Database Develop

Boot loop

And now I'm boot looping won't go past n color startup animation wth
Sent from my Cyanogen Mod EVO using Tapatalk

I had that problem on my NC when it was rooted. Luckily I had another problem that let me get out by the 8 times reset manual method. Mine would occasionally update itself back to version 1.0.0. When it did that I managed to reset it & now a new NC is on its way to replace this one.
This probably won't help solve the issue but at least it lets you know you're not alone.

Mine boot looped and I did the full 8X reboot thing and then the 3 button data reset. All of that puts you back to "out-of-the-box" stock. You can then redo the autonooter rooting procedure.

Can't get out
I am stuck in a boot loop and cant get out.
First it was stuck on the droid boot animation from the auto config. After I put the autonooter card back in it started looping the rooted boot animation.
Did the 3 button thing and that forced an update but went back to bootlooping the rooted animation.
Then did the 8X reboots manually and that also forced the down arrow update, but then it still bootloops.
I tried getting in from PuTTy (as admin) but it never connects. Do I just use port 22? (to 192.168.2.2 with Data and username as root?)
adb doesn't work... going to bed now and will try again tomorrow after work.

What i had to do to resolve my issue was that was to do the 8x reset to trigger the factory reset of the OS and then do the 3 button reset of the user data. In my case it was a self tweaked issue with an app permisson. If I remember right the key combo is Power+VolUp+"n" key. Try this and let us know.
Sent from my NookColor using XDA App

Bigger Issues.... First Brick?
Nate731 said:
What i had to do to resolve my issue was that was to do the 8x reset to trigger the factory reset of the OS and then do the 3 button reset of the user data. In my case it was a self tweaked issue with an app permisson. If I remember right the key combo is Power+VolUp+"n" key. Try this and let us know.
Sent from my NookColor using XDA App
Click to expand...
Click to collapse
So ... I left my Nook in what I thought was an "OFF" state last night, only to bring it to work and find it says "Battery too low to Power on" "Please wait 15 minutes and try again"
I think... no worries... plug it in and let 'er sit for an hour.... an hour passes and I'm still getting the same screen.
Is this better or worse? let me see...
1) if it stays like this, I can return/exchange it at B&N and they won't be able to verify that it was rooted due to non-bootiness
2) If it eventually boots, I will have to try to get it out of bootloop.
3) If it comes to life and I can't get it out of bootloop, I will drain the battery again and go back to #1.
Any thoughts besides this current train?

sort of working?
OK....
so after charging on USB port (all I have at work today as I forgot the base to the charger), it will bootloop again... yay!
problem is... the bootloops take too much juice and won't allow me to fail 8 reboots. I can't even charge it up enough since I'm on USB charging and it keeps trying to turn itself on.
2 Options i see:
1) Go home and charge it on the wall and see if that helps
2) Discharge it to death and return within my 30 days (X-mas gift)

Doubt this will work, but have you tried putting in an autonooter sdcard and then plug it into the usb? If it tries to boot maybe it will boot from that sdcard?

Boot from the Froyo SD card, then fix /rom/devconf/BootCnt from ADB.

Cal you never mentioned if you cleared the user data... Did you?

Nate731 said:
Cal you never mentioned if you cleared the user data... Did you?
Click to expand...
Click to collapse
If you mean the 3 button reset? Yes.
If not... I did not because I'm not aware of it. (couldn't through the UI of course)

cal3thousand said:
If you mean the 3 button reset? Yes.
If not... I did not because I'm not aware of it. (couldn't through the UI of course)
Click to expand...
Click to collapse
Try Geezer's tip but do this:
Do three button reset WITH the autonooter card in there.

Got it working
Finally got it working after creating a Nookie Froyo card and booting off of that.
Then I reinstalled ADB on my work computer and reset the BootCnt file to 8...
that successfully restored /system and then the 3 finger trick actually gave an option to wipe.
Now to start over.
New Question: How likely is this hardware related and should I be looking to replace it before my 30 days is up>?

I ran into the same problem, trying the same solution - any luck the second time?

