Related
Hi, my first post..
so i read some and rooted my captivate, flashed it to Cognition 2.3b7 and since then my wifi stopped working...
I am guessing I can flash with another ROM ?
and don't have to go back to stock build??
if so which rom should I go with? I like the Gingerbread look and feel but open to try others...this phone is new and I don't have to worry about files/information yet.
thanks for your help
First, welcome to XDA, but...wrong section, this belongs in Q&A not development.
Mods please move.
You want to flash stock using odin
http://forum.xda-developers.com/showthread.php?t=731989
Don't try to flash another rom directly on top, you will compound the problem.
Have you tried reboot on your phone
If you are lost you can pm me
Sent from my SAMSUNG-SGH-I897 using XDA App
thanks mcord. so if I go back to stock do I have to root again?
also please let me know which rom to use to flash..I read Assonance 5.0 might be good?
thanks
greenzellybean said:
thanks mcord. so if I go back to stock do I have to root again?
also please let me know which rom to use to flash..I read Assonance 5.0 might be good?
thanks
Click to expand...
Click to collapse
You should have an update zip on your sd from rom manager/clockwork. Take this fille, and save it to your pc, our external sd. When you are on stock put it back on your internal sd, boot into recovery, reinstall packages twice, you will have clockwork recovery. Youcan flash roms from here without root.
I am not sure your problem was from cognition, maybe a bad flash. I am using assonance, so far so good but I have not been on it for long, axura is nice as well.
I would also suggest that you do a master clear after odin, make sure you are not keeping any troubled files. Make sure you backup anything you do not want erased to your oc or external sd
Remove sim and external sd before odin, master clear, or rom flash. Suggested not to flash roms with usb plugged in. always best to flash with full bat
Sent from my SAMSUNG-SGH-I897 using XDA App
Well, If you are going to flash trough CWM then no, you dont need to root again because you dont need to root to use CWM. Just make sure you keep the CWM update.zip on your sdcard boot into recovery and choose reinstall packages and you will boot into CWM.
And about the ROM. Well, you could try Cognition2.3b6, Perception8 or Assonance. I heard Cog has better battery life than Perc but Perc is faster, also the main diference is that Perc is based on i9000 ROM and Cog is based on Captivate ROM. I really dont know anything about Assonance escept that people say it's good.
If you are looking for another ROM, consider Assonance: http://forum.xda-developers.com/showthread.php?t=856877
Full instructions are included in the original post.
Hi guys. First post so hope I don't look like an idiot!
Flashed Cognition v2.3b6 2 weeks ago but had to go back to stock 2.1 jh6 reason being while @ home I can connect to my protected wifi network with no problem but if I try to
use an open wifi network say at Denny's or an AT&T hotspot my wifi just loops and no hook up! {N/G} Have to switch back to 3G to get to on the net. After flash back to stock no wifi problems anywhere. Yesterday, 12/22/2010, flash to new Cognition v2.3b8. After flash went to Denny's and wifi N/G! Am I alone here or is anyone else having this problem? Flashed back to stock and today did Kies mini update to jh7, AOK! Went back to Denny's and had no problems connecting to wifi??????????????????
Here are my doubts: Captivate on 2.2 no root
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
5)Do I need to go back to stock every time I want to flash a different rom?
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
jmtheiss said:
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Click to expand...
Click to collapse
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
DudeWatsThat said:
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
Click to expand...
Click to collapse
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
jmtheiss said:
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
Click to expand...
Click to collapse
Thanks again
I don't plan on flashing 2.3 roms until the official 2.3 release come out
Theres a Odin that flashes stock 2.2 instead of 2.1 can I use that one instead?
Theres a Odin that flashes stock 2.2 instead of 2.1
Click to expand...
Click to collapse
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
jmtheiss said:
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
Click to expand...
Click to collapse
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
DudeWatsThat said:
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
Click to expand...
Click to collapse
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
jmtheiss said:
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
Click to expand...
Click to collapse
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
DudeWatsThat said:
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
Click to expand...
Click to collapse
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
jmtheiss said:
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
Click to expand...
Click to collapse
Eh i got it into download mode and i pressed start on odin but i think its stuck did i have to root first and then use odin im kinda scared right now
Edit:its showing a phone a warning sign and a Pc like connect phone to pc
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)? It should look similar to the attached file.
jmtheiss said:
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)?
Click to expand...
Click to collapse
Eh yes its i managed to trouble shoot it and its reboting everything is ok and yes it did show a yellow text box as of right now i just need to pop in the sym and reboot i have succesfully flashed 2.1 i just need to root and get CWM thru Room manager correct me if im wrong.
