Ok, so i have the "power button failure" problem. No more warranty, and the local gsm repair shop can repair it, but doesnt know where the connections go, to make a bypass.
anyone has this manual, or anything that could help me?
thank you
You can't repair it.it needs a new flex cable.
Sent from my Nexus One using Tapatalk
cobrax2 said:
Ok, so i have the "power button failure" problem. No more warranty, and the local gsm repair shop can repair it, but doesnt know where the connections go, to make a bypass.
anyone has this manual, or anything that could help me?
thank you
Click to expand...
Click to collapse
I had this problem recently. Out of warranty. Sent to HTC repair center and got quoted for about $50 USD (given that I'm in Singapore, there is a physical HTC service center that I can go to).
If you want to fix it yourself, you can buy the board from ebay, this is the cheapest of them all, with tools included.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290522246328&ssPageName=STRK:MEWAX:IT
You can follow some disassembling guide from ifixit or this youtube series (very detailed, but to repair the cracked screen instead) to replace the flex cable and board. Should not take more than 1 hour. I planned to do it if the quote is higher than $80, but it's not.
Let me know how it goes if you decide to fix it yourself. Take a few pictures as you go along would be great too.
Easy way to start nexus one with out power button:
1)Plug in phone through USB or wall charger.
2) take battery out
3) put battery back in real fast
Phone should boot on.
Sent from my Nexus One using XDA App
thank you guys for replying, i knew i can replace the board, bu i wanted to see if i can "fix" the flex cable. i gues there are only 2 wires inside it and i need to see where those go. not to fix it myself, but the guys at the shop. i think they can use a "strap", which is a loose wire connecting the 2 points. i dont really plan on using that button very much, i got used to the trackball wake, but, i want it to work, just in case
cobrax2 said:
thank you guys for replying, i knew i can replace the board, bu i wanted to see if i can "fix" the flex cable. i gues there are only 2 wires inside it and i need to see where those go. not to fix it myself, but the guys at the shop. i think they can use a "strap", which is a loose wire connecting the 2 points. i dont really plan on using that button very much, i got used to the trackball wake, but, i want it to work, just in case
Click to expand...
Click to collapse
I've taken my 2 nexus apart, and I can tell you that there is no easy fix.
ok, update
i have fixed it in the gsm repair shop. well, they did
they waited to come in another faulty nexus to check which wires were faulty, compared them, and they put in a new external wire replacing the old one on the circuit board. everything works now. it costed me around 30 usd. anyway, i intend on using trackball wake though in the future, only if necessary the power button
Hi ,
Yes you can repair this problem. Besides the option of buying a new flex cable for 50-80 USD, I found in this very same forum a thread where somebody posted a picture and indications about how to repair the flex that contains the power button.
If you disassemble your N1 and remove the large flex that carries the power switch you will notice that i has two large connectors on the bottom end.
One of these has 44 pins (two rows of 22 pins). In the top row of this connector, counting from the right the pin number 10 is the one that turns the nexus one ON/OFF
The switch does this only by connecting it mmomentarily to ground.
TO FIX IT:
All you need is a fine end soldering iron, a good lens, a T5 screw driver, soldering wire and adhesive tape. And most importantly 20 cm of very thin magnet wire (enamelled copper wire of about 30 to 50 micrometers in diameter (it is thicker than hair do not worry).
Then solder an end of the wire to the pin #10 as counted in the way i described. route and tape the wire along the flex until you get to the switch.
the switch has 4 pins one pair is ground, the others go to pin #10 in the 44 pin connector. The ones that are gong to the pin #10 are actually on the side of the switch that has a golden "[" bracket. Solder the end of the wire that comes from pin #10 to any of these two pins of the switch. This completes one part of the process. (the most difficult).
The back of the board that holds the switch has a large ground plane. Solder a second piece of wire to this golden pad. From there, stretch about 30 mm of wire towards the upper corner of the logic board, and solder the end of it to the round golden pad where a screw goes. This is a ground point.
