One day I was charging my Milestone via USB and I unplugged it. The USB pins came out with the charger. My carrier told me that it was user-induced damage and not covered by the warranty, as well as telling me that you can't replace the charging port, so I'd simply have to buy a new phone.
This was quite unacceptable to me, so I went around to cellphone repairing shops and none of them have been able to fix it. In fact, the most recent attempted fix has left the back panel ripped apart, too!
The phone was in perfect condition before.
So does anyone know where I can find this elusive charging port - is it so special to the milestone that I can't replace it with another phone's USB port? I also need international shipping. Yes, pigs fly.
I have a dead Motorola Droid.
It sure is the same charging port.
PM if you are interested, I can ship worldwide.
MGA2009 said:
I have a dead Motorola Droid.
It sure is the same charging port.
PM if you are interested, I can ship worldwide.
Click to expand...
Click to collapse
I see you're still trying to get your phone to work. I may take you up on the offer, but I'm going to try one last phone technician to see if he can fix it. If he can't, I'll find out if it's just because of the port or because of general incompetence. Then I might be able to take the phone off you. Thanks for the offer.
Hi I am looking for a motherboard for my milestone. I am from Germany. My Milestone has a water damage. The only thing that does not work is the touch.
I think if I were an undamaged motherboard in it have ,it work again.
Does your motherboard?
Dear Greetings from Germany Misch xD
won't you need a new touch panel as well? if ur mother board failed, how did u determine touch doesn't work?
Hi
Hmm I think that the motherboard is damage. Because it has water damage suffered.
but maybe I should first install a new touch. Although I think the honest, the motherboard is scrap.
Do you have to sell a Touch?
thx
Related
Wow I am wanting to replace my usb miniport myself I have the AT&T Tilt 8925/HTC Kaiser. The other day I was trying to reset the phone In the Dark thought that I was pressing the reset button on the bottom of the phone, what was happening I had my styles in the usb port DAM IT!!!! Next thing you know I go to charge and the USB port just falls back I then open the unit, and find the usb port has broken from the motherboard, seems to be a pretty clean break, all I need is a new MINIPORT does anyone know where I can buy? An OEM port...
Please HELP!!!!
Afrojack
HELP USB Miniport Broke
Can someone help I have an issue, I broke my usb port, I have the phone opened, I was able to access the usb port it has been completely broken off the board, seems to be broken of clean no cracks on the board, all I need is the usb port does anyone know where I can buy a miniport? Also the correct size of the head for the Soldering pen? Is there anything else I may need to repair this issue. Keep in mind I have the phone open, and Have the ability, but if there is any more steps I may use I would really appreciate it. Thanks
AfroJack
Is this a common problem? Mine is now loose, and it will be so annoying of it breaks off the mobo.
I don't know anywhere where you can buy the miniport, but surely warrantee will cover fixing the miniport?...
I did almost the exact thing a couple days ago. I only noticed now from this post. My pins were bent but it didn't break. I had to bend it pretty far so my charger would work again. Do you have pictures of what it looks like from the inside? Maybe you can buy a cheap device with the same pin layout?
No Picture
No I dont could take one, the usb port broke off the board I have talked to PocketPCTechs.com They will sale me a USB Port for $25.00 dollars I wish they had a picture of it maybe I will call them for a picture. They also said they will fix it for $79.00 dollars. I would like to do myself but for 79.00 dollars well I think it is well worth it.
I had the same problem 25 for the part 0 for a local company to put it in. pocketpctechs does give you the mogul usb port which I think is better than what comes standard on my kaiser. (humorous fact htc wanted $350 and 3 wks to fix it)
its not covered under warranty its considered misuse
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
there are disassembly pics somewhere on this page, if your comfortable soldering it shouldn't be a problem. did it w/ my 8525.
