: http://forum.xda-developers.com/showthread.php?t=2086965
It is still showing in red "CUSTOM *** BINARY !!!!" but is now progressing to other components.
Will report back.

JBAdvXDA said:
Maybe 10seconds.
I downloaded Odin3.07 (Was using Odin3v1.7). From: http://forum.xda-developers.com/showthread.php?t=2086965
It is still showing in red "CUSTOM *** BINARY !!!!" but is now progressing to other components.
Will report back.
Click to expand...
Click to collapse
It should last couple minutes. Something is wrong at start. I am not saying redownload Odin, whole firmware file. But you did unpack it from zip, it should be noticable that it is corrupted when you did that on pc.

shut_down said:
It should last couple minutes. Something is wrong at start. I am not saying redownload Odin, whole firmware file. But you did unpack it from zip, it should be noticable that it is corrupted when you did that on pc.
Click to expand...
Click to collapse
Thanks.
Used Odin3v3.07 to install JB and it boots! Now the baseband version is "Unknown" and I have no service.

JBAdvXDA said:
Thanks.
Used Odin3v3.07 to install JB and it boots! Now the baseband version is "Unknown" and I have no service.
Click to expand...
Click to collapse
Try wiping cache reset in stock recovery and problem solve

I've succesfully upgraded to JB, rooted and flashed kernel.
Any suggestions about ROMS for i9070 ?