Related
So, to start off, the issue at hand is not download mode, I can get into that quite easily. It's that neither one click odin or regular odin won't recognize it. I've gone back to stock so many times without issue, but this particular time I tried, it froze on sbl.bin. My screen turned a greenish black, and stayed on that for about 10 minutes before I decided it was frozen and I did a battery pull. Tried it again and the exact same thing happened. Now, windows says "One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it"
I was going from icezar's Darky's 5.5 to stock when this happened. I've gone from the first i9000 2.2.1 stock rom back to stock 2.1 with no problems before. Any ideas? I've also reinstalled drivers, and I still get that error. also, my power button doesn't do squat when it's completely powered off. Only the volume up+down button combo can bring the download screen up, other than that, no go.
Ouch - You've reinstalled the drivers.
Odin doesn't see it when you have download mode and the USB plugged in.
Can you get ADB to see the device while in download mode?
You had USB Debugging turned on before things went south?
Hmm.. you could try:
Turn on ODIN
Remove the SIM, external SDCard, and battery.
Hold down both volume buttons - plug in the USB cable then jam in the battery and see if ODIN will recognize it then.
But.. if you can't get the computer to recognize your device even after re-installing the USB Drivers?
eh you might wait for a few more posts - but I think you might be fubard.
so you went into download mode, clicked start in ODIN 1 click and got hung up? nothing else happened during the process? Was the cable plugged all the way in?
Not sure how ADB would work if windows isn't recognizing it.. Do you have another PC you can connect to?
Sounds like it pooched while he was trying to Odin 1 Click back to stock and now its probably fubard as his computer won't recognize the device.
Good call on trying a different computer.
Btw - where are you downloading the USB drivers from? There are multiple sources out there and some seem to work better than others.
Thanks for the replies guys
I got them from the wiki page way back when around it was first put up... but I haven't really changed them since they were the only ones that I found worked at the time and pretty well actually, they've recognized my captivate perfectly all the time! Well, until recently. I also have kies mini installed if that means anything. I am gonna try a friend's computer and see what happens. *crosses fingers*
alex4lex said:
Thanks for the replies guys
I got them from the wiki page way back when around it was first put up... but I haven't really changed them since they were the only ones that I found worked at the time and pretty well actually, they've recognized my captivate perfectly all the time! Well, until recently. I also have kies mini installed if that means anything. I am gonna try a friend's computer and see what happens. *crosses fingers*
Click to expand...
Click to collapse
if you haven't already, try the files attached to the Odin 1 click thread (on any pc you can get your hands on )
not sure what options you have until you can get a pc to recognize the device
Yup.. the good news if you can get into Download mode on your phone - its def not bricked.
I use the Odin 1-Click USB drivers posted there and have had no issues on either my work rig Windows XP 32 bit or Windows 7 64-bit.
Epic success! Phone is back to 2.1 stock! Thanks for all the help joegeek and fisherman
So, I went to install gingerbread on my captivate, ripped from the nexus s, but I accidentally flashed the wrong thing. now my phone turns on to the att logo, then it goes away, then about 20 seconds later it comes back. I have been looking for hours on how to get to download mode, and I think that somehow I crippled my chances of using the 3 button combo. I know how to use abd to get to download mode, and my computer shows that my phone is connected when I plug it in at the att logo, but, my PC thinks its a nexus s and it can't find drivers for it. I updated my SDK but it still wont find drivers. is there anyway to install nexus s drivers or to get my phone into download mode without a jig?
Just take the battery out and plug in usb cable while holding volume up and down. (I had the same problem until someone suggested this)
that didn't do anything. if it matters, my phone wont even get to the battery charging screen with the usb cable plugged in, the spinning circle thing comes up for about 2 seconds, goes away, then comes back but its frozen the whole time, nothing else happens. My PC still sees that its plugged in, but, like I said, it thinks its a nexus s, and wont install drivers :/
PS: as to exactly what happened, I forgot to do the voodoo lagfix before trying to install the gingerbread dump from the nexus s, so I got into download mode and went back to 2.1. it was right after that when I realized that my three button combo wasnt working, so I was going to fix that by updating the bootloader, but accidentally loaded nsongs.tar instead of the tar that would fix my download mode combo, so in Odin, I had phone bootloader update checked when I flashed that
tortugasthebest said:
Just take the battery out and plug in usb cable while holding volume up and down. (I had the same problem until someone suggested this)
Click to expand...
