hi,
i am still pretty n00b when it comes to android, but i really wanna try and put a custom ROM on my I9000. i recently updated to the official 2.2 firmware via kies.
i've been snooping around and really like the look of Darky's v7 gingerbread edition 2.2.1 custom ROM, i was reading the instructions, and it said you need a kernel with recovery 2e by chainfire. i went on that forum and was looking, and i don't think there's one for my firmware.
my baseband is dtjp3 and build is dtjp5
when i was looking through CF-ROOT files, i couldnt find one that was like mine?
CF-Root-JPH-v1.0
CF-Root-JPH-v1.1
CF-Root-JPK-v1.1
CF-Root-JPM-v1.2-Busybox-1.15.3
CF-Root-JPM-v1.2-Busybox-1.17.1
CF-Root-JP6-v1.2-Busybox-1.15.3
CF-Root-JP6-v1.2-Busybox-1.17.1
CF-Root-JPJPA-v1.2-Busybox-1.15.3
CF-Root-JPJPA-v1.2-Busybox-1.17.1
CF-Root-XX_XEU_JPO-v1.2-Busybox-1.15.3
CF-Root-XX_XEU_JPO-v1.2-Busybox-1.17.1
CF-Root-XW_XEE_JPA-v1.2-Busybox-1.15.3
CF-Root-XW_XEE_JPA-v1.2-Busybox-1.17.1
CF-Root-XX_OXA_JPU-v1.3-BusyBox-1.15.3
CF-Root-XX_OXA_JPU-v1.3-BusyBox-1.17.1
sorry for the n00b question guys, would appreciate if someone could clear this up!
Do you have 3br? If so just flash different rom jpy for example is supported by cf then go to darkys rom this is the route i took.
Related
hello can someone give me some advice what is the best way to flash to froyo
do you need to have a firmware already installed like jm8 for instance or can you
just wipe my phone and install from fresh .
thank you
Just flash JPY from samfirmware.com as a PDA without a PIT file selected.
can i do it even if my galaxy doesnt have a firmware already installed i was wanting
to do it from a fresh wipe then just install the jpy
thank you
i would suggest to flash Darky's Rom. it's easy and you don't need to use odin or heimdall. plus its a really fast Rom!
Sent from my GT-I9000 using XDA App
i was looking into doing that but an i flash without having a firmware already installed
or do i need one already on the phone i have read on a lot of post people saying
you need something like jm8 firmware first then you can flash over it dont know
whats the best way realy
thank you
Kies 2 is the easiest way........... If you want to flash to a custom 2.2 I suggest reading through these forums for a few good hours.
How does your phone work if you have no firmware .???
Suggest A Froyo update is normally via Kies . Why do you need to flash ??
Suggest B If you are flashing custom roms please please read all the posts regarding flashing and save breaking your phone .
Suggest C questions go in the Q& A section not development .
jje
<----- says the best way to flash FroYo if you are a woman is to wear a t-shirt with FroYo stencilled.
Seriously, if you want an official 2.2, try one thats correct for your country & region. General section has a sticky.
If you are adventerous & want to experiment, try one of the MODDED ROMs available. There is a sticky here in dev.
If you want a 2.2.1 without ant modifications, try to search for it here in dev with a title [MOD][CSC] or something or try my desi link in my signature. I will search & add links later.
PS : how old are you?
first, sorry for my english...i'm from chile and i wanna know if i can use the new rom (New Rom - HumberOS-v1.3.0-Americas) on my alaxy tab p1000L. in this moment i have 2.3.3 firmware, kernel 2.6.35.7, overcome v3.0.1-jupiter. pleas i need help cause im noob =(. In this ROM works TV? thanks for all.
No. The thread title says that is a froyo kernel, and your tab is gingerbread.
so i can't change to froyo? srry again... like i said i m noob...thanks
You can go down to froyo to get the tv app, but there is a gingerbread kernel for your tab too. Just look a little farther for it. It is posted by the same friend, Humberos, I think.
Hello,
I want to root my samsung galaxy s I9000, but I dont know what kernel etc I should use.
Firmware 2.3.3
Baseband Version I9000XXJVO
Kernelversion [email protected] #2
Buildnumber GINGERBREAD.XWJVH
Are there any guides/tutorials around that might help me out?
Searched around but couldnt find anything.
Thx already!
I would say in the following thread you will find everything you need It's a Kernel which ist like the stock one and only adds root and CWM. a guide is included in the Thread.. http://forum.xda-developers.com/showthread.php?t=788108
Oke, and after i rooted my phone with the link u provided me, i can install roms etc?
thx!
riecardow93 said:
Oke, and after i rooted my phone with the link u provided me, i can install roms etc?
thx!
Click to expand...
Click to collapse
Yes with cf-root you can instal custom rom
What version of the guides kernel do i need btw? im totally new to rooting my phone.