Hey maybe you can extract the port from this:
http://cgi.ebay.com/New-HTC-MINI-US...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I get one like the one I posted and it has the HTC symbol on it and everything. It looks OEM to me. Well the mini usb port on there to where you can plug in the headphones has all the pins on there and it seems like you would be able to just extract the one on the adapter for much cheaper. (around $5)
HTC repairs
I recently sent my kaiser to htc repairs USA austin tx and had to give them my credit card number. Anything they find broken not covered by the warranty they fix for $28 which seems cheap since you know they will repair it the right way. Also its oem parts
Hey I am currently living in Austin, TX for school. I just have an ATT Tilt and am not with ATT so I am probably not covered by anything.
damn, smaething happened to me , but it didnt broke off the phone, now that i look at it the usb thing its bend, now I know why the charger didnt want to plug in yesterday...
HTC has a one year warranty and as I stated befor they will fix non warranty items for only $28. That is what I was told when I sent in a Tilt that was not with AT&T.
I think mine must be bent or something too. The USB goes into it to charge, but it falls out really easily. It's not as big of a deal if i am charging it at my house and just leave it alone. The problem is when I'm in my car and it moves around and the charger falls out when it just slides a little bit.
taylor310 said:
I think mine must be bent or something too. The USB goes into it to charge, but it falls out really easily. It's not as big of a deal if i am charging it at my house and just leave it alone. The problem is when I'm in my car and it moves around and the charger falls out when it just slides a little bit.
Click to expand...
Click to collapse
Thats how it started with my apache, now it doesnt charge at all. I found a site on google, search for PPC techs and they do the repair for $60, but you have to be without the phone for that time.
Tilt port repair from HTC USA
Called them about a port repair and was told it would probably be around $350 since it is part of the main board. Might be covered under warranty, up to the technician to determine if it is a normal failure or customer caused.
Too big a crap shoot!!
I just had the same thing happen, and they also told me it was "user error" and that it would be $300+ to fix...... this is clearly a manufacturing/design error and should be covered by warranty!
Big_Dutch said:
I just had the same thing happen, and they also told me it was "user error" and that it would be $300+ to fix...... this is clearly a manufacturing/design error and should be covered by warranty!
Click to expand...
Click to collapse
Just bumping this thread because I have the same problem. One of the metal pins inside the usb port ended up being "pushed down" so my phone wouldn't charge/connect to activesync.
It might be time to move on from an HTC phone, I guess.
The phone was a refurb though, and I've had it for 8 months.
So I recently broke my mini usb port when trying to fix the pins so it would work with my car charger. The first time I did this it worked flawlessly, but when I did it again the 5th pin broke. I know you can buy a replacement piece for like $5, but how hard is it to fix yourself? I talked to my dad who used to be an electrical engineer and he said you need a special soldering gun to install it. Is this true? If so, would it be like around $100 to have someone do? Also, does anyone know if a computer repair store could fix it? I have had my phone for about a year so I believe the warranty is gone since I didn't get an extended one. Any info would be greatly appreciated. Thanks.
Problem fixed
I had this same problem with my at&t tilt, broken usb port. I search the web and found a company called pocketpctechs.com. Order the sync connector repair service which is around $80. i sent them my phone and they fixed my problem hopefully this is helpful.
80 bucks? ow ._.
this happened to me a while back. Found ppctech and place my order as well. just went down there and dropped my phone off since it was close by. Picked it up the same day. Price is kind of steep, but couldnt find anything else. Tech who fixed it asked me if I like the modded rom I had on it and he was thinking of puting it on there too. lol
Thanks. I would prefer to take it to a shop because I can't be without a phone for a couple days. Could a computer repair shop do this kind of work if I bring in the part? I got one of those local.
why dont you ask that shop if they will be able to do it?
So, I have bought a xperia x8 from a friend for around 30$ without a box, charger, nor earphones. when i got the phone from him, i was surprised that i got it for that little, because it was in good shape. But, when i tried to charge it, I had to struggle to put it in a posititon to charge. after 2-3 days it has stopped to charge at all, i opened it to see what is it, because it has no warranty, so idc, and i noticed that the USB port disconnected from the motherboard. so, is there a way to fix it?
mario00231 said:
So, I have bought a xperia x8 from a friend for around 30$ without a box, charger, nor earphones. when i got the phone from him, i was surprised that i got it for that little, because it was in good shape. But, when i tried to charge it, I had to struggle to put it in a posititon to charge. after 2-3 days it has stopped to charge at all, i opened it to see what is it, because it has no warranty, so idc, and i noticed that the USB port disconnected from the motherboard. so, is there a way to fix it?
