Hey All,
I just picked up my Captivate last night and have been fooling around with it ever since. The only problem I'm having is that I can't get my Macbook Pro to recognize the Captivate or the SD card (kind of huge since I had wanted to root).
I have tried USB debug mode and got it to recognize once when the external sd card was not in the phone, but since that one time it will not recognize.
I ran Disk Utility and can find the internal sd card there, but it is not being recognized on the Desktop or in DoubleTwist.
Any help would be appreciated!
Will
Moved to Captivate Q&A.
Please ask this question in the q&a section. This the development forum.
Sent from my liberated Captivate via XDA App.
When you plug your phone into the usb pull down the notification window. There should be something that says mass storage. Click, select to mount. You should be able to see it then
Sent from my SAMSUNG-SGH-I897 using XDA App
i m having the same issue...
my phone mount with no problem to my imac and bootcamp xp and to my powermac g4, my macbook pro doesnt detect my phone at all, not even in system profiler, i dont get the network prefs, popup but my phone detects my macbook, connects and charge. running latest os 10.6
I am having the same issue and have followed every troubleshooting guide I could find online with no success getting my macbook to recognize the captivate. The only workaround I have use for the last few weeks is to transfer files via bluetooth exchange but this is a little inconvenient when transferring large movies or even a few albums at once as it takes so long. If anyone has any other suggestions they would be helpful.
Try enabling debug mode on your phone. Settings-Applications-Development-USB debugging.
Sent from my SAMSUNG-SGH-I896 using XDA App
Hi there.
I use an Asus Transformer with the Keyboard Dock, so it has USB ports. Normally I can use these USB ports to read and write data to USB drives and card readers.
When I tried to connect my Droid Bionic in Storage Mode, the "New storage device found" message popped up in the notifications toolbar on Honeycomb on the tablet. Then the symbol disappeared, and I was unable to locate the Bionic's internal storage or its SD card.
I would like to be able to transfer my music from my Transformer without having to open up the phone and stick the Transformer's microSD into it, so is there any way to facilitate Android to Android information transfer over USB?
Thank you.
It should show up under the the removable folder (same spot where you would see a micro sd card get mounted too). I have a transformer as well. Ill give it a try and report back in a bit...
Sent from my DROID BIONIC using xda premium
Feoen said:
Hi there.
I use an Asus Transformer with the Keyboard Dock, so it has USB ports. Normally I can use these USB ports to read and write data to USB drives and card readers.
When I tried to connect my Droid Bionic in Storage Mode, the "New storage device found" message popped up in the notifications toolbar on Honeycomb on the tablet. Then the symbol disappeared, and I was unable to locate the Bionic's internal storage or its SD card.
I would like to be able to transfer my music from my Transformer without having to open up the phone and stick the Transformer's microSD into it, so is there any way to facilitate Android to Android information transfer over USB?
Thank you.
Click to expand...
Click to collapse
Worked for me. The only quirk was after setting my Bionic mass storage, I had to disconnect and reconnect the USB cable for it to stay mounted.
Sent from my Transformer TF101 using xda premium
Hmm took four tries but it eventually read it as USBDisk2 in Removable. Problem being, that directory was only 4Kb large so out wouldn't let me copy to it...
Sent from my DROID BIONIC using XDA App
Still having no luck transferring files between the two. I am feeling more and more sure that this is the result of the special partitioned file system the Bionic has. The 4Kb disk drive that mounts on the transformer shows all the folders on the Bionic but has none of the files.
Sent from my DROID BIONIC using XDA App
I posted this on the Primes forum but wanted to post it here as well. Tonight I was sitting here on my lunch break and thought I'd try something I've never tried. I have my Primes dock with me (usually leave it at home) and decided to connect my Vivid (Android 4.0.3) to my Prime's USB. When I did the phone asked if I wanted to just charge or mount as a disk drive. I told it disk. Anyway, I went into file manager (on my Prime) and it is not listed at all, not even as an SD card. I tried File Manager HD (on my Prime) and the same thing. No notification came in as to let me know if an SD card has been inserted like it does when I put an SD card in the SD card slot of the dock. Is there a setting or some other parameter that needs to be changed on the Prime or phone? What I was going to do is transfer some pictures over to the Prime. Anybody have an answer?
