Help, Galaxt TAB firmware upgrade Horror - Galaxy Tab Q&A, Help & Troubleshooting

Greatings good people of XDA forums,
Recently tried to upgrade to a new firmware as the old one seems to have issues.
Any way after using Odin 1.7 to flash to new firmware, the Tab would reboot into recovery utility but would not do anything, if I tried to wipe out data/ Factory reset from the recovery menu it will do nothing at all !!!
Please help.

hmj2k3 said:
Greatings good people of XDA forums,
Recently tried to upgrade to a new firmware as the old one seems to have issues.
Any way after using Odin 1.7 to flash to new firmware, the Tab would reboot into recovery utility but would not do anything, if I tried to wipe out data/ Factory reset from the recovery menu it will do nothing at all !!!
Please help.
Click to expand...
Click to collapse
what rom did you flash? what did you do specifically using odin? provide more details so that people with solutions can help you.

kay_kiat88 said:
what rom did you flash? what did you do specifically using odin? provide more details so that people with solutions can help you.
Click to expand...
Click to collapse
I used:
Odin 1.7
Firmware P1000JPJM4
PIT P1
I also tried firmware JM3 with the same problem and JVJJ1, JJ2 fail to flash.

hmj2k3 said:
I used:
Odin 1.7
Firmware P1000JPJM4
PIT P1
I also tried firmware JM3 with the same problem and JVJJ1, JJ2 fail to flash.
Click to expand...
Click to collapse
did you check the partition option? is the firmware a .tar file?

Yes it is a .tar file and I tried both check and uncheck repartition.

Can you start your tab or is it stuck on the phone and pc picture?
Two things possible: protected bootloader, or corrupt file being flashed.
Go to Roto JME rom in the development forum and follow all those steps, using all those files to fix your tab.
Don't worry too much - what you are experiencing happens to many people - it happened five times to me yesterday while I was trying new things.

All the middle eastren firmwares seem not to work on my TAB, I flashed it with the latest european firmware and now it works.

There is a middle east rom floating around. I thought it was equal to JMI.

Related

which froyo rom for my Austrailan Optus SGS

I have I9000DTJG4, some forums said there is froyo upgrade via kies, but my one still doesn't have. Tried to upgrade more than 4 different ROMs which I downloaded from samfirmware.com, but none of them is working. I have tried I9000XWJPA, I9000DTJP5, I9000DXJPA, I9000ZSJP3, I9000XFJP7, I9000XWJM8. Most of them get "Pass" in ODIN, but couldn't pass boot screen. Not sure why.
Found one customer ROM from www.Hiapk.com which is based on I9000XWJP6. It's working, but some of the feature I don't like. For example, there is no vibration on-off under messaging setting, only has on-off for the whole handset. I even tried stock I9000XWJP6, but still same result as other stock ROMs.
Could someone help me? Which froyo can i flash to my I9000DTJG4?
Look at DocRom in the development section.. If u want official froyo then, DTJP5 is the official one from kies
Sent from my GT-I9000 using XDA App
elhpianist said:
Look at DocRom in the development section.. If u want official froyo then, DTJP5 is the official one from kies
Click to expand...
Click to collapse
BTW ... which Doc's ROM BUJP8, JPA or JPO ?
I9000DTJP5 is the one you need. I did the following First flashed I9000XWJM8 with RE-Partition and 512.pit. Than I9000DTJP5 without RE-Partion no pit. I did a factory reset before and after flashing.
tragusman said:
I9000DTJP5 is the one you need. I did the following First flashed I9000XWJM8 with RE-Partition and 512.pit. Than I9000DTJP5 without RE-Partion no pit. I did a factory reset before and after flashing.
Click to expand...
Click to collapse
Thank you very much for these info. I did tried to flash to I9000XWJM8, but it won't pass the boot screen after flash rebooting. It comes up the animation with the sound, then it just stays there.
Also I have tried to flash DTJP5 directly, the result was same as flashing I9000XWJM8.
Not sure what's the problem.
tragusman said:
I9000DTJP5 is the one you need. I did the following First flashed I9000XWJM8 with RE-Partition and 512.pit. Than I9000DTJP5 without RE-Partion no pit. I did a factory reset before and after flashing.
Click to expand...
Click to collapse
Thanks alot, it's working as following your steps.

Soft bricked N7000. How to?

