Possible froyo leak problem - Captivate Q&A, Help & Troubleshooting

so i just put on the leaked THROUGH ODIN froyo onto my captivate, and i thought yeah its nice but its not as snappy as the other roms
so i put my phone into download mode and get ready to flash it back to stock so i can put on cog or assonace or w.e. i choose
but now my computer (Windows 7 32) won't recognize the phone in download mode anymore! its retarded i don't understanddddddd
first it works now it doesn't. it used to recognize it but now USB DEVICE IS NOT RECOGNIZED or whatever bull**** it spits out...ive uninstalled and installed and restarted and registry cleaned my computer a billion times...
anyone else?

You can try reloading your drivers. sometimes it helps. Or a different usb port. BEFORE you flash back.....you can swap the kernel from dg's cognition 2.3b8 into your phone.....works WONDERS for general snapiness...BUT...the 2.2 leak renders your bluetooth pretty useless......havent tried it since the kernel swap.....anyone know if the kernel swap effects bluetooth? Anyway...entertain the thought

i kno u can change the kernel but i really want to get the bloatware off and voodoo and everything and have a quadrant of OVER 9000!!! lol
but seroiusly wtf samsung...whats going on

I gave up on samsung updates about 3 days after I got my phone. I see a lot of complaining about the bloatware....i personally dont see the big deal....its 5 or so apps and you can just leave them buried in the app folder and install the things you actually use on your home screens...just my 2 cents. BTW voodoo DOES come with the kernel swap...and its awesome!

okay i got the computer to recognize the phone
now odin is being gay...just one thing after another LOL
but anyways...
this is how its going down...
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
and thats where it gets stuck...its not moving past that

rbozzo09 said:
okay i got the computer to recognize the phone
now odin is being gay...just one thing after another LOL
but anyways...
this is how its going down...
Added!!
Odin v.3 engine (ID:5)..
File analysis..
Get PIT for mapping..
Firmware update start..
sbl.bin
and thats where it gets stuck...its not moving past that
Click to expand...
Click to collapse
That could be a problem. If it does not move your only choice will be to pull batery and start again. You are stuck on the secondary boot loader.
Good luck
Sent from my SGH-I897 using XDA App

lol yes it is a problem haha
ideas anyone?
ive tried a few different ODINS and the same thing happens it just gets stuck...
should i clear anything like wipe before flashing to a stock?
do i just press master reset before i flash to stock?

Can you still get into download mode?
Have you tried deleting odin, re download.
I am presuming you have used odin before and this is a new behavior.

mcord11758 said:
Can you still get into download mode?
Have you tried deleting odin, re download.
I am presuming you have used odin before and this is a new behavior.
Click to expand...
Click to collapse
yeah i've used it to every extreme today haha i have a few odins
one to get to stock JH6
one thats a fix for the 3 button combo and stock JH6 (where you have to manually load the pda and pit
and the one that flashed me to the leaked 2.2
the only one that works it the leaked 2.2, but i want to get back to JH6 so i can flash it to the new perception
i don't think redownloading odin will work because i have them all saved in different folders...

I am not sure how to fix your odin problem, but you can swap kernels, then try to flash perception through clockwork.
Just a thought
Sent from my SGH-I897 using XDA App

mcord11758 said:
I am not sure how to fix your odin problem, but you can swap kernels, then try to flash perception through clockwork.
Just a thought
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
lol i would love to know how to do that...
i kno how to install clockwork and get rooted but i dunno how to swap kernels

Just a suggestion...try using a different usb cord. We have a number of different cords (half of which are cheap amazon ones mainly used for charging) and I have seen times where changing cords has solved my headache with communication problems (using adb commands) and odin hanging, even though the same cord worked fine the day before.

Are you rooted
sgs kernel flasher app from market
Get app
Download a kernel.
Open app, back up current kernel just in case. Move kernel to file on your sd that the app creates. Open app select choose kernel click flash kernel.
Sent from my SGH-I897 using XDA App