Reassemble the phone. Your power switch should now work again.
I hope this helps.
Jose
This may seem obvious to the tech savvy but not to all.
I bought a new flex cable/board on ebay. It was supposed to be new but it is obviously used. I have my doubts that it works. I am trying to test it before installing. If I press the power button, pin 10 (as described) should be electrically connected to ground, right? This is not the case with the board I have. Is the connection between pin 10 and the switch a direct trace on the ribbon cable or is something else involved? is there a diode or anything else in this circuitry? Does the battery holder come into play?
Other information. My phone does power on with the charger/remove/replace battery trick. All other buttons work.
Related
I tried to soft reset my tytn II in the dark, and accidently put the stylus into the usb/charging slot and somehow screwed up my phone. It will not charge, or connect with my computer. Any suggestions?
OMG! I did the same thing, but luckily i didn't do further damage except the copper parts become bent
HTC should have done something about this! i am sure many other users did the same
can u take it back to your supplier for warranty claim?
same problem here...
i could bend back the copper contacts with a WOODEN (!!) toothpick (dont steer around with metal in there....)
Looks like i tried to reset the device in darkness last night and fumbled around in the usb jack.
Damn... really bad position for the reset-button!
Same issue here-- though some chargers now work, some don't. My phone will charge with my OEM charger and usb to computer, but not my 3rd party wall charger or my car charger. Aaargh
Same Problem Here
Check out this thread at AT&T Forum regarding my attempt to get a replacement phone.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=65536
I got mine replaced at the store. I was under 30 days and was lucky.
I am going to order one of these:
http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html
it should fit. i also heard that certain verizon phones have rubber usb plugs on them. I may just stop in a verizon store and see if one fits. My tmobile wing had one on it and it worked great to protect the usb port.
Well...I did the samething last night. Tried to soft reset my phone while driving in the dark. Luckily I've had my tilt less than 30 days, called and now all I have to do is go to the AT&T store for a replacement....Also, I'm going to pay 10% restocking fee so I can get an extra battery and charger...W00T!!!!! I actually saved about 50 bux
One way to avoid doing this in the dark is to flip the phone upside down, locate ExtUSB socket with your left index finger, keep your finger over the socket and slide your stylus down your finger tip. Of course the easiest way is to turn a light on.
wizzzard said:
One way to avoid doing this in the dark is to flip the phone upside down, locate ExtUSB socket with your left index finger, keep your finger over the socket and slide your stylus down your finger tip. Of course the easiest way is to turn a light on.
Click to expand...
Click to collapse
true, but for those of us with this problem already, it is too late
Luckily, I tried a newer charger, and my car charger, and they both work. As far as connecting to my computer, I have to use my Y cable that was included with my old 8525. I'm still pissed, and I have a TyTn II and not a tilt, so warranty will be a pain in the ass, considering I have to send it to the UK. If it starts to act up, I will have to send it in, and if I get it fixed, I will definitely buy one of those plugs from the above post. Thanks for all the replies, and good luck to everyone with this problem.
Lesson # one don't put things in holes in the dark in bed
Well, good news is ATT is sending me out a replacement phone for free since I am still under warranty (outside the 30 days, but inside the 1-year). Now I just need to re-flash back to OEM status so I don't get busted on the return...time to test out the "Idiot's Guide to Re-Flashing Back to Original ROM" and see if it does me right.
Heijdemann said:
Lesson # one don't put things in holes in the dark in bed
Click to expand...
