Database Develop

Black screen, vibrating in a pattern

Hey guys and gals,
I think I bricked my phone and I'm assuming that it's the internal sd card that failed... My phone boots through the i9000m boot screen and does the S loading screen but then turns black and the phone starts to vibrate in a pattern. I do have download mode and have flashed using Odin (Re-Partition, 512 pit) with stock JK3 firmware.
The phone was acting up last night with some force closes and running slower than usual, and today I was opening settings and it would go to a black screen with no response, so I restarted and this is where I'm at. I was using Doc's Bell v1.1 Rom.
Should I try flashing Odin again?
Update: I tried flashing stock JK3 again and made it to system recovery (3e)
Below the options of:
Reboot
apply sdcard:update.zip
wipe... blah blah
-------------------------
]update media, please wait
E: Can't mount /dev/black/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet. please use UI me nu for format and reboot actions.
copy default media content failed

You need to flash with 803pit. N the vibrating patter is the force close pattern. Flash eith 803 n u shud be good
Sent from my GT-I9000 using XDA App

That did not work for me btw Im tried flashing with I9000XXJPY|2.2.1|2010 December|
From here: http://forum.xda-developers.com/showthread.php?t=846913
Initially I did it without the PIT file, searched for a thread regarding the same issue as the original posted to find this thread with the solution you mentioned however same problem.

Hi, you need to flash back to JM8, to restore your dbdata partition. Then flash to any other rom.
Cheers

Same for me
Hi,
Times ago I flash with odin but I forgot to remove RyanZA's OCLF before flashing,
symptomes: system start with "S" logo samsung and after a while screen goes dark
and intermitent vibrate.
Solution was:
- go to recovery mode
- wipe data/factory reset
- wipe cache partition
(I don't remember if only 1 is enough)
Hope it help,
Laurent.

[Q] Can't mount /dev/block/st19

My problem is really complicated. Things first: My phone didn't work for the last 3 months properly. I mean it booted and everything worked, but I could only update 3-6 apps and then I had a kind of lock (apps downloading, but no more installing). The solution for that was to go to CWM recovery and to clean cache, fix permissions and reboot. Now I could update the next apps until it locked again. Today I was really upset with that and tried some different things. I can go to download mode and CWM recovery (2.5.1.3) is still there but phone doesn't boot anymore. I can flash other firmwares with heimdall (using only linux) without errors, but the phone doesn't boot (stuck before the big S should come). If I go on CWM mount and storage I can't mount /system and /data, think thats my biggest problem right now. Is there any possibility to delete the whole SD card? I mean everything? Already tried flashing XWJS5 with repartition ticked, but it doesn't change anything. Tried now also to flash an old 2.1 firmware, no difference. Any idea how I can fix that problem (adb recognize the device)? Can't go to samsung centre because CWM is the recovery and they will know I rooted the phone...
Comprehension: Can flash other firmware with heimdall without errors, but the phone won't boot further then Galaxy S GT-I9000. The big S logo doesn't appear. In recovery can't mount /system and /sdcard
I tried already so many things, so I'm very happy for any advice!

Try flashing an older stock rom like jpy or js3 or your official rom, with repartition. As far as i know js5 rom is not a full package as jpy or js3 which also have the bootloaders. Those roms should also restore default recovery.
Sent from my GT-I9000 using Tapatalk

Reflash FULL firmware
*EDIT- rechecked the error code*
I'm pretty sure "can't mount /dev/block/mmcblk0" error = Bad SD Card
try to flash it back to stock so you get the I9000M splash and bring it back for service.
you can try, just make sure it's stock firmware:
flash a full firmware (pda/csc/phone/pit w/repartion), it might recognize the drive after re-boot.
good luck

flashed to JS3. updating now. Gonna see if it works again or if the installation bug is still there... Thanks for helping lilraindon
EDIT: Back on darky again. Problem is that my error still exist. Sometimes you can't update or install any new apps, needs to go to recovery and to wipe cache and fix permissions... Pretty annoying. Bought the phone in Germany and I'm now in Vienna Austria for studies. Do I need the warranty and bill (both in germany) or will they take it to repair without any of them? Can I sell this phone on ebay and buy from the money a Nexus S2?........ last one just kidding, just pretty annoyed my sd card is somehow broken. Any possibility (like an sgs tools script) to wipe cache, fix permissions and mount /data with phone on? With that I could live...

