I have an old Qtek 9090, and when I found here it could be upgraded I decided to give it a go. I'm runing windows 7.
I went to http://forum.xda-developers.com/showthread.php?t=630416
The links to the files were dead.
I have WM2003. Found repart_doc.exe and unlocker.cab, installed them in the temp folder of the 9090. ran unlock.cab. clicked on unhide.
when I click on unlock I get
error: fl_ioctl_bdtl_hw_protection - a device attached to the system is not funtioning.
I read here http://forum.xda-developers.com/showthread.php?t=412942 and tried again.
Same error.
Does ANYONE have an answer???
continuing on
I tried continuing regardless of my unlocking problem.
I dowenloaded a couple of files here...
http://forum.xda-developers.com/showthread.php?t=835761
the wm6.1 english and wm6.5, and the MAupgradeUt_noID
I moved to a clean windows xp machine without activesync.
when I started MAupgradeut_noID it refused to recognise any rom version to upgrade to.
Anyone in London England, or near Palm Springs CA, that can actually make these upgrades work?
BearUK said:
I tried continuing regardless of my unlocking problem.
I dowenloaded a couple of files here...
http://forum.xda-developers.com/showthread.php?t=835761
the wm6.1 english and wm6.5, and the MAupgradeUt_noID
I moved to a clean windows xp machine without activesync.
when I started MAupgradeut_noID it refused to recognise any rom version to upgrade to.
Anyone in London England, or near Palm Springs CA, that can actually make these upgrades work?
Click to expand...
Click to collapse
how can run your rom upgrades,if there is no activesync program that can connect your device with your PC..? you must download and install Microsoft ActiveSync on pc so you can run the upgrade process
Related
The final version of WMDC was posted today. See the link below as the Windows Mobile Device Center Page hasn't been updated yet.
http://www.theunwired.net/?itemid=3591
Or download directly
Download x86 Version Here
http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&DisplayLang=en
Download x64 Version Here
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&DisplayLang=en
Please reply if you have any success syncing the blue angel.
Can someone please upload it or provide alternative link. I cant seem to download it directly from microsoft. Thanks
firebird said:
Please reply if you have any success syncing the blue angel.
Click to expand...
Click to collapse
Hi, did download (the latest on MS website), install and use it without any trouble. It found my exchange setting on my BA and applied them without even asking me! This was last night, will see what happens today!
@ daddy_yankee1980: It is an upgrade to Vista with all the verification required, so even if it is uploaded you will have to be online and connected to MS website (I think).
it is "Microsoft Windows Mobile Device Center Driver for Windows Vista"
not the app
All the beta branding is gone from the application too - so I think its both driver and app.
Maybe you are right, i wont use vista just yet they have to fix a lot of bugs until i start to use it daily
here is links for both builds
x86
amd64
I'm currently using the Helmi AKU3.5 1.4Beta with no sucess to be detected, what rom are you using ?
Are you running the final version of the WMDC ?
Still problems with Vista
I installed the Windows Vista Mobile Device Driver Update Final, but my MDA Vario I is not connected. It is not recognized anyway. Any ideas how to solve this issue?
Thanks.
Markus
RUU
I am using Vista with final WMDC released driver with O2 Atom.
I am able to properly sync. No problems. However I am not able to update the ROM. It goes upto the sensing screen to display the current ROM on device and to be updated ROM info. etc. In the next screen it hangs and after some time of about 1 minute the device update utility says that it is not able to update the device. I even disable the firewall to check if it is issue with firewall. But nope no help. I again checked it with windows xp and active sync v. 4.2 where everything works perfect so no issues with O2 atom.
Any help is appreciated.
SX66 WM5 synched successfully
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
I'm still not able to sync in Vista with WMDC. My BA is saying:
Connection Not Valid: unable to open the connection '`USB'. This Connection is no longer valid or does not exist. Select a different connection and try again.
Click to expand...
Click to collapse
I'm going to try a hard reset on my BA and see if thats the problem.
brandonm said:
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
Click to expand...
Click to collapse
Since I just installed WM5 on my SX66, I was unaware that AciveSync does not backup WM5 devices. I purchased Spb Backup and that works better anyways.
It Works
When I plugged my device in today, the system was able to find drivers. All is good now.
Anyone got any problem when upgrading Rom on WIndows Vista and using the Windows Mobile Device Center instead of the traditional ActiveSync? It won't seems to connect to the device again once the device is restarted into the RGB screen [after the starting the Rom upgrade process]. After a few seconds, it got the connection error code on your PC. I soft reset the device and no upgrade has been installed. Any ideas?
I try removing the connect via USB check box and use Mtty to check the connections to my device. But after I have done that, the PC won't connect my device to my computer at all... hence, I can't get use Mtty to check the connections.
So I have no idea why this is happening on Vista. It works fine when I am using my old XP computer when I upgrade to the test ROM. Any suggestions will be appriciated. Thanks a lot of your help in advance.
Pete
http://www.modaco.com/Upgrading-to-Vista-Be-aware-RUUs-wonand39t-work-t251768.html
Looking to upgrade to Windows Vista? You might just want to keep an XP partition on your machine, as ROM upgrades via the normal RUU client do NOT work from within Vista, due to changes in the way the OS accesses the device. This also prevents IMEI-check unlocks from working on Vista.
Click to expand...
Click to collapse
Problem lies with vista, but I have read somewhere a solution is underway, or allready here...
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.
Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)
That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.
Im not a expert but is vista the problem??
Most likely.
Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....
Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??
Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try
diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!
Hi Guys,
I (did) have the kaiser working fine with WMDC, thanks to an update from MS. However, to get my old Hermes ready for Ebay, I followed the instructions in this thread:
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
(Which IS a great guide btw)
When I'd finished, I tried to get back to my Kaiser drivers, but just cant get it to work. I have though aboot removing the update, so I would get it again from MS, but it is not appearing in the remove updates dialogue in Vista. If someone could advise on where the update might be on my system, or link to the kaiser vista driver I would be grateful. I have tried re-installing both WMDC 6 and 6.1 with no joy.
Any help would be appreciated....
Cheers bods
Stoo1701
Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!
please add which rom you currently use, do you have activesync installed
Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !
Sorry !
Yes I have Activesync installed (for another palmsize divice).
What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.
Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.
night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.
Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.
you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync
Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.
For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5