Click to collapse
that's why I have so many kids!?! anyways I had my phone charging in my car and it fell of my seat onto the floor. the nezt day I noticed it wasn't charging (tytn 2 no easy warranty fix) I then noticed that inside the usb thing is a black plastic piece with the small metal connections. the black piece was bent a little on one side so I removed the battery took a pair of tweazers and bent it it straight again than I took some forced air in a can (for a computer keyboard) and blew in there to make sure none of that cheap plastic shredded and got in the way of the metal connections. it looked like after I used the tweazers some of that black plastic chipped off (very small pieces) anyways after that it worked perfectly. hopefully this will help others
well it seems i messed up now and stuck my stencil in there one of the small Metal wires is out of whack now ad some chargers work and some dont did anyone get a plug yet?
pissed
so I live in metro detroit with a tytn 2 not a tilt. after I stuck my stencil in there it seems my car charger don't work. when charging with my audio adapter its flaky losing some power, maintaining, gaining some power. but when I use my wall charger with no adapter it charges!! if you put the kaiser flat on the table I see by 2nd wire (in the hole) is bent down(whereas the others are up) and its sitting in the middle of the whole.(my buddy told me to use a needle and a magnify glass because the 2nd wire was actually bent all the way down but I got it in the middle after messing with it. when that one wire was out of whack my car charger gave me a red constant light (no charge) after the stencil incident. I hope all that helps somebody! anyways so I call HTC first they tell me that's not covered under warranty. Then they tell me I have to send it to houston tx for 3 weeks. Then they tell me it will cost $300 usd to repair!!!! this is insane for a little miniusb piece that got hit once with a stencil. it probaly cost 22cents. what is everyone else doing? I think if I can get that metal piece to stick to the top it'll be fine. I just switched to att and I have 6 days until im locked to a 1yr contract I could buy a tilt for 250 or whatever but id have to sign a 2yr contract.
I stuck the stylus in the USB port as well but luckily I didnt seem to do any damage. I did bend it a bit but with some gentle pressure in the opposite direction it went back into place. I havent had any problems charging or syncing since then, so it seems I got lucky. Just gotta hope I dont do it again, lol.
ya the black piece as a whole seems to be able to bend a little but if u mess the little little metal connections in there you're gonna have problems
Hi, this is my first post and I hope to help someone. I had the same problem with my phone, it charged with the home charger and in the cradle but the car charger won't work. using a close light and a magnifier I could notice that with the phone with the screen upside looking at the usb connector that the pin al the way to the right was flat and a tip was showing as opposite to the others. I returned it to the former position and voila!! it works. I hope to help someone.
>>>>>><<<<<< PDF With All Steps And Images Added For Your Viewing/Downloading Pleasure >>>>>><<<<<<
***If this does not belong here I appologize, and feel free to move this if necessary. I just figured the development community is most likely to take this "upgrade" on***
After seeing that someone used Palm's wireless charger on their non-palm phone; I decided to put one on my Droid Incredible.
***This was done to a completely stock Dinc. I did not use any special back, and the stock back gets to stay on (unlike in the other video that I saw)
Wireless Charging the Droid Incredible
**Disclaimer: This will void your warranty, and if you solder something wrong will probably break your phone. With that said I can in no way be held accountable for anything that occurs while performing this “upgrade” to your phone.
>>>>If anyone knows where I can buy that little void sticker that you will see in a picture below, please let me know! If we can get that sticker then our warranty is not voided by doing this.
Supplies:
1.Palm touchstone charger http://www.shopping.hp.com/product/handheld/categories/palm/4/accessories/FB300AA%23AC3
2.Palm touchstone phone back http://www.shopping.hp.com/store/product/product_detail/FB306AA%23AC3?
3.Micro USB cable
4.Soldering Iron (the finer the tip on this the better)
5.Torx T6 screw driver
6.Safe pry tool (or a small flat head screwdriver)
7.Very tiny insulated wires (I just pulled mine out of a USB cable that I cut up)
8.Electrical Tape
9.[Optional] Multimeter to test that you actually made a good connection
How To (Images are of a higher quality (12mp) so I had to stick them in zip files to get them on here):
1.The palm touchstone phone back has a sticker inside of it that encases the wireless charging receiver, so you need to peel this off. Once it is peeled off it will look like this (without the wires soldered onto it):
(Images can be seen in: Palm Receiver.7z)
2.Remove the battery cover and the battery then unscrew the back from your phone (please view a tare down video for details, there are plenty of them on you tube that I used for a reference.)