JasonBunting said:
I ran into the same problem, trying the same solution - any luck the second time?
Click to expand...
Click to collapse
My Nook has been great since the fix. But I also needed to use a program to turn off Wifi when I turn the display off.
I did it all from my Nookie...

confused?!
I was wondering how you fixed this..i have read everywhere, but nothing...im stuck in the nook co screen. This happened right after i plugged my nook to charge after my battery was drained...thnks

Help ds7 stopped woring

everthing stock.
2.2.2, wifi version
i cant delete any apps. i tired deleting apps & nothing. I also tried moving them to sd and den formatting SD and same thing. nothing gets deleted. Also formated internal storage and nothing gets deleted. After turning on & off tablet i am able to use it a couple mins then i get "sorry....something something...please try again" and the have to tap on "force quit"
When i select to turn on wifi it just stays light green doesnt turn bright. when i go to settings for wifi. i get "error" on it.
1) did a hard reset. vol + & power button, then selected (1), everthing still the same. notin gets deleted
2) soft reset privacy >> factory reset
3) also tried going into safe mode. power on and waited for 2nd dell logo and press & hold 'settings button'' til safe mode show up. but only for about 1-2 secs and then it jus it virbates and goes back to the 1st logo keeps doing this til i let go. which then im able to see 'safe mode'' words. but then screen turns off and turns on without safe words on it.
what can i do?

could I ask what you did just befour this happened because it sounds to me that your dell streak is in read only

rickwyatt said:
could I ask what you did just befour this happened because it sounds to me that your dell streak is in read only
Click to expand...
Click to collapse
I had to send mine to Dell for repairs because it was in read-only mode. Does anybody know how it goes into this mode? Is it just a random event, or does it go into this mode after certain events take place? It sure seems like this happens to the Streak 7 far to often.

what i would like to no dose this just happen to peoples sk7 with clockwork recovery installed or without

rickwyatt said:
what i would like to no dose this just happen to peoples sk7 with clockwork recovery installed or without
Click to expand...
Click to collapse
if its in read-only mode i have to send it dell to get it to work again or is it possible to fix it myself? Well recently i didnt do anything to it. the most recent thing i did was download some apps but that was about 2 weeks ago (maybe a lil less). those apps were from pocketlengends, where u get free platinum in the game if you download those apps. but tablet worked fine after i installed them.

Could someone with a bricked dell try to run this fsck_msdos -y /dev/block/mmcblk3p3 with adb

james_larson2001 said:
if its in read-only mode i have to send it dell to get it to work again or is it possible to fix it myself? Well recently i didnt do anything to it. the most recent thing i did was download some apps but that was about 2 weeks ago (maybe a lil less). those apps were from pocketlengends, where u get free platinum in the game if you download those apps. but tablet worked fine after i installed them.
Click to expand...
Click to collapse
Once you tried the factory reset from within Android (in the settings menu) you went into Read Only... its a known issue....
The ONLY thing you can do is send it to DELL for repair

cdzo72 said:
Once you tried the factory reset from within Android (in the settings menu) you went into Read Only... its a known issue....
The ONLY thing you can do is send it to DELL for repair
Click to expand...
Click to collapse
I have reset mine from within the menu, right after I got it. No problems.
Sent from my Dell Streak 7 using xda premium

stevedebi said:
I have reset mine from within the menu, right after I got it. No problems.
Sent from my Dell Streak 7 using xda premium
Click to expand...
Click to collapse
I HAVE to say you are one of the lucky few that could... I have seen 7 Streak 7s that belonged to friends that all Hasbro be sent in becausenof it... I wouldn't keep pushing your luck though...

cdzo72 said:
I HAVE to say you are one of the lucky few that could... I have seen 7 Streak 7s that belonged to friends that all Hasbro be sent in becausenof it... I wouldn't keep pushing your luck though...
Click to expand...
Click to collapse
As it happens, I used the power on sequence to reset the next time. Anyway it is a mysterious thing.

since the tablet works for a lil it what if the notification for the honeycomb updates shows up? will upgrading get it out of read only mode?

