Related
Hello Everyone,
Does anyone know how or has anyone seen anything about doing this. Please point me in the right direction. I've been in the forum searching for a few days now.
What do you mean tightening?
Interesting you'd bring this up. My first Tilt's screen was solid, hardly any play at all. It became loose, and I returned it and got a refurb which was worse. I just returned that one (different issue) and it's solid. What he means (I think) is that the space between the two halves is more than it should be. I'm not sure of what causes this variance, but, it's annoying. Especially when you tap the screen because it gets all jostled around.
I'd imagine that you'd have to have a jeweler's screw driver or such, and get to some tiny screws somewhere.
Doug
I was assuming me means tightening the 'tilt' mechanism (brackets)??
MineralGray02K said:
I was assuming me means tightening the 'tilt' mechanism (brackets)??
Click to expand...
Click to collapse
Yeah, I saw the tutorial for making it tilt farther.
dougrb said:
Interesting you'd bring this up. My first Tilt's screen was solid, hardly any play at all. It became loose, and I returned it and got a refurb which was worse. I just returned that one (different issue) and it's solid. What he means (I think) is that the space between the two halves is more than it should be. I'm not sure of what causes this variance, but, it's annoying. Especially when you tap the screen because it gets all jostled around.
I'd imagine that you'd have to have a jeweler's screw driver or such, and get to some tiny screws somewhere.
Doug
Click to expand...
Click to collapse
I have had this one for quite a while, would that matter.
Is there a way to tighten the tilting mechanism on the kaiser if or when it loosens up a bit?
I've done a quick google but found nothing.
dougrb said:
Interesting you'd bring this up. My first Tilt's screen was solid, hardly any play at all. It became loose, and I returned it and got a refurb which was worse. I just returned that one (different issue) and it's solid. What he means (I think) is that the space between the two halves is more than it should be. I'm not sure of what causes this variance, but, it's annoying. Especially when you tap the screen because it gets all jostled around.
I'd imagine that you'd have to have a jeweler's screw driver or such, and get to some tiny screws somewhere.
Doug
Click to expand...
Click to collapse
mine is getting that way. it's not bad, yet. but it's getting that way
I think I might give it a shot at figuring it out. I saw a modification to make tilt straight so somewhere in there may be th ething to make a little more stiff.
I'd venture a guess and say that for those who's screens have become more and more loose over time, it would be a screw to tighten. (or a few) BTW, the new one I got today is tight as the abs of steel girl's butt...
I have a similar issue and I need soe guidance. My screen is "shifting". The two halves are not matching up evenly any longer. There is about a 1/16" overhang of the top half and the bottom half when the phone is closed.
Any help to loosen and then shift the top half so it is equal to the bottom would be appreciated.
I had this problem, too, and fixed it myself. Here's the thread where I talk about it. There's a little rubber bumper at the end of each slider track and mine were malformed, so I added some layers of plastic to make them thicker. Check out the pics in this thread to see where the bumpers are:
http://forum.xda-developers.com/showthread.php?t=346104
maxh said:
I had this problem, too, and fixed it myself. Here's the thread where I talk about it. There's a little rubber bumper at the end of each slider track and mine were malformed, so I added some layers of plastic to make them thicker. Check out the pics in this thread to see where the bumpers are:
http://forum.xda-developers.com/showthread.php?t=346104
Click to expand...
Click to collapse
Thank you. I appreciate the direction. I'll be sure to check that out today.
Is anyone else having this problem:
I noticed that if I press down on the middle left side of the screen in portrait mode (the very edge of the screen) that I hear a "click" sound, almost like it's loose underneath. The rest of the screen doesn't click, only this part. I've read other reports about people having issues with the screen coming up, and was concerned. Nothing looks loose, and everything feels solid, but again, slightly concerned.
There's another thread going on about this very thing: http://forum.xda-developers.com/showthread.php?t=1774438
--
Sent from my SGH-I777 using xda app-developers app
Not really. I mean yes at first I had to press down REAL hard and it was a very minute one, but not terrible. Now it's not doing it anymore so it just may have been a placebo effect for me.
