Related
Is there a file in the android system that, sort of like an autoexec.bat, lists what to do on startup? For example forcing the system into recovery or download on power on?
I flashed the latest Vibrant firmware and did so with the option to repartition, which Im now finding out was not the right way to flash this one.
Long story short, it didnt contain the dbdata directory information and now, I am unable to boot and unable to get to download. I still have ADB access, it just isnt responding to ADB reboot download, it just comes right back up booting into recovery to flash the last stage of odin before it starts up.
Is there a way to force the phone back into download mode or force it to stop rebooting into recovery?
Pull battery out and USB to use the hardware buttons to manually get into download mode?
P.S. wrong forum
Aren't there some apps that can do that? I do it manually but like you said its not working for you, p.s im downloading that firmware
Sent from my SGH-T959 using XDA App
iwillkillyou said:
Aren't there some apps that can do that? I do it manually but like you said its not working for you, p.s im downloading that firmware
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
OP said that he isn't able to boot so I believe he's stuck on the loadup to Android.
zephiK said:
Pull battery out and USB to use the hardware buttons to manually get into download mode?
P.S. wrong forum
Click to expand...
Click to collapse
Manual buttons arent seemingly working, so far ive tried every conceivable combination of vol up down and power, even if all I do is plug the phone in Im back in recovery before the battery turns green.
(ps. I know, but I had a billion percent better chance not getting a mouthbreather response, despite the definite chance of flame posts lol)
Viralblack said:
Manual buttons arent seemingly working, so far ive tried every conceivable combination of vol up down and power, even if all I do is plug the phone in Im back in recovery before the battery turns green.
(ps. I know, but I had a billion percent better chance not getting a mouthbreather response, despite the definite chance of flame posts lol)
Click to expand...
Click to collapse
Try every step here: http://forum.xda-developers.com/showthread.php?t=771247
Have you successfully gotten into Download mode with hardware buttons before? Or are you one of those vibrants with "locked download?"
I have a feeling mines locked, Ive never used the buttons to successfully get into download mode, just adb reboot download
EDIT: Tried the posts suggestions, problem is second I plug in the USB and the battery pops up it goes right to recovery. Even if im holding the buttons before hand.
Viralblack said:
I have a feeling mines locked, Ive never used the buttons to successfully get into download mode, just adb reboot download
EDIT: Tried the posts suggestions, problem is second I plug in the USB and the battery pops up it goes right to recovery. Even if im holding the buttons before hand.
Click to expand...
Click to collapse
x_x don't know what to tell you then. With locked hardware, you have to be really careful because if something goes wrong you cant manually get back in there. Do you have Clockwork Recovery? try restoring to a previous nandroid backup.
zephiK said:
x_x don't know what to tell you then. With locked hardware, you have to be really careful because if something goes wrong you cant manually get back in there. Do you have Clockwork Recovery? try restoring to a previous nandroid backup.
Click to expand...
Click to collapse
I was working with that a bit, but it just kept getting to datadata and being unable to wipe or flash to it due to the odin botch. I tried wiping it clean and it just wouldnt let me do that to reflash.
So now im stuck at the samsung recovery screen without the ability to get into clockwork or flash lol
This smells like 130 bucks for a new phone I think... brick number two >.>
Viralblack said:
I was working with that a bit, but it just kept getting to datadata and being unable to wipe or flash to it due to the odin botch. I tried wiping it clean and it just wouldnt let me do that to reflash.
So now im stuck at the samsung recovery screen without the ability to get into clockwork or flash lol
This smells like 130 bucks for a new phone I think... brick number two >.>
Click to expand...
Click to collapse
Why did you change update.zip? Update.zip should always lead to Clockwork :|
zephiK said:
Why did you change update.zip? Update.zip should always lead to Clockwork :|
Click to expand...
Click to collapse
I didnt! But when I was formatting and it failed to reapply the nandroid completely cause of the section it couldnt mount, now when I hit reinstall packages it just reboots. Same with shell, it just yells at me and tells me to die in a fire.
if you didnt figure this out, the way to fix it is to first flash WITH ODIN the original JVD firmware and check repartition, then flash the new one IN ODIN without the repartition box checked.
first update includes the dbdata that the phone is looking for.
Yeah, I figured it out now, but Odin is seriously the devil if your phone doesnt have the hardware buttons enabled.
Now heres a question, if I can still get into stock recovery... is there a way to like, you know, recover using the stock system? lol
BUT THE GOOD NEWS IS that Tmo is letting me warranty out my phone for free, shipping me a new one, and gave me a loner while I wait.
TMo for the win.