Thanks
Oh ya, I tried it with USB debugging on and off on both devices.
theandies said:
I posted this on the Primes forum but wanted to post it here as well. Tonight I was sitting here on my lunch break and thought I'd try something I've never tried. I have my Primes dock with me (usually leave it at home) and decided to connect my Vivid (Android 4.0.3) to my Prime's USB. When I did the phone asked if I wanted to just charge or mount as a disk drive. I told it disk. Anyway, I went into file manager (on my Prime) and it is not listed at all, not even as an SD card. I tried File Manager HD (on my Prime) and the same thing. No notification came in as to let me know if an SD card has been inserted like it does when I put an SD card in the SD card slot of the dock. Is there a setting or some other parameter that needs to be changed on the Prime or phone? What I was going to do is transfer some pictures over to the Prime. Anybody have an answer?
Thanks
Oh ya, I tried it with USB debugging on and off on both devices.
Click to expand...
Click to collapse
does the prime support usb otg. i think it needs too.
EDIT: of course it does (i think might be wrong)
I believe it does. It sees an 80gig HDD I have then plugged into the docks USB port.
I rmtried the same thing with my nexus 7 and it says USB device is corrupted.. ik its not so idk
Sent from my HTC PH39100 using Tapatalk 2
People have asked since discovery of our beloved Ouya once you've got it out of the box you may have noticed that their is a USB port on the back.
After quick maintenance of my own personal testing USB will simply not run from stock.(Not that I'm fully aware of).
There are a few key ways of going about this, two ways as far as we know.
But I'm only teaching one.
First off, if you've plugged up a USB and didn't get a mount, there are a few steps to take to attempt to fix. I've got a positive affect to this, others have had different.
So let's start off first by using the ADB method of getting root a.k.a Superuser onto out device using the tut in the dev area.
Once you've accessed this, download "[root] StickMount" from the market. Assuming that this .apk can't be found on Google let's use an app to pull your .apk from the downloaded stuff you've gotten in the Google Play Store.
Now there are a few apps that do this, I used App2SD and rebuilt the .apk myself(which took a good while recoding), once you've pulled the .apk either load it tons cloud storage area you use, or side load it, you can also find a tutorial in the dev area as well.
Once you've got the app loaded make sure you set the setting properly to detect the USB you plan to use! This is key to getting something detected. From here you should be able to check in your file explorer and locate "ExternalSD" or whatever you see it fall under. If, and only if the USB doesn't show up, that may mean you've got the wrong format. I want each and all of you to give FAT32 a go as this is standard.
Warning, I don't know who all has tried this so if you're not happy with the occurrence, don't come beating my door in.
If there's anybody who ends up with a successful outcome, please leave feedback!
If nobody gets anything I'll just make sure to have this thread locked or closed.
If you're suffering any other issues, try this.
krankdroid said:
Since my 8 GB USB storage formatted FAT32 worked by just plugging it in, i am not to say what format storage should be formatted in, but seeing that this is just Android, i don't see how setup should differ in anyway from most other devices.
Now plugging in storage does not bring up any notifications on the OUYA since notification area has been disabled.
So you need to use a file explorer to navigate into the USB storage. Sadly, OUYA decided not to add something as simple as access to your own file system.
in "Make" "Software" open the browser. navigate to this:
http://bit.ly/13SJxOB
i shortened the URL since the full URL is a pain to write on a controller:
http://gdown.baidu.com/data/wisegame/86f47585c4eed74f/ESFileExplorer.apk
Once downloaded. go to "Manage" "Advanced" "Storage" and open up downloads. select the "ESFileExplorer.apk" app you just downloaded and head back to the main menu.
