Database Develop

[Q] Modaco Custom Rom r4 - downclocking kernel 2.6.32.17

Hi guys! does someone managed to downclock 2.6.32.17 kernel?
I have Modaco Custom Rom r4 and setcpu 2.0.4 (support for HTC kernels 2.6.32.17) says perflock disabler works, but when I try to downclock my cpu, the frequency changes continuously between the minimum and maximium clock (it seems that perflock disabler did not work).
Any ideas?
Thank you in advance!

If speed goes bellow 245 MHz, then perflock disabler actually worked...
Sent from my HTC Legend

BlaY0, thanks for replying... anyway downclock does non works for me!
Does anyone who uses Modaco Custom Rom r4 can test if downclock works?

BlaY0 said:
If speed goes bellow 245 MHz, then perflock disabler actually worked...
Sent from my HTC Legend
Click to expand...
Click to collapse
w/o perfloc disabler and with regular kernel it wont go under 480mhz.
maybe you are using live wallpapers or something like that.

were2 said:
w/o perfloc disabler and with regular kernel it wont go under 480mhz.
maybe you are using live wallpapers or something like that.
Click to expand...
Click to collapse
I am using regular kernel (2.6.32.17) and I read somewhere that using regular kernel I can't overclock but I should be able to downclok under 480mhz.
(I am not using live wallpaper or sonmething like that)

After U disable perflock, U have to set upper and lower limit on 1st tab. To see how many cycles your proc stays on every frequency available, check info tab...
Sent from my HTC Legend

Without using phone:
Time in state
128000 13227
245760 94789
480000 136737
600000 139756

[Q] Milestone Froyo 2.2.1 stuck on 550MHz and can not be overclocked

Hi All,
I have a rooted Milestone with Middle East stock ROM running FROYO 2.2.1... I want to overclock the beast.
whenever i run the milestone overclock and choose a different frequecy than 550MHz (I tried various combinations of frequencies and Vsels) and i hit apply, it always reboots and does not work..... am i doing something wrong?
Do i need to use any other app? setCPU and other apps also have a max of 550MHz.
Hady

I have Central Europe GOT 2.2.1 and also had similar problems. I rooted my phone again, using Androidiani, and then reinstalled Milestone Overclock, it helped.

What is androidiani? I rooted using Super one Click. Which version of Milestone Overclock are you using?

hadyhosny said:
Hi All,
I have a rooted Milestone with Middle East stock ROM running FROYO 2.2.1... I want to overclock the beast.
whenever i run the milestone overclock and choose a different frequecy than 550MHz (I tried various combinations of frequencies and Vsels) and i hit apply, it always reboots and does not work..... am i doing something wrong?
Do i need to use any other app? setCPU and other apps also have a max of 550MHz.
Hady
Click to expand...
Click to collapse
Which 2.2.1 stock are you running? There is no official 2.2.1 released as yet. You can overclock using Androidiani OR which is available here.
IF you using the latest leak ( APAC ), Milestone overclock doesn't work.

system/bin/mot_boot_mode
longpress "Open in Text Editor"
Code:
#
insmod /data/data/pt.com.darksun.milestoneoverclock/files/overclock.ko
echo 68 > /proc/overclock/max_vsel
echo 800000 > /proc/overclock/max_rate
change the vsel and maxrate to these terms

my solution
hello all
unistall or update milestone overclock failed on my devices setup after a few trys i found another solution
i run my xt-720 with dexter`s milestone2.2.1 xt720 remake v1.3 bugfixv3 and till yet found no more bugs without milestone overclock
if you type milestone overclock in market search there are 6 apps,cpu master (free) is one of them with this i fixed my problem that the cpu is set on 550 mhz at startup!
Just download it!
Open the old milestone overclock set cpu on what you want (i did 1ghz).
After this open cpu master (free) set my cpu min 1ghz max 1ghz,hook in set on boot box and tada after startup it sets cpu to 1ghz
,for more battery life take a lower number a the min value
precaution hook in set on boot in milestone overclock,dont know if its relevant XD
mfg jens
ps:hope this can help some people and sry for my bad english

