Hi...
I have following Problem:
I'm stuck at diagnostic mode... (I used the DFRouter app found over at HD2 WP7 Forum)
Then my HD7 got relocked and now i cannot come back to Zune Mode...
The only connection i have is over QXDM or QPST...
Is there a command in QPST to get back into Zune Mode?
hope someone can help me...
Related
before you flame me, i have looked into this. i did the diag work around. Tried to install the Diag.inf(that came in the HTC HERO driver pack) by right click(told me it didnt install that way). Installed HTC sync and let it install drivers, and went into DM mode by ##3424# on my HTC HERO!
i found a driver install for XP/Vista but none for Windows 7. Its called QDhtc.msi
DOES anyone have this for Windows 7 or could someone tell me a walkthrough to bypass it? i can get the Phone into Dm mode(diag mode) but i cant get QPST to recognize the phone in the ports part.
IM trying to flash the phone to cricket(and have done many phones this way) but for some reason i cant get this one down. I was wondering if it would be best to just install Virtual PC(w/ XP mode) on the computer and install that MSI that way?
If anyone has any suggestions or ANYTHING i would really appreciate it!
anyone? i got the phone rooted finally(i think). i now have a custom recovery menu i just cant get the SPC(msl) due to the DIAG DRIVER THING!!
t12icky0 said:
anyone? i got the phone rooted finally(i think). i now have a custom recovery menu i just cant get the SPC(msl) due to the DIAG DRIVER THING!!
Click to expand...
Click to collapse
There's a thread around here somewhere that tells you how to get the MSL via logcat. Or you can call Sprint and tell them you're manualy updating your PRL and need your MSL.
i am having the same problem and im getting frustrated. PLEASE..... some help?!?
what i did was install fresh toast 2.1(or any ROM) and then run the Logcat to get my MSL. I had to run a virtual XP to get the driver thing going. After i installed the virtual XP i just installed the drivers on XP and it worked like a charm.
I tried many options but still I cannot connect to zune in Windows 7.
1. I tried using Original Cable
2. Microsoft Help also didnt work.
3. Formatting the phone also not worked.
4. Reinstall zune also didnt work.
5. I updated to NoDo Rom, still cannot connect with zune.
When I connect the phone, 2 unknown drivers appear in device manager. When I update them, it says no update availabe...
I want to connect my phone to zune , any1 R&D masters plzzz. help if ??????????
Thnks in advnce..
http://support.microsoft.com/kb/2410180
Microsoft 'FIX IT' which is in the article is really good to fix most problems atomatically
tfn said:
http://support.microsoft.com/kb/2410180
Microsoft 'FIX IT' which is in the article is really good to fix most problems atomatically
Click to expand...
Click to collapse
It also didn't help..
It said Zune or My Device could not be recognised.....
tttt9999 said:
It also didn't help..
It said Zune or My Device could not be recognised.....
Click to expand...
Click to collapse
send to service centre.
Zune doesnt recognize HTC HD7... Plz Help ???
i had the same problem. ur hd7 is stuck in diagnostic mode. i sent mine to HTC and they replaced the MB.
send to service centre like mine they'll change new mainboard PLUS you get a souvenior (htc pen,htc magnet,and htc glass)I sent it trice and get trice souvenior.(depends on country).
try this
hile trying to diconnect my phone it was saying phone was used and lokking for the servise sing it i found this.and it worked for me,press like if it worked
Hey guy,
I have been searching and trying to fix this since yesterday and i did not find the solution,
I need adb to s-off my htc one, and the problem is whenever I plug my mobile into computer in normal mode or in bootloader mode and also in fastboot mode, adb is not finding my mobile, like when I type adb devices, it came with adb attached devices only, and not showing my mobile.
and by the way, fastboot is working perfectly, its only the adb !!
I installed the drivers many times and in many ways like pdanet and manually, and also htc sync.
I installed Android SDK and updated the platform-tools to last one.
anybody has a solution for me?
thanks you,
MohammadZkert said:
Hey guy,
I have been searching and trying to fix this since yesterday and i did not find the solution,
I need adb to s-off my htc one, and the problem is whenever I plug my mobile into computer in normal mode or in bootloader mode and also in fastboot mode, adb is not finding my mobile, like when I type adb devices, it came with adb attached devices only, and not showing my mobile.
and by the way, fastboot is working perfectly, its only the adb !!
I installed the drivers many times and in many ways like pdanet and manually, and also htc sync.
I installed Android SDK and updated the platform-tools to last one.
anybody has a solution for me?
thanks you,
Click to expand...