Click to collapse
i had a successful install.....but my problem came when trying to revert to stock.
PC wouldn't recognize device and for the first time ever i couldn't get into download mode using method above or a 3 button method that worked for me (a slight variation to method stated above).
Finally the following worked:
1. open odin 1-click JF6
2. remove battery (and any external sd) from phone
3. plug phone into pc via USB (without battery in phone)
4. Hold Vol + / - toggle down simultaneously.
5. While holding the buttons down insert the battery. When i did this my phone entered DL mode almost immediately and i was able to use odin to get back to stock.
build 1007
I'd try the above method to get into DL mode.. if that doesn't work you can try the JIG and see if that works.
But a requirement before flashing was to verify that your buttons worked on your phone.
the buttons were working, but I didn't have a lagfix installed. I flashed back to stock and noticed that my buttons weren't working after that. I went to fix them but flashed nsongs.tar by accident, and I had the "phone bootloader update" box checked, so I'm thinking thats why my buttons aren't working now. I've tried that method above a couple times and nothings happened...
Hmm.. you can try and update using the Nexus S USB drivers.. if they are different from ours that is .. go to that forum and poke around to look for them.
At this point.. can't hurt trying anything.
Where would I find the nexus s drivers? I installed the samsung mobile phone drivers, but my computer still says "found new hardware - nexus s" anytime I plug in, and it shows up in device manager with a big yellow question mark.
avgjoegeek said:
I'd try the above method to get into DL mode.. if that doesn't work you can try the JIG and see if that works.
But a requirement before flashing was to verify that your buttons worked on your phone.
Click to expand...
Click to collapse
same as the poster
when i did my install my buttons were working as well....i have the 1007 build and never had any problem getting to recovery or dl using 2-button and 3-button combo's.
After the gingerbread flash was a different story though. Luckily for me the method i posted almost like jumpstarted me into DL mode....when i did that it went into DL faster than it ever had with the normal methods....the DL screen popped up almost the instant the battery connectors hit.
yea, none of the methods I've found have gotten me into download mode. Is there anyway to get the nexus s drivers so I can do this through adb? I don't have a car so getting to radioshack to buy resistors is kinda hard :/
ok, so I updated my sdk again and it now I have the drivers installed, I can use adb now, but whenever I do, adb reboot download, it reboots, but not to download mode, i goes right back to the boot loop. I was wondering if there was anyway to push a new bootloader onto my cappy using adb. that would be awesome
I have a Verizon Galaxy Tab 7-inch with WiFi and 3G running Android 2.2 (Froyo). I mistaking tried to flash the new Android 2.3.3 before realizing it was only for GSM phones. I followed all the instructions using Odin3 (1.7) and everything looked like it worked except it never rebooted and I never got it into the Recovery Mode. I was still able to get in Download Mode so I tried to find a compatible 2.2 ROM to flash. I flashed the Roto JME rom, it didn't reboot. I flashed P1000NUBJM2_P1000NUBJM2_P1000NUUBJM2_HOME and it didn't work. Odin3 seemed to install these, I always got PASS. Now my Tab is totally unresponsive. Odin3 acts like it's installing but I can't get the Download Mode screen anymore. How do I get it back to factory or some working system? I don't expect to save anything I've loaded, I just want it to work again. HELP. Thanks.
P.S. If I can't fix this, who do I take it to to re-install the system? I got it from Verizon.
Can you get it into recovery mode? (Turn off, then Power + Volume UP)
No success
No, nothing I do will show anything on the display. I can't get into Recovery Mode or Download Mode. However, when I'm hooked to the computer and press the correct buttons to turn on/off or Download Mode, I hear the computer beep indicating it sees the USB and the yellow COM widget in Odin3 lights up and says it's up and in Download Mode. I can then flash it and it says PASS. I also just tried Heimdall and it also seemed to successfully flash the original Verizon SCH-I800_VZM firmware. Nothing displays when I try to go into Recovery Mode. I don't even see the picture of the battery when I plug it into the wall. Have I somehow trashed by screen?