1.All you need is a torx t6 screwdriver and a safe pry tool, I used a small flat head screwdriver and it worked just fine. Unscrew the 4 screws around the sides and then carefully pry off every place that the battery cover clips on, as they also hold on the red back.
(Images can be seen in: Dinc Inside.7z)
3.Solder on some wires to the USB connector as shown in the below image without soldering onto the pins next to them. This is difficult and takes some time and patience, since these connectors are very small and close (note the polarity in the image, notated in red).
A.Also it is necessary to place a piece of electrical tape over the components right next to the connector (Green box in the image) as they will short out the power and make it impossible to charge your phone if you do not (I found that out the hard way and went back and fixed it).
B.One final note here is that I had to melt down the red phone backing inside to allow the cables to get past the case. See the green rectangle in the image above for where I had to do that. I just used my soldering iron and melted it down, it makes a pretty nice indention for the wires to fit through.
(Images can be seen in: Dinc USB.7z)
4.Now push out the rubber plug in the red phone backing next to the USB cover (this is encircled in Green in the image from step 2).
A.Run the cables that you just solder on through that so that they are sticking through to the battery compartment on your phone.
B.You can also stick on the palm receiver to the inside of your phone cover (note the direction and placement, as this is necessary to close your cover).
3.Note that I placed electrical tape over the wires. This was necessary to keep them from breaking off of the USB connector since the solder points are so small.
(Images can be seen in: Almost Done.7z)
5.Solder on the wires to the palm charger receiver and you are done. Now you just need to carefully place the wires towards the middle of the phone so that you can close the back of your phone entirely (this is another reason why the wires need to be small).
A.Note the polarity of the connection.
B.Also I put a piece of electrical tape over the connections on the palm charger receiver to protect them (not shown in the image).
(Images can be seen in: Wireless Charger.7z)
Here is a video of the end product and how it works:
http://www.youtube.com/watch?v=YOMVJ-vmWpg
Also I just verified that my compass is working without any problems.
This could be truly amazing. I can't wait to see more.
ThugEsquire said:
This could be truly amazing. I can't wait to see more.
Click to expand...
Click to collapse
Its been done with the Evo, but don't know anyone who did it with the Inc.
http://www.goodandevo.net/2010/06/h...rk-with-palm-touchstone-wireless-charger.html
Sounds really nice. Not gonna try it with mine because I'm too scared
Though shouldn't this be in accessories or general?
What are you doing to align the coils? My biggest concern that's kept me from this is the magnets also would mess up the compass sensors readings which I for one actually value.
Wow, you managed to bring me out of my months of silence in posting...
I feel honored that I can get you out of your months of silence
The coil alignment is handled by the magnets inside of the palm touchstone charger itself (the base unit that plugs into the wall). The metal objects that you can see in the "Palm Receiver.7z" file are actually not magnets, but small circular pieces of metal that get pulled towards the charger base when you get them close to each other. So when you have the phone off of the charger, there are no magnets to mess with anything
Also you will notice that there is a piece of metal behind the coil, and that seems to block the inductive signal all together (because I tried to put it on backwards to no avail). Therefore your phone is mostly protected from the inductive transmission.
The only thing that I noticed, is that the touchscreen on the phone is a little weird when it is on the charger, but I see the same side effects when plugging the phone into a "non-htc" charger (before performing this "upgrade"). **I also saw this on my Moto Droid when connecting it to a 1 amp charger, and I have seen this with multiple other touchscreen devices so I think it just has something to do with the frequency of the charger.
Also in case of any concerns: MY PHONE HAS IN NO WAY BEEN DAMAGED BY THIS "UPGRADE"
pianoplayer said:
Sounds really nice. Not gonna try it with mine because I'm too scared
Though shouldn't this be in accessories or general?