[Q] "Unavailable" SD card?

I was out today, minding my own business.
In the middle, my phone just shut off. Restarting it, it would not boot past the kernel boot screen, not even into CWM. When I got home, I oneclicked it to stock in an attempt to return to my nandroid CM7 from right before the full-9 package was released. I encountered an issue.
CWM3 said "Error: Can't mount /sdcard". Booted the phone up in JF6, and the storage menu shows both my External and internals reading with total and available space as "Unavailable", and both the mount and format options on both are greyed out. Internal phone storage is normal, however, and reads 1.73GB.
Don't ask me to flash Froyo or something. Standard 2e recovery does not allow me to use a ROM Manager flashable CWM2, thus I cannot flash Froyo or CM7's package. CM7's initial kernel returns the "Can't mount /sdcard" error, so that's also inadequate.
So, anyone have any idea what I'm dealing with here? How would I be able to go about fixing it? If it helps, my IMEI number and all that jazz is still present.
EDIT: I just realised a perplexing quality. The phone will ONLY boot with an external SD in it... Doesn't matter if I remove it after, it just needs an external in it to boot. Once the phone boots, it's dead weight. Funny, as I always flash without it in there...
EDIT2: Found some info from Supercurio on the Bell Vibrant while searching, I wonder if this is relevant...
supercurio said:
On #project-voodoo IRC I helped a user who had issues with his SDcard on a Bell I9000M
Turns out that his internal SD MoviNAND chip was dead!
The system automatically used his external SD as a backup for /data, as the "mmcblk1" device become "mmcblk0".
The internal SD was so dead that the Linux Kernel didn't detected any existence of it anymore.
The symptom that the phone was working (using the external SD) but he couldn't mount his SD card anywhere.
Eventually he had a replacement from Bell in a few days.
What killed the sdcard ? An old Ext2 lagfix when creating the giant 1GB+ loop files.
But it wasn't the lagfix fault. It just acted as accelerator.
Click to expand...
Click to collapse
But I've never used that lagfix. I've been on Speedmod then CM7 the entire time.

Maybe flash a kernel with CWM in it, such as speedmod with Odin though I'm clueless as to what happened to your phone. I guess do this, flash a new ROM go from there... Sorry this is my only idea.

emcnelly said:
Maybe flash a kernel with CWM in it, such as speedmod with Odin though I'm clueless as to what happened to your phone. I guess do this, flash a new ROM go from there... Sorry this is my only idea.
Click to expand...
Click to collapse
Already said, CWM returns "Can't mount /sdcard" in CM7's CWM3 from the initial kernel... I can't flash Froyo, so Speedmod is out of the question.

Thread moved.

I'd try flashing a full odin stock rom and a .pit with it with repartition checked. I heard someone else with this sort of problem, he used odin one click but still got the same thing, flashed stock gb with a .pit and it worked.

studacris said:
I'd try flashing a full odin stock rom and a .pit with it with repartition checked. I heard someone else with this sort of problem, he used odin one click but still got the same thing, flashed stock gb with a .pit and it worked.
Click to expand...
Click to collapse
Did not work; tried flashing JH7, KB1 and JF6, all 3 do not boot past the kernel screen. Only OCD JF6 gets the phone in a working way. I found some other threads, but it's looking worse and worse by the second.
ATT is probably getting a call tomorrow...

Same happened to me, I managed to get JI6 working somewhat. Flash the one click ODIN JI6, wait till bootanimation ends, ROM will not boot up completely so go back into download mode, then flashed speedmod with three button ODIN, let boot up complete then go into recovery and delete user data, wipe cache and dalvik cache.
Still don't have an mnt/sdcard but at least I can make a phone call.
Also, I lost data connection so I had to manually enter APN in settings, wireless and networks, mobile networks, Access point names and create a new APN, I just googled AT&T APN for the values.
Hope it works out as I'm probably going to contact AT&T as well.

