Hi all,
My TD2 can't sync nor recognized by the PC on the last few days. I'm using Energy ROM, HSPL 2.51. There's only a plug-in icon on the battery when i connect the cable to PC... I've tried on my laptop and my brother Mac, same result T___T
And i've tried different ROM ....
What can I do ?
Any suggestion ? Please help
Thanks a lot.
Sometimes it sync and sometimes dont ...
Please help
Related
Hi..huge problem here...
..I've been uisng Faria for about a week....very nice ROM...but yesterday i installed CheckNotification (for deleting old/duplicate niotifications..) and my AS stop working...
I tried mayn things from this forum..from switching to "COM connection" with USB switch, unchekd/checked USB to PC option....but nothing help.
When i cradle my Qtek 9100, ActiveSync detect phone...and status Synchronizing is in ActiveSync........but when it gotta be synchroniezd there is an error : ActiveSync cannot connect to the Windows Mobile Device...
I've even tried switch to USB mode (softreset+rec button) to make new ROM install from beginig, but I can't...i get error... ERROR 260 Update Error.
I'm not shure that CheckNotification software is guilty for all that..buw, before it's installation everything worked OK.
I noticed a few things..
when i cradle phone and my ActiveSync is in status Synchornizing...there is no sync sign on ma PDA in Start line as usually
my Contacts dissapeard
my Tasks/Appointments dissapeard..
I hope...i didnt' fuc*** up my PDA.
Any help? Please.....
Thank U very much!
Luka
akulp said:
Hi..huge problem here...
..I've been uisng Faria for about a week....very nice ROM...but yesterday i installed CheckNotification (for deleting old/duplicate niotifications..) and my AS stop working...
I tried mayn things from this forum..from switching to "COM connection" with USB switch, unchekd/checked USB to PC option....but nothing help.
When i cradle my Qtek 9100, ActiveSync detect phone...and status Synchronizing is in ActiveSync........but when it gotta be synchroniezd there is an error : ActiveSync cannot connect to the Windows Mobile Device...
I've even tried switch to USB mode (softreset+rec button) to make new ROM install from beginig, but I can't...i get error... ERROR 260 Update Error.
I'm not shure that CheckNotification software is guilty for all that..buw, before it's installation everything worked OK.
I noticed a few things..
when i cradle phone and my ActiveSync is in status Synchornizing...there is no sync sign on ma PDA in Start line as usually
my Contacts dissapeard
my Tasks/Appointments dissapeard..
I hope...i didnt' fuc*** up my PDA.
Any help? Please.....
Thank U very much!
Luka
Click to expand...
Click to collapse
i had the same problem and i did the following and solved the problem:
1. uninstall outlook (2003 or 2007 or other)
2. uninstall active sync
and after that reset computer and hen install
1. outlokk
2. install activesync
and u r donw. U can backup outlook files or sync again !! but it will solve the problem because sometimes he active sync misses up with exchange seerver and doing the following steps will solve the problems !!
I already tried that...i even trie updating from bootloader from other comp...but nothing....can I update ROM from SD?..and how ?
Hi,
i have upgraded to WM6 to Tofclock's version and all was fine, now i cannot sync with either of my PC's running XP and Vista. i get a "device not recoginsed" error message and my Himalaya has locked up?? is there another way of going back to WM2003 ?
any help would be greatly appreicated.
You have a activesync 4.5 ???
problems!!
i am using active sync on my laptop running XP and i've tried windows mobile device center on my PC running Vista. if i thought it would work i'd hook up my himalaya to my Wii..... ?
try going to settings>connections>USB to PC and enable the option if it isnt n if it is try disabling it.
make sure u are connecting ur USB cable directly to ur PC not via a hub..also make sure if ur Connector is soldered in the right place..maybe its broken or moving..some times i also get this type of error..try to softreset also and restart ur windows too
problems !!
thanks guys all sorted, it was the "usb to pc" link that was unticked.
thanks again
Hi,
I was trying to update my O2 XDAii with c-shekhar's WM6. So I entered into Bootloader Mode, connect it up to PC via USB and XDAii shows "USB". So I ran the HimaUpgradUT....
But the screen just stays at "Checking the information on your PC..." and the program does not do anything after that.
I have tried to use different USB ports, cables, but no help.
Would anyone be able to help me with this?
(I'm using Win XP SP2. Bootloader is v1.03)
Thanks for any help.... Really want to revive my O2 with WM6
Thanks
Jimmy
Singapore
please try to run hmaupgradeut_noid and make sure u connect it directly to ur pc not via some hub or extensions
good luck
Hello everyone. I have the kaiser from 3 months. I didn't use it the last month and when I plugged to the pc usb it show me some crazy stuff. My baterry was empty when i first turn it on now, but it gest charged with the pc usb.
I am using l26 v8 light ROM - http://forum.xda-developers.com/showthread.php?t=400118:
R 1.58.25.17
G 25.69.30.05H
D 3.28.00.00
The hard-spl is v3.29 .
