Database Develop

SOLVED! Bootloaders as far as it goes...Will not load any flash with SSPL or HSPL.

About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!

Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!

looks pretty much the same like my trinity right now...
help would be very appreciated

Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.

steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry

Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::

Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)

HD7 jumps to HOST MODE

Hi there,
I have tried today to make the Goldcard with Y-Cable.. All worked fine it jumped from Host to DIAG Mode. Suddenly it switched off and now it turns anyway only in HOST Mode. I cant switch it on and it wont Update through the SD Card after renaming the RUU_Signed.nbh to SCHUIMG.nbh. It shows only "Loading...".
The SD Card is 2GB
Hardreset wont work too..
Anybody who can help me?
PD29100 SS-BC (4K)
SPL 1.23.2250.0(112138)

[Q] Help I need to unlock.

I can unlock This HTC HD 7 8GB T9292?
Can I install a Rom?
Can i launch rspl and install hspl?
About phone:
Name:HTC HD 7 T9292
Model:HTC HD 7 T9292
Software:Windows phone 7.5
Storage:7.20gb
OS version 7.10.7740.16
Firmware revision number:2250.21.51004.401
Hardware revision number:0002
Radio software version:5.71.09.02a_22.51.50.21U
Radio hardware version:A.102.0.D4
Bootloader version:5.10.2250.0(132968)
Chip SOC version:2.2.5.0
OSPL MODE:
PD29100 SS-BC (4K)
SPL-5.10.2250.0(132968) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
F400

see the tutorial i wrote, link in my signature.

Nothing happen!
When I open ROMUpdateUtility.exe
1)I click i understand.....
2)click I complete...
3)Then please wait...
4)Then ERROR [260];CONNECTION
Check for following:
1:The PDA Phone is connected to the USB cradle/cable.
2:The USB cradle/cable is connected to the PC
WHAT THAT MEAN ALL ARE CONNECTED! I dont now what to do

make sure the *.nbh is in the same folder as ROMUpdateUtility.exe
also, device must be in Bootloader. power off device -> hold volume down -> power on device

Ehhh!Nothing!
I think I sell my HTC HD 7
Thanks you!

i have the same problem, but i dont wana to sell my phone,what i have to do?

[Q] romupdateutility.exe doesnt detect hd7

as it says in the title active sync and windows mobile device center doesnt work either allthough it was advised in some threads any advice thanks

Are you sure your bootloader isn't halfbricked?

JamesKroll said:
Are you sure your bootloader isn't halfbricked?
Click to expand...
Click to collapse
it was halfbriked because of trying to rspl with spl 4 but the got a update which gave me spl 5 so now its not halfbriked am i right do u know a way around this

Can you send me a picture of your SPL?

JamesKroll said:
Can you send me a picture of your SPL?
Click to expand...
Click to collapse
hi there sorry for the bad pics
pd29100 ss-bc (4k)
spl-5.10.2250.0(132274) mng
microp(led) 0x07
touch s1 (v1.8,#1624
sd sandisk 15193mb
partition info-v211v413
f400
heres what it says just in case pics r too bad

Is there anything in the white bar, it should say "Serial" or "USB" if it doesn't than it is still half bricked and you should follow the attached guide to build a Y-Cable and the GoldCard thread.
GoldCard thread>> http://forum.xda-developers.com/showthread.php?t=893152

JamesKroll said:
Is there anything in the white bar, it should say "Serial" or "USB" if it doesn't than it is still half bricked and you should follow the attached guide to build a Y-Cable and the GoldCard thread.
GoldCard thread>> http://forum.xda-developers.com/showthread.php?t=893152
Click to expand...
Click to collapse
i have spl 5 thats y there is no usb/serial message and i have y cable and goldcard but when i plug my phone in and plug usb flash drive in it says loading then reboots then loading then reboot and never actually boots the goldcard or rom file just loading then reboot any advice i left my phone and it dd this process for 20 mins just rebooting and loading only loads for two secs by the way then reboot

I think any SPL version has the "USB/Serial" But I'm not sure. When you use GoldCard method you do go into USB Host Mode right?
Your SD Card is GoldCarded right?
---------- Post added at 12:16 PM ---------- Previous post was at 12:11 PM ----------
Did you say you used USB Flash Drive??? You have to use a GoldCarded SD Card

JamesKroll said:
I think any SPL version has the "USB/Serial" But I'm not sure. When you use GoldCard method you do go into USB Host Mode right?
Your SD Card is GoldCarded right?
---------- Post added at 12:16 PM ---------- Previous post was at 12:11 PM ----------
Did you say you used USB Flash Drive??? You have to use a GoldCarded SD Card
Click to expand...
Click to collapse
i dont fink spl5 does any way yh i go into usb host mode vol down and camera button and yh i have 4 gb usb flash drive and i put ruu.signed file and renamed it schuimg and then started goldcard tool and followed steps but it says loading for two secs then reboot process

messdup said:
i dont fink spl5 does any way yh i go into usb host mode vol down and camera button and yh i have 4 gb usb flash drive and i put ruu.signed file and renamed it schuimg and then started goldcard tool and followed steps but it says loading for two secs then reboot process
Click to expand...
Click to collapse
and i have seen post and videos proving that u can use usb flash drive do u think sd reader would make a difference

I haven't seen any tutorials saying you can use USB. All I know is I had SPL 5, tried to instal RSPL, got halfbricked. And had to goldcard with a GoldCarded SD Card.
I'm not saying your wrong I'm just saying thats all I know.
I hope you can find a fix, I'd suggest trying to GoldCard with an SD Card that has GoldCard, it may change it but IDK. I will ask some people that helped me to help you (link them to this thread) so that you can solve this.
Good luck solving this, I'll tell you if I find anything that might help.