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
jmtheiss said:
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
Click to expand...
Click to collapse
I just rooted now all I need is CWM and thank you for all your help!
Glad it worked out. Don't be afraid to ask more questions in the future, as a reply to a question you've asked could help someone else with the same question out.
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Miami_Son said:
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Click to expand...
Click to collapse
I did ALOT of searching before thinking of posting this,the reason I did it was because most of the post are from 2010 and I had doubts on if I should use those methods or if there where new ones.This is the Q&A sub-forum right?I did just that ask questions.
Ok I got a quick question and the searching I've done really hasn't turned up anything definitive. I've got andromeda 3 right now and a back up from rom manager from when my cappy was stock running 2.2 and just rooted running either possibly onix or speed mod kernel that I made before I went with andromeda and, I also have a stock kernel backup from sgs kernel flasher.... I know I was very paranoid before my first rom flash. My question is if I wanted to go back to stock at some point should I just use clockwork to restore the nandroid I made with rom manager and flash the kernel after with sgs kernel flasher or should I do an odin 1 click to get to stock 2.1 then use mini kies to go back to 2.2. I guess it wasnt too short, really I just wanna know is one way 'safer' than the other to go back to stock if I decided too.
Sent from my SAMSUNG-SGH-I897 using XDA App
There is a cwm flashable stock image in dev somewhere, I don't have it bookmarked sorry. I always use ODIN to go stock. Doing a nandroid backup wasn't backing up all the files like it should back in the day. Not sure if it is now, but I never relied on it. I haven't used kies in months, no need to do a stock update. But, really, the only reason you would want stock is if you're selling it, warranting it, or something where you need stock on it. AdamOutler is working on heimdal. I think there is stock version of it. But as far as bootloaders go, you're on 2.2, now. ODIN brick is ok. I've had a few. Jig will solve it.
Edit
I guess, to answer your question, ODIN is fine going from any 2.2 rom to stock 2.1. The trouble is going from 2.3 to 2.2 or 2.1. Then the bootloaders change. If something messes up in the process, you're screwed.
Ok thanks that's what I've been trying to figure out, and yeah I have no reason to wanna go stock but its just for future reference, wanted to sell *gasp* or need to have it repaired. Who knows maybe i'll throw my back up at it at some point just to see what happens and see if it really was a full back up and I'll search for what you mentioned. Kies has worked the one time I used it so maybe I'll try that for fun and see if it goes alright again. Really I'm just looking for the fastest way to go back which if it goes alright should be my rom manager back up. Thanks for mentioning the deal with 2.3 roms from the forum threads I've read it seemed kinda risky to make the jump so I've stuck with 2.2 roms so far.
Sent from my SAMSUNG-SGH-I897 w/ Andromeda 3, OC to 1.3ghx using XDA App
First off don't shoot me. I am interested in getting Gingerbread on my Captivate or another good rom. I have been on the forum for a few years but have never done amything to my phone until now. I just rooted it and installed Rom Manager and Titanium backup. I have been reading so many threads that my head is spinning. There are alot of different roms available but I have no idea of which to use. Can someone please point me in the right direction to put Gingerbread on my phone? I have had this phone for over a year and am ready for a change without having to buy a new phone. I have never flashed a phone before but I have built my own computer, so I am not a total newbe and am not affraid to try something new.
My phone:
Firmware 2.2
I897UCKB1
Kernel 2.6.32.9
Build Froyo.UCKB1
Rooted
Rom Manager
Titanium Backup
Bang!
Sent from my SGH-I897
ou812bkewl said:
Bang!
Sent from my SGH-I897
Click to expand...
Click to collapse
Figures another Texan would shoot me. Good thing I am wearing my bullet proof vest today.
Thanks!
Lol, its cool man....any of the ops in each rom are very detailed in how to flash. Designgears have a great Odin oneclick to stock that's a must have in case something get borked. The Fasty GB roms are my favorite choice. Any of the KH3 roms wont disappoint. Make sure you use the correct bootloaders too. Happy flashing!!
Sent from my SAMSUNG-SGH-I897 using XDA App
http://forum.xda-developers.com/showthread.php?p=7287634 check this out here for back-to-stock info. I would try CM7 since you already have some experience with it. They have allot of info in their thread in the Dev forum. That is what I run and I like it because I didn't have to flash bootloaders and its one of the simplest to install. Is your captivate running stock 2.2?