Related

[Q] odin help - not flashing back to stock

OK, I flashed to a new ROM and would now like to flash back to the stock ROM due to some issues with the new ROM, but whenever I do it, I wind right back where I started, with the flashed ROM, not the stock ROM (2.1). I may have deleted a file that is needed to get back to stock. Is there such a file? I follow all the instructionals and everything works well, it just doesn't flash back to stock?
We would need allot more details in order to pinpoint where you are going wrong.
My best guess is that you are not being recognized by odin, you are clicking start and nothing is happening. How long is the odin flash taking?
CM7
Im using Odin 3 v1.00. With the Captivate, I go into download mode and Odin recognizes it. I get the following
<ID:0/009> Added!!
Then I click start and the list expands to
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Removed!!
It says Reset up top, but when the phone reboots, it just reboots back to the Cognition 4.1.1 that I was running
I had this exact problem last night, I was trying to flash back to stock from a I9000 ROM I had installed and it wasn't running good for me. So I did what I had done in the past, I was using the Captivate ToolBox to flash back to stock, my phone would go into Download mode, but Odin never saw it. I thought that was odd, so I tried the regular Odin flash to stock as well, using the pulling the battery and holding down vol up and down and plugging in the USB. Still Odin didn't see my phone.... I then rebooted my computer, put my phone in download mode and plugged in into my computer and for some odd reason Windows said it was installing new drivers for my device. After it completed, Odin saw my phone and I was able to flash back to stock, so you could try that, it may help you.
EDIT...Oops, sorry not the same deal I had, sorry..
Try different usb port
Make sure odin is open first
Be aware of what build tourer phone is, located under battery something like 1008. If 1010 our higher don't use one click
If box in odin turns yellow and days "com#" then you are recognized if not you are not
Phone must be in dl mode
Correct drivers must be installed
CM7
Beowulf, you commented
YYou need to supply the firmware file to flash (click on the "PDA" button, and browse to where you downloaded it--you *did* download it, right?), and optionally the ".pit" file if you need to re-partition when you flash.
I think you are right, but what would I point to in order to flash back to stock? Where would I get it? I can find what to point to if I wanted to flash to Cognition 4.1.1 or one of the other custom ROM's, but I cant seem to find what file I can download/point to in order to restore to stock ROM.
mcord11758 said:
Try different usb port
Make sure odin is open first
Be aware of what build tourer phone is, located under battery something like 1008. If 1010 our higher don't use one click
If box in odin turns yellow and days "com#" then you are recognized if not you are not
Phone must be in dl mode
Correct drivers must be installed
CM7
Click to expand...
Click to collapse
I believe I installed the correct drivers (that allow me to connect to Odin) as I do get the yellow box and it says 0:[com9]. Phone is in download mode. Also, it says 1008 under the battery.
http://www.samfirmware.com/WEBPROTECT-i897.htm
You need to create an account. Jf6 put listed bottom page
ThaRide said:
Beowulf, you commented
YYou need to supply the firmware file to flash (click on the "PDA" button, and browse to where you downloaded it--you *did* download it, right?), and optionally the ".pit" file if you need to re-partition when you flash.
I think you are right, but what would I point to in order to flash back to stock? Where would I get it? I can find what to point to if I wanted to flash to Cognition 4.1.1 or one of the other custom ROM's, but I cant seem to find what file I can download/point to in order to restore to stock ROM.
Click to expand...
Click to collapse
CM7
I wound up following teh lead that Beowulf gave me as I was using the full blown Odin and not the 1 click. When I watched videos on how to flash back to stock, I did wonder why teh version I was using looked different. I had assumed that it was just a slightly newer version.
To make a long story short. Once I used the 1 click Odin, I flashed back to stock easily. Thanks to all for your help. Much appreciated.