Click to expand...
Click to collapse
Yah, it probably should be, and may get moved (which is perfectly fine by me). I put it in here because I am a developer and much more likely to do this, so I figured the development community would be more interested.
ThugEsquire said:
This could be truly amazing. I can't wait to see more.
Click to expand...
Click to collapse
You mentioned that you can't wait to see more....?
What more would you like to see? I am happy to add to the posts, but just not sure what further details you would like to see.
nevetsvsx said:
Also in case of any concerns: MY PHONE HAS IN NO WAY BEEN DAMAGED BY THIS "UPGRADE"
Click to expand...
Click to collapse
I trust your method, I just don't trust my shaky hands
BTW there is a multi quote button so you dont have to do a separate post for each reply
I have a rubber case on my Dinc... would I need to remove it for charging?
___________________________________
Yup.... The ones yoe momma told ya about.... Bad Seed Customs!!
I think you will be ok if it is one of those thin (about 1mm thick) rubber cases. Anything thicker than that and you would probably have to install the wireless receiver on the case itself and remove your battery cover all together.
I tested a thin rubber case that I have (no more than 1mm thick I think) that fits a Droid Eris and it charges as long as its flush to the back of my phone.
Sent from my ADR6300 using XDA App
Wow, this is amazing, very well done. I think this is the first hard mod I've heard of for an Android. I guess gold cards were a sorta gray area.
I've had my Incredible modded to work with a Touchstone since around June of last year. It works great, but I must caution anyone thinking of doing this to be VERY careful. Experience with soldering and a steady hand is a must. One could fairly easily mess up their phone attempting to do this.
Could you do this with a powermat if you wanted to? I have a few laying around I could use.
Sent from my ADR6300 using XDA App
Paul600k5 said:
Could you do this with a powermat if you wanted to? I have a few laying around I could use.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Sure, if you wanna take apart one of those generic receivers and try to fit it inside your phone!
nevetsvsx said:
You mentioned that you can't wait to see more....?
What more would you like to see? I am happy to add to the posts, but just not sure what further details you would like to see.
Click to expand...
Click to collapse
What I originally meant was pictures. But now that you've added them and I've seen the glory, this mod is really quite impressive and I'm thrilled you shared it with us. But now that I think about it, could this also do USB wirelessly? That would be pretty amazing.
ThugEsquire said:
What I originally meant was pictures. But now that you've added them and I've seen the glory, this mod is really quite impressive and I'm thrilled you shared it with us. But now that I think about it, could this also do USB wirelessly? That would be pretty amazing.
Click to expand...
Click to collapse
No, the transmission of data wirelessly is achieved through modulated EM waves. This is simple inductance: a changing electric field creates a magnetic field, a changing magnetic field generates an electric field, so a current carrying loop placed near another loop of wire will induce current in the other loop. The receiver in the phone is engineered to "create" the "proper" amount current to charge your battery when combined with the base. In theory yes, but not with this equipment.
How does the phone treat a USB cable being plugged in - will it charge ok, and have your data transfer rates been adversely effected? I wouldn't think so, since you're only touching the power...
Mr. Spontaneous said:
How does the phone treat a USB cable being plugged in - will it charge ok, and have your data transfer rates been adversely effected? I wouldn't think so, since you're only touching the power...
Click to expand...
Click to collapse
I have used the USB charger and data transfer cables without any problems at all. Also I have copied some files off of my phone to my PC since the "upgrade" and did not notice any extended times or anything that would remotely make me think something was wrong.
I did not run a speed test before and after to see if anything slowed down, but as you said we are only touching the power pins, so I highly doubt anything has changed.
Hey guys,
Does anyone have broken G1. My antenna cable is broken. I cant find this cable anywhere. This is the longer one. I will cover postage cost. I am from Poland. Please PM me. Thanks.