Sent from my SGH-I897
Not difficult at all:
*download ODIN 1.81 on your pc
*download latest KI2 stock ginger rom from the dev forum
*back up your apps etc using titanium backup to external sd card
*perform factory reset on cappy
*open ODIN and place downloaded .tar file that u downloaded earlier in "PDA" section
*turn off phone and hold vol up&down while turning on to start download mode
*plug phone in usb cable hooked to computer
*say a small prayer, lol
*once connection is established, press start on ODIN
*when flash is completed phone will reset, u may unplug usb cable when u see the ATT screen on phone
*that's it, if your successful then u can perform root, which is done differently than 2.2, so be prepared, I can PM u or respond here to tell u how if your successful with the gingerbread flash.
Good luck, and remember, bootloaders will be flashed, so there is an outside chance to screw your phone, so proceed with caution.
If I use Titanium Backup then don't I need to be rooted in order to restore my apps and contacts?
ou812bkewl said:
http://forum.xda-developers.com/showthread.php?p=7287634 check this out here for back-to-stock info. I would try CM7 since you already have some experience with it. They have allot of info in their thread in the Dev forum. That is what I run and I like it because I didn't have to flash bootloaders and its one of the simplest to install. Is your captivate running stock 2.2?
Sent from my SGH-I897
Click to expand...
Click to collapse
Duh! Read the OP stupid! (Schizophrenic humor) Ok. Remember CM7 might not have the best battery life but I have always seen it as the least risky way to get GB running on the Captivate because you're not flashing bootloaders that are different from what you already have with stock 2.2 . The ONLY time I ever hard bricked was when attempting to flash GB bootloaders over Froyo bootloaders. Just be careful.
Sent from my SGH-I897
LBCaptivate said:
If I use Titanium Backup then don't I need to be rooted in order to restore my apps and contacts?
Click to expand...
Click to collapse
You have to be rooted to restore apps using titanium, not for contacts though.
ou812bkewl said:
http://forum.xda-developers.com/showthread.php?p=7287634 check this out here for back-to-stock info. I would try CM7 since you already have some experience with it. They have allot of info in their thread in the Dev forum. That is what I run and I like it because I didn't have to flash bootloaders and its one of the simplest to install. Is your captivate running stock 2.2?
Sent from my SGH-I897
Click to expand...
Click to collapse
My Captivate is stock and rooted.
Titanium Backup requires root to backup or restore anything.
Sent from my SGH-I897
nok6100 said:
You have to be rooted to restore apps using titanium, not for contacts though.
Click to expand...
Click to collapse
I would be using Titanium to backup my contacts unless there is a better way. I have several groups in my contacts for work and personal ring tones for different groups. It would be a major pain to have to set them up again.
LBCaptivate said:
I would be using Titanium to backup my contacts unless there is a better way. I have several groups in my contacts for work and personal ring tones for different groups. It would be a major pain to have to set them up again.
Click to expand...
Click to collapse
What I have always done is to export my contacts to the external sd card by using "import/export" function in the contacts app, not sure if it would have a impact on all of your settings though because I have always used a simple setup, single ringtone for everyone in my contacts. Just be prepared in case something doesn't work as expected. I have no experience with using titanium to backup the contacts.
nok6100 said:
What I have always done is to export my contacts to the external sd card by using "import/export" function in the contacts app, not sure if it would have a impact on all of your settings though because I have always used a simple setup, single ringtone for everyone in my contacts. Just be prepared in case something doesn't work as expected.
Click to expand...
Click to collapse
Exporting the contacts is not an option since it will take a contact with multiple numbers and turn them into an indvidual one for each number. I have used AndroidSync Wifi to backup contacts and it seems to work pretty good. I have never used Titanium before so I am not sure how well it works with contacts.
The easiest way to back up your contacts is to save them to google. Lol. +1 on the KI2 rom, Flashed it a few days ago and it's amazing... I'm no longer tempted to cash in 80 hours of PTO to get the Galaxy SII tomorrow.
nbell13 said:
The easiest way to back up your contacts is to save them to google. Lol. +1 on the KI2 rom, Flashed it a few days ago and it's amazing... I'm no longer tempted to cash in 80 hours of PTO to get the Galaxy SII tomorrow.
Click to expand...
Click to collapse
Do you know which thread has the current information on KI2? There are a lot of different threads. Thanks!