Viralblack said:
BUT THE GOOD NEWS IS that Tmo is letting me warranty out my phone for free, shipping me a new one, and gave me a loner while I wait.
TMo for the win.
Click to expand...
Click to collapse
lol looks like you and I are in the same boat man. Hardware lock FTMFL. I have never been able to get into download mode, or recovery mode with the hardware keys, only with adb reboot recovery/download and terminal emulator app with SU privs. I wish there was a jumper we could reset to unlock it haha that'd be the s*# son. Good old pentium 133 in the palm of the hands, but no . Atleast they are taking care of the people who don't do things properly.
I did the same thing and ended up with the same problem, but i was able to get in into download mode. When i would plug it in it would try to boot into recovery after the battery screen i would use the keys to make it boot to download mode instead of recovery, it was a *****, but i got it, though idk if there is another way for people with locked down phones.
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
alxpowa said:
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
Click to expand...
Click to collapse
Without download mode (VOL Down, Home, Pwr) then your only options is to either send it in for repair or try to get download mode working with a homemade Jig.
More on that Here.
I heard story's of people of forcing it to go into download mode using heat as well from say a hair dryer. But I do not recommend that.
"I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device"
Click to expand...
Click to collapse
Also I'm just curious as how you used odin without even having download mode? I'm having my doubts that when you said I know this question has been asked many times but you have not found a good answer is true. Next time do a bit more reading before just flashing your device. If you have even 1 thing your not sure about when flashing your phone that's 1 to many.
Puzzled also .
First question has to be can you actually get the phone into download mode .
Thats the big yellow download sign .
That has to be your first step get download mode on your phone .
Odin does not work without download mode so if no download mode who knows what you where trying to achieve or did achieve .
jje
No, I could get it in download mode BEFORE attempting to flash. Then I started Odin.
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
alxpowa said:
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
Click to expand...
Click to collapse
Remove Kies and reinstall that will make sure the drivers are OK .
Get into download mode if 3 buttons fail then you need the jig as posted.
Could try removing battery go to three button download mode and as you are holding down the buttons stick the battery back in to see if it enters download mode .
jje
Thanks guys for all the tips...! But nothing seems to work. It's just stuck at the connect error icon (?) and when I try to go in download mode either way, it just loops. (Icon appears and dissappears)
Two more questions:
1) If i have to get it repaired, do I contact Samsung or my provider ? (Bell in this case)
2) I'm at ease with electronics and stuff, so the jig should't be too hard to do for me, but is it guaranteed to work ? I mean, is it software-independant. Is there a problem that I can have that would prevent it to work ?
Thanks again!
Will work. Had the same issue as yours were I could not get into download mode and the phone would not boot either. The jig saved my phone. You can make your own or you can buy it on ebay. Good luck.
Good, should have all that at my job. Will try it.
Finally, it turns out that I called Bell and they told me that this was a common problem with these devices and they are sending me a new one!
Well.. whatever it was! haha
Thanks again for the help though!
Hey, i made a BIG MISTAKE...
I flashed a stock kernel on a custom ROM (with sgs kernel flasher) but forgot to UNCHECK the reboot button.
now my sgs got stuck at boot.
3button combo won't work and kies isn't installed on this PC..
PLEASE HELP WITHIN 1-2 HOURS!
the only thing what works is the 2e recovery (auto boot into when it got stuck at sgs logo twice)
Have you tried pulling out the battery and then putting it back in, and then trying to get into recovery?
pull the battery out and insert then try to go download mode again if it doesn't work you have to use JIG for enter to download mode.
electrotune1200 said:
Have you tried pulling out the battery and then putting it back in, and then trying to get into recovery?
Click to expand...
Click to collapse
i've edited my post but i cant do anything in 2e recovery
trustsyzaa said:
pull the battery out and insert then try to go download mode again if it doesn't work you have to use JIG for enter to download mode.
Click to expand...
Click to collapse
JIG?
my phone got stuck at boot (or recovery) NOT MORE...
even my PC can't see that a phone is connected
can you install the earlier kernel through 2e recovery?
should i give my phone into repair?
is it warranty then ( i mean no custom thing is flashed)
trustsyzaa said:
can you install the earlier kernel through 2e recovery?
Click to expand...
Click to collapse
how to?
recovery only shows
reboot
flash update.zip
wipe data/factory reset
wipe cache patition
and i idiot pressed wipe data/factory reset
so it means i have to flash the custom rom again and then...?
PoTi_96 said:
Hey, i made a BIG MISTAKE...
PLEASE HELP WITHIN 1-2 HOURS!