JamesKroll said:
I haven't seen any tutorials saying you can use USB. All I know is I had SPL 5, tried to instal RSPL, got halfbricked. And had to goldcard with a GoldCarded SD Card.
I'm not saying your wrong I'm just saying thats all I know.
I hope you can find a fix, I'd suggest trying to GoldCard with an SD Card that has GoldCard, it may change it but IDK. I will ask some people that helped me to help you (link them to this thread) so that you can solve this.
Good luck solving this, I'll tell you if I find anything that might help.
Click to expand...
Click to collapse
dude u been a great help done it with a sd reader it says enter usb host mode with everything plugged in how long do i wait untill it will read it

First off, is the SD Card GoldCarded? If not let me know and I'll provide you with links do the programs

JamesKroll said:
First off, is the SD Card GoldCarded? If not let me know and I'll provide you with links do the programs
Click to expand...
Click to collapse
yh goldcarded with a goldcard img from a thread on here and goldcarded with one of the tools on here it just says enter usb host mode

Did you rename the RUU_Signed.nbh to SCHUIMG.nbh?

JamesKroll said:
Did you rename the RUU_Signed.nbh to SCHUIMG.nbh?
Click to expand...
Click to collapse
yh is that the only thing i copy or do i put all the files on sd card aswell

No just SCHUIMG.nbh should be on the SD Card, you can also try putting the Goldcard.img on the SD Card, I think I had that on there when Flashed my phone. Also, make sure your not using a custom rom when using GoldCard method. Only stock roms

JamesKroll said:
No just SCHUIMG.nbh should be on the SD Card, you can also try putting the Goldcard.img on the SD Card, I think I had that on there when Flashed my phone. Also, make sure your not using a custom rom when using GoldCard method. Only stock roms
Click to expand...
Click to collapse
yh stock nodo rom i had goldcsrdimg on there anyway shuld i remove it

First off, do you have a built in SD Card reader on your computer?
If not do you have an Android or Windows Mobile 6 device?

JamesKroll said:
First off, do you have a built in SD Card reader on your computer?
no using sd card in card reader
Click to expand...
Click to collapse

[Q] hd7 stock on bootloader screen

Hi guys
i had dynamics rom on my hd7, my original rom was 1.57.707.2
i found 5.10.707.2 rom
i flash this rom. on 6% it reset and show connection error.
now my phone stock on booeloader (3 color)
PD29100 SS-BC (4K)
SPL 5.10.2250.0 (132968) MNG
MicroP(LED) 0x07
TOUCH S1 (V1.8,#1624)
SD SANDISK 15193 MB
Partition info-v211v413
F400
but it cant connect to computer and does not show "serial"
and it doesnot go to usb host
so i cant do anything on it not by sd card not by computer.
plz help me...

help plz...

....
ARA6 said:
help plz...
Click to expand...
Click to collapse
how you flashed?
step by step... with y-cable? or just with usb that rom?

wth usb my friend...
i think it is bricked and should use jtag.
i cant access it not by usb nor usb host...

....
ARA6 said:
Hi guys
i had dynamics rom on my hd7, my original rom was 1.57.707.2
i found 5.10.707.2 rom
i flash this rom. on 6% it reset and show connection error.
now my phone stock on booeloader (3 color)
PD29100 SS-BC (4K)
SPL 5.10.2250.0 (132968) MNG
MicroP(LED) 0x07
TOUCH S1 (V1.8,#1624)
SD SANDISK 15193 MB
Partition info-v211v413
F400
but it cant connect to computer and does not show "serial"
and it doesnot go to usb host
so i cant do anything on it not by sd card not by computer.
plz help me...
Click to expand...
Click to collapse
If you had dynamics rom why flashed with stock rom???
now you need y-cable,goldcard.. did you try press butons camera+volume+power
??
---------- Post added at 11:36 PM ---------- Previous post was at 11:21 PM ----------
And at last!
you don't need jtag just read that post http://forum.xda-developers.com/showthread.php?t=1435351
It's same like your's sitution you need y-cable not original usb!

LeTuVis said:
If you had dynamics rom why flashed with stock rom???
now you need y-cable,goldcard.. did you try press butons camera+volume+power
??
---------- Post added at 11:36 PM ---------- Previous post was at 11:21 PM ----------
And at last!
you don't need jtag just read that post http://forum.xda-developers.com/showthread.php?t=1435351
It's same like your's sitution you need y-cable not original usb!
Click to expand...
Click to collapse
i had tested his method and said that it does not work because it dont go to usb host. yes i test cam+vol+pwr it does not work