Database Develop

[Q] Can't mount /dev/block/st110 [Solved]

Hoping a kind soul can help a total fool who should have left well alone!
I have a UK Samsung Galaxy S I9000 phone that was unlocked by the previous owner but still had all the "3" branding which I wanted to remove. I was already on ver 2.2 (updated via Kies) although I don't know the exact revision.
After lots of reading (obviously not enough) I followed a guide to reflash via Odin v1.7 to I9000XWJS3 using separate files for PIT (803), PDA, PHONE and CSC. The guide said to tick Re-partition on which might have been the cause of my problem.
Needless to say after the flash, I got the error message "Can't mount /dev/block/st110" and subsequent reboots just give me a black screen. I still had access to the download mode so I tried another posts solution to fix the black screen starting with a flash to I9000XXJPC with a 512 pit and re-partition again. This time the odin process started but no progress bar materialised. After a very long while I disconnected. Thankfully I can still enter the download mode but this time am hoping someone with more knowledge is willing to help me though the process of recovering my phone if its still possible.
Just looking for any stock UK firmware and then I will let Kies update from now on.
Many Thanks
[Solved]
For those that want a quick summary of what restored my phone. Flashing I9000XXJPC with a 512 pit clicking re-partition.

snissim said:
Hoping a kind soul can help a total fool who should have left well alone!
I have a UK Samsung Galaxy S I9000 phone that was unlocked by the previous owner but still had all the "3" branding which I wanted to remove. I was already on ver 2.2 (updated via Kies) although I don't know the exact revision.
After lots of reading (obviously not enough) I followed a guide to reflash via Odin v1.7 to I9000XWJS3 using separate files for PIT (803), PDA, PHONE and CSC. The guide said to tick Re-partition on which might have been the cause of my problem.
Needless to say after the flash, I got the error message "Can't mount /dev/block/st110" and subsequent reboots just give me a black screen. I still had access to the download mode so I tried another posts solution to fix the black screen starting with a flash to I9000XXJPC with a 512 pit and re-partition again. This time the odin process started but no progress bar materialised. After a very long while I disconnected. Thankfully I can still enter the download mode but this time am hoping someone with more knowledge is willing to help me though the process of recovering my phone if its still possible.
Just looking for any stock UK firmware and then I will let Kies update from now on.
Many Thanks
Click to expand...
Click to collapse
You still can use xxjpc, with repartition ticked. Many a times, odin will fail for no reasons. Try again, but make sure you close Kies completely.
Sent from my GT-I9000 using XDA App

Thanks g00ndu. You gave me the courage to re-run xxjpc again by confirming I was on the right track and this time it worked. Small donation on its way for helping me recover my phone.
I have one further question though. Can someone confirm if the I9000XXJPC firmware is for the UK? I hope to only use Kies from now on but it now says "the version of the device cannot be updated". I am using the latest version 2.0.0.11014_49.
Thanks again
Edit - Kies lists the current firmware version as PDA:JPC / PHONE:JPC / CSC:JPC (KOR). Something tells me I have the wrong country firmware. If anyone can provide a link to the correct one and the Odin settings I should use it would be greatly appreciated.

Still trying to get a solution to this and have noticed that my product code in Kies registry entry is GT-I9000HKDKOR. I am wondering if this is because I used a wrong CSC file?
Any directions would be very welcome.
Thanks

Go to www.samfirmware.com and grab the Europe/UK firmware. Get a 2.2.1. one. All the CSC, Phone, Modem files should be in the package.

Thanks snapper.fishes. I am now downloading I9000XXJPU (512.Pit) - hopefully this one is correct as some of the downloads for 2.2.1 show (803.Pit). As there are no instructions with this I assume I don't click re-partition. Is this correct?
Thanks for the help

This is almost soul destroying....
I ran the update "I9000XXJPU (512.Pit)" as mentioned above and it flashed successfully. I am now on 2.2.1
Re-plugged in the usb cable and no windows popup to view the sd contents and nothing in "My Computer". Kies recognises something has been plugged in but remains on "connecting" - the phone itself shows the usb graphic and "connected".
I then went into Settings -> About Phone and there is no USB Settings option.
And just to rub it in I typed in *2767*4387264636# as per the wiki guide on here to view the Product code and it's still on Korea GT-I9000HKDKOR.
Edit - Have now tried *#1234# and the phone says:
PDA: I9000XXJPU
PHONE: I9000XXJPU
CSC: I9000OXAJPU
Not even sure if this bit helps