It would be hard for me to believe that the update to Honeycomb would fix that. BUT I would not rule it out, it's a very interesting theory, but I wouldn't get my hopes up seeing as not even the NVFlash method will bring the Streak out of Read Only mode, nor the NVFlash method to put Honeycomb on it will revive it, but there is always the chance the Honeycomb update would address the issue, I mean it would actually benefit DELL so they wouldn't have so many being sent back, but big companies don't always do what's best for them, much less the consumer. BUT keep your fingers crossed, although sending it off to DELL you would have it back in 14 days, I understand the Honeycomb package rolls out the 7th of October but that remains to be seen

Please help. My phone won't start

I just bought the phone and using LGmobile update. It downloaded a file about 420mB and in the process update I got a message problem communicate with your phoneme. please disconnect take phone out etc.. and turn phone on and connect.
I follow the instruction but my phone won't turn on regardless to what I do.
Please help.

Sorry wrong paste..lol ..here is right info...
Check Device Manager for the current active "COM Ports"
Boot into DOWNLOAD MODE Plug the phone into the computer without the battery inserted Hold [VOL UP + POWER] Put the battery in and wait until it vibrates or for 3 seconds Check Device Manager for a NEW "COM Port...from dark lestat post in development... make sure to thank him
Then you should be able to re LG flash
Sent from my LG-P920 using xda premium

Keep having problem PC doesn't detect phone. Unplug, remove battery etc...so frustrated. Now everytime turn phone off I have to plug power cord in order for it to turn on. How do you do factory reset?

Give this thread a try ..follow exactly ....make sure battery has a charge and is not borked...these phones seem to have battery issues. If bat is good this is the info you want..seems like a lot of work but it is what worked for me. dark lestat is very knowledgable and helpful regarding these things. Hope this helps you..
Guess I should include link...lol.
http://forum.xda-developers.com/showthread.php?p=22417769
Sent from my LG-P920 using xda premium

Follow every step but got stuck when it trying to flash and stop at 20% just like when I update using LG software. Order new battery hope fixing the problem. My first LG android phone can't return bought it on craigslist

Hopefully the battery will help...good news is if you can connect and start the flash each time it is not bricked...i have not seen this problem posted before so doubt it is hardware...does adb see it...if so i would try to wipe system and data and reflash...i would also pull sim and sd card before flash to see if that helps ?
Sent from my LG-P920 using xda premium

Replace the battery with new and same problem, my phone doesn't even read my AT&T sim card.
Any button that I can do hard reset?

I had this same problem is your phone not turning on or just not downloading the update? I bricked my phone installing the update and it can be fixed but if you having problems with the connection during update you gotta keep trying it will go through. If it wont turn on at all there is a fix.
Sent from my LG-P925 using Tapatalk 2

This is the problem:
1. I bought new phone on Craigslist running 2.2 and everything working.
2. Connect to PC and set up driver, software etc.. there is an update so I did.
3. Got stuck about 17-20% and message disconnect and re-reconnect etc.. and I did.
4. Ever since I can't t urn it on unless connect to a charger.
5. I will not read SIM card and kept saying reorganized when check on setting and mobile network.
I am stuck here cause tried so many time. Also, phone turn off with full battery charge but next morning when I turn on completely drained. I think software screw up some how during the initial upgrade. Just don't know how to fix it

OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2

As far as the update goes I eventually did get it to work. Just keep trying. I plugged it in to try again one time and it said my phone was already updated. I went and checked and sure enough it was. The visual change isn't dramatic your signal bars turn green and you get some more bloatware like a 3d game converter. The reason for this is the phone has a custom LG UI and will not adopt the gingerbread UI. Don't freak a lot of people insist its not GB but it is. There is a lot more to a OS than the user interface.
Sent from my LG-P925 using Tapatalk 2

Warranty thru LG or at&t? You mind give a little more. I didn't even know LG has a warranty in US?
Sent from my LT26i using xda premium

The warranty is through LG at&t wont do anything for you cause they will know you got it off CL. You'll need your imei and your s/n from under your battery. I wouldn't tell them you got it off CL. The only way this wont work is if the previous owner registered the phone with lg which is unlikely since they didn't even have the GB update. Call 18002430000. Again do not tell them you got it from CL. The phone is under a year old and they will do it for you. If it has to be told that it isn't yours say you had a step brother or friend give it to you. They will want a reciept but you can tell them you tossed it all and your imei Ans s/n will be enough. Also tell them it happened using their support tool. Good luck.
Sent from my LG-P925 using Tapatalk 2