Never mind. This is getting to confusing. Some say you need a kernel and some don't. Then there is the Flash clockworkmod Recovery. Is this the same thing that is in Rom Manager? Do I get the full version of Rom manager and flash with that? Do you use Odin? Do you flash to stock? I am already running 2.2 rooted.Threads are 500-1000 pages long, some have old information, ect.............where is the most current updated information????? CM7 nightly builds?? Do you flash everyday? Is there a stable build? Ect.........
KI2 original thread
http://forum.xda-developers.com/showthread.php?t=1282369
download link is in there, just stick the file in the pda slot in odin, put phone into download mode, and flash away... everything you need is in that file (bootloaders, kernel, etc).. it's the stock at&t leak, so it also has bloatware, but oh well.
nbell13 said:
KI2 original thread
http://forum.xda-developers.com/showthread.php?t=1282369
download link is in there, just stick the file in the pda slot in odin, put phone into download mode, and flash away... everything you need is in that file (bootloaders, kernel, etc).. it's the stock at&t leak, so it also has bloatware, but oh well.
Click to expand...
Click to collapse
^^^^^^
After you get stock 2.3.5 Root with Fugu Method here:
http://forum.xda-developers.com/showthread.php?t=1127249
In step 6. replace KF1 kernal with Boogs modified KI1 Kernel here:
http://forum.xda-developers.com/showthread.php?t=1242533
ClockWork Mod recovery with Boogs KI1/KI2 Kernel Here:
http://forum.xda-developers.com/showthread.php?t=1242533
Then you'll have KI2, Root, CWM Recovery, Init.d Support.
If you want extended power menu and crt animation follow with emunees [CWM][DEODEXED][ROOTED][ZIPALIGNED] I897UCKI2 [Android 2.3.5] here:
http://forum.xda-developers.com/showthread.php?t=1283566
And the Ext menu and CRT Zip is here:
http://forum.xda-developers.com/showthread.php?t=1283075
This will give you the latest and greatest Closest to stock 2.3.5 ROM with CWM and Root. Im a nubby and I pulled it off. So anyone can do it.
Steve
I still have not flashed. Have been reading threads for hours and hours. So much information and so many Roms Here is what I would like, swipe, get all my contacts back in groups (important for work)and a good stable rom. Seems like each rom has its issues, GPS, download ability, speed of download, some media files not working, poor call quality, not getting text messages, ect......... I know that the developers don't like to recommend roms but with all the different roms and some threads being close to 1000 pages long, it is hard to tell what is considered stable and what is an alpha or beta and what is current. The information on my phone is below. Any help or suggestions to a few good roms with complete instructions would be appreciated. Is rom manager even an option for flashing?
I would understand if the mods close this thread but I am sure that I am not the only one overwhelmed by all this information. It is pretty amazing how many people contribute to the development of all the different Roms.
Thanks again for any help or guidance!
Okay first of all, I would like to apologize if this is being posted in the wrong forum, or if I am upsetting anybody by posting this. I have searched all over for a couple days trying to figure this out. This is my last resort, and I'm hoping you guys can help. All of your time and understanding is much appreciated!
So a little background. About a week ago, I rooted my AT&T Captivate 2.2(build number 1012 if that helps) using Superoneclick, and then flashed CM7.1 using clockworkmod. I was not satisfied with CM7.1(terrible battery for me, other various reasons). I then downloaded MIUI (not sure which version, the one available on the premium version of clockworkmod) and flashed it using clockworkmod. This started with the cm bootscreen, and then went to an MIUI bootscreen that played a little tune. The miui screen looped, and it would not go past this.
After rebooting and running into the same thing, I went to f\attempt to find a solution. I thought I backed up my rom, but it had been erased (issue with the external sd I think). I used an odin one click I found on here, but this odin one click brought me back to eclair 2.1, instead of 2.2. Up until now, I could get into both download and recovery mode using the three button method, and now I can't. I am not sure what to do exactly. I have read about getting it into download mode using adb, but I'm not sure if that would work in my situation, and I'm not too educated on adb or android sdk. I stayed up almost all night last night, and now have researched most of today, not making much progress.
Thanks again for your time!
Just to clarify have you used all button methods in order to try to get into download mode. Seems as though flashing bootloaders may have f'ed up you combos. I have a couple suggestions. I'll edit my post as I find the urls to post for you
Stock GB ROM you should be using -- http://www.mediafire.com/?05nemq5yyn5fuqf, this one has bootloaders, but preferably you should use stock odin roms that don't mess with the BL's (after this of course, since yours are messed up right now).
Now of course this depends upon you getting into download mode. If you can use ROMmanager (btw, I don't recommend you download your roms from rommanager, as that will not always be the most up to date and may not be the one for you) to get into recovery mode, then from there go to advanced then reboot download. However some kernels do not support this. Try the cable methods before trying this method.