In case this is a help to other novices like me with the wrong product code. I found the following info and you don't need to be rooted to run it:
E.g. Changing CSC to XEU: Note - this will only work if the multiCSC was used when firmware was flashed
Type *#272*IMEI# and select XEU to install. (to check IMEI: *#06#)
Phone will reset to the default setting (perform a backup beforehand if req)
XEU = UK's product code
As for the USB issue (no USB Settings menu option in About Phone), is this just a change in the 2.2.1 menus? I noticed a USB Settings menu in "Wireless and network" and they have changed how this works. Kies still refuses to connect to the phone, but maybe this is just Kies.
Thanks

Jpu firmware is broken with kies. I think from memory that jpy and onwards allows that connection.
Jpu wasn't considered a official firmware but it worked incredibly well.bar the kies problem.
Sent from my GT-I9000 using XDA App

Me Too!!
I'm getting the same error the op did.
What happened? I flashed CM7 and it worked fine. I then decided to do a restore with the backup I had made earlier with CWM, this is when **** went wrong. Couldn't boot up after this or get to recovery. Went into download mode and tried to reflash factory firmware. JL2 Andriod 2.2 for Bell Canada I9000. Says successful but just boots to 3e recovery with " /dev/block/st110, (Invalid argument), E:copy_dbdata_media:Can't mount DBDATA: "
Below that it says: " your storage not prepared yet. please use UI menu for format and reboot actions. copy default media content failed.
My biggest fear is the dreaded Int.SD card failure, the op gave me hope but same thing after every reflash.
Any suggestion?

I also have a Bell I9000M that did that. After attempting several combinations what ended up working for me was flashing JPU with 512.pit and repartition enabled, modem, PDA and CSC all selected in odin 1.3. That got me a working device. Then flashed JH2 to get recovery 2e back. Then flashed to the ROM I was originally on (Darky's 9.3). After that I flashed a CWM zip for the JL2 modem to get data back.
Sent from my GT-I9000 using XDA App

Also very important, for JH2 I did PDA only. No pit, no repartition.
Sent from my GT-I9000 using XDA App

Saved my bacon
Corvillus said:
I also have a Bell I9000M that did that. After attempting several combinations what ended up working for me was flashing JPU with 512.pit and repartition enabled, modem, PDA and CSC all selected in odin 1.3. That got me a working device. Then flashed JH2 to get recovery 2e back. Then flashed to the ROM I was originally on (Darky's 9.3). After that I flashed a CWM zip for the JL2 modem to get data back.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Dude you totally saved my bacon. I was dreading the possibility of having to go to Bell. Totally worked, though coolirs media or something keeps force closing but at least the phone is working. Just gonna flash cm7 now since I have to start from scratch anyway.
Thanks again!

icejagans said:
Jpu firmware is broken with kies. I think from memory that jpy and onwards allows that connection.
Jpu wasn't considered a official firmware but it worked incredibly well.bar the kies problem.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks icejagans. Its a relief to know that this is just an incompatibiliy between kies and the JPU firmware. Do you know if there has been an official 2.2.1 firmware available via Kies for UK unbranded I9000s?
Edit - icejagans you're a star, the JPY update fixed the USB oddity I was having and even Kies now connects OK. I will mark this thread as solved.
Thanks for everyones help

Hi,
I have the same problem, Can´t mount /dev/block/stl10
My phone is Gt-i9000 Made in Korea i9000gsmh
I don´t know what stock from is factory rom for my phone.
Any suggestion ?
Thanks

[Q] phone and kies say different things!

Hi I flashed my phone using rom kitchen but before i did it i backed up my phjone using CWM, I believe o2 are starting to roll out the official 2.2.1 upgrade so i restored my phone using CWM, now my phone says it is
pda jp6
phone jpy
csc o2ujp3
but when i connect it through kies it says its
csc jp3(XEU)
and it cannot be updated
so, can anyone tell me how i can get kies to read it as o2ujp3 instead and if so how, i have read about spoofing kies but dont know what to do or what to put in where thankyou

Flash back your original rom that you saved which you have done i would then factory reset .
2.2.1 O2 Uk I wont bother wait for Gingerbread .
jje

[Q] Kies .sbu backup.

Okay, here goes.
First up; Samsung Galaxy S i9000
Before I delved into flashing and the like, I backed up my videos, contacts and memos to kies, which I realize now is a bad idea. I've flashed my SGS with the Ultibread 1.4 ROM and I love it. The problem is now my phone isn't connecting to kies. Is there any way I can access the backup without kies OR get my phone to connect to kies?