Help with Soft brick GALAXY S

Hey guys i have followed the guides , i was putting on a stock rom for my phone to be sent back as a replacement. it failed half way through the flash when i upgraded the phone to 2.2
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.rfs
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can get back into recovery mode. I tried flashing it with the PIT PDA and CSC file. It fails constantly, i clicked re partition in one flash too it didnt work either. SO i am stuck. Any other suggestions?
Using odin 1.3 - It worked the multiple other times i flash it to different roms.
Maybe you're using Windows x64? try using another version of Odin, possibly 1.7 & make sure when you open it to go to the correct pit file & not the last one opened, also if the phone is going back do a wipe/factory rest too in recovery mode & then try reflashing with Odin, hope that helps.
Hi i used a windows XP machine with the same results. I did try 1.3 and 1.7.
is there another PIT file i can try? I downloaded a couple and neither worked.
I have no recovery anymore only download mode, the phone does not boot at all no phone -> computer icon.
Is the 512 PIT file the right one for the galaxy thought it was.
Have you tried redownloading the firmware? Or another source for the same firmware? Maybe its corrupt somehow. I know it is supposed to check the md5 but worth a shot. Or try an earlier version of your firmware, if it is for return they shouldn't care.
G
I have tried 3 - 4 different roms with all the same result, the phone was going back under a different issue (network related). It always fails at the same point from each rom.
Steps i have done.
1. pit file only (repartition)
2. pit pda and csc (512 pit , vodaAU stock rom, voda au csc)
3. standard stock rom (which worked) but doesnt now.
4. Darkys resurrection rom (failed same spot)
5. odin 1.3 and odin 1.7
6. windows 7 and windows XP
I am annoyed about this, the other times worked fine! Just went i went to send it back for replacement . boom failed.
I tried a more recent ginger rom, failed again act factory.rfs. It's almost like the internal SDcard is broken. This time it flashed modem.bin
Did you remember to turn off the lagfix before the first flash? If the file system is ext4 and you flash RFS then I think that you can have issues.
There is a way to fix it as I was on another thread today where that was the issue but I don't know if the error showed up in Odin for them.
Just another thought...
G
BTW I think in most cases odin will still flash OK even if SD card is cooked. We i9000m owners know way too much about that...
After google search you also might try 1) another odin or heimdall - personally I'd try heimdall at this point if I were you or EZ odin maybe? 2) You likely know not to have kies agent in the tray but hey worth mentioning 3)redownload drivers (which I'll guess that you've done too)
Hi mate ,
Yes i did disable lag fix before flash i kept the orig rfs file system did not convert to EXT4. I might try Heimdall.
After google search you also might try 1) another odin or heimdall - personally I'd try heimdall at this point if I were you or EZ odin maybe?
2) You likely know not to have kies agent in the tray but hey worth mentioning
All taskmanager escaped all the kies stuff, reinstalled kies as well.
3)redownload drivers (which I'll guess that you've done too)
Did this on two machines.
EZ odin fixed it. It booted i just put my providers CSC on it, im pretty sure they wont check the base band and rev number when they get it back.
Glad it worked!
G
Sent from my GT-I9000M using XDA Premium App