PROlific666 said:
OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2
Click to expand...
Click to collapse
I got panic and it's in local shop if they can repair it but will take it back and try. Thanks.. at least someone here tried to help me... the link flash back to stock ROM didn't work for down load so I can flash it. I even root and flash custom ROM still didn't work now I want to flash it back to stock... if you can just help me a little please

download mode: I got a little confused cause someone told me take battery out connect phone to PC and put battery back. Yours didn't mention anything about put battery back in

Yeah when I did mine it wouldn't turn on at all even when it was plugged in so I think i left my battery in and did it bc it wouldn't respond to anything. I would try to get it to recognize with the battery in but if it turns on after you do plug it in then it will need to be out. You can try to put the battery back in after the computer and the LG support tool recognizes your phone bc after it gets done it reboots. I'm not sure if the battery is needed for it to work but mine was in but you can try it multiple times with it in and out. I freaked out too I had just bought the phone off CL and plugged it in to update and it had the connection failure a couple of times and then poof nothing no vibration no boot screen nothing. The LG people tried getting me to do a hard reset and when that wouldn't work she told me I would have to send it in and that it was still under the manufacturers warranty. I was desperate to say the least so I tried all kinds of combinations. The key is to get your pc to recognize your phone while it is off. If you can do that with the battery in I would try it that way first. If you don't have the box you will need to copy down the phones info, (IMEI and S/N) which is under the battery, for the recovery phone part of the support tool. It worked for me so I hope you have some luck with it. Also I would consider waiting until the ghost call thing gets fixed before you go to gingerbread. If I had known I would have stayed with froyo until they fixed it.
Sent from my LG-P925 using Tapatalk 2

Ok I tried everything and it doesn't work. I now need to flash back to stock rOM using recovery. I need the file Thrill Stock ROM zip file and the link on forum about flash back to stock no longer working

I had the same thing happen to me. U hold down "volume down" and power button, when the phone is off and that will put it into android dfu mode. Now select factory reset and Press menu button.
Sent from my LG-P925 using xda app-developers app

Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.

Cab121 said:
Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.
Click to expand...
Click to collapse
I dont' ask for donations.
It's just courtesy.

Nexus 4 stopped working during update..

Hi guys,
Very strange problem, just got my Nexus 4, it prompted me to update. It was plugged in, charging, I let it restart to update and it simply never came back on. It didn't do any of the Android update process (with the Android on screen), just shut off, and never woke up again.
I've tried holding down volume + power, and the only thing that happens when I do this is the LED notification light flashes red for a few seconds then turns off, then repeats 10 seconds later.
Has anyone got any ideas of what could be the problem, any troubleshooting tips? It seems to be turning on in some way but not properly in that when I plug it into my Windows machine, it starts to install drivers, but still no real sign of life.
Otherwise, looks like I'll be sending it back and waiting weeks for a replacement..

Trying pulling the battery, oh wait...

Qassim said:
Hi guys,
Very strange problem, just got my Nexus 4, it prompted me to update. It was plugged in, charging, I let it restart to update and it simply never came back on. It didn't do any of the Android update process (with the Android on screen), just shut off, and never woke up again.
I've tried holding down volume + power, and the only thing that happens when I do this is the LED notification light flashes red for a few seconds then turns off, then repeats 10 seconds later.
Has anyone got any ideas of what could be the problem, any troubleshooting tips? It seems to be turning on in some way but not properly in that when I plug it into my Windows machine, it starts to install drivers, but still no real sign of life.
Otherwise, looks like I'll be sending it back and waiting weeks for a replacement..
Click to expand...
Click to collapse
Call Google, they set up a call center for these exact types of questions.

Yep looks like I'll have to.
Just thought I would check here in case anyone knew any troubleshooting methods that might bring some life back to it.

Oh dear..

Qassim said:
Hi guys,
Very strange problem, just got my Nexus 4, it prompted me to update. It was plugged in, charging, I let it restart to update and it simply never came back on. It didn't do any of the Android update process (with the Android on screen), just shut off, and never woke up again.
I've tried holding down volume + power, and the only thing that happens when I do this is the LED notification light flashes red for a few seconds then turns off, then repeats 10 seconds later.
Has anyone got any ideas of what could be the problem, any troubleshooting tips? It seems to be turning on in some way but not properly in that when I plug it into my Windows machine, it starts to install drivers, but still no real sign of life.
Otherwise, looks like I'll be sending it back and waiting weeks for a replacement..
Click to expand...
Click to collapse
I've no intention to frighten you. Had similar problem with lg optimus one. Instead of boot, light just flashed for few times and static snow appeared on screen. Service said that it was motherboard failure.