__________________
If you like someones post pls press the "THANKS" button
AND PLEASE USE THE SEARCH BUTTON BEFORE ASKING
Click to expand...
Click to collapse
Maybe you should:
1) use a less useless thread subject, a sensible subjects gets you help faster
2) avoid caps and demanding a 1-2 hour solution (unprofessional)
3) respect what's said in the capital letter line in your own signature
4) don't panic! Since recovery mode is still working you should be able to save your phone.
If nothing works, a Jig might help you (see #3 in this posting). If even that doesn't help, you can still send it in for repair after all.
5) general hint: get 3 button combo mode working first before flashing, it's said all over the forums. As a noob, I respected that, got myself a JIG prior and was able to save my phone after a soft brick.
Landorin said:
Maybe you should:
1) use a less useless thread subject, a sensible subjects gets you help faster
2) avoid caps and demanding a 1-2 hour solution (unprofessional)
3) respect what's said in the capital letter line in your own signature
4) don't panic! If nothing works, a Jig might help you (see #3 in this posting). If even that doesn't help, you can still send it in for repair after all.
5) for everyone: get 3 button combo mode working FIRST before flashing, it's said all over the forums. As a noob, I respected that, got myself a JIG prior and was able to save my phone after a soft brick.
Click to expand...
Click to collapse
thanks
i know, but the problem is it's not actually my phone... it's a friends phone
and he wants it back in 2 hours
i told him now he should go to get it into repair and if it costs something i have to pay...
or should i try hamsterbread? it has a ROM and a Kernel in one update.zip?
so how do i get back to stock 2.1 ROM + stock Kernel then?
I am not very familiar with recovery mode (never had to use it to save my phone so far), but afaik you can still flash that way somehow.
Anyways: take your time to not make additional mistakes, if you can save the phone your friend will surely stay your friend, and try what people suggested or will suggest here (change subject title to gain more help faster).
As said, you can still send it in for repair after all but why not try something first with recovery mode? There's not much to lose now anyway.
Do not panic, take a deep breath, ignore the clock! Your friend would be more pissed if you had to send it in (which can take weeks or months)! I wouldn't see why you want to do that as long as either download or recovery mode is still operational. So go change the subject, remove the 1-2 hour demand sentence and I'm sure you will get help!
Btw a jig is some USB dongle or cable you can plug into the phone to activate download mode. Costs just a few euro. Available on ebay as well as self made: http://forum.xda-developers.com/showthread.php?t=819551
So can you get into download mode?
Preferably, you need a 3 file 2.1 stock firmware you can flash with Odin3 using a 512 pit and re-partition.
I have a 3 file stock 2.1 firmware for Australia if you want it. It will at least get you stable, then you can flash anything you want after that.
electrotune1200 said:
So can you get into download mode?
Preferably, you need a 3 file 2.1 stock firmware you can flash with Odin3 using a 512 pit and re-partition.
I have a 3 file stock 2.1 firmware for Australia if you want it. It will at least get you stable, then you can flash anything you want after that.
Click to expand...
Click to collapse
nope :/
ok i usually got it into clockwork recovery (dont ask me how :O )
and flashed the custem kernel and custom rom i was using before again.
now it got stuck at "ultimate kernel" logo -.-
THX 2 ALL FOR YOUR HELP
i love you guys
Just try this before you panic.
Pull the battery. Hold the power button for 10 seconds. Put the battery back in.
Hold the download mode sequence until it forces itself into download mode. Sometimes it can take a minute. Just keep holding it.
electrotune1200 said:
Just try this before you panic.
Pull the battery. Hold the power button for 10 seconds. Put the battery back in.
Hold the download mode sequence until it forces itself into download mode. Sometimes it can take a minute. Just keep holding it.
Click to expand...
Click to collapse
tried that 5 minutes long....
nothing happened... :/ damnit
nothing works... no 3 button thing, not download mode, no recovery, no bootup...
repair?
Order a jig from Ebay and try to get it express posted. Will be alot quicker than a repair center. Then you have one in case you get into trouble again.
electrotune1200 said:
Order a jig from Ebay and try to get it express posted. Will be alot quicker than a repair center. Then you have one in case you get into trouble again.
Click to expand...
Click to collapse
no... I'm not buying stuff for my friend...
i'll say him -> REPAIR
(how much will it cost?)
This was my last phone on anything custom, when it's not my phone damnit...
THX 4 YOUR HELP ANYWAYS
There's a strong chance they will send it right back un-repaired because there's a custom rom on it.
Remind me to never let you borrow my phone...
Sent from my GT-I9000 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=819551
Run to the shop en make a jig.