I had that happen kinda with "cognadian bacon" it fried my sd card and I flashed odin one click then master cleared in odin. After that I booted up and got my format option back ..... If that doesn't work you could probably hook it to computer (windows) and go under device management and format from there but don't know if will support fat32.. Just a suggestion though.... That what I did for my external sd when it wouldn't recognize it
Sent from my GT-I9000 using XDA Premium App

Need help with SGS Looping Issues

Essentially I am at a lost of what to do.
I have tried everything to no prevail which leads to me to my defeat post here for a cry for help.
I DO NOT believe I have bricked it yet because I can still get into download mode and CVM but it doesn't look like this image: http://blog.laptopmag.com/wpress/wp.../Clockwork-Mod-Boot-Screen-e1279545586372.jpg
which is what I wanted. My original plan was to install a new ROM however, I do not have that option "install zip from sdcard". Therefore I had to install the Speedmod Kernel which is why
ANYWAYS moving on, I have tried Heimdall and Odin. I have been able to bootup the phone. HOWEVER it doesn't load a ROM because the Samsung Galaxy GT i9000 logo just keeps looping. Like I said, I am able to get into Download mode and CVM with the new menu. However, when I click anything the screen goes blank and nothing happens. I am at a complete loss of what to do. I have tried everything and I'm looking to advice.
Thanks and hope to hear from you all.

If I remember correctly the Speedmod Kernel uses the power button to select options and if you click the home button the screen will go black.
If this is not the issue then reverting to a stock Rom is probably your best option.
Find a stock Rom at: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa (this link is for international version) just select your country. from the links just above Firmwares for GT-I9000 .
From here you want to get a pit 512 & make sure you have a firmware with 3 files (PDA, Phone, CSC) . From here there are plenty tutorials on how to install a stock ROM.
If your issue is not pressing the wrong button in speedmod let me know and I'll be happy to provide a basic list of what to do... or provide a link.

Thanks for the quick reply, I have done that. I have installed the best one I could find: I9000XXJVQ
I put the following 4 files in Odin:
s1_odin_20100512 (PIT)
CODE (PDA)
CSC (CSC)
MODEM (PHONE)
It brings me to Android system recover <3e>. From there I'm at a lost at what to do. I see when it says
Code:
Copying media file
E:failed to mount. /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard you storage not prepared yet. please use UI menu for format and reboot actions.
Media files copy failed.
# MANUAL MODE #
Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/BMC/system/'.
Successfully applied multi-CSC.
From there I do not know what to do. When I click reboot system now; nothing occurs, the SGS image at the beginning still continues to loop. I'm looking at how to install the CVM so I can install my custom ROM.
I believe in the past I managed to do it (I installed the Dark Knight mod; but when it booted it said Encryption Unsuccessful and it only happened once. Was never able to get past that screen).
Anyways, that's the instruction from what I did above. What next (It's still looping at the SGS text at the startup).
EDIT:
From this post: http://forum.xda-developers.com/showpost.php?p=9336821&postcount=2
I then followed the install instructions for Root XXJVQ
The thing installed, it still has the issues. Opens the SGS start screen and doesn't go anywhere.
Further EDIT:
I then restarted the phone with following combination. (Power + Vol Up + Home). It then launched in CVM. I cleared partition and cache. I then installed the .zip ROM file (http://forum.xda-developers.com/showthread.php?t=1510940&highlight=cyanogen) from SD card. Rebooted system. It launches. Says "Encryption Unsuccessful" Please restart phone. I click the restart phone button. It restarts, I then get the android looking icon dead on the ground with it's chest open with a "Red triangle !" above it. Stuck from here.

Wish I could help further. In my experience I had to flash stock twice. Once with with pit file and repartition selected. Once without pit file and repartition unchecked.
From there to flash a custom ROM you need to get rid of 3e recovery by flashing something like CF-roof. Then once you have cf-root you can instal custom ROM.
Here is link for cf-root
http://forum.xda-developers.com/showthread.php?p=8238938
Sent from my GT-P7500 using xda premium

I did the above. It boots into CVM. I install the custom ROM. It counts down Waiting for SD Card to mount (20s, 19s, 18s....). Then it just restarts and keeps looping like that. Suggestions?