Did you check Kies folders? Your files are probably located somewhere there, try searching for a known filename.

Their have been similar topic posts might be worth searching them .
jje

Can I use kies to flash back to stock rom or should I use Odin? I'm on darky's rom and want learn how to go back to stock rom incase I need to send my phone in for repair ever.

Kies wont recognise your phone unless you have correct rom details .
Flash back to stock via Odin then try Kies update .
Or search Kies spoofing method .
Take it you failed to save your original rom .
jje

Yepp, I've got a .sbu file which is the backup, but as far as I'm aware there's not much I can do with it without kies connecting to my phone.
Also jje, I did have a bit of a search around but with no luck. Perhaps a push in the right direction?
Cheers.

Upgrade to gingerbread..!!

Hello,
Previously i unlocked my sgs from orange provider,with 2.2 froyo. For android froyo, i installed it through kies registry hack previously.
Now i want to upgrade it to gingerbread 2.3, can i use same kies registry hack? and if i upgrade, does my phone going to locked it again??? or it's not going work??
Thanks.

Try to flash it in download mode with odin, you can find all information in General
(http://forum.xda-developers.com/forumdisplay.php?f=657)

Unable to upgrade firmware via Kies after flashing to stock rom

Hi,
I flashed my SGS to CM7 and don't really like it. I have downloaded the firmware ( I9000DXJF4 )from sammobile and flashed it. However, I am unable to upgrade the firmware using Kies to the new firmware available thru Samsung.
My current version is as followed
PDA: I9000DXJF4
PHONE: I9000DXJF4
CSC: I9000OLBJF4
From the look of my phone, everything seem to be back to its original setting, with all the singtel (my telco provider ) apps. Now I am trying to upgrade to Froyo 2.2 (I think) using Kies. Kies prompted that it is unable to update the firmware. I tried the latest version of kies and also version 1.5. Both are unable to do so.
Anyone can kindly advise?

Try changing your CSC code to XEU. I encountered some issues with KIES updates when having CSC code KOR.

Hi,
I tried to change to XUE but this option is not available. I go into CSC by *#272*HHMM#. Is it wrong?

*#272*???????????????# (??????????????? it's your IMEI, it must have 15 digits)
or try https://market.android.com/details?id=com.nfye.insanity.toolbox

Hi,
Thanks for your help. I got my IMEI code. It pop up in a small window. Then I tried to change the CSC using the method u mentioned. But nothing happen. When I press the call button, it say "USSD code running..." then follow by "UNKNOWN APPLICATION"
I also tried to install the software, but it is only for android 2.2 and above. I tried to find the crack version for the premium version but cant find any. Do you have the premium version? Can upload to mediafire and send me the link?

Never try to install via KIES ..
Install via ODIN the Firmware you want it's simply better, even if ODIN is unofficial.
Introductions you will find by googleing I think .. it's easy.
Good luck and have fun

Hi,
Ya, using Odin now. But still prefer Kies over Odin. A lot of stuff become automatic with Kies.
I just flash to DXJG4 hoping to be able to link to kies but it failed.
I read that once the lagfix is fixed, there will be problem with kies. Am I fixing the lagfix in anyway thus leading to this problem?

Did you get solution to your problem? I had the same problem with a Galaxy Wonder... when i tried to upgrade via kies i got this screen..
That I cannot post actually because the forum prevents me from doing it...
BUT...
I tried OTA upgrade with perfect results... And the funny thing is that I NEVER before could start OTA...
BTW everything's fine now and I bumped to 2.3.6 ggbrd

nuky8181 said:
Hi,
I flashed my SGS to CM7 and don't really like it. I have downloaded the firmware ( I9000DXJF4 )from sammobile and flashed it. However, I am unable to upgrade the firmware using Kies to the new firmware available thru Samsung.
My current version is as followed
PDA: I9000DXJF4
PHONE: I9000DXJF4
CSC: I9000OLBJF4
From the look of my phone, everything seem to be back to its original setting, with all the singtel (my telco provider ) apps. Now I am trying to upgrade to Froyo 2.2 (I think) using Kies. Kies prompted that it is unable to update the firmware. I tried the latest version of kies and also version 1.5. Both are unable to do so.
Anyone can kindly advise?
Click to expand...
Click to collapse
You can download all the recent firmware from sammobile and you can flash it via odin. Flashing stock ROM via Odin