[Q] Ultibread! V1.3 - How to ????? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi
i read carefully the procedure for flashing the Ultibread! V1.3 based on 2.3.x but as a noob on flashing i did not fully understand. can anybody help me at the remarks as per the original description
I RECCOMEND INSTALLING FROM GINGER XWJV1:
do i have to flash that before updating via odin - this is a 2.2 ed.?
Get into download mode
flash a FROYO yes FROYO Speedmod kernel (make sure auto reboot is OFF)
where to get that and which version - pleas a link for dummies like me
Then pull battery and enter recovery mode
when to pull battery and how to enter recover< mode without battery ???
Then in CWK choose Ultibread-V1.3 and apply.
means most likely start in recovery mode and install from sd ???
Reboot
thanks a lot for helping a noob
br
norbert

I'll break it down for you .
1.Download the XWJV1 (it's the official 2.3.2) Firmware from samfirmware.com. Also download Ultibread and put it on your (internal) sd card
2.Flash it using Odin
3.Get into download mode by turning your phone off and then holding the volume up button + home button + power button
4.Download the SpeedMod K13C kernel from here
5.Flash the kernel using Odin (select the tar package under pda, make sure you don't repartition and turn auto reboot off)
6.After flashing remove your battery for 5 seconds and then put it back in. Turn your phone of while holding volume down + home + power. It will now go into recovery mode
7.Now select install update from zip. Select the Ultibread zip and your good to go!
Good luck!

Thanks for the breakdown - now i understand it too and i am almost done

as currently the speedmod kernel is moreless noch acassible for download - if it is just for rooting, may i also use cf-root instead?

bearno1 said:
as currently the speedmod kernel is moreless noch acassible for download - if it is just for rooting, may i also use cf-root instead?
Click to expand...
Click to collapse
you use speedmod to flash rom via cwm

I installed it over my doc rom.. And it worked correctly....
Some applications errored out... but after uninstalling them and reinstalling them everything is working correctly =) (at least it seems that way so far)
You should propably do a wipe and then install so you dont have problems with your apps =P
So yeah... you can probably skip all those nonsense instructions xD

Just do regular procedure because some users have experienced problems like:force closes, fuzzy screen and even soft bricking the device
renatofontes said:
I installed it over my doc rom.. And it worked correctly....
Some applications errored out... but after uninstalling them and reinstalling them everything is working correctly =) (at least it seems that way so far)
You should propably do a wipe and then install so you dont have problems with your apps =P
So yeah... you can probably skip all those nonsense instructions xD
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App

Read the tuto on original post ...

FuzionNL said:
I'll break it down for you .
1.Download the XWJV1 (it's the official 2.3.2) Firmware from samfirmware.com. Also download Ultibread and put it on your (internal) sd card
2.Flash it using Odin
3.Get into download mode by turning your phone off and then holding the volume up button + home button + power button
4.Download the SpeedMod K13C kernel from here
5.Flash the kernel using Odin (select the tar package under pda, make sure you don't repartition and turn auto reboot off)
6.After flashing remove your battery for 5 seconds and then put it back in. Turn your phone of while holding volume down + home + power. It will now go into recovery mode
7.Now select install update from zip. Select the Ultibread zip and your good to go!
Good luck!
Click to expand...
Click to collapse
help....
my phone stuck at start up screen??
XWJV1 firmware has to put in sd card?

porsche529 said:
help....
my phone stuck at start up screen??
XWJV1 firmware has to put in sd card?
Click to expand...
Click to collapse
OMFG...
You must flash XWJV1 by Odin !!!