Is it very noticeable on yours? I only noticed it when I depressed quite hard in the exact middle left of the border (not the screen).
Sent from my Nexus 7 using xda premium
dzap said:
Not really. I mean yes at first I had to press down REAL hard and it was a very minute one, but not terrible. Now it's not doing it anymore so it just may have been a placebo effect for me.
Is it very noticeable on yours? I only noticed it when I depressed quite hard in the exact middle left of the border (not the screen).
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Sup dzap! :highfive:
Not too noticeable. I hear the click mostly when I left my finger off the side. Almost like something is coming up. On visual inspection, everything "looks" ok.
huge issue on this build, adhesive releases the glass and thus the sound you feel hear. charge it up, N7 will heat up and this sound will become less pronounced becasue glue will soften and then when it cools off the clicking sound will be back. They must be saving on the glue to get it under $199
phonic said:
Sup dzap! :highfive:
Not too noticeable. I hear the click mostly when I left my finger off the side. Almost like something is coming up. On visual inspection, everything "looks" ok.
Click to expand...
Click to collapse
dvzzz said:
huge issue on this build, adhesive releases the glass and thus the sound you feel hear. charge it up, N7 will heat up and this sound will become less pronounced becasue glue will soften and then when it cools off the clicking sound will be back. They must be saving on the glue to get it under $199
Click to expand...
Click to collapse
Thanks for the info. If all it ends up being is a slight noise every so often, I can live with that. If the screen starts falling apart - that's a different story. I didn't even notice it until I started looking for problems .
I had the same problem on my 5th GNex. I exchanged it for another one. It depends how much it bothers you I guess.
dvzzz said:
huge issue on this build, adhesive releases the glass and thus the sound you feel hear. charge it up, N7 will heat up and this sound will become less pronounced becasue glue will soften and then when it cools off the clicking sound will be back. They must be saving on the glue to get it under $199
Click to expand...
Click to collapse
I had this problem and am in middle of getting a replacement unit. However, I am hesitant of the adhesive/heat theory going around, partly from others' reports of clicks, although I heard none (but I didn't push as hard as some) and partly as the ifixit teardown didn't mention adhesive other than partially securing the battery to the frame--and, adhesive is something they always like to mention. Moreover, the pics they show suggest a mixture of clips and screws securing things internally. I suppose I am suggesting we try to not take things for granted
kboya said:
I had this problem and am in middle of getting a replacement unit. However, I am hesitant of the adhesive/heat theory going around, partly from others' reports of clicks, although I heard none (but I didn't push as hard as some) and partly as the ifixit teardown didn't mention adhesive other than partially securing the battery to the frame--and, adhesive is something they always like to mention. Moreover, the pics they show suggest a mixture of clips and screws securing things internally. I suppose I am suggesting we try to not take things for granted
Click to expand...
Click to collapse
I've been hearing the same. It sounds like people are assuming it's adhesive when it's really some sort of retainer clip that locks the device in place. I can't really comment one way or another, but based on what I've been hearing from user reports, I'd bet my car it's clips... not adhesive. But hey, I may be wrong and riding my bike to work tomorrow.
You are right, I should not be making definitive statements, I checked iFixit and I do not see a glue there but at the min my screen issues have something to do with heat and expansion, once the device on charge or in my hand for extended period of time the left side separates and rises .5-1mm above the bezel, I press it in and then it "sticks" for another hour or so. I am perhaps incorrectly assumed an adhesive but it must be a weak clip that cannot hold the glass once body expands... At the end of the day, my goal was to keep this little powerhouse N7 but hate to press that glass in all the time until I break it. I am sure they will eventually fix it in the new builds 3-6 months from now but all I was saying that many many folks are reporting separating bezel issue, it must be more than a coincidence.Returned to Sam's club it but there is no replacement for it for another 30 days or so coming to Sam's Club and by then there can be competitors coming, e.g. nanoiPad. Even though I really liked the Android N7 too bad Asus QA is not in the big league, but you cannot have everything at $199 or $260, quality costs money, I know Motorola overengineered Xoom to stand up on quality and it did.