I really wish I could send you one.
But my parents would kill me.
You can wait 3 years when ill be 18 and able to make my own desicions
i have lots, but first may i ask how you broke it? were you trying to take it apart? or is it the board that is broken not the antenna?
or are you just talking about the wire? shorter wire for antenna board and longer wire going to the gps board
He's looking for the longer wire going to the board apparantly
The gps and antenna is easy to mix up....but I'm sure he got the "longer" part right
My longer wire is broken. I managed to put a screw through this wire.
http://www.ebay.com/itm/Htc-g1-/110809841104?pt=LH_DefaultDomain_0&hash=item19ccc7fdd0
here is a link for some parts on ebay, id recommend looking for something local. if you really cant find anything i guess i could send you the cable in an envelope.
shouldnt cost too much but i'd still require you paid for it
Any one know of a company that can fix the USB port on a HTC Raider in Canada. Rogers wants to charge me $250 to fix it.
KillerbawX said:
Any one know of a company that can fix the USB port on a HTC Raider in Canada. Rogers wants to charge me $250 to fix it.
Click to expand...
Click to collapse
You could probably buy two new Raiders for $250! Replacement might be the best bet, as you can likely find one on Kijiji for $100 or so. If you have a local cell repair joint, give them a call, and see if they offer the replacement. It might be tricky since the USB on the Raider (as other HTC phones) is actually a special type of HDMI jack that also has USB (known as MHL).
If you're adventurous, you might track down a broken Raider and attempt a part swap yourself. I've not seen the inside of the unit, so I can't say how easy or hard that would be at any skill level...
Hope you get it fixed up!
The part is on eBay you can always try to do it yourself should be a few small solder points
Sent from my HTC PH39100 using xda premium
KillerbawX said:
Any one know of a company that can fix the USB port on a HTC Raider in Canada. Rogers wants to charge me $250 to fix it.
Click to expand...
Click to collapse
A friend needed this. We ordered one off ebay ( http://www.ebay.com/itm/OEM-USB-Pow...328529?pt=PDA_Accessories&hash=item27c422a1d1 ) and although it required opening the phone up and voiding the warranty, it required no soldering. He doesn't open electronics up very often, and said it wasn't very hard to do.
i was babbling abt this in a thread in the dev forum, thot i'd best do it also here in the proper forum for it:
i changed the USB port in my Raider, was very simple. Six little screws, two different lengths so keep track of them. One screw also holds down the teeny cover under which is where the tiny connector resides that connects the port to the fone circuit board. Once the fone is back together that's where you make the final connection between port and fone.
Slip off the battery cover, undo the six screws, take off that tiny little cover. Carefully work off the entire back housing. There's no front housing, just the screen glass and the fone circuitry bundled together.
Micro-USB port and ribbon connector is fastened to the housing with two more of those little screws. Change out the port with the new one. New part may not be an exact duplicate of the old part: that's ok. Reassemble the fone. Under that hole left by the tiny cover, press home the miniscule plug that connects up the port to the fone.
Put back the tiny cover, fasten back all the screws, and you're done. Port cost me $9 USD plus shipping on ebay.
lowfatmilk said:
i was babbling abt this in a thread in the dev forum, thot i'd best do it also here in the proper forum for it:
i changed the USB port in my Raider, was very simple. Six little screws, two different lengths so keep track of them. One screw also holds down the teeny cover under which is where the tiny connector resides that connects the port to the fone circuit board. Once the fone is back together that's where you make the final connection between port and fone.
Slip off the battery cover, undo the six screws, take off that tiny little cover. Carefully work off the entire back housing. There's no front housing, just the screen glass and the fone circuitry bundled together.
Micro-USB port and ribbon connector is fastened to the housing with two more of those little screws. Change out the port with the new one. New part may not be an exact duplicate of the old part: that's ok. Reassemble the fone. Under that hole left by the tiny cover, press home the miniscule plug that connects up the port to the fone.