Related

[Q] How can I install a kernel? (please don't kill me)

Hi everybody!
I tried to search everywhere, but I can't find it.
Does anybody know where can I find a tutorial/guide to install a kernel (voodoo if possible) un our SGS flashed with darky's 8.1?
Every info i found is uncomplete or requires certain things I've never done before.
thanks in advance!
Flash .zip(kernel) with clockwork mod recovery like you flashed darky's rom.
Sent from my GT-I9000 using XDA App
Majes said:
Hi everybody!
I tried to search everywhere, but I can't find it.
Does anybody know where can I find a tutorial/guide to install a kernel (voodoo if possible) un our SGS flashed with darky's 8.1?
Every info i found is uncomplete or requires certain things I've never done before.
thanks in advance!
Click to expand...
Click to collapse
Every kernel developer writes installation instructions in first post. Well,
*if you have rooted phone with ClockWorksMode recovery you just download one of CWM zip files of kernel of your choice and go to recovery and install zip file from there.
*If your phone has 2e recovery do the same as above but rename your zip file to update.zip and place it in root of sd card and flash update from recovery
*if your phone has 3e recovery you need to use Odin - download odin version of kernel of your choice, unzip it to get .tar file, add this tar file to PDA field of Odin, start your phone in download mode and flash it from Odin.
You can also use "SGS kernel flasher" from the market. It is simpler (recommended). Use CWM versions of kernels or unpack zImage somewhere.
You do understand that Darky's Rom comes with a kernel (Voodoo Advanced without OC/UV I believe).
You can check it's enabled by enterring recovery mode on your phone by turning it off and then turning it back on with the combination of Vol-down + Home + Power and then the appropriate sub-menu.
If you want to install a new one, download the CWM (ClockWork Mod) version of the kernel and flash it through the same Clockwork Recovery.
three excellent responses, each one better than the other
Thank you, thank you very much !
Sorry to be picky but its vol up, home and power.
Vol down gives you download mode.
Yes, as Zeroundead said, if you already have Darky's ROM, you just reboot into recovery, and enable it.
Darky's Version 8.1 has Speedmod kernel.
Here's a video of enabling the lagfix in version 8.0.
Check from the 09:30 min point:
http://www.youtube.com/watch?v=pvqTEW0oPrE

[Q] Cyanogen Mod Question

Hey.im kinda new to android...i was using 2.3.3 gingerbr .
i was tryin to root my phone and get the cyanogen mod on it. through this link
i have a galaxy s i9000.after i flashed the zImage kernal. my phone is stuck on the start screen that shows the galaxy S logo.it stays that way . i can go to download and recovery mode though. but i really don't know what to do .. im a noob.your help will be appreciated
i can't post the link here for some reason.. just google "cyanogen mod galaxy s i9000" and youll see a link saying cyanogen wiki something.. and then you will see steps to get cyanogen.. please help
I find it easier flashing CM7 coming from froyo. What you need to do is flash JPU then flash speedmod kernel k13c (for the recovery) then go into recovery, then mounts and storage, format system, data, cache and datadata. Also wipe dalvik cache and wipe cache partition, then flash CM7. Holla if you need more help
Sent from my GT-I9000 using XDA Premium App
Thanks a lot for your reply . but as i said im a noob lol .. so step by step directions will do.. i know its a lot . .but i really need help hehe
Androidish said:
Thanks a lot for your reply . but as i said im a noob lol .. so step by step directions will do.. i know its a lot . .but i really need help hehe
Click to expand...
Click to collapse
Ok dude, download XXI9000JPU, latest nightly of CM7 and Speedmod kernel k13c before you do anything. Once you have all them (if your on a custom rom now, do a nandroid backup) if not don't worry coz you'll lose settings and apps anyways. Power off your device and put it into download mode (Vol down + home + power) then open Odin, and connect your device (a yellow box in Odin will confirm your phone has been recognized) extract JPU (if you download it from samfirmware.com the password will be samfirmware.com, exactly how its written) then in Odin in the left of the screen, check repartition, and in the .pit section, browse the JPU folder for the .pit file, in the PDA section browse the JPU file for the file with PDA in the name, the same with phone except it will be called "Modem" in the JPU file, CSC will be called CSC in the JPU file, once all files are in the correct place, and repartition is ticked, click start to begin flashing froyo. Once done, and the setup process has completed, make sure CM7 is on your internal SD card, power off your phone and put into download mode again, now with the speedmod kernel, make sure your download the Odin version from touristinparadise.com (it will be a .tar file) connect your phone to Odin again, untick repartition, and in the PDA slot, browse for the speedmod kernel, and press start, let your device boot fully, then power off and enter recovery mode (Vol up + home + power) release all buttons as soon as the Samsung logo appears. In recovery navigate to mounts and storage, format system, data, cache and datadata. Then go back and go to advanced speedmod and wipe dalvik cache, then go back and wipe cache partition. Then install zip from SD card, then choose zip, then browse for CM7 and install. Once done, go back and reboot device now your all set
Sent from my GT-I9000 using XDA Premium App
Here
http://forum.xda-developers.com/showthread.php?t=1101534
Insanity cm033/platypus neo9 redux 5
Odin is not detecting my phone when in download mode :S ... only detects when the galaxy s screen is showing.. and i cant get into the software guys .. its either the recovery or download mode only .. .
This is a drivers issue, have you made sure kies is shut 1st? If so uninstall drivers and kies then reinstall, our just install the right drivers for your computer
Insanity cm033/platypus neo9 redux 5
ok i'll do that and let you know how it went... Thanks a lot !