"Make" Software" and next to the browser you should see the app icon for the ES File Manager.
in the file manager that has the default start page in your internal SD card storage. Just select your "USB Storage" instead of "SD card"
installing something like StickMount and needing superuser privileges is totally overkill for just accessing external storage.
if the root and stickmount way works for 1000 GB+ storage sizes i have no idea. However i don't see how it should affect external storage size
Click to expand...
Click to collapse
You're doing it wrong, then. Mine mounted my fat32 USB ssd right out of the box. No extra apps or haxx needed. It mounts to /mnt/usbdisk or something along those lines.
gianptune said:
You're doing it wrong, then. Mine mounted my fat32 USB ssd right out of the box. No extra apps or haxx needed. It mounts to /mnt/usbdisk or something along those lines.
Click to expand...
Click to collapse
This isn't for you then.
Sent from my HTC One VX using xda app-developers app
All Ouya's should mount a harddrive with no problem. You just have to plug it in when it is off or restart using a app or the terminal. It just has to be OFF not in sleep mode.
samt3 said:
All Ouya's should mount a harddrive with no problem. You just have to plug it in when it is off or restart using a app or the terminal. It just has to be OFF not in sleep mode.
Click to expand...
Click to collapse
No, there's different methods for different formats.
Terabytes won't read unless you've got a certain thing installed.
If this was useful to you, I can only ask of a favor!
Check out my YouTube channel!
http://WWW.YouTube.com/user/TheDarkRosary
Subscribe if you will!
Ouya-XD said:
No, there's different methods for different formats.
Terabytes won't read unless you've got a certain thing installed.
Click to expand...
Click to collapse
This is true, all of a sudden this week there were many people having trouble using their USB drives. Mine used to work until sometime this week. NTFS included. I was able to mount an NTFS-formatted 1TB Seagate Expansion drive earlier tonight. What I had to do was root my Ouya and use the USB OTG Helper app. I made a post on OuyaForums about it here.
NssOne said:
This is true, all of a sudden this week there were many people having trouble using their USB drives.
Click to expand...
Click to collapse
I have a "2"gb, or 2,000,000,000 bytes. 1.86 real gb... anywho, its a Lexar jump drive I wanted to copy files with, and I have a single FAT32 partition and was not able to mount it simply by plugging it in. Tried rebooting, and re-plugging the device. It doesn't work. I imagine it may with stickmount.
jmhalder said:
I have a "2"gb, or 2,000,000,000 bytes. 1.86 real gb... anywho, its a Lexar jump drive I wanted to copy files with, and I have a single FAT32 partition and was not able to mount it simply by plugging it in. Tried rebooting, and re-plugging the device. It doesn't work. I imagine it may with stickmount.
Click to expand...
Click to collapse
Certain Jump drives will not mount because the USB port does not supply enough power. Powered USB drives or very efficient ones will work.
Sent from my Nexus 10 using Tapatalk HD
samt3 said:
All Ouya's should mount a harddrive with no problem. You just have to plug it in when it is off or restart using a app or the terminal. It just has to be OFF not in sleep mode.
Click to expand...
Click to collapse
Nope. I have an 8GB usb stick and it doesn't work no matter what I do or what format I put it in. Haven't tried this method yet but what you're talking about does NOT work for everyone. And the powered 2TB external drive just causes Ouya to freeze every time at boot.
altimax98 said:
Certain Jump drives will not mount because the USB port does not supply enough power. Powered USB drives or very efficient ones will work.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
I have never seen a powered USB flash drive. Furthermore, if a flash drive isn't mounting due to the port not outputting enough power, then the drive or the mobo is broken or otherwise failing to adhere to the spec. External hard drives (spinning platters) of the type common a few years ago when flash drives were cost prohibitive generally DO require an external power source (or at least draw from 2 USB ports), but they generally aren't referred to as jump drives. In my experience (which is considerable but not infinite) most flash drive issues tend to be due to bad connections after the drive is beat up or by managing to write past the end of the drive. Flash media is generally reliable and does not draw more power than the USB port puts out by spec. I highly doubt that power supply problems are a common cause of mounting issues.
