Hi there,
I have tried today to make the Goldcard with Y-Cable.. All worked fine it jumped from Host to DIAG Mode. Suddenly it switched off and now it turns anyway only in HOST Mode. I cant switch it on and it wont Update through the SD Card after renaming the RUU_Signed.nbh to SCHUIMG.nbh. It shows only "Loading...".
The SD Card is 2GB
Hardreset wont work too..
Anybody who can help me?
PD29100 SS-BC (4K)
SPL 1.23.2250.0(112138)
Related
i'v boght this device from afrend how dont have no idee abut it its dead one but i can go in to the bootloader mod where it show serial on top and down on the screen v0.17 when i connect it to the pc its give USB on top and v0.17 so according to me bootloader is ok now i try to flash the rom with defrent version its stopt on 62.7% and on the screen of the device shown 50%. is there any way to reflash my device and get it back working.
You can try to load the flash from SD card.
How to update using memory card ?
Thanx !
About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!
Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!
looks pretty much the same like my trinity right now...
help would be very appreciated
Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry
Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::
Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)
Hi guys
Originally i had a HTC touch pro 2 from Vodaphone with win6.1 i tried to put the new energy rom on by following the guide here:
(flashing via activesync)
http://forum.xda-developers.com/showthread.php?t=550540
with this
ROM:
EnergyROM_21876_RHOD500_24.Nov.2009_Standard
it goes past the start up screen "Touch pro 2" and then it stops on with a white background, at the bottom of there screen it displays
B 80
R 4.49.25.17
P 61.44tc.25.32U
D Energy ROM
the multi colour screen info shows
RHOD100 32M ss-BC
SPL -0.85.0liNex
MicroP(LED 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
508,533 800,851
800,208 209,208
217,852 CALIBRATED
can someone help me recover this plz its a new phone
Thanks in advance
once at that final screen,
plug in usb
once your computer has installed drivers, it will say usb instead of serial at the bottom of the phones screen.
try flashing again,if that fails try a different rom or redownload, its not bricked your at bootloader
if you still struggle use the search feature of this site, you will find everything you need
cheers steve
rosebud said:
once at that final screen,
plug in usb
once your computer has installed drivers, it will say usb instead of serial at the bottom of the phones screen.
try flashing again,if that fails try a different rom or redownload, its not bricked your at bootloader
if you still struggle use the search feature of this site, you will find everything you need
cheers steve
Click to expand...
Click to collapse
or try flash using SD card
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
cheers
indra9110
Pheeew thats a relief panic mode off now
Thanks rosebud and indra9110 for your fast replies, I got it working rosebud's way.
I downloaded the rom again and it works perfect now,
I've also got iskoot working (which was NOT working on the vodaphone 6.1 rom)
Thanks again guys
Glad to hear your phone has come back to life
Hy all
I wanted to flash my winphone 7 with a custom ROM. I tried several things as I had no idea overall. This included some DFT executables and some RUU_Schubert_HTC_Europe_xxxxx.exe files.
As none of them were working, I tried to find out why and just figured out, I was using the wrong files to update my phone. As I now have (imho) the right file (RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_by_ansar.zip) that could patch my phone, one of the earlier files has broken my SPL somehow.
When I boot into the bootloader (vol down) the part at the bottom with the white background doesn't show the connection method anymore at all.
It doesn't even say serial when not connected via USB cable. I also tried removing the SIM card without success.
Is my phone broken now? Meaning can I not flash it anymore?
My Windows 7 also does not recognize the phone while in bootloader mode. Before, everytime I attached the phone via USB cable in bootloader mode it recognized it...
Here are my "bootloader" details:
--------
PD29100 SS-BC (4k)
SPL-5.11.2250.0(134578) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
F400
--------
There's no SD card slot on my HTC HD7.
Thanks alot for your efforts!
Best,
Oli
oliiix said:
Hy all
I wanted to flash my winphone 7 with a custom ROM. I tried several things as I had no idea overall. This included some DFT executables and some RUU_Schubert_HTC_Europe_xxxxx.exe files.
As none of them were working, I tried to find out why and just figured out, I was using the wrong files to update my phone. As I now have (imho) the right file (RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_by_ansar.zip) that could patch my phone, one of the earlier files has broken my SPL somehow.
When I boot into the bootloader (vol down) the part at the bottom with the white background doesn't show the connection method anymore at all.
It doesn't even say serial when not connected via USB cable. I also tried removing the SIM card without success.
Is my phone broken now? Meaning can I not flash it anymore?
My Windows 7 also does not recognize the phone while in bootloader mode. Before, everytime I attached the phone via USB cable in bootloader mode it recognized it...
Here are my "bootloader" details:
--------
PD29100 SS-BC (4k)
SPL-5.11.2250.0(134578) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
F400
--------
There's no SD card slot on my HTC HD7.
Thanks alot for your efforts!
Best,
Oli
Click to expand...
Click to collapse
If you can go to tri color and in usb mode try this link http://forum.xda-developers.com/showthread.php?t=1337781&page=4
Hope it works.I bare no resposibility If you brick your device.
---------- Post added at 09:01 AM ---------- Previous post was at 08:54 AM ----------
Firstly you need to Unlock your device, then using RSPL(recommended) then you follow the link that I paste.
I have HTC HD7 PD29100 half bricked.
After power phone on, phone starts and then it stuck on HTC logo with 7 time vibrating.
Every RUU that I try to flash I get error 226.
I'm able to enter bootloader.
Also I'm able to enter USB HOST MODE.
I made y-cable.
Now I have problem with update fail errors while flashing over y-cable and gold card.
I try with six diferent RUU_signed.nbh files that I extract from ROMs. But no lucky.Always same error.
What else could I try I dont have more idea?
Thanks
FAIL!!!
Maybe you can try a 1.X or 3.10 ROM
Also remember to rename the RUU to SCHUIMG.NBH (uppercase), and use a 1GB card.