Unfortunately that is the end of what I know still fairly new to all this. Hourly someone else can help.
Sent from my GT-P7500 using xda premium

Dorianking said:
I did the above. It boots into CVM. I install the custom ROM. It counts down Waiting for SD Card to mount (20s, 19s, 18s....). Then it just restarts and keeps looping like that. Suggestions?
Click to expand...
Click to collapse
HOw long did it take for the ROM to install?
Have you tried removing the battery, battery back in recovery and reflash the ROM.
ICSSGS 4.2 has a requirement to be flashed twice. (different rom but may be similar issue)
Once to update the bootloader which will result in a boot loop when coming from a Gingerbread ROM and again to fully install the rom
Lastly download the ROM again checking the MD5 checksum before flashing
I trust that this will assist

Does it matter if it is installed from the External SD or Internal SD because when I try to install from the internal SD it says "Can't mount /emmc/" so I'm only able to install from the external SD.
I tried installing it twice. I still get the encryption unsuccessful screen. I also re-downloaded the ROM.

OK ii think what you need to do now is try to get the phone to boot successfully into a stock rom for your region.
You mentioned in the first 2 or 3 posts that you did download from SamFirmware a stock rom.
It is probably a Odin flashable ROM
Is it a 3 file or 1 file?
Flash and then boot up the phone to be able to use it.
If successfull move on to the next step.
If you have been able to do this before i would suggest to try a different ROM.
I can personally recomend the ICSSGS 4.2 ROM following the instructions on the opening post for that ROM
If this works then try Dark Knight or other ROM
If this post has helped please use the Thanks Button

Lexrsk said:
OK ii think what you need to do now is try to get the phone to boot successfully into a stock rom for your region.
You mentioned in the first 2 or 3 posts that you did download from SamFirmware a stock rom.
It is probably a Odin flashable ROM
Is it a 3 file or 1 file?
Flash and then boot up the phone to be able to use it.
If successfull move on to the next step.
Click to expand...
Click to collapse
Unfortunately, it does not boot into stock ROM. It just loops.
I tried to do it over again. I used a different firmware: I9000XXJVU_I9000OXAJVU_OXA
So let's begin by retracing everything I did.
1) I essentially did this: http://www.androidegis.com/how-to/learn-how-to-install-xxjvu-firmware-on-galaxy-s-i9000/ (so it had the 4 files: pit, PDA, Code & CSC)
2) After I did that, I went into Odin and Put this as PDA "CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS" and clicked start
3) It then loaded but it keep looping. I had a feeling it didn't have a ROM installed. I erased data, cache and etc. Then I installed the Dark Knight 3 ROM. Install by external SD because I couldn't get the internal SD to work "Can't mount /emmc/" error.
4) I then reboot. I get the ROM loading screen. Then boom, stuck on Encryption Unsuccessful.
5) I put it back in recovery mode and repeat step 3 again.
6) I get the encryption error again.
Pretty much stuck at there.

so what you are saying is that no matter what firmware you flash it will boot loop?
I personally would not be trying a ICS ROM until you can boot a gingerbread rom successfully.
I have personally softbricked my phone once where i then was able to get into 3BR but was unable to boot due to a bad flash reflashing a gingerbread rom a couple of times with odin worked for me.
Try reflashing your JVU rom 2 times in a row.
I assume that you are able to get into 3BR if so what happens if you try to mount /system is there a error message?
When the phone is boot looping what is displayed on the screen?

Dorianking said:
Unfortunately, it does not boot into stock ROM. It just loops.
I tried to do it over again. I used a different firmware: I9000XXJVU_I9000OXAJVU_OXA
So let's begin by retracing everything I did.
1) I essentially did this: http://www.androidegis.com/how-to/learn-how-to-install-xxjvu-firmware-on-galaxy-s-i9000/ (so it had the 4 files: pit, PDA, Code & CSC)
2) After I did that, I went into Odin and Put this as PDA "CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS" and clicked start
3) It then loaded but it keep looping. I had a feeling it didn't have a ROM installed. I erased data, cache and etc. Then I installed the Dark Knight 3 ROM. Install by external SD because I couldn't get the internal SD to work "Can't mount /emmc/" error.
4) I then reboot. I get the ROM loading screen. Then boom, stuck on Encryption Unsuccessful.
5) I put it back in recovery mode and repeat step 3 again.
6) I get the encryption error again.
Pretty much stuck at there.
Click to expand...
Click to collapse
from what you are doing it seems like you aren't doing what we say. Sorry if this is not the case.
1. Follow steps from your link above.
2. Attempt to reboot. Most likely you will be stuck in boot.
3. Flash again steps as link above. This time do not use pit and make sure repartition is unchecked.
4. Now boot. This time you should boot into stock.
5. Once in stock set USB debugging on and connect phone to PC and copy ROM you want to flash to internal sd card .
6. Flash CF-root with Odin.
8. Restart phone in to recovery and flash ROM on sd card.
Sorry to repeat this but none of what you say mentions flashing stock twice once with and once without repartition checked. You need to do this right after each other.
Sent from my GT-P7500 using xda premium