Are you holding it wrong?

As the front and back both have glass..... are you sure its not turned face down?
Sorry I couldn't resist. Hope you get it sorted, and yeah the Google helpdesk is first place to start
Sent from my GT-I9300 using xda premium

if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..

pparavas said:
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
Click to expand...
Click to collapse
Would this void warranty?
Sent from my SAMSUNG-SGH-T769 using xda premium

pparavas said:
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
Click to expand...
Click to collapse
Usually every phone that have a inreplaceable battery can similete a battery pull pressing powe button and vol up + down for about 10 seconds

pparavas said:
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
Click to expand...
Click to collapse
Pretty dumb suggestion for a new device.
Can you get to a recovery menu? Download Mode? Anything?

feedtheducks said:
Would this void warranty?
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
No as far as i know and read everywhere.. check this link... i also saw on android central.. that you could keep holding the power button for 10 seconds for it to restart
http://www.technobloom.com/nexus-4-...eplace-xda-warns-of-potential-danger/2218834/
---------- Post added at 11:05 AM ---------- Previous post was at 11:04 AM ----------
feedtheducks said:
Would this void warranty?
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
bowenac said:
Pretty dumb suggestion for a new device.
Can you get to a recovery menu? Download Mode? Anything?
Click to expand...
Click to collapse
Thanks for your comments... I never mentioned that its a good suggestion, all i thought was to help a guy in need, sorry if you felt bad..

pparavas said:
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
Click to expand...
Click to collapse
No. This is a brand new device with full warranty.
Call support and see what they say.

t0ph0id said:
Trying pulling the battery, oh wait...
Click to expand...
Click to collapse
lmao :laugh:

Ok, I think I've solved it.
I did a bit of searching for similar problems on LG devices, and found a thread on Microsoft.com about an LG Optimus 7. (Do a search for 'LG optimus 7 not turning on' (top result) I can't post links yet).
Yes, a LG Windows Phone device.
I unplugged the device, held down Vol up and Vol down + Power for around 10 seconds, then plugged the device back in and it booted up. The problem is, it is doing this every time and sometimes this method takes a few tries to get it working.
Once the device boots up, it is fine, but this means I can't install the latest OTA update as when it goes to reboot to install, it just falls over, and to get it to start again you need to essentially do a hard reset.
The good news is that I can probably wait a few weeks for the stock levels to replenish before sending it back so I'm not waiting too long without it.

This happened to me at the store yesterday thankfully they were able to call another store before they opened and hold one for exchange seeing how you fixed it I'm glad I wasn't able to resurrect it right then and there
Sent from my Nexus 4 using xda app-developers app

[Q] Boot Loop while charging - no charge

Hello, I've had my G Watch R for not quite a full week so far and I've really enjoyed it. Two days ago, I believe that I let the battery die so I placed it on the charger before going to bed. When I woke in the morning i grabbed the watch off the charger without looking at it. Just before i stepped out the door i noticed that it wasn't waking up and It wouldn't even power on. I ran back and slapped it on the charger thinking that it would be more than charged by lunch time. Thats when i noticed the apparent boot issue you can see in the video attached. It hasn't been dropped at all and I have the basic apps installed; facer, watchmaker etc. At this point, Is there anything that I can try short of sending it back?
I've left it on the charger for 24+ hours, it gets slightly warm and stays in the boot loop. As soon as its taken off the charger it has no visible charge and refuses to respond to anything. I purchased it through amazon, so I'm thinking it shouldn't be an issue for me to return it...
http://youtu.be/GgF3iXAhTTI/
Sorry i tried to embed the video but the youtube link for xda seems to be breaking the url somehow

So I have already initiated the return process with amazon and it should be pretty painless. I have almost 3 weeks to send it back, so if anyone has any tips/tricks or ideas I'm more than open to try them....The watch is 100% stock as far as firmware or root is concerned.