Stuck- ODIN white screen

heya fellas!
earlier i couldnt install any custom ROMs on my phone..now i have a bigger issue..
i used the ODIN method..it was all good till when it re-booted n now frozen at the at&t logo screen..nothing happenning..cant go to the download mode either!
help me out people!!
thank u all!
Do you have samsung captivate (at&t branded galaxy s)? You can't flash I9000 (international galaxy s) roms to captivate.
jnr21 said:
Do you have samsung captivate (at&t branded galaxy s)? You can't flash I9000 (international galaxy s) roms to captivate.
Click to expand...
Click to collapse
i know but know that i have done this..now what..it was an international S i9000
i think i might have just used ODIN for samsung Captivate..what is going on with my phone? can i get it back?
If your phone is samsung captivate, you can try to flash stock captivate rom with odin.
There is captivate forum in xda: http://forum.xda-developers.com/forumdisplay.php?f=703
jnr21 said:
If your phone is samsung captivate, you can try to flash stock captivate rom with odin.
There is captivate forum in xda: http://forum.xda-developers.com/forumdisplay.php?f=703
Click to expand...
Click to collapse
no man its not a captivate..its a galaxy s i9000...av used the wrong ODIN...how do i come out of it?
Muru11 said:
no man its not a captivate..its a galaxy s i9000...av used the wrong ODIN...how do i come out of it?
Click to expand...
Click to collapse
Oh, i'm sorry. If you can't go to download mode with "vol down + home + power" combo, i think that you need usb jig. You can make it yourself or buy it somewhere.
http://forum.xda-developers.com/showthread.php?t=819551
Don't make so many threads for same problem.
jnr21 said:
Oh, i'm sorry. If you can't go to download mode with "vol down + home + power" combo, i think that you need usb jig. You can make it yourself or buy it somewhere.
http://forum.xda-developers.com/showthread.php?t=819551
Don't make so many threads for same problem.
Click to expand...
Click to collapse
thanx man!! let me get to work then!
once i do this..post me a link to a ROM and ODIN for this phone..
Muru11 said:
thanx man!! let me get to work then!
once i do this..post me a link to a ROM and ODIN for this phone..
Click to expand...
Click to collapse
ODIN (choose GT-I9000): http://www.sammobile.com/firmware/?page=5&t=1&o=1
Stock rom (choose I9000XWJVZ): http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=1#regiona
This stock rom come without root, so if you want it, you can flash some custom kernel e.g semaphore. Flash stock rom first and then flash custom kernel also with odin (kernel goes to bootloader box in odin).
Semaphore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
edit: You need to register to sammobile if you want to download.
ok..thanx for that..but can i go for a custom ROM rather than a stock one? plz gime the ODIN for that aswell..really appreciate ur help!!
Muru11 said:
ok..thanx for that..but can i go for a custom ROM rather than a stock one? plz gime the ODIN for that aswell..really appreciate ur help!!
Click to expand...
Click to collapse
Yes you can flash custom rom, but first flash stock rom. Most custom roms are cwm flashable, so you don't need odin to flash those.
- Flash stock rom with odin.
- Flash semaphore kernel with odin.
- Download some JVZ based custom rom from here.
- Put custom rom (whole zip, don't extract) to internal sdcard.
- Go to recovery (shut down phone, then press and hold vol up + home + power). When recovery menu appear, press vol up/vol down to move and power to confirm.
- Wipe data/factory reset, wipe cache partition, then go to advanced menu and wipe dalvik cache.
- When all wiped go back main menu of recovery and choose "install zip from sdcard" then "choose zip from sdcard".
- Find custom rom's zip file and flash it.
- Reboot your phone.
- Enjoy
ur the best man!!! am just waiting to fix the brick n then i do as above!!
i went into this state as of i cudnt get into recover, wen i did thru CWM i couldnt open the update.zip..it was strange..lets c!!
thanx a million!
jnr21 said:
Yes you can flash custom rom, but first flash stock rom. Most custom roms are cwm flashable, so you don't need odin to flash those.
- Flash stock rom with odin.
- Flash semaphore kernel with odin.
- Download some JVZ based custom rom from here.
- Put custom rom (whole zip, don't extract) to internal sdcard.
- Go to recovery (shut down phone, then press and hold vol up + home + power). When recovery menu appear, press vol up/vol down to move and power to confirm.
- Wipe data/factory reset, wipe cache partition, then go to advanced menu and wipe dalvik cache.
- When all wiped go back main menu of recovery and choose "install zip from sdcard" then "choose zip from sdcard".
- Find custom rom's zip file and flash it.
- Reboot your phone.
- Enjoy
Click to expand...
Click to collapse
done!!!!!!! hi 5 to u dude!!! am on darky ROM..i want to go to ICS..cm9...