Error when flashing Clockwork Recovery - Screenshots included

I was most recently running Andromeda 3 (Froyo 2.2) when I decided to upgrade to Gingerbread. I intended to go to Cognition 5 v2 (This tread: http://forum.xda-developers.com/showthread.php?t=1127578). Step one was to be on Gingerbread and because I was running Froyo, I followed the link (This thread: http://forum.xda-developers.com/showthread.php?t=1127249) to flash Gingerbread stock.
Using odin3 v1.81 and the zImage-root.tar file, I put my phone into download mode, installed rebooted and then added the kernelKF1.tar file. The Cappy rebooted and I was running a rooted stock 2.3.3. This is where the main problem lies. Step two for Cognition was to use Clockworkmod Recovery to flash the new kernel – usually extremely easy but this time I received an error (see below). I believe the error is because I was upgraded to Android System Recovery <3e>, which produced an error anytime I try flashing clockwork recovery mode or using the update.zip method.
The error is “E: failed to verify whole-file signature. E:signature verification failed. Installation aborted”.
I tried to use the “2e recovery” method (http://forum.xda-developers.com/showthread.php?t=804226) however, Odein3 v1.81 receives the error:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
At this point, I’d be happy just to be able to go back to a Froyo cooked ROM but cannot.
Current:
Firmware version: 2.3.3
Baseband version: I897UCKF1
Kernel version: 2.6.35.7-I897UCKF1-CL273832
Build number: GINGERBREAD.UCKF1
Step 2 ... use the Odin to flash the latest Cog Kernel (use the .tar kernel) then Step 3. Don't use the .zip kernel. Don't use Rom Manager.
And last, get a fire extinguisher, ... U should have posted this in Q & A. So u may get flamed.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
For2ndtwin said:
And last, get a fire extinguisher, ... U should have posted this in Q & A. So u may get flamed.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Oh ****. :/ I thought I was in Q&A. Entirely too many tabs open.
Odin is now stuck on:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
Maybe close Odin, unplug ur phone from computer, restart Odin, pull battery from phone, replace, put back in download and retry flashing .tar kernel.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Btw, since u have gone gingerbread and have the i897 bootloaders, don't go flashin the 3 button fix odin or you will be hard bricked. Didn't know if u knew this so i thought i'd mention it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
cliffgardner said:
Oh ****. :/ I thought I was in Q&A. Entirely too many tabs open.
Odin is now stuck on:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
Click to expand...
Click to collapse
I've encountered the same problem as you do too. It's due to "not sure why".
But, it's fixed by below:
Download, http://forum.xda-developers.com/showthread.php?t=1127249
It's Odin 1 Click to STOCK Gingerbread Captivate.
Turn ON the Odin 1st.
Make sure your phone haven't plug into the PC and make sure your phone is OFF.
After that, CLICK and HOLD the VOLUME UP + DOWN BUTTON. Then, plug in the USB that's connected to your PC.
Once you see the Odin recognize your phone, quickly click START! If you got too slow, you'll not able to flash. PLEASE BE FAST.
Odin One-Click back to stock
KF1 Stock One Click (in the cog thread)
Flash v2 Kernel using odin
Flash Cog 5 via CWM
For2ndtwin said:
Btw, since u have gone gingerbread and have the i897 bootloaders, don't go flashin the 3 button fix odin or you will be hard bricked. Didn't know if u knew this so i thought i'd mention it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I'm glad you did mention it. Luckily, I never had any issues with the button combinations.
nygfan760 said:
Odin One-Click back to stock
KF1 Stock One Click (in the cog thread)
Flash v2 Kernel using odin
Flash Cog 5 via CWM
Click to expand...
Click to collapse
Will I be able to flash using CWM after flashing v2 Kernel with Odin?
Update I see that it does give me clockworkmod recovery 4.4.
Update to the update
I'm up and running Cog 5.2 and loving it. I was having a ton of issues with Odin but in the end, I flashed Eclair stock, then Gingerbread stock, KF1, Kernel 2, then Cog through CWM (that was put on during the Kernel 2 update it seems).
Thanks for the help and sorry for posting in the Dev instead of Q&A.
Good deal. Glad u got it goin.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
cliffgardner said:
Will I be able to flash using CWM after flashing v2 Kernel with Odin?
Update I see that it does give me clockworkmod recovery 4.4.
Update to the update
I'm up and running Cog 5.2 and loving it. I was having a ton of issues with Odin but in the end, I flashed Eclair stock, then Gingerbread stock, KF1, Kernel 2, then Cog through CWM (that was put on during the Kernel 2 update it seems).
Thanks for the help and sorry for posting in the Dev instead of Q&A.
Click to expand...
Click to collapse
On a side note Avoid using 1 clicks with bootloaders. With I897 GB bootloaders there isnt need to downgrade back to eclair bootloaders. So look around there are a ton of 1 clicks and firmware packages with out the bootloaders. It only flashes for a split second but might as well reduce the risk even more ^^ best of luck with cog 5
cliffgardner said:
Will I be able to flash using CWM after flashing v2 Kernel with Odin?
Update I see that it does give me clockworkmod recovery 4.4.
Update to the update
I'm up and running Cog 5.2 and loving it. I was having a ton of issues with Odin but in the end, I flashed Eclair stock, then Gingerbread stock, KF1, Kernel 2, then Cog through CWM (that was put on during the Kernel 2 update it seems).
Thanks for the help and sorry for posting in the Dev instead of Q&A.
Click to expand...
Click to collapse
No problem. Hey, you might wanna check out the Sheer Brilliance theme, I had it on Cog 5, and I loved it.
nygfan760 said:
No problem. Hey, you might wanna check out the Sheer Brilliance theme, I had it on Cog 5, and I loved it.
Click to expand...
Click to collapse
+1 I only ran cog for a few days to compare battery life but that theme made it way more bareable coming from MIUI.
Sent from my i897 running MIUI 1.8.19 with TalonMTD kernel.

Need urgent help..

Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
happy20b said:
Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
Click to expand...
Click to collapse
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
prbassplayer said:
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
Click to expand...
Click to collapse
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
happy20b said:
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
Click to expand...
Click to collapse
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
prbassplayer said:
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
Click to expand...
Click to collapse
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
happy20b said:
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the reply.. But i am not aware of 1 click Kh4 no bl method.. even googling din help me.. Could u please point me to the link?
Thanks..
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
OMG how I miss that....
prbassplayer said:
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I was able to unbrick the cell using onc click unbrick method.. Now i can go to download mode by pressing volume up + down and connecting microusb cable..
If i Boot normally then it will show AT&T screen and will get stuck over ther
If i try to boot to recovery ( I had flashed clockworkmod recovery) then It will display AT&Screen for few seconds and goes off and again comes and goes of.. and this continues...
I am not able to use odin to download any image.. I dont know how to proceed now..
Is it possible to flash clockwordmod recovery from download mode ?
Thanks
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
happy20b said:
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
Click to expand...
Click to collapse
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
prbassplayer said:
OMG how I miss that....
Click to expand...
Click to collapse
prbassplayer said:
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
happy20b said:
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
Click to expand...
Click to collapse
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
happy20b said:
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
Click to expand...
Click to collapse
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
prbassplayer said:
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
happy20b said:
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
Click to expand...
Click to collapse
You probably just flashed froyo boots, so the GB ones would be necessary for GB.
And yes, stock froyo doesn't allow unknown sources.
Swyped from my ICS Samsung Captivate