Put back the tiny cover, fasten back all the screws, and you're done. Port cost me $9 USD plus shipping on ebay.
Click to expand...
Click to collapse
Hey, dude, I know this thread is a little old, but can you PM me the link to where you bought your USB port? I think I need to replace my port (issues connecting to PC and charging requires wire wiggling), but I've read about certain ports not working with data transfer and only charging, and I don't want to make that kind of mistake.
projectisaac said:
Hey, dude, I know this thread is a little old, but can you PM me the link to where you bought your USB port? I think I need to replace my port (issues connecting to PC and charging requires wire wiggling), but I've read about certain ports not working with data transfer and only charging, and I don't want to make that kind of mistake.
Click to expand...
Click to collapse
Try this? Says OEM so I imagine you wont lose functionality.
http://www.globaldirectparts.com/product-p/htc747235-qs.htm
Thank you! And only $8 too
Sent from my Vivid 4G using xda app-developers app
Hello, my galaxy note has been having some issues, a couple of days ago it would charge with the charger bent down but I decided to play around with the port with a toothpick to look for dust and bend the metal bit in the middle. Now it barely charges at all, I believe the charger bit is fairly cheap but I am not sure if it is very hard to do. I am wondering if I am best off buying a new phone or paying someone to fix it for me? Or just having a go at putting the new piece in myself? I have tried using another charger and the same charger charges other phones.
-Any Help Greatly Appreciated
jeffreymonk said:
Hello, my galaxy note has been having some issues, a couple of days ago it would charge with the charger bent down but I decided to play around with the port with a toothpick to look for dust and bend the metal bit in the middle. Now it barely charges at all, I believe the charger bit is fairly cheap but I am not sure if it is very hard to do. I am wondering if I am best off buying a new phone or paying someone to fix it for me? Or just having a go at putting the new piece in myself? I have tried using another charger and the same charger charges other phones.
-Any Help Greatly Appreciated
Click to expand...
Click to collapse
If you are ok using a screwdriver (jewelers type), you won't have any issues. There are countless youtube video's that show the removal procedure on that usb port. Granted, I've been doing electronics for over 40 years, but it's about a 10 minute procedure. One thing I do, with these super tiny screws, is I keep a small magnet handy that is attached to the bottom of a small metal bowl. When I take out a screw, it goes in the bowl, and with the magnetism, it won't get lost that way.
When you replace the USB port, get one that matches the one you remove. Depending on the country you live in, there could be a few different types. They all, will charge your phone, but, if you get the wrong match, the cellular signal you end up with, could be 1/2 of what it should be, so if you are in a low signal area with the one you have now, with the wrong usb board, you could end up with no signal.
p51d007 said:
If you are ok using a screwdriver (jewelers type), you won't have any issues. There are countless youtube video's that show the removal procedure on that usb port. Granted, I've been doing electronics for over 40 years, but it's about a 10 minute procedure. One thing I do, with these super tiny screws, is I keep a small magnet handy that is attached to the bottom of a small metal bowl. When I take out a screw, it goes in the bowl, and with the magnetism, it won't get lost that way.
When you replace the USB port, get one that matches the one you remove. Depending on the country you live in, there could be a few different types. They all, will charge your phone, but, if you get the wrong match, the cellular signal you end up with, could be 1/2 of what it should be, so if you are in a low signal area with the one you have now, with the wrong usb board, you could end up with no signal.
Click to expand...
Click to collapse
Thankyou I will have a go at removing it I am a bit unsure of which one to buy so I will have a look around once I take it out, They are fairly cheap aren't they?
jeffreymonk said:
Thankyou I will have a go at removing it I am a bit unsure of which one to buy so I will have a look around once I take it out, They are fairly cheap aren't they?
Click to expand...
Click to collapse
Yeah, less than $10(USD). Last one I got was like 8.95 or something.