kboya said:
I had this problem and am in middle of getting a replacement unit. However, I am hesitant of the adhesive/heat theory going around, partly from others' reports of clicks, although I heard none (but I didn't push as hard as some) and partly as the ifixit teardown didn't mention adhesive other than partially securing the battery to the frame--and, adhesive is something they always like to mention. Moreover, the pics they show suggest a mixture of clips and screws securing things internally. I suppose I am suggesting we try to not take things for granted
Click to expand...
Click to collapse
For anyone having the infamous left side screen lift issue. This includes being able to physically see the glass protruding the silver bezel, screen sponginess, and being able to hear the screen stick/unstick from the adhesive.
After reading this thread http://forum.xda-developers.com/showthread.php?t=1800418 it is apparent the screws are a hair too long. When tightened all the way, they actually can press the screen glass out.
The easiest thing for anyone to try is to just LOOSEN the screws just 1/4 turn. You are loosening the screws so very little, that they will stay snug as far as holding what they are supposed to, but they will no longer push out on the screen glass. I didn't even bother with finding a screw driver, and just used my pocket knife. My screen was raised in the very middle of the left side, so I only loosened the 2 screws directly under the seperation. I suppose this will not work for everyone, but it's so simple and only took me less than 2 mins, you might as well give it a shot. Good luck!
Great thanks
Sent from my Nexus 7 using Tapatalk 2
If you're going to loosen screws you probably want to Loctite them.
http://forum.xda-developers.com/showpost.php?p=29457665&postcount=41
eh hem...what gave you this idea? jk
Just don't overdo it and you'll be fine. No need for loctite, it's only a small turn and the screws are still plenty secure.
---------- Post added at 12:29 AM ---------- Previous post was at 12:28 AM ----------
Loosening the screws in some areas will also help with backlight bleed. If you notice a spot near a screw that is really bright, it's most likely a little too tight.
I found this out by testing different "tightness" adjustments. When I went too far, I noticed back light bleed starting to show, loosen it up a bit and it went away.
This actually worked! So far, anyway. We'll see if it's a permanent fix, but it looks promising.
ferris2375 said:
http://forum.xda-developers.com/showpost.php?p=29457665&postcount=41
eh hem...what gave you this idea? jk
Just don't overdo it and you'll be fine. No need for loctite, it's only a small turn and the screws are still plenty secure.
---------- Post added at 12:29 AM ---------- Previous post was at 12:28 AM ----------
Loosening the screws in some areas will also help with backlight bleed. If you notice a spot near a screw that is really bright, it's most likely a little too tight.
I found this out by testing different "tightness" adjustments. When I went too far, I noticed back light bleed starting to show, loosen it up a bit and it went away.
Click to expand...
Click to collapse
Lol yeah I saw your posts. I mean, that's the same thing I thought of right away. The washers seemed to be a stiff foam, so they compress when screws are tightened. I figured I could loosen them but at the same time keep them snug.
But yeah man good stuff. Did it work for ya?
This.
The washer idea is smart, but for me it caused a more annoying problem. The frame was too thick and pulled the silver trim piece away from the screen and caused a creaking noise at the slightest touch that was way worse than the screen lift.
I just loosened every screw and tightened them back with basically no torque after they stopped turning. All is good now, no creak from the trim and no screen lift, though it's basically flush on he left side
Sent from my Nexus 7
jweitzel24 said:
This.
The washer idea is smart, but for me it caused a more annoying problem. The frame was too thick and pulled the silver trim piece away from the screen and caused a creaking noise at the slightest touch that was way worse than the screen lift.
I just loosened every screw and tightened them back with basically no torque after they stopped turning. All is good now, no creak from the trim and no screen lift, though it's basically flush on he left side
Sent from my Nexus 7
Click to expand...
Click to collapse
Cool. So did you end up loosening the screws then? Meaning, when you re-tightened them, you didn't tighten them as tight as they were from the factory?
