Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
jjmorris100 said:
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
Click to expand...
Click to collapse
install this official rom from HTC
http://rapidshare.com/files/66085556/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.exe
Its for RUS QTEK_AO7.
Then you will have SPL 1.10
I have similar problem
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
hi, can any1 send me a link for a ger version of wm6.0pro ?
Wigo said:
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
Click to expand...
Click to collapse
I'm not sure that I understand well, but if you flash from SD, it finish in 100% and than go to three color boot screen? ....
Hi alebo caf Vašek ;-)
My problem is that always stuck on boot image HTC or Windows Mobile blue screen. I can´t use way copy necesseary files to root of phone memmory and than run sspl etc...I have to turn manualy to three-color mode, than connect USB cable and run upgrade utility but still froze instalation on 2%, If I use SD card methode with BREEIMG file uploading doesn´t start....
p.s.: Ak by si mal dáku radu tak možno lepšie vysvetliť po česky ;-). Moje ICQ 208-393-971
Dík
CZ Rom
I would like to install new ROM into my Mteor, but I have no experience doing it. I do not know which version to try, all I need is to be able to enter czech letters on HW keyboard as with original ROM. Any sugestion? I preffer personal answer in czech language ([email protected])
I have upgraded my phone to wm 6.5, the phone used to finish boot up completely. Now all it does is go to the green windows screen and then go dark. I have tried a hard reset and I would like to flash another rom into it but my computer will not see the phone in this state.
maybe you just have to wait, it takes a while to complete first boot..
I know the first boot can take awhile, but I am pretty sure 2 weeks is to long LOL
does anyone have an idea how to unbrick the phone
try to install a new rom
first try with 6.1 normal version , and if it does not help , try to install 6.0
Hi all...
i tried booting my topaz to android using this guide:
http://forum.xda-developers.com/showpost.php?p=6132485&postcount=1537
and this thread:
http://forum.xda-developers.com/showthread.php?t=641021
when i load the haret.exe my phone display only half of the screen and freezes.
i tried also booting to ubunu using this thread:
http://forum.xda-developers.com/showthread.php?t=640785
but the phone freezes while in the black boot screen with linux pinguin on top.
after reading i found that TOPA100 model of the Topaz can't boot to any linux based system.
is this true?
did someone managed to boot?
thank you...
hey, i did manage to boot the rhodium android package. havent messed with it at all but you might try starting with that setup.
used project android 2.1 sense. changed startup txt
when i flash cm 10 it shows an cm animation after boot it shows android upgrading
and again it begins from first cm animation and its android upgrading and again
please help me friends
sorry for my bad english
You need an ext-partition on your SD card for CM9/10.
Do you have one?
hi guys
i tried to install android on my xperia x1 but some thing went wrong
now when i start my mobile a black screen appear with a blue writing (i think this is fastboot)
I tried to boot a boot.img and now a second black screen with white writing appears (I think this is adb)
when i try to hspl my device (power and volume down) it says (spl 0.72.0000)
I cant go back for a wm rom nor install android rom
I tried many wm rom but nothing is working
i don't know what to do!!!!!!!!!!!!!!!!????
please help guys
I tried to install android following this http://forum.xda-developers.com/showthread.php?t=1329379
first I tried to do hspl 0.78 .... I did it and it was a success
but I couldn't complete everything and android won't run on my mobile
when i power it on a black screen with blue writing appears at first
then i tried to boot an img using fast boot and a new black screen with white writing appears but nothing else
then I give up and I want to get WM back
I tried to go back to the stack spl 0.72 and it was ok but my phone won't run WM it keeps show a black screen with withe writing and stop
when I try to enter boot loader and flash a new rom using sd card (formatting my SD with fat32 and put a rom named kovsimg.nbh on it) it stuck on loading and nothing else
and even when i try to flash a new room using KovskyAdvancedRUU it stop at 0% and won't continue
now i don't have any OS not WM and not Android
I even can't change to hspl like 0.78 or 0.52
thats all I did
I hope you can help me
finally
android worked
when the black screen with white writing appears I connected the phone to the pc and run (adb shell)
and it worked >>>>>>>
thank you very much
but I don't know if I can go back to WM saftly