Hi ! I got the same problem and now my Tab totally bricked...
Samsung just needs to give us the files and software to load these tabs back to stock! That would end the return issue for the carriers and let us unbrick them. Like any other device, there is a way to fix it without having to send it back.
Sent from my ADR6400L using XDA Premium App
Hi everyone! I have Captivate(1008 batch) with Phoenix Ultimate firmware. Today I tried to flash it with batch Gingerbread. Seems like my mistake was that I forgot to turn off lagfix. Odin halted. Now I'm getting "phone-!-PC" screen each time I connect phone to PC...
I can not get cappy into download mobe(tried all 3 ways)
Odin doesn't see phone...
Do I have any chaces to repair my phone or it's a brick? Is there a chance that jig will help?
There's a new thread in the dev section about a one click unbrick from that screen. I read that it's just downlad the software, plug in phone and click run.
AdamOutler made this -
http://forum.xda-developers.com/showthread.php?t=1153310
Ok, thanks I'll try that! BTW which fimware should I flash if my cappy is back to download mode? As I understand Phoenix formated my phone memory into ext4 filesystem. Is that possible to flash stock Gingerbread on ext4 filesystem?
UPD: Unfortunately software unbrick doesn't help I got "Phone is not connected" message. My PC doesn't see phone at all
The Jig should work, assuming you don't have mixed bootloaders. If you do have mixed bootloaders, JTAG service will be what you need.
If you do manage to get back to download mode, use the JF6 Odin 1-click.
You can get it here: http://forum.xda-developers.com/showthread.php?t=731989
Here's another suggestion that I did with a 1008 that I had a while back. open Odin 1 click to prepare for download mode. (make sure it's not one with the three button fix - if you one click from gingerbread to 3 button fix stock, it is a certain hard brick).
Remove battery, count to 10, replace battery.
hold the vol up and vol down buttons at the same time until you see the screen flash. It should flash every 5-7 seconds as long as you continiuosly hold the buttons.
When you see the screen flash, insert usb cord (with it already connected to computer).
This got me to download mode. It mat take a few tries. sometimes it's a challenge to get to DL mode from this screen. This procedure worked on my 1008. Hope it works.
A jig may work too, but it n ever worked for me on the 1008.
Thank you guys. Hope your suggestions will help!
With the phone and PC screen the Jig will work for sure try and make one or u can buy it.
You can also try this, Remove the battery open odin 1 cick and plug the cable to the usb port at the back of the PC and then the phone and now put the battery see if the odin lits up if yes you are done.
I solved the problem(even without jig). So writing my solution, hope this will help someone.
1) I went home to use another PC. Installed Samsung drivers there.
2) I tried different key combos. Vol Up + Vol Down didn't worked but Vol Down + USB entered Download mode.
3) One guy from russian android forum told me to try with Odin 1 click 2.1 stock firmware. Only this version of firmware connected to my soft bricked phone.
One more time thanks everyone for your replies
For future reference.
If your phone turns on (you can see anything on the screen), then you do not have a perminate brick, and a jig will work.
And your filesystem/lagfix does not matter with odin 1click. It resets everything to the way it came, nomater what you came from. (It even works on cm7 witch repartisioned it and used MTD).
I have the same problem as you. I can't get get the one-click unbrick to work (doesn't detect a device). I ordered a jig yesterday, hopefully it comes soon. I have a 1010 though, which I heard had more problems than others.
use a JIG
i made my custom JIG for 60 cents, save my Cappy after a failed cyanogen install.
No firmware and USB problem
I have a large problem, my wifes galaxy s won't go by the first screen (says GALAXY S GT-I9000)
So i thought i'd fix it using odin using the 3 button combo. But that isn't working anymore.
Luckily i have a usb jig which gets me to the download mode ...... but !
When i connect the pc cable (tried 2 OE samsung ones) i get device not recognized so i can't use odin to fix it.