Very interesting... I thought the glass was supposed to be flush with the bezel, until I read your comment. After looking at it, the left side of my glass is also flush with the bezel, while the right side glass sits just a little lower.
That's no big deal to me though, as long as my screen is seated properly.
jaycustom said:
Cool. So did you end up loosening the screws then? Meaning, when you re-tightened them, you didn't tighten them as tight as they were from the factory?
Very interesting... I thought the glass was supposed to be flush with the bezel, until I read your comment. After looking at it, the left side of my glass is also flush with the bezel, while the right side glass sits just a little lower.
That's no big deal to me though, as long as my screen is seated properly.
Click to expand...
Click to collapse
Probably a little lighter than factory. Honestly, mine wasn't bad to begin with but like every other ocd person on here, I just couldn't resist opening it up and tightening the screws. At that point, the screen lift started getting worse and I moved on to the other half-dozen or so "fixes" when, it turns out, the screws being too tight was making everything way worse.
But yeah, its been a couple hours now and it still feels real solid. I've got a tpu case on order so regardless I'm done messing with it.
Sent from my Nexus 7 using xda app-developers app
jweitzel24 said:
Probably a little lighter than factory. Honestly, mine wasn't bad to begin with but like every other ocd person on here, I just couldn't resist opening it up and tightening the screws. At that point, the screen lift started getting worse and I moved on to the other half-dozen or so "fixes" when, it turns out, the screws being too tight was making everything way worse.
But yeah, its been a couple hours now and it still feels real solid. I've got a tpu case on order so regardless I'm done messing with it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Cool beans. Luckily, like your N7, mine wasn't bad either.
Couldn't really tell it was lifted by looking at it, but it was the sponginess and that horrible stick/un-stick sound. This is the first fix I tried, and luckily it worked. Let me know how yours turns out, with or without the case..
I simply loosened all screws then tightened them up. Also, Part of a sponge bumper was tucked under a copper shield which I untucked.
Now when I push hard on the left part of the screen I don't get the tacky sound when i unpress it. Also, screen isn't as bulged. In fact you can't even tell anymore.
Neither was a real problem on my n7 but I prefer to make it perfect. This solved everything.
MikeMurphy said:
I simply loosened all screws then tightened them up. Also, Part of a sponge bumper was tucked under a copper shield which I untucked.
Now when I push hard on the left part of the screen I don't get the tacky sound when i unpress it. Also, screen isn't as bulged. In fact you can't even tell anymore.
Neither was a real problem on my n7 but I prefer to make it perfect. This solved everything.
Click to expand...
Click to collapse
Awesome. Mine wasn't bad either, so I just tried for something simple. It seems like the screws may be too long and pressing on the glass, so I thought to just back them off a hair. 2 minutes later the screen is perfect
jaycustom said:
Awesome. Mine wasn't bad either, so I just tried for something simple. It seems like the screws may be too long and pressing on the glass, so I thought to just back them off a hair. 2 minutes later the screen is perfect
Click to expand...
Click to collapse
If you take one of the screws out near the central left and shine a light straight down, you will notice that it is open on the other side as in the the screw can pass through. You will also see a portion of the LCD sticking out underneath those screw holes.
I think the LCD isn't suppose to stick out and get underneath the holes, because otherwise the screws won't hit anything and be tightened all the way. I think for some people without screen lift, the partially sticking out LCD might have been crushed and deformed with the screws or the LCD just isn't sticking out as much.
I've been screwing (pardon the pun) about with this some more today, what I have noticed with mine, is if I take the back off and remove all screws the screen sits perfect, put the screws back in, still seems perfect, clip the back on and the screen now sits above the frame on the left, wondering if mine is an issue with the back plate pushing something out of line.
This worked for a while for me but after it heated up the spongy noise returned. HOWEVER I did notice that loosening the screws did fix the touchscreen issue where it was unresponsive at times.
jaycustom said:
Lol yeah I saw your posts. I mean, that's the same thing I thought of right away. The washers seemed to be a stiff foam, so they compress when screws are tightened. I figured I could loosen them but at the same time keep them snug.