Tried everything I could with Odin and phone still stuck in a start loop.
I was downgrading from checkROM to official firmware ZSLA2 with CWM (I wanted to keep ROOT, so I selected "Keep CF-Root kernel") due to stability issues, after restarting the phone got into the start loop.
I flashed with Odin official ZSLA2 with the same result (looped start). I flashed XXKKA (again looped start). During the flashing process, Odin says the flashing was successful. By the way, both ROMS are tar.md5 files.
I tried to remove the battery for over 30 minutes and charge it for 2 hours, tried re-partition in Odin (it's my understanding that with a stock rom, it creates a clean installation), but Odin fails to start the process.
What else can I do?
I am sorry if this has previously asked, but I've been searching for over 2 hours and nothing similar came. Somebody mentioned to use a PIT file in addition, but the other person who got his phone soft bricked didn't solve the problem either. As downloading a ROM is time consuming and I've got many problems with upload sites in china (cannot access to most of them), I would thank any help in regards this issue.
Sounds like your kernel isn't talking properly to your ROM.
A fresh start is your best bet. Flash a stock rom and kernel from Odin and reroot it with CF-Root.
What files are you putting into Odin? There should be a total of 4.
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
I am using official ROM N7000ZSLA2_N7000ZSLA2_N7000XLA4_HOME.tar.md5 into PDA and also tried ROM N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5, which I used successfully in the past to make root into my phone.
Does it really make a difference to flash 4 separate files instead of a full pack? Where can I find an official ROM with pda radio and kernel separated? Just untar the ROM?
btyork said:
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
Click to expand...
Click to collapse
Oh, they do come into the Note; I flashed the Beta ICS, and one of the things they mention is to use the PIT file for the 16GB version, instead of the 32GB that comes with the leaked ROM. Unfortunately I deleted that ROM, and donwloading it is painfully slow and also wouldn't necessarily solve my problem as I couldn't even make a phone call.
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
btyork said:
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Click to expand...
Click to collapse
This are the files I am flashing:
Sorry, I am new user and still cannot post screen captures. I do have more than the 5 files.
In XXKKA I have:
Boot
Cache
Factoryfs
Hidden
Modem
param.lfs
Sbl
zImage
In ZSLA2:
Cache
Factoryfs
Hidden
Modem
zImage
btyork said:
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
Click to expand...
Click to collapse
I can only enter into Download mode, not recovery mode.
Odin is full wipe, right? What the hell am I doing wrong?
N7000xxla1_n7000oxala1_oxa
http://hotfile.com/dl/141060546/b0c7420/N7000XXLA1_N7000OXALA1_OXA.rar.html
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
choihan06 said:
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
Click to expand...
Click to collapse
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
mrfan said:
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
Click to expand...
Click to collapse
I have just recently dowloaded and installed the rom without problem. What do you mean by corrupted rom?
Sent from my GT-N7000 using xda premium
I too bricked my phone but after reading this guide (ABD wouldn't recognise my device so I couldn't follow it) I understood the partitions had become messed up.
I read somewhere about the PIT files.
I ODINed the ABYSS Kernal and PIT (Q1_20110914_16GB-patched) for my 16gb n7000 ticked the repartition box. It booted into CWM recovery and I used the restore and bingo.
Fix The problem
I had the same problem, the device got into start loop. JUST DO A FULL WIPE..! and the device should start normally. I worked for me.... :good:
Sent from my GT-N7000 using xda premium[/QUOTE]

[Q] Flash from a MDT ROM to a Non MDT rom bootloop

Is there anything i can do? I've tried flashing the stock firmware via odin and it flashes fine, but hangs at the samsung logo, wipe of cache and factory reset dosen't help a bit. Im' able to flash the aopk rom without the bootloop. How is that possible?
When you flash stock, did you choose the pit file and repartition?
Sent from my GT-P1000 using XDA
Jakk212 said:
Is there anything i can do? I've tried flashing the stock firmware via odin and it flashes fine, but hangs at the samsung logo, wipe of cache and factory reset dosen't help a bit. Im' able to flash the aopk rom without the bootloop. How is that possible?
Click to expand...
Click to collapse
Newest AOKP is MTD now, hence the no bootloop. Odin the stock with the repartition and the pit file and youll be good.
its mtd, not mdt
please use the latest version of odin and the correct pit file
you will return to ext in no time
gogol1996 said:
its mtd, not mdt
please use the latest version of odin and the correct pit file
you will return to ext in no time
Click to expand...
Click to collapse
He resolved this 2 days ago.
http://forum.xda-developers.com/showthread.php?t=1626701&page=2
His posts are allover places DEV, Q&A and General Sections. So yeap, I almost replied him for the third time too.