[KERNEL] R3 - OC 1500mhz/EXT4/CIFS/GPU OC from stock LG kernel (2.6.32.9)

Hi guys!
This kernel is for stock/MCR ROMs only. I've tried to combine all the best bits from existing kernels into this one. This is based on the stock LG kernel.
First of all special thanks to Benee/Cpujuste since a lot the changes are from their kernels.
Features of the kernel:
* OC to 1500 mhz (minimum is 500 mhz but if you don't change it 300 mhz will work)
* GPU/AVP/VDE have been overclocked
* noop I/O scheduler
* Disabled all LG debugging messages
* 64 mb hack
* EXT4/CIFS built into the kernel
Few other misc changes to the kernel config. This is my first kernel so take it easy on me
Download:
[Release 1]
http://www.mediafire.com/?9g08udzg0d21fmj
[Release 2]
http://www.mediafire.com/?szkweyakk691wx2
[Release 3]
http://www.mediafire.com/?7z7rcw6x136pcaj

Release 3
=======
- Fixed wifi thering
- Updated voltages/speeds a little bit so there aren't any > 100mv jumps as before
- Added multicast support
Release 2
=======
- Reduced AVP/VDE clock speeds
- Changed voltage/cpu tables to:
389 mhz ]
503 mhz ]
655 mhz ] Stock LG voltages/speeds
760 mhz ]
1015 mhz ]
1216 mhz - ] For overclocking
1408 mhz - ] Default voltages are higher
1504 mhz - ]
Release 1
=======
- Initial Release

testing, hope you can release source code someday
info :
testing with FR18, stuck at LG logo...

do i need to make a wipe or wil this do it for me?

smokeweedevery said:
do i need to make a wipe or wil this do it for me?
Click to expand...
Click to collapse
no need to wipe when installing new kernel ...

ok thank

applied at FR18b2, booting ok, did some testing now :
1.) very positive (for me at least) : LG Gallery works fine with this RAM hack kernel !(zooming ok without black bar !)
2.) LG videoplayer plays 1080p fine !
3.) videorecording with camera mod works fine @ highest settings
4.) quadrant @ 1000mhz : 3218, quadrant @ 1500mhz : 4761
5.) Linpack @ 1000mhz : 36.418, Linpack @ 1500mhz : 54.793
overall : phone seems very snappy even @ 1000mhz, vibration o.k.,
If it´s stable the next 10hrs, i think i will stay with this one, thx !
--------------------------------------------
bugs i found yet :
bootanimation is interrupted when starting 2.nd or 3.rd time (not a big problem)
O2X reboot is not working (reboot & reboot recovery) , or is it because of new CWM recovery 4.0.0.2. ?
tethering not working (tried wifi)

somebody tested the tethereing options with this kernel?

75markus said:
applied at FR18b2, booting ok, did some testing now :
1.) very positive (for me at least) : LG Gallery works fine with this RAM hack kernel !(zooming ok without black bar !)
2.) LG videoplayer plays 1080p fine !
2.) quadrant @ 1000mhz : 3218, quadrant @ 1500mhz : 4761
3.) Linpack @ 1000mhz : 36.418, Linpack @ 1500mhz : 54.793
overall : phone seems very snappy even @ 1000mhz, vibration o.k., couldn´t find any bug yet...
If it´s stable the next 10hrs, i think i will stay with this one, thx !
Click to expand...
Click to collapse
wow, it seems it doesn't work with my FR18b2, may i know what do you set in your FR18b2 kernel? do you use default kernel?

will this work on stock?

fajarep said:
wow, it seems it doesn't work with my FR18b2, may i know what do you set in your FR18b2 kernel? do you use default kernel?
Click to expand...
Click to collapse
i used MCK kernel r14 without RAM hack before ...

smokeweedevery said:
will this work on stock?
Click to expand...
Click to collapse
This kernel is for stock/MCR ROMs only.
Click to expand...
Click to collapse
i guess so?

peewster said:
somebody tested the tethereing options with this kernel?
Click to expand...
Click to collapse
couldn´t get wifi tethering to work ...
notebook connected to phone, but no internet connection ...