But yeah man good stuff. Did it work for ya?
Click to expand...
Click to collapse
Haha. I was just messing with ya. This is certainly better than adding a shim but I never had the problem. I just wanted to test this out and take my screws back a bit just in case. The other fix is not the way to go as it screws up the casing.
Still no issues though.
Sent from my Nexus 7 using Tapatalk 2
Summerfly said:
If you take one of the screws out near the central left and shine a light straight down, you will notice that it is open on the other side as in the the screw can pass through. You will also see a portion of the LCD sticking out underneath those screw holes.
I think the LCD isn't suppose to stick out and get underneath the holes, because otherwise the screws won't hit anything and be tightened all the way. I think for some people without screen lift, the partially sticking out LCD might have been crushed and deformed with the screws or the LCD just isn't sticking out as much.
Click to expand...
Click to collapse
Thanks for this.
I'm going to open it up again and consider using mini-washers, or something, just to ensure my now-tightened screws are not pressing on the LCD.
Genius. Popped the back off with a knife, loosened the screws down the left side of the screen a quarter of a turn, and now it's perfect - no more squeaking, no more raised screen. Took about 2 mins to do it.
Also, for those who want a decent cover, I bought a Belkin case from PC World yesterday (quite pricey at £30 but I like to try these things out before I buy them rather than just buy online). Even though it's designed for the 7" Samsung Galaxy Tab, it's a near-perfect fit for the Nexus 7. Speaker cut-out is in the wrong place but it doesn't affect the quality noticeably (besides, I hook mine up via Bluetooth to a Jawbone Jambox). Also got myself a sat nav mount and stuck it on the wall next to my bed, so my Nexus 7 is now a handy portable TV
I fixed mine without even getting inside. Just used a blowdryer and heat up the side while holding the screen down. Seemed to stay put and still is.
Simply awesome, completely fixed that annoying screen bulge on the left side!
OK, despite all adversities with the dock and connection I've had with my TF701T, I'm still very happy with the tablet part of it (despite some software qualms). But this morning when I was clearing out my tablet's screen (by breathing on it and wiping it, I know, not the best thing to do) a spot appeared on it. I've had such a spot come up before but not as large and it would usually disappear in a few seconds. But this time the spot persisted. For a whole day (around 6 hours). I read up on a thread about moisture getting stuck under it but it should evaporate quickly. I thought that the glass might be bent to touch the matrix below it but I dared to turn on the screen and it worked. The spot is less visible on white backgrounds. Here are 2 pictures:
https://imagizer.imageshack.us/v2/4160x2340q50/674/LIjh4A.jpg
https://imagizer.imageshack.us/v2/1360x765q90/673/5hgtO0.jpg
Does anyone have any idea what this might be? Moisture build-up? Bent glass? How do I go around fixing it? Will they accept my warranty or just tell me I broke it myself?
Probably moisture. Just using it (screen on) should take care of it after a while. Or you can try a hair dryer (lowest setting), but don't get it too hot.
I don't think they would fix it under warranty. Unless you have a 3rd party warranty like Squaretrade...
I came back home after a night out just after I posted this thread. I saw berndblb's post and intended to do the blow dryer thing in the afternoon but my tablet was OK when I was back in the early morning. Apparently it was really just moisture and it was alright on its own. I just hope this doesn't happen again. I don't like the idea of having my screen getting wet and probably getting messed up. Good thing I don't live in a jungled area, lol.
This happens to my TF701 as well, fairly regularly. It's not moisture, it's the glass making contact with the touch matrix. I used to somewhat consistently get rid of it by just blowing into the charging port, which would loosen the glass (and disprove the moisture idea as well). Now, I just bend gently from each side and upward in the middle and it unsticks immediately. I also noticed that the upper corners are somewhat loose, which is what leads to the bending in the first place.
It's probably just ASUS's terrible quality control on the TF701. I basically had no problems with my old TF300, but the TF701 and its dock have been riddled with issues and defects.