So I recently made a thread how adb wasn't working and that evolved into not being able to get into download mode. Now after not being able to get into download mode for days, I'm still stuck on cm7 with no way of getting back to stock. 3-button recovery won't work, the only way to get into recovery is adb reboot recovery. No button and cable methods work to get phone into download mode as well as adb reboot download. I even recently tried http://www.youtube.com/watch?v=lojU5bvGz3c which is a makeshift usb jig. I successfully made it but it would only turn the phone on. WTF. I'm afraid to buy a real usb jig from online because it most likely will cause the same thing. What is there to do? I'm completely lost. The phone works, the rom is okay I just cannot get back to stock and get rid of cm7. There are lots of issues I need to fix and cannot because of this. Any ideas?????
EDIT: Now I'm completely f'ed. I tried flashing cm7 instead of MIUI again to try once more if I would have better luck on just cm7, but during flash in cwm the phone turned off because the battery compartment was loose and now the phone boots up and goes into recovery shows some code then turns off again
(This post just in case anyone missed the reason in the edit)
Reason: EDIT: FIXED! Don't know what happened. Rearranged resistors and tried again and finally got it
Click to expand...
Click to collapse
I just went back to cm7/miui and it happened again. Nothing to get into download mode is working. What's wrong with cm7 on my phone?
mikel.canovas said:
I just went back to cm7/miui and it happened again. Nothing to get into download mode is working. What's wrong with cm7 on my phone?
Click to expand...
Click to collapse
What's your process to get CM7/Miui installed?
On a side note, ADB won't connect to your device unless you have the Nexus S drivers installed on you computer when CM7/Miui is installed
When I was last on cm7 adb reboot download doesn't work.
Drivers installed
Just sayin
Sent from my unbrickable cappy *bam*
yeah, i distinctly remember the first CM7 build threads that came up here saying that adb reboot download DOES NOT work, and you DO need working 3 buttons or a jig
not sure why that was removed from the threads
A jig should work
You might be coming into contact with the resistors (I can't watch that youtube video from work--firewalled--so I don't know what the setup looks like). Any contact with the them will make it not work. Try insulating them more with some heavy packing tape.
I cut up my mini-usb plug from my car charger (didn't need it), and peeled off all the plastic so I could easily touch the correct two pins with the jig when the hacked up mini-usb is plugged in. Works like a charm. Sometimes if you aren't touching them just right, or if one end of the pin is touching the wrong point the power will come on.
Try harder with the jig, I guarantee you it will work (and you shouldn't have to buy one--it's too easy to do yourself for less than $2 and about 5 minutes).
Good luck!
Just a thought. Are you installing GB boot loaders before flashing CM7/Miui? If so, the way to get into Recovery/Download mode changes. Recovery is vol+/power, Download is Vol-/power.
Just thought I'd toss that out there...just in case
kangi26 said:
Just a thought. Are you installing GB boot loaders before flashing CM7/Miui? If so, the way to get into Recovery/Download mode changes. Recovery is vol+/power, Download is Vol-/power.
Just thought I'd toss that out there...just in case
Click to expand...
Click to collapse
That is only for I9000 GB bootloaders.
On I897 GB bootloaders its still the same as eclair/froyo!
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
That is only for I9000 GB bootloaders.
On I897 GB bootloaders its still the same as eclair/froyo!
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Yeah, I know, but without all of the details. I figure it doesn't hurt to ask
Sent from a autonomous device
Thanks a ton for the info on GB i've been beating my head trying to get my Mesmerize flashed to a rooted EH09. The vol down button was teh trick i needed.
No download Mode after I897 GB Bootloaders on CM7
Hi there, i've got a question. If i can't get into download mode using the 3 button combination nor the Vol- + Power nor the connect+press buttons+insert baterry trick , do i have chance to get into download mode using the YIG? Thank you
I've lost the 3combo after installing the GB bootloaders with CM7 but the Odin Connection was lost on the SBL, The phone is not even Powering on anymore
If your phone has no signs of life at all, then sadly you are hard bricked...
But it can be fixed through jtag or the unbrickable mod.
So is there hope?
4-2ndtwin said:
If your phone has no signs of life at all, then sadly you are hard bricked...
But it can be fixed through jtag or the unbrickable mod.
Click to expand...
Click to collapse
So if i open the phone and do the unbrickable mod is there a chance to solve the problem? thank you in advance
Yes, according to those that have done jtag or the unbrickable mod, these methods are successful. To get better info though, I would recommend going to those specific threads.
4-2ndtwin said:
Yes, according to those that have done jtag or the unbrickable mod, these methods are successful. To get better info though, I would recommend going to those specific threads.
