Hi all,
I recently tried upgrading my Samsung Galaxy S from Eclair to Froyo through Samsung Kies, but however it would not move past 1% for a long time (1 hour?), and would not cancel the update so had no choice but to disconnect my USB. Since then, it would only show the Phone ! Computer sign.
I bought myself a jig which set it on into download mode. First I accidently hit start on Odin without loading any firmware which kick started my phone back to how it was before this accident. I then downloaded the I9000XWJS3|2.2.1|2011 January (not actually knowing the stock firmware type on my phone). I loaded the file as a PDA, and got a Pit file, 512. No luck it would not load. It would get stuck and modem.ini or something like that. After a few tries of unplugging, using jug and replugging back to usb, I tried again, but Odin accidentally started up with "re-partition" aswell and after loading the PDA file and PIT file I clicked start with repartition ticked.
Since then the phone won't even start, even plugged into a charger, not even the Phone ! Computer sign anymore. Just a blank screen. However using the Jig still puts it in download mode, but since my Phone is of the o2 network (UK), Ive even tried downloading and trying to flash Eclair firmware, I9000XXJM1, by loading the 512 pit file, loading the PDA, Phone and CSC files. Again, nothing, it gets stuck at:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.rfs
and thats it, the blue bar on my phone moves a little, but gets stuck at factoryfs.rfs.
I literally have no idea what to do anymore and I feel I may of taken more than I can chew and worried I have perma bricked my phone or corrupted something. Should I send it in to Samsung for repair? Will they even repair it or be able to? My phone wont start up at all, and when I say that I mean you hold the power button and nothing comes on. It's not like before, not even the Phone ! Computer sign shows or anything, its just black. They only way I can get anything out of it is by plugging the Jig, which puts it in download mode.
Any idea's or help would be GREATLY appreciated.
PS: I tried runing Odin 1.3 in admin mode and under XP service pack 2 compatibility, no luck!
http://forum.xda-developers.com/showthread.php?t=853950
TRY
jje
Thanks but that post is for the firmware [JL2] Bell I9000M, which is for the samsung vibrant. I have the bog standard Samsung galaxy S. I'm not sure it will flash.
Any more advice and information really REALLY appreciated!
http://forum.xda-developers.com/showthread.php?t=818556
Odin section
jje
Nope even tried that post and downloaded the firmware, did exactly as he instructed. Phone is in download mode, the blue bar goes the same distance (like 2mm full) and stops for the rest of the time.
It gets stuck on:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9000XXJPU-REV03-PDA-low-CL747761.tar.md5 is valid.
<OSM> MODEM_I9000XXJPU.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJPU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
Related
Hey guys, I don't know if this is the right place to post, I'm new so go easy on me!
so today i tried to go downgrade my phone to eclair 2.1. I was currently using a custom rom (miui) with CM7
i went on odin i used a pit 512 file "s1_odin_20100512.pit"
WHILE i was flashing my galaxy s, my computer shut down! when i tried to turn on the phone it didnt want to start.
I STILL have access to the download mode when i try several times the vol down, home, and power button combo
So i would like to know if i have an hope to make work my phone again and recover from this issue.
1st-why the hell would you like to downgrade your phone to eclair?
2nd-use a full rom with repartition -for example js8 full or jpu- with odin and 512 pit. make sure that your computer doesn't shut down again
note: while your computer shuts down while you were flashing boot.bin, sbl.bin or param.lfs your phone will be worth paper weight. so be careful.
Thanks for the quick reply! Do you maybe have a link where i could download that jpu rom?
go to samfirmware.com
you will need to sign up, but it's free, so it will take you 2 minutes to complete
So i downloaded a I9000XX JPU firmware, I used a pit 512 file but i think that i got an other probleme. here's the Odin log
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
Im stuck at Setup Connection, 10 minutes laters nothing happened yet.
setup connection, means its having trouble connecting to your phone, make sure KIES is not running, try another USB port, one that goes direct into the motherboard of the pc. and try again
you should be ok
Also run Odin as Administrator if you're on Vista or Seven.