When i first get it now, what I did first was to format the SDHC 4gb card cause i saw a new version of the leo's rom. Then I turn the Kaiser on and saw the empty battery. I did 3-4 hard resets, preinstall my windows, preinstall m$ activesync 4.5, tried on another pc but still the same. I don't put any sim card to it. Still nothing, any help ?
Hard reset :$
This was only option for me.
Or try other usb port, or on other deviece.
sorry to ask this but did ur mini usb cable is in good condition ?
have u tried to flash ur stock rom & try to connect with ur PC?
my mini usb is in good condition. i have 3 and tried them all.
I haven't tried to flash my stock rom for 2 reasons- i don't know where to get it from and secondly how could i flash it without usb connection ? Error 260 then i try any ruu.exe files ;(
edit: i have some soft on my sdhc which i formatted first and then turn on the phone from a month with an empty battery- could that cause something ?
hang.tuah said:
sorry to ask this but did ur mini usb cable is in good condition ?
have u tried to flash ur stock rom & try to connect with ur PC?
Click to expand...
Click to collapse
Try what Hang sad, and check in Activesync if USB conections are alowed if u can try another usb cord. Wich Windows do u use?
of course u can use ur SD to flash ur rom. card reader will help. for more info maybe u can read the wiki there were many stock rom available for download.
@theclear tried it with 3 different mini usb cables, on 2 PC,on the first pc I preinstalled the windows xp. All PCs are running winXP.
@hang.tuah my kaiser is from orange UK, which rom do you advice me to flash from ???
and another question, when i put a stock rom would i again install the hardspl and the other stuff or once they are installed there is no reason to do that ?
So flashed a new rom - [June 25] L26_KaiserDiamond_V9 (new source!) and again it still the same problem ;( What if I flashed another ROM ? Not a stock rom but another ?
1.71.09.01 install this rom now and it is still the same ;(
i would try to connect it to another pc to make sure that some paranoid 3th party program you installed dident decide to black devices trying to connect using usb
Rudegar said:
i would try to connect it to another pc to make sure that some paranoid 3th party program you installed dident decide to black devices trying to connect using usb
Click to expand...
Click to collapse
this is the second pc that i try to connect it, with the first pc i preinstalled windows and still nothing ;(
edit: now installed an orange rom win wm6.0 still the same problem ;(
people, now find this post http://forum.xda-developers.com/showpost.php?p=2358041&postcount=43
looked mine and the pin is not in its place. may be that is the cause. mine problem is the same - the second pin -how possibly i could pick it up alive :S
OOOK finally how it work with a knife modifying The black thing of the usb was able to pul it down and get the thing up again. 10x vary much !!! !!!
Hi, I've an Ba with WM6.5 in it. But when I want to reflash it, the BA wasn't detected by my computer. I've put it into the bootloader mode, but it just shows Serial, even I've waiting for almost 2 hours. But when I boot the OS, it can connected to the PC via ActiveSync. What's going on here?? Is my BA or my cradle broken??
are you running XP if so open CTRL ALT DEL then look for wscesscom or somthing and end task and then WcessMgr OR somthing and end task and try
You should see Troubleshooting in the WIKI ~ http://forum.xda-developers.com/wiki/ActiveSync
I've done all of that, but still not working. I think it's not in the activesync, because I can connect my BA to the PC, the problem looks like in the bootloader mode.... It just standing there shows "serial" and "V2.07", even I've connect it to the USB port... Any ideas??
Is there are any possibility I can repair my bootloader (if it's really broken)??, or Can I reflash my BA with other way around?? Without using the bootloader maybe??
UPDATE:
Later, I think I began to recognize the problem...
In every tutorial for Win7 that I read (this tutorial and d-two's tutorial), I was ask to update the driver of "Microsoft USB Sync". But in my case, that "Microsoft USB Sync" wasn't shown. I think it's because I haven't sync my BA with the PC yet (I've just reinstall my Windows, so all of the setting is gone). If you sync your BA, you will get the "Microsoft USB Sync" on your device manager.
But now, the problem is, I can't sync my BA with the PC, because of error in my PIM (Contact, Calendar, Task, Phone, Messages, etc). I only able to explore my devices through ActiveSync/Windows Mobile Device Center, not synchronize it. Even my ActiveSync/WMDC shows an error on the connection. So, I can't update/install the driver for "Microsoft USB Sync", because my BA have an error connection with the PC. Any ideas to solve it??
And would cloning method worked for my devices?? I mean, I get a cloning from another BA, install it in my BA, and then repeat the reflash process with my preferred ROM??
Please, need help over here....
try a hard reset
Broken Power Switch ...
Dear experts,
My device is PDA2K, last week i did upgrad from original windows to WM6.5 Pro_QVGA, Radio 1.12.00 ...... but the power switch is broken
..... as your experience how did that happened!!!! it was on cradle connected to WinXP, but since that day i'm trying to do flashing to install another Windows ...... i failed ...
Please Please Please .... Help me to do flashing or formating from pc or sd card ... because i'll never get into bootloader in my life.
Thank you ...