Click to expand...
Click to collapse
Thank you man i'm going to talk with Adam to see if i can solve the problem.
guilleglad said:
Hi there, i've got a question. If i can't get into download mode using the 3 button combination nor the Vol- + Power nor the connect+press buttons+insert baterry trick , do i have chance to get into download mode using the YIG? Thank you
I've lost the 3combo after installing the GB bootloaders with CM7 but the Odin Connection was lost on the SBL, The phone is not even Powering on anymore
Click to expand...
Click to collapse
I don't think you need jtag (but you can look into it). If your phone is able to at least power on, you should be able to use a Jig to get it into download mode. That is what I did with mine when all the options fail.
good luck.
0gravity1 said:
I don't think you need jtag (but you can look into it). If your phone is able to at least power on, you should be able to use a Jig to get it into download mode. That is what I did with mine when all the options fail.
good look.
Click to expand...
Click to collapse
If the phone doesn't show any signs of life (wich it wont if he failed on sbl) Jtag or Unbrickable Mod would be your 2 best bet. (Id use Unbrickable mode since it will protect you from future issues.)
Sorry haven't checked this thread in a while. My process for going to cm7/miui is flashing stock eclair through odin one click, then rooting and installing cwm. From there I just flash the latest nightly or whatever it is. Nothing I'm doing seems to be wrong
The problem is that I should be able to get into download mode without having to use a jig every single time. 3 button combo should work, but it doesn't when using cm7/miui for some reason
Hello,
I tried to flash back to the stock ROM of Galaxy S and then install a new Jetpack 8.2 custom ROM.
Apparently, since I did a bad search on the internet on finding a stock ROM and pit file, i downloaded a pack from xda with the .pit file pda file phone file and CSC file.
I DONT REMEMBER which it was..i selected all the files from the pack through odin and re-partitioning was ticked (i saw it after the flash finished).
So when the processes was completed waited a bit and since the phone was not responding i pulled it out.
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Is there anything i can do to fix it?
p.s: havent tried a usb jig but from searches i made on the internet and on xda forums ppl said it will prolly not work. are there any instruction on how to make one (link would be appriciated)?
Thanks in advance
Best option would be to try a Jig (you can buy one on ebay or dealextreme) and see if you can go into DL mode. Sometime the button combination for Download mode changes depending on the firmware. Try pressing the middle of the volume rocker and power at the same time.
If not wait for a Jib or build yourself one. There should be instruction in this forum on how to build one.
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
evanogrady said:
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
Click to expand...
Click to collapse
Worth a try. Just tell them it suddenly stopped working and you have no idea what's wrong. It's not like they can power it on and see that you failed flashing it or something. and even if they use a jig they can only get to download mode and reflash it...
even if they say no... a jig costs like $1.5 on eBay. search for "i9000 jig".
Insert if, press the power button and poof, you're in download mode,
the thing is that the phone is not under any warranty or something and the store i got it is far away now !!
JTAG service if you're in the UK: http://www.fonefunshop.co.uk/
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
As long as your bootloader is intact, the jig will get you to the download mode
Wrongly flashed i9000 with i897 rom has been confirmed to work with the jig, but i don't know i9000 with i9003 rom...
Or you can apply the unbrickable mod if your phone's warranty was voided already, if not, send it back to the shop.
immortalcy said:
Hello,
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Click to expand...
Click to collapse
Had that also yesterday putting a new ROM on my GS. The process of writing the PDA halted.. Black screen, no way to start it up en no screen indications of charging etc..
I removed it from my USB, Removed the battery a few times did the three way download mode trick several times and finally I got the download mode screen from where I successfully loaded the new ROM.
So try a few times.. even when you get a black screen !!
let me be clear once more..i downloaded a complete I9003 rom pack from xda... some guy posted..i just missed that it was I9003 and not I9000..
and on odin re-partition was clicked..but the process was completed successfully even thou after that the phone wont start or go into download mode :/
i used not only PDA and PIT files but 2 more was included as well :/ so what i am asking is if this could really have damaged the bootloader or not
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
dk206 said:
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try jig first.
Next try JTAG or UNBRICKABLE mod.
Then Try a service centre.
in case it wokes up.. anyone has links for stock rom and pit to flash with odin?
thanks again
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Taxiozaurus said:
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Click to expand...
Click to collapse
Any updates on this ? cause I'm also having the same issue!
Dan_Aykroyd said:
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
Click to expand...
Click to collapse
Are you 100% sure the JIG wont work if bricked with a black screen. Are there any other possibilities to unbrick the phone. I really need this phone back or my dad will kill me..