Thanks a lot for your help! yes you were right i had to restart odin to make it work
Hello Friends!
I have bricked my s5830i ace, while I wanted to return to stock with odin. Unfortunately I didn't check USB debugging, so I couldn't flash it.
The problem is the following:
-Usb debugging isn't checked=>Can't flash=>Can't unbrick
Please help me! If i connect the phone to the first USB, odin says: Operation(Write) failed...or something...I can't try now.
Or when I connect to the second USB, odin says: Connecting(or something like that) and stucks...
Please help me! I'm very nervous, and I don't want to bring it to service!
You're my last hope
(If you need details, I could have a look at flashing process, and messages)
Well, how did you brick it? Seems like you flashed the wrong firmware (a firmware for 5830 without the 'i')
If that's the case and odin is stuck at setting up connection, then bad luck. A jtag (if you know someone with one) or service center are your options.
I'm sad to hear that. I wanted to flash the official 2.3.6 from samfirmware. If I know well, I should use Odin 1.84, or 1.85 and the file, which I have downloaded should be under PDA section...
Does your ace still go into download mode?
If so, it might be fixed by flashing the correct firmware.
Make sure to have your firmware in your pc root (C:/) since i've read that it helps.
I've put the correct firmware (Samfirmware S5830i Hungary Telenor)...It boot into download mode without any problem. I haven't tried to put the md5 file to the root, but I will try it soon. Thanks. I hope It's a good idea.
But I think I should check USB debugging in settings, but I can't do this, because It's bricked
coda00 said:
But I think I should check USB debugging in settings, but I can't do this, because It's bricked
Click to expand...
Click to collapse
As far as I'm concerned, usb debugging doesn't matter when flashing via odin. Edit: confirmed, since in download mode the system isn't loaded, there's nothing to debug.
Most odin problems occur when using wrong firmware, wrong .ops file or filename, when drivers aren't installed, or when not running odin as admin.
Okay....nothing worked.
I've tried everything, which you've said.
Odin write me every time:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That's all...I tried everything...maybe my last chance is the service
OK.....news...
I've tried to remove the Rafael.Baugis kernel, and I got new message from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> BcmCP.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> boot.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> system.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WOW...
Problem solved
I've found a multi package here:
http://forum.xda-developers.com/showthread.php?t=1822109
It helped me...my phone is unbricked again
And of course I've flashed the stock rom too.
I'm new here and I couldnt find a thread which had the same problem as me solved so here we go!
I tried manually installing the official jellybean firmware on my N7000 following the steps exactly (usb debugging on, download mode etc) Once I started to run Odin everything was fine until a massive FAIL occured. This is what Odin said
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000ZSLM5_N7000OZSLM5_N7000XXLSO_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Anyway now my phone won't start, it will turn on and but it gets stuck on the Samsung Logo, I booted it into recovery mode, wiped cache, user data and rebooted but it was still stuck on the Samsung logo. How do I fix my phone from here??
Have you installed the drivers on your pc?
64 bit - http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32 bit - http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Install the driver and then try again
Sent from my GT-N7000 using Tapatalk 2
check if kies is running.. close it from task manager... run odin as admin.. aslo before flashing again.. you need to power off and reboot into download mode
Thank you!!
Thanks, that's what I hadn't done, install the drivers. All working good now and have to say its great to finally have jellybean on it!
Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...
Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though
have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i have a odin recovery for recovery and boot just message me on aim: assassinanex or facebook: lane.wiscombe or yahoo: [email protected]] or [email][email protected]
Snowwulfe said:
Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...
Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though
have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you are an idiot.. you brivjed your phone flashing a recovery that is not for this phone.. why don't people read before leaping.
Sent from my SGS 4
@Snowwulfe Tried factory reset in recovery?
Sent through time and space from my s3mini/CM10.2
successful unbrick
I just unbricked my sm-g730a. you need a 2nd phone that is working, some downloads, and short 2 pins on motherboard.
Worked if your still interested...