What can i do, or do i have to send it to a repair centre to be resurrected ?
I have searched and searched but not found any topics with the same issues i have on her phone.
Need a bit more info i.e were you flashing the phone??if so which rom?
Then phone was playing up so i flashed darkys 10.4.2.
However the usb connection wouldn't work so i flashed it to standard JVT
using mobile odin.
Then i rooted it and went to go into recovery mode and it wouldn't turn on.
I tried to help the gentleman , but no luck . From what he told me , phone turns on after battery insertion , and It is not recognised by usb => so odin not usable .
If you can get to download mode but the phone isn't recognized by your computer then i'd say it's a driver issue. Install your phone's drivers again. To do that, just installing kies is enough BUT be sure to open task manager in windows and kill any process that has kies in it's name before opening odin.
If that still isn't flying i'd try using different USB ports and even with a different computer.
Extra advice:
- try not to flash bootloaders for now. That means picking a rom that has no bootloaders included but matches your phone's current bootloader. If you were using gingerbread flash a gingerbread rom, if you were using froyo, flash a froyo rom.
phone not starting up past first screen (GALAXY S GT-I9000 in white on black screen), phone not recognized neither by pc nor laptop ( usb drivers installed ) , phone turns on after battery insertion without pressing anything.
This manual is from a German board
Take the battery out, then hold the 3 keys combo for download and put the battery back on. Now you should start the download mode.
If not, then try it with a jig.
Good luck!
GOT A JIG. WORKS FINE.
But pc wont recognize it !!
Have you double checked that you have the right drivers installed? I know you have to use the Nexus S drivers for CM9, not sure about Darky's ROM.
Drivers
Download drivers 64 bit | 32 bit from here and install.
It is NOT the drivers as my other galaxy s connects fine every time.
Drivers have been removed and installed repeatedly.
I would suggest a different computer, maybe a different cable. I have this same issue with my infuse, hope you get this resolved.
Sent from my Desire HD using XDA App
Already tried that as well
You could try Adam outler's unbrickable mod.
Pasted from other thread:
I just wrote a wall of text b4 and my browser crashed GG
Well, here we go again, i will only tell what I did/the process
I did a nandroidbackup, then i wiped all data (data+cache+dalvik), installed CyanogenMod 9 (Build 16), it rebooted automaticly, so I entered recovery again, installed Google Apps from there, wiped data and cache (no dalvik), rebooted.
Ended up looping at the Samsung screen (not animation), and I couldnt do the 3-button-combo, so the NANDroid backup is useless.
I can enter the download thing, but i dont even know what it does.
Tried plugging it in the charger (after letting it dry out during the night), and only the loop thing appears. Cant do anything.
I see that theres something called odin (Since my download thing is working (VolDown+Home+Power) if its that you mean.
If its possible to fix my phones state, please tell me how, since I startedrooting, flashing and stuff yesterday (Gotta start at some point) and followed HDTechVideos tut (On his website)
woolf clubs said:
You could try Adam outler's unbrickable mod.
Click to expand...
Click to collapse
I have nowhere near enough ability for that. Pity though.
Your problem is most likely the USB port. Maybe cleaning it might help. It happened to me for a few months then when I got the S2 I stopped using it. Began to use it as my home 3g wifi modem and kept it on charge the whole time. A few weeks later tried connecting it to the computer and it worked first go. Ever since it has worked perferctly. I suspect the problem possibly started by a rain drop getting into the port.
Mind you, even when it wasn't being recognised by the PC, I would constantly connect, remove, reconnect, reboot PC and phone etc and it would sometimes get recognised. Other times it wouldn't connect but Odin still recognised it.
Sounds silly but try leaving it on charge as I did and maybe, just maybe you'll be lucky like I was.
Sent from my GT-I9100T
Well as of today it is away to the O2 repair centre.
Its under warranty (unless the find out it was rooted etc) so fingers crossed.
Well had a text back today to say my phone has been despatched, so here is hoping that its fixed.
It came back from the repair centre yesterday with a note saying a part had been replaced,
no costs for me, yippeeeeeeee.