So your suggestion is to keep doing JVU flashing until I can get it to work? Do I just follow that instruction and do the flash once with the PIT file (and repartition) and do it again without the PIT file? If it still doesn't boot, what then?
The phone boot looping. RIGHT when you turn on the phone. It has that Samsung Galaxy I9000 screen. It just has that, goes black for like 2-3 seconds then resets itself over and over again.
There is no issue with mount /system. I believe when I try to mount /emmc, there is an error. This is important because this is what lets me access the internal SD.

scubadude said:
from what you are doing it seems like you aren't doing what we say. Sorry if this is not the case.
1. Follow steps from your link above.
2. Attempt to reboot. Most likely you will be stuck in boot.
3. Flash again steps as link above. This time do not use pit and make sure repartition is unchecked.
4. Now boot. This time you should boot into stock.
5. Once in stock set USB debugging on and connect phone to PC and copy ROM you want to flash to internal sd card .
6. Flash CF-root with Odin.
8. Restart phone in to recovery and flash ROM on sd card.
Sorry to repeat this but none of what you say mentions flashing stock twice once with and once without repartition checked. You need to do this right after each other.
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
After step number 1, I get this in the Android system recover <3e>
Code:
Copying media file
E:failed to mount. /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard you storage not prepared yet. please use UI menu for format and reboot actions.
Media files copy failed.
# MANUAL MODE #
Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/BMC/system/'.
Successfully applied multi-CSC.
I proceed to step 2. It doesn't boot so I do the 3BR.
I do step number 3, but step number 4 doesn't happen; I tried what you just said and it won't boot into the stock. It just goes into Android system recovery <3e> and the copying media files fails (both times I flash it). Just an error, still can reboot system and etc but I don't think anything happens.
This error on the second flash is
Code:
E:failed to mount /sdcard (file exists)
E: copy_dbdata_media: Can't mount /sdcard your storage not prepared yet. Please use UI menu for format and reboot actions.
Media files copy failed
#MANUAL MODE#
-- Applying Mutli-CSC...
Installing Multi-CSC
Can't acces to '/system/csc/BMC/system/'
Successfully applied multi-CSC.
Click Reboot Now is <3e>. Nothing happens, it boots up. Shows the first Samsung Galaxy S screen, does nothing. About to boot stock ROM but doesn't. Loops it back to the SGS screen once more. Then it just shuts off and a picture of a battery shows up?

If you are flashing through Odin twice all three files 1st time with pit and repartition checked, second time without pit and repartition unchecked and still have issues then I would say problem may be with phone but I am new to this myself. Only commenting and given suggestions as I had similar issues which I resolved with steps I mentioned.
Options would be to download another stock ROM and do a checksum to ensure it is fine, download a different version of Odin (i use odin 1.85) and a new 512 pit file, reinstall the drivers for the phone, try it all on a different PC. Also make sure kies is not running when you do this (kill any background services.for kies) and try disable your antivirus on your PC. Also remove external as card and Sim.
If these suggestions don't help try search google for those errors you are getting. That's what I have done and managed to sort every issue so far.
Sent from my GT-P7500 using xda premium

Ok lots of reading in past posts here's what I would do and it works everytime. Google links to xxjvu firmware and and use those three files plus pit 512 repartition checkedand flash. Then to root your phone simply go to darky website. But before you do any of that tell me what rom you were on before you flashed new kernel and what exactly were you trying to accomplish out of your phone. ie.end result and who your service provider is. If you pm me I can walk you through it no problem.
Sent from my GT-I9000 using Tapatalk

It was 2.3.3 I believe before I did it.
My goal is to put a nice custom ROM (looking towards Dark Knight 3).
I have no idea what the specific darky rom I need.
Service provider was Virgin Canada.