how to install recovery ?

hello
i bought yesterday samsung glaxy s 9000
i want to install recovery to install roms in it
can you tell me what to do
or give me a guide and what is the best recovery to install i it ?
thanks
You need first to check that you can get into download mode by pressing volume down + home + power button.
then just flash as base kernel with odin or heimdall.
wooptarik said:
You need first to check that you can get into download mode by pressing volume down + home + power button.
then just flash as base kernel with odin or heimdall.
Click to expand...
Click to collapse
yes i can get into download mode
give me the best recoverry and tell me how to use odin ?
go on google and write: 'install firmware update on galaxy s i9000' - first link
you can update any firmware by this tutorial. other, newer firmwares are available on sammobile.com, have a look
after you flash base rom, you just need to a flash a new kernel with odin. i suggest you to use CF or Semaphore kernel.
recovery is already intergrated in thoose two kernels.

Root,Unroot,CWM,and how to Flash Galaxy Ace S5830i

This guide is for s5830i ONLY!!DON'T USE FOR s5830!!It can damage your phone!!
DO NOT TRY FLASHING SOFTWARE FOR OTHER DEVICE!IT WILL BRICK YOUR PHONE!!!READ CAREFULL ALL THE POSTS!!
How to root Galaxy Ace s5830i.
1.Put update.zip in your main directory in the SD card.
2.Turn off your phone.
3.Boot in Recovery by pressingOWER+VOLUME UP+HOME buttons.
4.In Recovery select Install zip from sd
5.Choose update.zip
6.Reboot your phone and it's ready.There must be a Superuser icon in your Apps menu.
How to unroot
1.Exactly the same just put the file unroot in your main directory and folow the steps.
ClockWorkRecovery
1.Put the file ClockWorkRec5830i.zip in your main directory in SD again.
2.Turn off phone.
3.Boot in Recovery and select apply update.zip
4.Select ClockWorkRec5830i.
5.You have CWR but don't delete ClockWorkRec5830i.zip from the SD because
every time you want to use it you must install it from the SD!!
Flashing s5830i with Odin v1.85
1.Turn off the phone and put it in Download mode by pressing Power+Volume Up+volume down.
2.Open Odin v1.84.Run as Administrator!.
3.Put the files in Odin and don't touch the settings
4.If it's a one-file firmware put it in PDA section.
If it's multiple put the files in the correct section.
5.Click start and don't touch the phone!Don't turn off computer and don't unplug the phone!It will reboot automatically and the first boot will take some time,so don't panic!
If you have "bricked" your s5830i a.k.a stuck at samsung logo just download Odin and flash PDA.tar form the link.
http://www.4shared.com/file/Ls2CAsHv/PDA.html
Everything you're doing is up to you!I'm not responsible if you don't read!There's a binary counter on s5830i so be careful with flashing!
Update:samfirmware.com provide us with odin 1.84 with .pit file for our phone so from now on you can flash firmwares from samfirmware.com without problems.
If I helped you,press the thanks button
Good, but, don't need a .pit?
Sent from my GT-S5830 using Tapatalk
ickyyy said:
This guide is for s5830i ONLY!!DON'T USE FOR s5830!!It can damage your phone!!
How to root Galaxy Ace s5830i.
1.Put update.zip in your main directory in the SD card.
2.Turn off your phone.
3.Boot in Recovery by pressingOWER+VOLUME UP+HOME buttons.
4.In Recovery select Install zip from sd
5.Choose update.zip