I have a Note N7000, It is rooted with Philz Touch 5. I had issues with it last friday where it would restart when trying to start any random app.
Thought it weird, maybe it's the last app to be put on - but no. Went into the phone and cleared the cache in Philz Touch 5. After this the phone would not start again.. much to my disappointment.
I have downloaded Odin3 v1.87 and have downloaded the attachment from this thread. http://forum.xda-developers.com/showthread.php?t=1354888
i have also purchased a JIG from this Ebay ad. http://www.ebay.co.uk/itm/141209048811?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The JIG doesn't work, ODIN can read my phone when it's plugged in - and has successfully done the PDA & BOOTLOADER tasks.
I hope & feel that I can bring my phone back to life - I would someone to help me to understand what next steps I can take to do this.
Thanks for all your help in advance..
Can you boot into recovery?
Azeazezar said:
Can you boot into recovery?
Click to expand...
Click to collapse
I unfortunately can't get it to do anything.. I am hoping there's something I can do that i haven't tried.
marmyte said:
I unfortunately can't get it to do anything.. I am hoping there's something I can do that i haven't tried.
Click to expand...
Click to collapse
What the PDA and bootloader task? How did you do it?
nokiamodeln91 said:
What the PDA and bootloader task? How did you do it?
Click to expand...
Click to collapse
Used C:\Users\Stev\Downloads\removeyellowtriangleNEW\2-ZSLPF.tar for BOOTLOADER
And C:\Users\Stev\Downloads\removeyellowtriangleNEW\1.tar for the PDA
All went well -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Used Odin3 v1.87
EDIT
I just noticed those files are from triangleaway. NOT the stock rom. What you flashed is to remove the big yellow triangle at boot.
Download Stock GB or Jellybean, and flash those with odin. That should fix your phone.
Can you put me in the right direction for the stock roms, I've tried a download for uk vodafone but it goes to hotfile with a warning message
Thanks.
marmyte said:
Can you put me in the right direction for the stock roms, I've tried a download for uk vodafone but it goes to hotfile with a warning message
Thanks.
Click to expand...
Click to collapse
Why did you even flash those files? Go to www.sammobile.com and download a firmware. Then flash it using Odin. Just use the PDA tab to flash the rom.
It failed, can i try to flash with an older rom?
You can flash any rom from that site. i recommend avoiding the ICS roms though.
marmyte said:
It failed, can i try to flash with an older rom?
Click to expand...
Click to collapse
How where why?
Using Odin3 v1.85
It gets to this stage and... How long does it take?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
marmyte said:
Using Odin3 v1.85
It gets to this stage and... How long does it take?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Click to expand...
Click to collapse
There is some connection problem with phone and PC.. so kill all kies processes.. run odin as admin.. reboot into download mode and try again.
killed all kies processes.. run odin as admin.
Got this..
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help please:crying:
marmyte said:
killed all kies processes.. run odin as admin.
Help please:crying:
Click to expand...
Click to collapse
Flash a tar version of Philz kernel like XXLTA or DDLSC. using odin. The power off the device and boot into recovery. This should get you into CWM. Format system, data, cache and preload. Then reboot into download mode and flash this rom again OR you can flash any custom TW or CM rom.
I'm really sorry, but I don't understand what you've just said - can you make it any easier for a novice like me
marmyte said:
I'm really sorry, but I don't understand what you've just said - can you make it any easier for a novice like me
Click to expand...
Click to collapse
go to this link and in post 3.. there is download for TW kernels. download the latest tar version.
boot the phone to download mode and select the tar kernel in PDA and flash it. Odin will say KERNEL.. If it completes. power off the device and try to boot into recovery.
Odin successful - but can't boot into recovery..
marmyte said:
Odin successful - but can't boot into recovery..
Click to expand...
Click to collapse
Why not? Power off the device. In fact remove the battery for a couple of seconds.. Then put it back. Press volume up home and power together till you see the N7000 logo and let go..
Tried it.. Nothing happens - but i can touch the screen and it'll vibrate?