Related
Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again
i've read all the posts about installing and running smartskey, yet continue to have a real problem. i placed the .exe and.ini files in a new folder (smartskey) within the windows directory on my device. when i run it, it appears that everything works fine..hold left key opens start menu and hold right closes running application. after a few minutes, holding left key does not open start menu..i hear the system sound, as if it is starting, yet nothing. in fact, i can't even use the touchscreen to open it..must soft reset. any ideas what could be causing this? could it be that i am using wisbar advance and it opens a cascading menu? seems that would not be the problem as it works fine for a few minutes.
solved
well, after visiting the wisbar forum, I have an answer to my own question. smartskey works fine with wisbar, it just craps out when you close the start menu with the softkey. once you do that, the startmenu will not come back up unless you soft reset.
Hi all,
I've finally narrowed down where all my sytem crashes are coming from, and it appears to be my installations of "duttythroy HTC Touch Keyboard" and "HTC Touch Keyboard + Keypad"
Both are installed (HTC one first, then duttythroy), and when I come to type something, the options are there in the pop-up menu ("Touch Keyboard" "Touch Keypad"), however if I select one, the normal keyboard appears and the selected entry jumps back to "Keyboard", so I'm guessing thats because it failed to access/load the touch keyboard?
So I then go to uninstall, and it cannot uninstall either of them, it sits forever with the little spinning icon as it tries to uninstall, eventually failing by either locking the device needing a reset, or by popping up saying it cannot remove the application at this time.
Can anyone provide me manual removal details for this application, I'll need registry, files, etc to remove it as cleanly as I can if possible.
Thanks in advance
I dont know about your system crashes, but the solution to the keyboard and keypad problem is found here:
http://forum.xda-developers.com/showthread.php?t=271008
Hiya,
Thanks for that but I don't believe thats the actual issue, as its not between resets that it won't permit me to select the touch keyboard, its actually when I manually select the touch keyboard it cancels that and reverts back.
So, I really need to manually clean/uninstall these applications that appear to have become corrupted somewhere along the way.
That is the actual issue with the keyboard, it wont let you select it at all - if you read back through the post linked above it's not aimed at setting a default selection, it's to make it work at all!
I had the same issue, clicked on either and it would just stay on keyboard and so have many others. Installation of SIPchange sorted it. Maybe then you can rule out this being the problem for your system crashes?
Good luck
Software Keyboard (seems fast)
Try FingertouchPRO, the layout is customizable and so is the keyboard height, I was able to make this as big as fullscreen and also little as I liked.
The cab resides on www.fingertouchpro.com , just click the big CAB button.
There is a movie showing this toy in action, the speed (if it's real) is incredible!
well hi, im new here, i got an xda diamond touch, and my problem is that touchflow 3d doesnt start, i get always the windows mobile GUI, how can i start touchflo 3d ?
Sorry to ask the obvious, but you have enabled TF3D, haven´t you?
Start>Settings>Today>Plug-Ins>check TF3D is ticked (rough translation from German ROM).....
thanks for the quick respond, well when i enter today settings there is no touchflow 3d in the plugins only the windows stuff
Now that´s strange.....what ROM are you using? Standard HTC or some provider branded ROM? Thsoe ROMs usually contain the TF3D files - they are installed when you first boot up the device. It´s possible to supress that installation by doing a soft reset quickly after the initial display calibration screen....maybe that´s what happened?
If you haven´t done too much tweaking/installing you might try the old hard reset (you´ll loose all your settings/programs etc., that you have already installed). If you don´t want to do that, maybe someone else has got a better idea how to revive your TF3D.....
ok i have done a softreset yet, but didnt helped, now will try with a hardreset hmmm
Zida2k said:
yeah i have a O2 branded rom, how can i do a softreset ?
Click to expand...
Click to collapse
Have you had a look at the manual yet???
Soft reset: either press the red button in the stylus hole with the stylus, or long press the power key to shut down the device and then restart it - same effect.
Hard reset (reset back to how it was when you received the device): Push and hold "Volume Down" Key + "Enter" Key, push the reset button in the stylus hole while keeping the above buttons pressed, release the reset button and answer the onscreen questions.
When the device boots up after the hard reset you should be taken to the display calibration screen. After that the device will show you a quick countdown before installing additional apps (TF3D, phone skin, Opera, etc., depending on the ROM you are using). When installation is finished (do NOT interrupt it!), the Diamond will automatically soft reset. After that you really should have your TF3D installed and working.....
ok thanks but what should i do, restore manufacturer default or restore manufacturer default and format movinand?
Zida2k said:
ok thanks but what should i do, restore manufacturer default or restore manufacturer default and format movinand?
Click to expand...
Click to collapse
The "format" option also formats your internal storage (your device´s hard disk, so to speak), so it´s really up to you......by formatting the internal storage you will of course loose all your files on that media (movies, pictures, whatever you´ve already put there) and have to copy it over again.....
wow seems its working, thank u so much michi really THANK U
You are welcome! Glad, I could help!
lost a Touchflo theme
Hi, could someone help me?
My HTC P3700 doesn't show option for Touchflo 3D any more after I accidently press the clear storage.
Pesey said:
Hi, could someone help me?
My HTC P3700 doesn't show option for Touchflo 3D any more after I accidently press the clear storage.
Click to expand...
Click to collapse
Click Start/Settings then select the Personal Tab and click Today. Click the Items Tab at the bottom then click on the box to check Touchflo3D then click OK. You may have to scroll down a bit in the items list to find touchflo3d but it should be there.
All
I just received my TD2 and have tried to install 3rd party applications, though i keep getting the following:
"Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I have done some searching through the forums and google and have tried running
SP_AllowCertificateInstall & Cert_SPCS and these fail to install.
What other options do i have to edit registry keys (Have tried installing Registry_Editor>V0.9 without success).
Any assistance with this would be great.
Denis
Which apps have you tried to install?
Advanced Config Tool
Monopoly
Resco Brain Games
Worms
I will also be installing I-Go, still looking at applications i want.
None of these apps work?
All of them failed to install??
That is correct. None will install.
Have you tried to hard reset?
Would it need a hard reset. considering i pulled it out of the box on monday? Its literally brand new.. So stupid question, How do i hard reset these? Is it a hold the reset and power for 5 seconds deal?
Sorry for my newbie essence
But are you trying to install ppc or smartphone programs?
I got that message once and had to install sdkcerts.cab before I could proceed.
But I dont think all these apps would require this. Have you been able to install *anything*? If not, then a hard reset would not be a bad idea, out of the box or not. After all, its Windows.
Hard reset the device by holding both volume buttons and pressing the red reset button. Then the display should say "press volume up" or something.
So i hard reset the phone.. and booyah.. programs installed... and then as soon as i configured my email.. BOOOMMM.. it stopped working.. WTF?? WTF indeed. Now, I cant remove my email settings. Something is screwy. It may have been the active sync on my vista machine???? who knows.. but something is not right, now it doesnt prompt me for any signing it simply denies all.
So.. after some more reading.. it appears my phone App locks??? So where can i get an AppUnlocker for this??
Ok.. fixed.
http://rapidshare.com/files/105133496/Unlock_HTC.rar.html
Download this and follow instructions.. it works on the Touch Diamond 2 as I have just done this..
Ok.. fixed.
http://rapidshare.com/files/105133496/Unlock_HTC.rar.html
Download this and follow instructions.. it works on the Touch Diamond 2 as I have just done this..