Thanks
Thanks brother, i just bought windows 8.1 tab in rainy season. My city is hot and humid, so in 2 days i found a big dark spot due to moisture in the center of screen. I read your post and did the same, and got rid of it in just a single blow....... Tanks once again....
mastermind777 said:
This happens to my TF701 as well, fairly regularly. It's not moisture, it's the glass making contact with the touch matrix. I used to somewhat consistently get rid of it by just blowing into the charging port, which would loosen the glass (and disprove the moisture idea as well). Now, I just bend gently from each side and upward in the middle and it unsticks immediately. I also noticed that the upper corners are somewhat loose, which is what leads to the bending in the first place.
It's probably just ASUS's terrible quality control on the TF701. I basically had no problems with my old TF300, but the TF701 and its dock have been riddled with issues and defects.
Click to expand...
Click to collapse
Is anyone else's xz1 compact body bent or not straight?
I have had mind a couple of weeks and been super careful with it, so I don't think I bent it or something. I didn't notice until today when I set my phone down on a flat table as I was finicking with it when I noticed it rocked back and forth and wasn't perfectly flat to the table. It is particularly noticeable in the front side (I think part of this is due to the edges around the screen not being completely flush or evenly flat. The back does it much less, but I think that may because of the curved back on the back. After looking down the back side of the phone I realized it was clearly not straight and could see It curve.
Anyone with similar issues? Thanks!
The border around the camera lens is protuding a tiny bit from the back of the phone, to protect the lens from scratches.
The top and bottom edges of the phone are protruding to protect the screen from being scratched when placed face down.
Though it does not rock for me.
What sort of curve?
Mine doesn't rock when on its back, and I have a screen protector on the front which is slightly taller than the top and bottom metal caps, so it is also stable.
When I bought my phone in store, per procedure they had me inspect the phone for obvious damage or defects.
The first unit I got unfortunately had assembly issues with the top and bottom metal caps, there was a noticeable gap on both ends and they protruded unevenly. One end protruded to the front, and the other to the back.
At first they tried to play it off as non-issue, citing manufacturing tolerance, and refused to let me exchange a new one, but I insisted and eventually they agreed to give me another unit, which is the one I'm currently using.
Does your unit have similar unevenness with the metal caps? Maybe that's the cause of the instability. I do not perceive any curves on the body of my phone.
The border around the camera lens is protuding a tiny bit from the back of the phone, to protect the lens from scratches.
The top and bottom edges of the phone are protruding to protect the screen from being scratched when placed face down.
Though it does not rock for me.
Click to expand...
Click to collapse
I didn't think about the camera, good point, that may be some of the issue when it's on its back. The rocking when it's on its back is mild, so it may be the camera lens ring. However, I can look down the phone close with my naked eye and notice the bend pretty easily.
I do realize the front 'metal caps' protrude a little to protect the screen, but as mhaha says below, those edges are not necessarily uneven. The top metal cap sticks out further, in general, than the bottom. Individually, if I run my finger down the cap edges on the face of the phone I think I can feel where they get closer/further from the screen in places (it is very slight, so maybe that one is more in my head). I also didn't notice the uneven gap edge until you said that, I can't really physically feel that one so I think it's a little less of an issue. But, yes, on the left side of my screen it's super snug up against the side bezel and on the right I can see a very slight gap, in comparison.
My phone rocks bad on its face/front , diagonally from the cameras corner to the corner opposite.
I have actually requested my return (I ordered mine online) and will very likely be sending it back. I am not sure ill get a replacement either, for now just the return.
Thank you both very much!
mhaha said:
What sort of curve?
Mine doesn't rock when on its back, and I have a screen protector on the front which is slightly taller than the top and bottom metal caps, so it is also stable.
When I bought my phone in store, per procedure they had me inspect the phone for obvious damage or defects.
The first unit I got unfortunately had assembly issues with the top and bottom metal caps, there was a noticeable gap on both ends and they protruded unevenly. One end protruded to the front, and the other to the back.