Click to expand...
Click to collapse
Find yourself a repair shop to have a look at it. If the micro USB connector came off the motherboard chances are very likely that the printed lines could be damaged as well, in which case a repair is either tricky to do or simply impossible as it would require the replacement of the motherboard (and I think that without warranty a new phone may be cheaper).
Anyway, if your "friend" didn't tell you about the damage then I would return tohe phone to him and ask for money back.
B.Jay said:
Anyway, if your "friend" didn't tell you about the damage then I would return to phone to him and ask for money back.
Click to expand...
Click to collapse
+1!! Better you return that phone and get you f**king money back Dude!
+1 return that f++++ phone or find a repair man that can fix it
Hello,
I live in India. I bought an HTC One from a seller on ebay, who has imported the phone from Hong Kong.
Few days ago, the phone's charging port stopped functioning properly. I took the phone to HTC Service Center to get the port repaired. But the repair person at the service center says that as the phone is from out of India, the charging port is not compatible with the one he has in stock.
He says he can put it in, but it may cause issues.
Can anyone please give me advice about this? What difference do connectors have and what issues can be caused due to this? The service centre guy says he cant say what issues may occur, anything may go wrong because of it...
Im sorry I know its a trivial question but I hoped that if anyone has any hardware knowledge about this, they could help me take a decision whether i should put in the "non-compatible" charging connector.
Thanks in advance
anibjoshi said:
Hello,
I live in India. I bought an HTC One from a seller on ebay, who has imported the phone from Hong Kong.
Few days ago, the phone's charging port stopped functioning properly. I took the phone to HTC Service Center to get the port repaired. But the repair person at the service center says that as the phone is from out of India, the charging port is not compatible with the one he has in stock.
He says he can put it in, but it may cause issues.
Can anyone please give me advice about this? What difference do connectors have and what issues can be caused due to this? The service centre guy says he cant say what issues may occur, anything may go wrong because of it...
Im sorry I know its a trivial question but I hoped that if anyone has any hardware knowledge about this, they could help me take a decision whether i should put in the "non-compatible" charging connector.
Thanks in advance
Click to expand...
Click to collapse
The charging connector is universal. Did you speak to the service rep or the technician?
Edit: are they doing it for free??
n1234d said:
The charging connector is universal. Did you speak to the service rep or the technician?
Edit: are they doing it for free??
Click to expand...
Click to collapse
No, they are charging some amount, i guess some Rs. 500 or so
I spoke to the technician..
Try aftermarket repair there are also good technician can help you charging points are now same for all companies at least HTC won't use two different types
anibjoshi said:
No, they are charging some amount, i guess some Rs. 500 or so
I spoke to the technician..
Click to expand...
Click to collapse
yatindroid said:
Try aftermarket repair there are also good technician can help you charging points are now same for all companies at least HTC won't use two different types
Click to expand...
Click to collapse
I'd say, don't go to an aftermarket technician. If HTC is taking only 500, get it done there. At least they'll disassemble and reassemble the phone the right way. Also, aftermarket parts aren't the same quality as the ones HTC will give you. I've bought an LCD assembly aftermarket, and there is a noticeable difference, between OEM and that (although it is 100% genuine, it just isn't as good)
yatindroid said:
Try aftermarket repair there are also good technician can help you charging points are now same for all companies at least HTC won't use two different types
Click to expand...
Click to collapse
I was considering taking it to an aftermarket repair centre but I had concerns about the way they handle the housing...unfortunately the HTC One is so difficult to open without damaging its outer body
n1234d said:
I'd say, don't go to an aftermarket technician. If HTC is taking only 500, get it done there. At least they'll disassemble and reassemble the phone the right way. Also, aftermarket parts aren't the same quality as the ones HTC will give you. I've bought an LCD assembly aftermarket, and there is a noticeable difference, between OEM and that (although it is 100% genuine, it just isn't as good)
Click to expand...