Thanks for all the help already!
Anyone could help me?
Try rom JW1 and semaphore kernel 2.4.0. I am using this combination and its good .
But can I take a kernel that is a other version, higher then the 2.3.3 that I am on right now? And do I need a kernel thats is build on .XWJVH, or does that not make any difference?
I think you can put the kernel with the newer version, but it will be better as the newer rom and upload to the newer kernel, you will be satisfied.
Im still kinda confused on how to flash/root my phone. Aint there any newbie guide that explains everything and makes it easyer for me to root my phone? And I still dont know if it matters what version kernel i take etc...
Thx!
You're dutch, aren't you?
Just go to androidworld.nl, that's easier for you I think...
You can normally use Kernel's that are close to your rom, but it is recommended to use only those kernels for your rom- as far as I know. Please correct me if I'm wrong!
Can someone please help, i was trying to flash cwm on stock froyo att tab and encoutered an issue, after 48 minutes stuck in Odin i decided to unplug the tab, after this when i started i get the phone..triangle..pc all the links i have found in the forums are old, cant find the 2.2 firmware any link i find has either got the 2.3 firmware or is died This is my baby and i have been dying to get ICS on it and am dying without my galaxy tab
a little bit confuse with your description. try froyo, but dying hard for ics?? and by the way,i have also experienced the same phone-triangle-pc after having trouble to flash jq1 stock rom. after i got the phone-triangle-pc logo,i try with cf root kernel (jq1) and successful. but you said you don't want gingerbread. so.. :-|
i wasnt at the point of flashing a rom yet, i need the kernel for froyo because att never went to 2.3, so i need the stock firmware but cant find an alive download. I was only at the point of using Odin to ad CWM to be able to flash a new kernel or rom
My opinion, still best to head to Overcome thread in dev section.
Gean their Stock Safe rom to restock, and grab their kernel and flash that too, via Odin.
From there you get CWM and your filesystem gets converted to ext4 and you are ready to go for ICS.
Sent from my GT-P1000 using XDA
ok so all his links are down to, the only other stock roms i could find was Rotohammer roms but deodexed.com is down to... im loosing hope everyone got to flash new roms I hope someone out the still has the files needed and can re-upload
I am pretty sure one of Overcome mirror is alive.
Where did you go to?
Teamovercome.net ?
Sent from my GT-P1000 using XDA
I was using the link listed in his forum, the address you gave HELPED OMG your amazing lol...THANK YOU THANK YOU THANK YOU<,, I am now up and running on GB now i should be able to get to CM9 no prob.. Thank you again
awesome i have CM9 up and running, thank you again you have no idea how much i appreciated you helping i was starting to loose hope, i didn't have nearly that many problems getting CM9 up on my Cappy
Hi guys, first of all im sorry if the questions i ask are simple and straight forward, im not used to the galaxy s as i use HTC and my friend wants me to update hes phone and so i want to cover all the basics before i agree and go ahead, from what i know the phone is not rooted and dont know if its locked or not but any sim works with the phone, its currently running 2.1 and i would like to update it to ICS Rom, either of the these two.
Code:
http://forum.xda-developers.com/showthread.php?t=1687727
Code:
http://forum.xda-developers.com/showthread.php?t=1618757
So any help in knowing what software i need to have for rooting the phone and also best way to update to these two roms.
Thanks again for the help..
masantula said:
Hi guys, first of all im sorry if the questions i ask are simple and straight forward, im not used to the galaxy s as i use HTC and my friend wants me to update hes phone and so i want to cover all the basics before i agree and go ahead, from what i know the phone is not rooted and dont know if its locked or not but any sim works with the phone, its currently running 2.1 and i would like to update it to ICS Rom, either of the these two.
Code:
http://forum.xda-developers.com/showthread.php?t=1687727
Code:
http://forum.xda-developers.com/showthread.php?t=1618757
So any help in knowing what software i need to have for rooting the phone and also best way to update to these two roms.
Thanks again for the help..
Click to expand...
Click to collapse
First of all flash the 2.3.3 Gingerbread Stock firmware using odin.From here..(flash the jvt rom)
http://forum.xda-developers.com/showthread.php?t=1102881
Then root using cf root kernel flash again through odin..
http://forum.xda-developers.com/showthread.php?t=788108
Then download the ROM i would prefer ICS333 it is better...
put the zip in storage ...Flash via CWM...Don't forget to wipe
Much thanks...the information you have given me has been great and very helpfull, now i know i am all set..
Thanks again, appreciate it
Sorry but the JVT Rom is just for 2.3.6 and 2.3.5, there isnt any for 2.3.3, just want some clarification.
EDIT:
I got the phone onto GB and flashed new ICS Rom, thanks again for the help and useful links..