Sent from my SCH-I535 using Tapatalk 2
jmhalder said:
I have a "2"gb, or 2,000,000,000 bytes. 1.86 real gb... anywho, its a Lexar jump drive I wanted to copy files with, and I have a single FAT32 partition and was not able to mount it simply by plugging it in. Tried rebooting, and re-plugging the device. It doesn't work. I imagine it may with stickmount.
Click to expand...
Click to collapse
Read this
v. v.
It seems that you just wanna shun the method I gave you.
If you dont want help, that's fine with me but please don't come into my threads to tread on my method.
Firstly, I need to know!
Are you rooted or stock?
If either, have you installed Ouya Plus?
If so! Try the given method above or Google an apps that suits your needs.
We are here to help, and I'm telling you right now that this method has worked for me, and maybe other users.
FACT:
Not all Ouya have been able to read USB from start, more than others have reported having issues with USB and have had to use the root method to even get a reading.
TIP:
Wanna check and see if your device is/has been read?
Please either use FX File Manager or Astro as these are the best at the moment. Both can be found and side loaded onto the Ouya.
Once you've installed either one, go to the manager, do you see an "External Drive" or "USB Mounted Drive" on the device? You're good to go.
ADVICE:
Did this not show up for you?
SOLUTION:
The butter to the bread is as easy as my method above yet not all people have been as lucky as I.
NssOne said:
This is true, all of a sudden this week there were many people having trouble using their USB drives. Mine used to work until sometime this week. NTFS included. I was able to mount an NTFS-formatted 1TB Seagate Expansion drive earlier tonight. What I had to do was root my Ouya and use the USB OTG Helper app. I made a post on OuyaForums about it here.
Click to expand...
Click to collapse
If this was useful to you, I can only ask of a favor!
Check out my YouTube channel!
http://WWW.YouTube.com/user/TheDarkRosary
Subscribe if you will!
how do you get apps2sd to read the external usb and not internal? the usb stick shows up but apps2sd only sees the internal
Predator04 said:
how do you get apps2sd to read the external usb and not internal? the usb stick shows up but apps2sd only sees the internal
Click to expand...
Click to collapse
I've only heard of Apps2SD working with ROOTed Ouyas only.
If you can't find the solution here, go and check the official forums, there are some people there who helped me.
Sent from my HTC One VX using xda app-developers app
Ouya-XD said:
I've only heard of Apps2SD working with ROOTed Ouyas only.
If you can't find the solution here, go and check the official forums, there are some people there who helped me.
Sent from my HTC One VX using xda app-developers app
Click to expand...
Click to collapse
yeah its rooted. i guess this method does not work.
Predator04 said:
yeah its rooted. i guess this method does not work.
Click to expand...
Click to collapse
Since my 8 GB USB storage formatted FAT32 worked by just plugging it in, i am not to say what format storage should be formatted in, but seeing that this is just Android, i don't see how setup should differ in anyway from most other devices.
Now plugging in storage does not bring up any notifications on the OUYA since notification area has been disabled.
So you need to use a file explorer to navigate into the USB storage. Sadly, OUYA decided not to add something as simple as access to your own file system.
in "Make" "Software" open the browser. navigate to this:
http://bit.ly/13SJxOB
i shortened the URL since the full URL is a pain to write on a controller:
http://gdown.baidu.com/data/wisegame/86f47585c4eed74f/ESFileExplorer.apk
Once downloaded. go to "Manage" "Advanced" "Storage" and open up downloads. select the "ESFileExplorer.apk" app you just downloaded and head back to the main menu.