Hiya... just wonder how do i back up the original kernal in case anything goes wrong??? I do wanna try this out on my stock ROM too...

75markus said:
couldn´t get wifi tethering to work ...
notebook connected to phone, but no internet connection ...
Click to expand...
Click to collapse
All the froyo kernels with ramhack and oc have tethering issues, so it seems....
Sent from my Optimus 2X using XDA App

Kenchitech said:
Hiya... just wonder how do i back up the original kernal in case anything goes wrong??? I do wanna try this out on my stock ROM too...
Click to expand...
Click to collapse
just do a nandroid backup first, when you choose advanced restore, you can only restore kernel if you want, but i would advise you to make full restore if you need to, cause one module (wireless.ko) seems also different ...

not working on stock rom. cant boot

just had some freeze when playing aroung with pimpmycpu, selecting different scheduler & undervolting,next reboot ended in bootloop -> reverted to MCK r14 ...
seems to be more stable at the moment ...

same here
smokeweedevery said:
not working on stock rom. cant boot
Click to expand...
Click to collapse
same here. freeze at LG logo.

smokeweedevery said:
not working on stock rom. cant boot
Click to expand...
Click to collapse
Clean dalvik cache?

getting hangs while overclocked?

I tried overclocking my phone with galaxian and semaphore kernels. I overclocked my phome to 1.2ghz and tried other frequency not lower than than 1ghz but I keep on getting hangs when waking up the phone to unlock and sometimes while using the phone. how do I fix thix problem? I'm on darkys rom 10.2 extreme edition.
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2

Galaxian is on 1.2 ghz on default only then how did you overclocked it ! Try semaphore kernel its better, believe me i have used galaxian for 2 weeks on jetpack rom and got bit of lags and quadrant score near 2600 only while on semaphore I get 3000 on 1.2ghz after overclocking using tegrak overclock app.
Sent from my sgs
kernel: galaxian
Rom: jetpack

i used both tegrak and set CPU apps to overclock it. when i used the tegrak, i clicked on the load module then clicked on CPU max frequency, chose the 1.2ghz, then says watching stability the the watcher stopped working or the countdown stops at 298. chose another frequency it did the same. i tried it until the countdown works, and it works but i get hangs sometimes. would you be good enough to give me all info to overclock it manually in the optimize menu in the tegrak app?? thanks

anyone have fix for this?

yes, clean your phone and install Tornado.

I was using tegrak. But my suggestion is dont use oc. Bcs OC is always risk and we are not getting any performance increase except the benchmark score.

First try wiping cache/dalvik cache and use Ultimate Kernel Cleaning Script - 2.0 via CWM. If that doesnt improve the lags better do a full install via odin. Its better than a factory reset co's u will lose all ue data any way. Pls do back up all of ur apps and personal data. Try using mybackup root or titanium backup from market.

i think you should overvoltage on 1200mhz
you can use tegark overclock ultimate or voltage control ultimate

[Q] My X8 keep rebooting after OC help

Hi need help i always cannot oc my x8. I am using alfs kernel + GDX and it'll freeze and reboot if i set to 748mhz or higher.
Today i tried to use Gingercruzt + nAa kernel I also cannot oc too. Anyone experience this problem??? Help

Phone reboots after OC
Hello am currently using MiniCm7 2.1.6 + nAa kernel 08b using governor interactive min 122Mhz and Max 729Mhz and enabled the set on boot and runs very smooth it only takes 44 secs to fully boot with many apps intalled that are required to start on boot as far as i`ve been using it i had no issues, with preloaded settings min 122Mhz and Max 600Mhz i got a score of 1764 running nice and neet no concerns
Thanks to the great effort of nobodyAtall and DaRk dOg
say thanks if this helped you...
Sent from E15i
__________________
MiniCM7 2.1.6+nAa-08B kernel
I like to keep it simple
8GB Class 10 MicroSDHC

Every phone is different, If a x8 is stable at 748 mhz it is not necessary that other one should..
Mine also not stable at 748 mhz so if your phone is not stable try lower frequency..

Thanks a lot for the info My X8 still reboots if i set to 748Mhz so i only can use 729Mhz