Been thinking. Have you tried using heimdal. Try search for a tutorial that flashes a stock ROM with heimdal.
Sent from my GT-P7500 using xda premium

What did you have before the problems? Was it a lagfixed rom with ext4 partitions?
I've had strange problems when I tried to flash stuff with a lagfix, try to flash your stock base, and then flash a kernel that supports ext4. See if it boots up. If it does, disable lagfix and then change to whatever you want

[Q] failed to mount /sdcard error

hi guys
this is my first post on this kickass site and i hope that someone can help me with this rather strange error :victory:
as the subject of topic says , i get this error whenever i boot my friends sgs into recovery as normal booting goes on loop forever.
this is the error i get in the recovery of stock I9000XXJVU:
----------------------------------------------------------------------------------------
--Copying media files...
E:failed to mount /sdcard (file exists)
E:copy_dbdata_media:can't mount /sdcard
your storage not prepared yet,please use UI menu for format and reboot actions
media files copy failed
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/TRA/system/'.
Successfully applied multi-CSC
----------------------------------------------------------------------------------------
what happened is this:
my friend had a sgs and i wanted to flash it with cyanogenmod 10 (android 4.1)
the stock firmware was 2.2 iirc.
i just rooted the stock and flashed the 4.1
it went ok but i saw the mounting error back then sometime that i rebooted the device with 4.1 on it but didn't get that error all the time and it would boot just fine.
then the error popuped more and more.
so i decided to flash stock 2.3.6 ,rooting it and finaly go back to 4.1.
after i flashed the device using I9000XXJVU it goes on loop.
recovery and downloading mode works.but the recovery give me that error i said above.
i guess a hardware issue but i don't know for sure
i'm lost here :silly:
help me plz
Thanks in advance

Hi flash this http://db.tt/T8ZpfTPa in pda section in odin
Then see & follow my last post in this thread
http://forum.xda-developers.com/showthread.php?t=1993937

Donovan662 said:
Hi flash this http://db.tt/T8ZpfTPa in pda section in odin
Then see & follow my last post in this thread
http://forum.xda-developers.com/showthread.php?t=1993937
Click to expand...
Click to collapse
thanks for the reply.
i did what you said and its still in loop and same error in recover.
why my internal sdcard isn't mountable?can it be hardware failure?

Same errors?

Donovan662 said:
Same errors?
Click to expand...
Click to collapse
yep same error as before.
after flashing is done and it want to install the package,it get stock and give me that mounting error.
i just want to know if this problem is software or hardware

I also had this problem. Was on stock JVT with semaphore, partitions converted to ext4.
I decided to reboot my phone for no particular reason (was working reat) and when i powered it on kept boot looping without really getting past the samsung gt-i9000 white letters / black background screen.
CWM recovery said it was unable to mount any partition. External SD mounted fine, just nothing from the internel sd. No system, data, whatever. Got me thinking i may had my internal sd malfunctioning.
I just flashed it with odin and my stock branded operator rom (2.3.3) and done nothing more. No repartition. Working great. Was probably some ext4 error.
Before that i had been using cyanogen stable. Started giving FC like mad, so i flashed that stock JVT. On hindsight it may only had been the data partition that had run out of free space but i had no way of knowing when it happened and needed my phone running.
Reflashing got mine running again. Maybe try with Heimdall if odin's not working for you? Be sure to get a complete rom, with bootloaders and such. I'd suggest your operator's stock one. That way you can also send it back to samsung if it still doesn't work.
Click to expand...
Click to collapse
Found this post somewhere in the xda forum, it helped many people having the same problem as yours, hope it helps you !!!!

http://forum.xda-developers.com/showthread.php?t=1841250
See problem 11 exact same problem described

thanks for the help guys
i tried everything that came to my mine and used this topic for my errors but still get errors
problem 11 and 12 are the ones i get flashing different roms
even tried a Rescue kit from here but no go...
why this is happening to me?

the failed to mount as i have come to understand is internal SD card failure you will have to give external SD card a try
Check this thread
http://forum.xda-developers.com/showthread.php?t=2059098&page=2

file moved or deleted
hi friend, file link not working file moved or deleted........