"Make" Software" and next to the browser you should see the app icon for the ES File Manager.
in the file manager that has the default start page in your internal SD card storage. Just select your "USB Storage" instead of "SD card"
installing something like StickMount and needing superuser privileges is totally overkill for just accessing external storage.
if the root and stickmount way works for 1000 GB+ storage sizes i have no idea. However i don't see how it should affect external storage size
krankdroid said:
Since my 8 GB USB storage formatted FAT32 worked by just plugging it in, i am not to say what format storage should be formatted in, but seeing that this is just Android, i don't see how setup should differ in anyway from most other devices.
Now plugging in storage does not bring up any notifications on the OUYA since notification area has been disabled.
So you need to use a file explorer to navigate into the USB storage. Sadly, OUYA decided not to add something as simple as access to your own file system.
in "Make" "Software" open the browser. navigate to this:
http://bit.ly/13SJxOB
i shortened the URL since the full URL is a pain to write on a controller:
http://gdown.baidu.com/data/wisegame/86f47585c4eed74f/ESFileExplorer.apk
Once downloaded. go to "Manage" "Advanced" "Storage" and open up downloads. select the "ESFileExplorer.apk" app you just downloaded and head back to the main menu.
"Make" Software" and next to the browser you should see the app icon for the ES File Manager.
in the file manager that has the default start page in your internal SD card storage. Just select your "USB Storage" instead of "SD card"
installing something like StickMount and needing superuser privileges is totally overkill for just accessing external storage.
if the root and stickmount way works for 1000 GB+ storage sizes i have no idea. However i don't see how it should affect external storage size
Click to expand...
Click to collapse
Thanks for helping, I'll make sure to add this to the OP
Sent from my HTC One VX using xda app-developers app
Mine wouldn't work right out of the box. I turned it on and set it up. Plugged in my 2.5" spare laptop USB 3.0 HDD. Nothing. 32gb NTFS Thumb drive. Nothing. 16gb FAT32. Nothing. MicroSD 16gb (used in my MK808). Nothing. Thought my USB was blown. Plugged in a PS3 Sixaxis controller and it worked. So something was strange.
Read online that there was a firmware patch that must have broke some things. I'm assuming this broke if a USB was previously mounted.
Only a Factory Reset would fix it. Plugged in the USB HDD and it booted right now first time. Spent 2 days screwing with it.
So if nothing mounts, factory reset. It SHOULD mount out of the box. FAT32 and NTFS are both confirmed to work with no additional apps.
player911 said:
Mine wouldn't work right out of the box. I turned it on and set it up. Plugged in my 2.5" spare laptop USB 3.0 HDD. Nothing. 32gb NTFS Thumb drive. Nothing. 16gb FAT32. Nothing. MicroSD 16gb (used in my MK808). Nothing. Thought my USB was blown. Plugged in a PS3 Sixaxis controller and it worked. So something was strange.
Read online that there was a firmware patch that must have broke some things. I'm assuming this broke if a USB was previously mounted.
Only a Factory Reset would fix it. Plugged in the USB HDD and it booted right now first time. Spent 2 days screwing with it.
So if nothing mounts, factory reset. It SHOULD mount out of the box. FAT32 and NTFS are both confirmed to work with no additional apps.
Click to expand...
Click to collapse
I did a factory reset, still wouldn't work. I lost hours of work to set it up.
I managed to fix it with a script after about 5 hours
XblackdemonX said:
I did a factory reset, still wouldn't work. I lost hours of work to set it up.
I managed to fix it with a script after about 5 hours
Click to expand...
Click to collapse
which script???? lol cant just say that and not give info! how rude haha
Ouya-XD said:
Thanks for helping, I'll make sure to add this to the OP
Sent from my HTC One VX using xda app-developers app
Click to expand...
Click to collapse
yeah no problem. However i REALLY fail to see how this belong in the development section. This should be for ROMs, MODs and tweaks, not really how best to get a build in stand feature working. No matter how bad it has been implemented by OUYA.
Could some of the mods look into moving OP's topic?