To Bricked or not to be bricked

Hello all,
I have a sg-n7000. And i was trying to put another rom on it.
I downloaded odin mobile because the pc odin did not past further then ''zimage''.
I selected abys kernel. (i have a lpy kernel on android 4.03. this is ICS?)
after i executed the file, my note restarted. And didn't past the samsung boot screen.
it's still possible to enter download mode & clok workmod recovery v5.8.1.5. (entered by pressing volume up, home and power button)
I went to cwm and selected wipe data. it's still possible to enter cwm and download mode.
But i don't know what to do, to recover to a working phone. At this point it doesn't matter to me if it's going back to stock rom or to custom rom. As long as get's back to live.
Please who can help me.
many thanks
bearhunt said:
Hello all,
I have a sg-n7000. And i was trying to put another rom on it.
I downloaded odin mobile because the pc odin did not past further then ''zimage''.
I selected abys kernel. (i have a lpy kernel on android 4.03. this is ICS?)
after i executed the file, my note restarted. And didn't past the samsung boot screen.
it's still possible to enter download mode & clok workmod recovery v5.8.1.5. (entered by pressing volume up, home and power button)
I went to cwm and selected wipe data. it's still possible to enter cwm and download mode.
But i don't know what to do, to recover to a working phone. At this point it doesn't matter to me if it's going back to stock rom or to custom rom. As long as get's back to live.
Please who can help me.
many thanks
Click to expand...
Click to collapse
Just try and enter download mode and flash stock rom. You gonna be alright, trust me.
Aluyi said:
Just try and enter download mode and flash stock rom. You gonna be alright, trust me.
Click to expand...
Click to collapse
Ok, does it matter which stock rom. because i had the lky kernel.
1. I'm downloading now "N7000XXLPY_N7000XENLP1_XEN.zip" on http://forum.xda-developers.com/showthread.php?t=1424997
is this a good one?
So long as its stock it shouldnt matter, You should try to get the original one your phone came with, Or as close as possible.
I believe the issue is the kernel, You could try to flash another one before going down the route of restoring to stock.
Give speedmod a try, if it fails to boot still, then flash stock GB
azzledazzle said:
So long as its stock it shouldnt matter, You should try to get the original one your phone came with, Or as close as possible.
I believe the issue is the kernel, You could try to flash another one before going down the route of restoring to stock.
Give speedmod a try, if it fails to boot still, then flash stock GB
Click to expand...
Click to collapse
Ok, my note came with gb. And was updated by KIES.
And it has the lpy kernel. I believe this one was a unstable version.
In odin i get this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
and it hangs on zimage. doesn't more.
What now.
how long has it been stuck like that for ? if anything was to fail it would be datafs or factoryfs. Its weird that its sticking on the kernel.
Have you tried to flash stock kernel in ODIN, and then the firmware on top ?
azzledazzle said:
how long has it been stuck like that for ? if anything was to fail it would be datafs or factoryfs. Its weird that its sticking on the kernel.
Have you tried to flash stock kernel in ODIN, and then the firmware on top ?
Click to expand...
Click to collapse
the first time i used odin, downloaded abys kernel as it would be a safe kernel. It hung for 45 min.
the second time, i downloaded the N7000XXLPY_N7000XXLPT_N7000XENLP1_HOME.tar.md5. And it hung.
And if i'm right i cant put that file on de sd card and install from cwm.
close KIES and try again with pc odin.
praetorius said:
close KIES and try again with pc odin.
Click to expand...
Click to collapse
i'm on a different computer without KIES. I installed samsung usb driver.
Ok,
i downloaded the stockrom.
Went to annother pc.
Started odin up.
Selected the downloaded tar file with the pda button.
did select only reboot & reset time.
hit start.
it went further now. But in the end. odin gave a red flashin fault.
Is it now bricked?
Could be a communication error with the device...
As mentioned Hard brick would usually hang on FactoryFS or Data..
Try rebooting your PC
Use an alternate USB port and retry..
Hi all,
Thanx all. I managed to get a gb xxkk5 running on the note.
I went to another computer.
And used odin.
selected:
- pit file (downloaded from here)
- stockrom (downloaded from sammobile)
removed sd card and sim card.
hit start.
Now he is in configure mode of a new samsung account.
Again, thanks.

Categories

Resources