At first they tried to play it off as non-issue, citing manufacturing tolerance, and refused to let me exchange a new one, but I insisted and eventually they agreed to give me another unit, which is the one I'm currently using.
Does your unit have similar unevenness with the metal caps? Maybe that's the cause of the instability. I do not perceive any curves on the body of my phone.
Click to expand...
Click to collapse
you may be having this issue?
https://sumahoinfo.com/xperia-xz1-compact-so-02k-docomo-fuguai-issue-body-twisted-distorted
It's in Japanese but the photo explains, I think.
yyiimm said:
you may be having this issue?
https://sumahoinfo.com/xperia-xz1-compact-so-02k-docomo-fuguai-issue-body-twisted-distorted
It's in Japanese but the photo explains, I think.
Click to expand...
Click to collapse
Yeah, my top metal cap isn't as in line as the bottom, now that I see that. Thanks very much! That would definitely contribute to a wobble on a flat surface.
But, there are still all the other issues I've noted, so I'm quite confident it's a number of issues contributing to it all.
Thanks!
yyiimm said:
you may be having this issue?
https://sumahoinfo.com/xperia-xz1-compact-so-02k-docomo-fuguai-issue-body-twisted-distorted
It's in Japanese but the photo explains, I think.
Click to expand...
Click to collapse
1230m said:
Yeah, my top metal cap isn't as in line as the bottom, now that I see that. Thanks very much! That would definitely contribute to a wobble on a flat surface.
But, there are still all the other issues I've noted, so I'm quite confident it's a number of issues contributing to it all.
Thanks!
Click to expand...
Click to collapse
The photo isn't quite a good descriptor of the problem though.
The photo suggests that it's just the way the metal end-caps are installed is what's causing the rocking.
If you run the link through a translator, the author states that the metal caps are misaligned because the plastic/glass-fiber body itself is warped.
So you may want to look at getting the phone replaced.
I dropped my phone on the road 2nd day of use. The metal edge got scratched, but the phone survived. The only other issue I noticed was twisted body. Looking from the edge, the twisted edge was easy to notice, and surface wobble was also there. I held the edges of the phone and put some pressure in opposite direction (trying to twist it back), and now my phone seems straight/aligned).
Please don't try this at home and come complain to me if something goes wrong. Since I dropped my phone, I couldn't just return it and get it replaced. Also not sure if the drop twisted it, or just pressure in my jeans pocket. Also not sure if the twist will come back. For now, the phone is fine.
I just bought XZ1 (not XZ1C) in UK, and having similar issue.
I'm not sure if the "cap" in misplaced or the whole body is twisted, but when I put the device face down, it rocks
pbarrette said:
The photo isn't quite a good descriptor of the problem though.
The photo suggests that it's just the way the metal end-caps are installed is what's causing the rocking.
If you run the link through a translator, the author states that the metal caps are misaligned because the plastic/glass-fiber body itself is warped.
So you may want to look at getting the phone replaced.
Click to expand...
Click to collapse
Thanks for the further insight, I'm grateful! I will be returning the phone. I'm undecided on whether or not I would like to purchase another after. I kinda wanted to see how the future quality/reviews are more. Based on some with similar issues, I'm not sure ill be getting another, but I'll see I guess. Thanks again!
I dropped my phone on the road 2nd day of use. The metal edge got scratched, but the phone survived. The only other issue I noticed was twisted body. Looking from the edge, the twisted edge was easy to notice, and surface wobble was also there.
Click to expand...
Click to collapse
Thanks very much for your input! I appreciate it. The body twist and warp (these are better way to describe it, thanks, as the phone isn't so much curved/bent as it, or the single piece back/body specifically, is warped) is quite noticeable with the one I have too (looking at the edge like you said). However, I don't think I've dropped the phone (too hard at least and no visible scrathes, scrapes, etc.) I also keep a phone in a coat pocket, bag, or just take it out and set it down when I'm not out and about, so I don't think I would have caused the warp myself. Thanks again!