I have lgt gt540 with quarx custom rom . Can someone tell me how can i automaticly over/underclock to save power or boost performance. I would like to be able to automaticly overclock to 800 mhz on 100% battery and underclock to 100 mhz when under 25% battery.
I've tried set cpu and cpu tuner . Both can't push the cpu further than 600mhz which is the stock maximum frequency
Related
Ok guys I have installed Zeus v7 ROM and you all know there is application called ZeusTweaker which allow me to change CPU frequency. So my question for you is: on which frequency did you set your max and min value, when did you set that frequency and are there any significant improvement that you noticed? Did you noticed any problems? And finally and most important.. is it worth it?
hi, frequency min 300 - max 1300 , undervolted -3, bench OB with antutu before overclock and after for see score.
if you don't play , maybe overclock is not necessary, battery eats more when OB is overclocked
Hi
My s5 default frequency CPU are 300 Min And 2400 max.
I have root. stock rom And kernel. I have Read about clocking And if i increase CPU sped in its Min values The CPU should be more reactive. (i have stock kernel for mantain knox To 0x0 And i don.'t need a overclock up 2400 because 2400 is enought i think..) So, if i have 300 Min And 2400 max which Min value Can i set without problems? 400?652?728?or 883?
Now i have 883.. It' ok for CPU or i should have problems ? I Can set more than 883?if yes what CPU Min frequency could i set?
I have set when The Phone is charging or screen is off or calling The CPU turns To normal values (300 Min 2400 max).
The governor i use is stock interactive scheduler row.
I dov'è care about battery. If The change drop fastly is Not a problem for me. I want The Phone more reactive And responsi possible without problems on the CPU ecc..
Shouldn't have any problems, you might experience a bit more battery drain, that's about it. Sometimes when my screen is on, my phone automatically adjusts to 1190 as min, so I don't think you need to do anything.
Stock kernel, rooted
883 is too Hight or i Can set more? Like 960 or 1036 or 1190?i think more that 1190 is excessive.
In My experience when you open setcpu And do Nothing normally The CPU is 300.when you simply touch The screen it increase To 1190 so The 1190 i think is the minimal value of CPU when you use The Phone for operations. So maybe i think i could be ok if i set 1190.
Upp
Set cpu or any other cpu application automatically set my cpu at 800mhz while i set 1400mhz max. And 1200mhz min. In ondemand governor or any other governor.
When i set any criteria of frequeny in which minimum mhz is higher than 800 mhz than it comes down to 800 mhz and stays there .Why ?
I tried set cpu,no frills cpu,cpu adjuster,rom toolbox lite.one by one i tried each app but problem is same in each case :/
there is a bug in stock lollipop and also in stock mm.
when you restart moto g2, you can see with cpuspy that freq.min is set to 787 mHz and not to 300 mHz(787 mHz is so high)
if you open and close "fotocamera" app this bug disappears( i don't know why) and the freq. min is now set to 300 Mhz. do you have the same bug?
Why do you think 787 is high? It uses the same voltage.
zman01 said:
Why do you think 787 is high? It uses the same voltage.
Click to expand...
Click to collapse
for battery i mean
Doesn't make a difference :
Here an explanation by zakee94 -
From 96MHz to 249.6 MHz -> cpu operates at voltage1
From 300MHz to 787.2 MHz -> cpu operates at voltage2
From 998.4MHz to 1593.6 MHz -> cpu operates at voltage3
where voltage3 > voltage2 > voltage1 .
Hence,
* 96MHz takes up as much current as 787Mhz
Hope it helps.
therefore there isn't differences in term of battery if freq.min is 300 mHz or 787 mHz. ..right?
filip2805 said:
therefore there isn't differences in term of battery if freq.min is 300 mHz or 787 mHz. ..right?
Click to expand...
Click to collapse
Yes
If you have screen on the minimum freq is set to 787 for smoother experience but when you turn off the screen it will be operating @300mHz or it's in deep sleep
CPU frequency c
I can't make it go over 1794 mhz with any kernel app
Why no performance in governor?
Are you having problems with your phone running slow or something?