[SOLVED] [Q] Galaxy Note won't flash original firmware

Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
BIGGEST EDIT:
All of the methods in this thread are NOT WORKING. Still stops at factoryfs and CWM says "Installation Aborted". SO, WHAT I CAN DO? He is desperated, I'm desperated. PLEASE ANSWER FAST !!
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
Click to expand...
Click to collapse
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
msedek said:
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
Click to expand...
Click to collapse
He is able to enter into DL mode. Even PIT doesn't work.
Mr.Indigo said:
He is able to enter into DL mode. Even PIT doesn't work.
Click to expand...
Click to collapse
Well then your only option its the warranty or pay samsung either for a new phone or a mother board replacement...
That pit file method its only a partial solution to help you get your device partially working maybe a couple of months.. When the emmc bug happens it does damage the Emmc chip so the hardware its fried and there's no software that can repair it..
The pit method could work for someone but not for others.. Depends on the damage
Tapatalking on my n7000
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried it, but didn't work. This solution is too much dangerous?
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
It's doesn't matter if it's 1 or 3 files.. The pit file just repartition the emmc in order to reacomodate the memory and so you can flash the rom.. Flashing separately phone csc and PDA won't make any difference..
Tapatalking on my n7000
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
Click to expand...
Click to collapse
I have the same problem!!!
I'm desperated, since it's my main phone!
I will try the last solutions!!!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
That's what I need.... I didn't found the 3 files. I will try!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Aldenucci said:
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Click to expand...
Click to collapse
IDK, you must do it at your own risk.
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Mr.Indigo said:
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Click to expand...
Click to collapse
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
msedek said:
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
Click to expand...
Click to collapse
He didn't have warranty. I'm trying to flash any PIT which owns factoryfs. He said that fails to wipe into some minutes and I have 88 factoryfs PITs. So I have to flash ALL of them to know. BTW I can flash a kernel using ODIN!
mistajoe83 said:
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
Click to expand...
Click to collapse
My problem is SOLVED!
I found 88 PITs, whick it was intended for factoryfs. I tried the first ten PITs, and the 7th WORKED!
It was 17xx MB. Now the phone is working! THANKS FOR ALL OF YOUR GUYS HELP!

[Q] bricked N7000. how to get working again

I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
sejtam said:
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
Click to expand...
Click to collapse
1st things 1st. Why would u use heimdall or odin? And what is your current ROM before trying to flash CM 10.3, was it stock? You should have looked for CWM recovery or Philz safe kernels as base when doing ROM flashing ESPECIALLY custom roms. From what you said, then can you still boot into download mode? I have no knowledge of heimdall so just download Stock Firmware, flash it with odin and see if you can boot your N7000 first.
The worst case scenarios is you are experiencing emmc bug-brick. go to the thread and read carefully to deduce your type of 'brick' and find solutions there. Good Luck.
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
sejtam said:
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
Click to expand...
Click to collapse
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
same problem
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
i have the same problem
conanbrapp said:
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
Click to expand...
Click to collapse
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
fixed miine
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Jackwu696 said:
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
conanbrapp said:
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
Click to expand...
Click to collapse
If you're able to boot up properly n prompted to wipe, then do it. But do it in recovery not on device.
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
sejtam said:
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
Click to expand...
Click to collapse
Before that, do u have KIES installed? KIES is NOT compatible with odin and will cause potential trouble. So is some firewall and antivirus apps. You need to disable all of them before using odin. Please search the thread http://www.sammobile.com/firmwares/ for stock rom site.
Sent from my GT-N7000 using XDA Free mobile app
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
sejtam said:
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
Click to expand...
Click to collapse
Of course you fail... When using ODIN, U should have downloaded the .tar. if you downloaded a zip. then unzip it first to get the tar file, then you flash it with odin. All requests are included in the stock.tar And PLEASE DO NOT Play with PIT files if you don't know what you are doing.
So now what you need to do is. :
1. DISABLE KIES (Uninstall it better), Your firewall, antivirus.
2. Install CORRECT Samsung USB driver. (Search keyword "download samsung N7000 usb drivers")
3. Unzip your zip file and extract the tar.file.
4. Run ODIN as Administrator (Right click/run as)
5. Go to download mode. connect your device to Pc/laptop.
6. Wait until Odin detects your device, click AP/PDA and choose the tar file you extracted.
7. DO NOT tick partition.
8. Let it run
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
sejtam said:
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
Click to expand...
Click to collapse
Try updating your odin. Use the newest vers. And try and read this https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNGd2e3iG5hkDeo0KyAjGuCSfQSLUw . If All fails then it's a confirmed SUPER-BRICK and there's nothing except samsung service centre can help you now... Sorry for not being able to help more..
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
sejtam said:
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
Click to expand...
Click to collapse
His link to ROMS were basically the same ones you can download at sammobile.

Categories

Resources