Click to collapse
lol, do you have usb debugging turned on in developer settings? and what version is your bootloader? if its 1.54 youre SoL. No soff yet for that one. only 1.44. (but if you soff 1.44 then upgrade to 1.54 it WILL survive.)
Dear xda developers ,
Since some time i have a new phone the htc one . When i got my phone it worked perfectly when i attached it to my computer , and also to my laptop. But recently it when i connect it to my computer it gives me this message:
USB DEVICE NOT RECOGNIZED : one of the USB devices attached to this computer has malfunctioned , and windows cannot recognize it. for assistance in solving this problem , click this message
I got everything on my phone settings and so on in right way. I allready got alot of android phones and i know everything about it , It doenst connect to my laptop ether same message . After contacting HTC Service , sending it to someone who can fix it has no use and i wil waste my money . At least that is what they told me. I reinstalled drivers , i updated my phone and i buyed new cable's to try them out, nothing works.
So my question is: Is there a way to fix this ? ore is this defenitly a hardware problem
Thanks for ur time allready!
Greetings from holland
Daan
Hmm have u recently installed Windows 8.1 on ur pc?
I faced similar kinda situation when I upgraded from windows 8 to Windows 8.1 preview
Sent from my HTC One using Tapatalk 4
Have you tried it with enabled USB Debugging in Developer Options?
I got , windows 7 on both computers .
USB debuggin is enabled.
I want to bump my post because i really need to have a good usb connection for rooting and so on please anyone?
get another cable, its fooked
Mine has gone back to htc but I've had to leave the bootloader unlocked and s-off as cannot connect to pc . It's got stock recovery and Rom but bet warranty is void now .
Sent from my HTC One X using Tapatalk 4
Hello guys,
Even though I am a member of this site for a few years, this is my second post.
Recently, I decided to root my HTC Desire 500. I am a newbie in this topic, ( even though I rooted 2-3 devices, but they were old, so I just used SuperOneClick or Z4Root) so I tried to google it, and found some pretty good guides, but I always faced problems. One guide what I was following is this one: http://forum.xda-developers.com/desire-500/general/how-to-root-install-cwm-twrp-install-t2804938
So first, I tried to unlock the bootloader. I headed to this site: http://www.htcdev.com/devcenter and followed the instructions. I installed the HTC sync as well. I turned off my phone, and launched the bootloader mode. The HTC sync popped up, and scanned my music, but in the left corner I saw a sign: No phone connected...
That was prety worrying for me, but after that, the Windows told me that it can't recognise the connected device. I continued anyway, downloaded the fastboot binary,but I got another error when I tried to run the "fastboot oem get_identifier_token" command, something like: the program can't launch because the AdbWinApi.dll is missing, then it just stopped working. I quickly grabbed the dll from the internet, and ran the command again, but I got another error message: <waiting for device>, and now I don't know how to continue. I tried plugging my phone in when it was turned on, and now everything recognised it, so somehow when it's turned off, the Windows can't identify it. USB debugging is turned on, and fastboot is turned off in the phone's settings. Some more info, that can be helpful: this is what I see in bootloader mode:
Code:
****LOCKED****
Z4U PVT SHIP S-ON RL
HBOOT-1.01.001
RADIO-14.08.36Q4.26
OS-1.10.401.3
eMMC-boot
Aug 1 2013,15:50:50.0
It's a single SIM version.
Maybe the android SDK is missing, as I later noticed, so I headed to this site: http://developer.android.com/sdk/index.html , and clicked on "Installing the SDK", but now I don't know which one should I install: http://i.gyazo.com/5aaf558bfceea91b15963ebaa2351368.png or maybe I have to download something from here? http://i.gyazo.com/221bab07354c3f60675cd3e492d15e65.png I have no idea...
As I told before, I am a beginner, so please be detailed when replying, and I am sorry for wasting your time guys if it's that easy, but I was unable to find the solution... I also have several other questions in this topic after solving the problem, so please stay in touch with me. Any help would be really appreciated.
even i faced the same prob...waiting to see if someone replies..
update: Hey bro, are you trying in windows 8 or 8.1? I was trying on the same. But now I tried with Windows 7 and it is successful. The issue here is when the phone is in fastboot mode windows 8 is unable to recognise the device. In windows 7 it does. try this,
Akhyll said:
even i faced the same prob...waiting to see if someone replies..
update: Hey bro, are you trying in windows 8 or 8.1? I was trying on the same. But now I tried with Windows 7 and it is successful. The issue here is when the phone is in fastboot mode windows 8 is unable to recognise the device. In windows 7 it does. try this,
Click to expand...
Click to collapse
I realised this as I tried to find a fix myself. Thanks for the update tho