Set cpu or any other cpu application automatically set my cpu at 800mhz while i set 1400mhz max. And 1200mhz min. In ondemand governor or any other governor.
When i set any criteria of frequeny in which minimum mhz is higher than 800 mhz than it comes down to 800 mhz and stays there .Why ?
I tried set cpu,no frills cpu,cpu adjuster,rom toolbox lite.one by one i tried each app but problem is same in each case :/
Related
program batery status is showing me freq on my CPU 553 Mhz?
I didnt change anything,maybe thats reason why my screen is flickering after restart...????
It's 528 MHz.
freq
...yes of course its after specification,but why the batery status is showing different number?
It's 345 789 528 MHz.
I have lgt gt540 with quarx custom rom . Can someone tell me how can i automaticly over/underclock to save power or boost performance. I would like to be able to automaticly overclock to 800 mhz on 100% battery and underclock to 100 mhz when under 25% battery.
I've tried set cpu and cpu tuner . Both can't push the cpu further than 600mhz which is the stock maximum frequency
Hello, I am curently using an galaxy mini plus device wich I want to UC but I don't exactly know how down can I modify the values of the voltage. Can yout ell me the best values wich I can set?
Thanks.
underclocking is easy
just root the phone, install setcpu and decrease the value
dheeraj (dhlalit11) said:
underclocking is easy
just root the phone, install setcpu and decrease the value
Click to expand...
Click to collapse
This is what I sad here. Decres the value to what value?
600 MHz is default in galaxy mini and is also stable
so it would also be stable in plus
but samsung have given around 800 MHz clock speed by default (there would also be a reason behind that)
choice is yours
dheeraj (dhlalit11) said:
600 MHz is default in galaxy mini and is also stable
so it would also be stable in plus
but samsung have given around 800 MHz clock speed by default (there would also be a reason behind that)
choice is yours
Click to expand...
Click to collapse
No no no, you don't understand.
DEFAULT VALUES:
832Mhz - 1360mV
624Mhz - 1300mV
468Mhz - 1275mV
312Mhz - 1250mV
AFTER I MODIFY:
832Mhz - 1250mV
624Mhz - 1250mV
468Mhz - 1225mV
312Mhz - 1200mV
How low can I go with the voltage I change? What are the best voltage with that freq?
depends on hardware
maybe you would be able to go a bit more low
maybe you will start getting bootloop
it completely depends on applying and testing
on 832 MHz you have applied 1250 mv which is the lowest voltage by default how much more undervolt you require
if your mobile is working OK on these settings these are best values just stick with these values
I will say
832 - 1300
624 - 1275
I go down to 1200 1175 1150 and 1100 and all is perfect.
these are way too much low for plus
your hardware may not work properly due to less supply of power
Hmm, ok, I will raise up to 1250 1225 1200 1175. I think if it works normal at these voltages I will keep them like so,
there is a bug in stock lollipop and also in stock mm.
when you restart moto g2, you can see with cpuspy that freq.min is set to 787 mHz and not to 300 mHz(787 mHz is so high)
if you open and close "fotocamera" app this bug disappears( i don't know why) and the freq. min is now set to 300 Mhz. do you have the same bug?
Why do you think 787 is high? It uses the same voltage.
zman01 said:
Why do you think 787 is high? It uses the same voltage.
Click to expand...
Click to collapse
for battery i mean
Doesn't make a difference :
Here an explanation by zakee94 -
From 96MHz to 249.6 MHz -> cpu operates at voltage1
From 300MHz to 787.2 MHz -> cpu operates at voltage2
From 998.4MHz to 1593.6 MHz -> cpu operates at voltage3
where voltage3 > voltage2 > voltage1 .
Hence,
* 96MHz takes up as much current as 787Mhz
Hope it helps.
therefore there isn't differences in term of battery if freq.min is 300 mHz or 787 mHz. ..right?
filip2805 said:
therefore there isn't differences in term of battery if freq.min is 300 mHz or 787 mHz. ..right?
Click to expand...
Click to collapse
Yes
If you have screen on the minimum freq is set to 787 for smoother experience but when you turn off the screen it will be operating @300mHz or it's in deep sleep
CPU frequency c
I can't make it go over 1794 mhz with any kernel app
Why no performance in governor?
Are you having problems with your phone running slow or something?