First of all, I appreciate your help Mikel.canovas. I have used all the button methods. I can no longer get into recovery or download. (Romtoolbox enables me to get into recovery(2E), but not download). I now have root access, but am not able to sideload apps, and apparently rommanager free isn't available on the market. I did buy rommanager premium, but unfortunately now that I basically reset my phone, it doesn't show up as bought (known issue, apparently not resolved?), and even after I bought it again, it says I need the free version to even use the premium version.
Should I go through the process to be able to sideload apps? Or will romtoolbox do the trick? Rom toolbox gives me the option to install a rom from my sd card. Should I use that, and select the GB ROM you provided? I'm not sure I understood exactly how you want me to get that GB ROM onto my phone.
What I want to eventually have is either MIUI or rom fasty on my phone. If possible, could you give me some steps on how to reach that goal?
Thanks again for your time. Eclair on the captivate is not pleasant, especially since I had a taste of CM.
Well first off I highly recommend Mosaic over CM or Fasty, solely because of performance and battery life. However that is all subjective.
Ah since you're rom is sending to 2E recovery, you're not rooted with cwm. You need to flash another kernel that supports this. Afterwards, If you can get into CWM, I recommend putting CM onto your sdcard and flashing from there. After booting into CM hold down the power button, press reboot, choose reboot download. See if that works. If not, does adb reboot download work for you? If not again, I recommend trying another USB port, reinstalling drivers, trying different button combos. I've had issues getting into download mode in the past and, trust me, it is VERY frustrating.
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
korockinout13 said:
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
Click to expand...
Click to collapse
Or download SGS Kernel Flasher from the market. You can then flash kernels with the app. without having to go into download mode. Very handy.
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If nobody beats me to it, I will post you some links tomorrow when I'm on my laptop.
Oh, and miui won't really give you better battery life than CM7. It basically is CM7 with a different UI. I loved CM7 a ton, so if you are having issues with it, let me know! With the right kernel and other settings, battery life is pretty decent, as long as you charge nightly.
Sent from my ICS i897 Captivate
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Alright, thank you, I will be checking back tomorrow.
Eventually what I want is to have the working 3 button combos again for both download and recovery mode, and either the miui, mosaic or rom fasty on my phone.
Easy flash GB BL's and you won't have to worry about 3 button problems!
If you didnt do a Master Clear, now would be the time. Make sure you back up anything you want to keep. MC will erase EVERYTHING on your internal SD
Remove your Micro SD, and your SIM
Download:
OneClick Root
SideLoadWonderMachine This also has CWM, 3ButtonFix and ROM Manager in the zip
Make sure you have Debugging enabled
Connect to your PC
Run One Click Root, and follow the instructions, reboot
Run Sideload Wonder Machine and direct it to install ROM Manager
Copy the update.zip(CWM) and 3Button Fix to your phone
Open ROM manager and "reboot to recovery"
You'll go thru the boot twice to get to CWM
In CWM install the 3 Button Fix
I usually pop out the battery and check it before I put the ROM in.
VERY IMPORTANT!!!!! DO NOT TRY TO USE THE 3ButtonFix while you have a GB ROM installed you WILL brick your phone. It only works on 2.1, and 2.2 ROM's
using this one click package I now am able to manually enter download and recovery :
http://forum.xda-developers.com/showthread.php?t=1129821
However, The recovery is still 2e..
kangi26 said:
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Click to expand...
Click to collapse
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
wwcjr91 said:
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
Click to expand...
Click to collapse
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
kangi26 said:
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
Click to expand...
Click to collapse
Trying to fix my buddys cappy. Its rooted on T-Mobile and running stock 2.1 rom. I'm not a Samsung guy so how do I get cwm and a 2.3 rom? The build number is ECLAIR.UCJH7
Sent from my Incredible 2 using xda premium
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Post #3 has the "leaked" KK4 (Been confirmed to be the same as official).
4-2ndtwin said:
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Click to expand...
Click to collapse
Since its already rooted do I need a computer?
Sent from my Incredible 2 using xda premium
Yep. Because these are Odin or Heimdall One Clicks.
You can't just flash to a GB firmware/rom from Eclair/Froyo without using Odin or Heimdall to at least get the Gb Bootloaders. You cannot just go through CWM recovery unless u already have the GB Bootloaders.
Of course u can get it all through mini Kies, the official GB 2.3.5 KK4 update that is.