Click to collapse
So there wont be any issue about the non compatible charging port right? I will ask HTC guy to put it in then.
anibjoshi said:
So there wont be any issue about the non compatible charging port right? I will ask HTC guy to put it in then.
Click to expand...
Click to collapse
I thought HTC technician not helping you
if he do whatever you say then tell him just put new connector NO Problem !!
Update: For anyone who may have a similar problem, I got it replaced from HTC Service Center and it works fine! No issues.
Thank you for your help guys!
Hi guys, I hope you can help me out here.
I have a Samsung Galaxy S4 Active, I originally purchased it in Malaysia, broke it and took it to Malaysian Samsung and had it replaced on the warranty. Fast forward 8 months later I am back in the UK, my phone is completely unmodified, original everything.
I place it on charge whilst I am using it in bed, I notice that it stops charging after a while of me using it, I assumed I must've knocked the cable, so I readjust it and carry on as normal until I put it on the side and go to sleep.
After waking up in the morning it becomes apparent that it didn't charge at all and the battery died in the night, I check the usb is still plugged into the phone and the plug socket, all a-okay. Strange. I then asked for my housemates charger, no luck still wouldn't charge.
A few days later a replacement battery arrives, also wouldn't charge. Must be the USB then surely? Well, I replaced that also, tested both batteries with it and still no luck.
Any idea guys? I'd hate to see an 8 month old phone die for no reason.
Thanks
P.S. I have tried it from a wall socket and my PC USB.
Maybe the USB port is busted? Was it hotter than normal when you last used it? Have you submerged it in water before the incident happen?
VIPNobie said:
Maybe the USB port is busted? Was it hotter than normal when you last used it? Have you submerged it in water before the incident happen?
Click to expand...
Click to collapse
I have tried replacing the USB and it hasn't fixed it at all, and at no point has this one been submerged. I learned not to do that with the one that had to be replaced on warranty :/
Also all of the moisture indicators on the inside haven't been triggered, so it's not water damage.
HenriWW said:
I have tried replacing the USB and it hasn't fixed it at all, and at no point has this one been submerged. I learned not to do that with the one that had to be replaced on warranty :/
Also all of the moisture indicators on the inside haven't been triggered, so it's not water damage.
Click to expand...
Click to collapse
Just to be clear, you have replaced the usb port and not the usb cable, right? Have you tried letting a Samsung rep look at it? I know that the warranty can't be claimed but you could ask them to just check on it. Ask for an approximate price to fix it, canvass other repair stores and search for the parts needed so you can do it yourself if you want.
VIPNobie said:
Just to be clear, you have replaced the usb port and not the usb cable, right? Have you tried letting a Samsung rep look at it? I know that the warranty can't be claimed but you could ask them to just check on it. Ask for an approximate price to fix it, canvass other repair stores and search for the parts needed so you can do it yourself if you want.
Click to expand...
Click to collapse
Yeah I replaced the flex ribbon inside the phone itself. I was trying to get it sent into Samsung, but my Cyber Service Centre account stopped accepting my password and wouldn't accept any reset passwords, and Samsung stopped responding to my emails :/
I also emailed a British Samsung repair shop and they told me that they wouldn't look at it because it wasn't bought within the EU.
HenriWW said:
Yeah I replaced the flex ribbon inside the phone itself. I was trying to get it sent into Samsung, but my Cyber Service Centre account stopped accepting my password and wouldn't accept any reset passwords, and Samsung stopped responding to my emails :/
I also emailed a British Samsung repair shop and they told me that they wouldn't look at it because it wasn't bought within the EU.
Click to expand...
Click to collapse
That's unfortunate. I can't think of anything else aside from it being a motherboard issue. If it is, it will cost a lot. If you can, try going to other repair centers around your area; you might find one who can hopefully help you. Best of luck.
VIPNobie said:
That's unfortunate. I can't think of anything else aside from it being a motherboard issue. If it is, it will cost a lot. If you can, try going to other repair centers around your area; you might find one who can hopefully help you. Best of luck.
Click to expand...
Click to collapse
Thanks for trying to help anyways Nobie. I had the same thought that it must be the mobo, probably a surge fried it or something.