Any luck with this? I just got back an RMA for a broken touch sensor, I don't want to have to RMA it again.

try to see if you can get in to the bootloader, and restart the watch from there
i have notice when i charge the watch from empty (so thewatch boots up while charging) it causes problems, usually boot loops as well

I just watched the video (should've done this before hijacking the thread, sorry) and it seems like I'm having a different issue. Instead, mine does the android boot animation, the goes to "Starting Apps" and counting ("x of y Apps"; the y value seems to be different every time), then "Staring Apps" with no count, then it says "Powering Off" and shuts off. But I will post my experience in case someone else with my issue finds this thread.
I'm back up & running today. I got it into the bootloader last night and put it on the charger before I went to sleep (to avoid battery rundown by bootlooping while it charges). I woke up this morning to it bootlooping again. I'm guessing that it restarted itself sometime during the night. I took it off the charger and let it sit for a while (it was pretty warm, so I figured it would be better to let it cool down before trying anything else). I tried to restart it again after about a half hour, but it still only got to "Starting Apps" before shutting off. I reflashed the stock boot, recovery & system images found here: Stock Boot, Recovery and System for G Watch R . I restarted it and completed the initial pairing process (due to wipe when I unlocked it in order to flash system image) and it is now working.
I don't know if what I did actually fixed anything or if it just decided to start working, but I will post again if something happens again. If you don't see any more replies from me, then all is still OK.
EDIT 6/22/15 9:53 pm EDT: No good, see below.

To workaround the bootloop while charging, you can boot into recovery (swipe 10 to 4 a clock while Logo is shown, select and press okay to recovery), than charge battery for a while, after that, you can boot to as normally to AW-system and charge to fully battery!

You can charge with USB on PC, it's work fine for me.

scidon37 said:
I just watched the video
I don't know if what I did actually fixed anything or if it just decided to start working, but I will post again if something happens again. If you don't see any more replies from me, then all is still OK.
EDIT 6/22/15 9:53 pm EDT: No good, see below.
Click to expand...
Click to collapse
So your gwatch r started doing the same thing again? I have the same problem and it won't connect to the computer via fastboot or adb. How did you get on with the RMA? I cant send mine back due to voided warranty. Still hoping for a solution.

Have you tried taking it off the charger and booting it? Also are you running custom software?

bricked watch
atmosphrericks said:
So your gwatch r started doing the same thing again? I have the same problem and it won't connect to the computer via fastboot or adb. How did you get on with the RMA? I cant send mine back due to voided warranty. Still hoping for a solution.
Click to expand...
Click to collapse
Ever find a fix for this? I've been searching like mad the last few weeks. :/

biohazard1150 said:
Ever find a fix for this? I've been searching like mad the last few weeks. :/
Click to expand...
Click to collapse
So i took off the back plate, and found that the spring contact pins inside the watch weren't making good connections to the connect points on the inside of the back plate. Be careful, they are fragile, but you want to bend them out slightly. If you can source parts, get a new contact pin module.
After this, i was able to connect my watch and flash over stock firmware.
I can't guarantee this is what is happening with yours, but let us know if it does work.
I've scince broken the screen and can't find where to get parts!

atmosphrericks said:
So i took off the back plate, and found that the spring contact pins inside the watch weren't making good connections to the connect points on the inside of the back plate. Be careful, they are fragile, but you want to bend them out slightly. If you can source parts, get a new contact pin module.
After this, i was able to connect my watch and flash over stock firmware.
I can't guarantee this is what is happening with yours, but let us know if it does work.
I've scince broken the screen and can't find where to get parts!
Click to expand...
Click to collapse
I still haven't found a fix. My charging works fine, but no PC connection. The bootloader/fastboot wont come up, no logo or anything. I'm sure the EMMC chip is fried, it sounds like many are seeing this issue, some with a black screen and some with a snowy screen. I've had several galaxy phones do the exact same so I'm doubting it can be fixed without going to the manufacturer which mine came from redflagdeals and LG wont service the random online store purchases

I had to take the back off and clean and adjust the contacts that make contact through the back panel. Then I could connect via fastboot.

ouranos2k said:
You can charge with USB on PC, it's work fine for me.
Click to expand...
Click to collapse
This solved my problem. As soon as I plugged it into my PC it booted just fine

ouranos2k said:
You can charge with USB on PC, it's work fine for me.
Click to expand...
Click to collapse
This works for me too! Thank you!
Sent from my SM-N920C using Tapatalk