6.Reboot your phone and it's ready.There must be a Superuser icon in your Apps menu.
How to unroot
1.Exactly the same just put the file unroot in your main directory and folow the steps.
ClockWorkRecovery
1.Put the file ClockWorkRec5830i.zip in your main directory in SD again.
2.Turn off phone.
3.Boot in Recovery and select apply update.zip
4.Select ClockWorkRec5830i.
5.You have CWR but don't delete ClockWorkRec5830i.zip from the SD because
every time you want to use it you must install it from the SD!!
Flashing s5830i with Odin v1.85
1.Turn off the phone and put it in Download mode by pressing Power+Volume Up+volume down.
2.Open Odin v1.85.Run as Administrator!.
3.Put the files in Odin and don't touch the settings
4.If it's a one-file firmware put it in PDA section.
If it's multiple put the files in the correct section.
5.Click start and don't touch the phone!Don't turn off computer and don't unplug the phone!It will reboot automatically and the first boot will take some time,so don't panic!
Everything you're doing is up to you!I'm not responsible if you don't read!There's a binary counter on s5830i so be careful with flashing!
If I helped you,press the thanks button
Click to expand...
Click to collapse
You done press thanks button, you get the files from this thread.
maybe thats can help, for S5830 i is with the phone off press:
downloading mode : vol +- and power button
recovery mode : vol + home button and power , when appear logo return to black screen then stop press power button, when return logo press another time power button and stop press home button now we are in recovery mode.
root: update.zip
unroot: unroot.zip
cwm: clockworkrec5830i.zip
--------------------------------------------------------------------------------
Attached Files
update.zip - [Click for QR Code] (1.11 MB, 1 views)
unroot.zip - [Click for QR Code] (101.4 KB, 0 views)
ClockWorkRec5830i.zip - [Click for QR Code] (1.31 MB, 1 views)
s5830i don't have a .pit file...or there is maybe but i haven't used when i flashed a PDA part of a software and haven't seen it in any thread for s5830i..it works without a .pit
I break my ace s5830 i, I flashed from odin any file for other galaxy and now I cant get the ace in downloading mode, only I can entry in recovery mode from cwm recovery manager, I restored one backup but dont repair, bootscreen is smalled than original, What can i do?, I need help
pato66 said:
I break my ace s5830 i, I flashed from odin any file for other galaxy and now I cant get the ace in downloading mode, only I can entry in recovery mode from cwm recovery manager, I restored one backup but dont repair, bootscreen is smalled than original, What can i do?, I need help
Click to expand...
Click to collapse
you can try to do factory reset,wipe cache,wipe dalvik cache(in advanced) in cwm recovery,then install a rom or try to restore.
Sent from my GT-S5830 using XDA
i think there arent any costum rom for s5830i, or is there?
Sent from my GT-S5830 using XDA
Marco Chung said:
you can try to do factory reset,wipe cache,wipe dalvik cache(in advanced) in cwm recovery,then install a rom or try to restore.
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
I try all, but nothing good. I think only restore boot in a samsung service.
maybe can anyone have one zip file for restore the boot or all system, thanks.
boot screen image
help, anyone can uploaded firmware emergenci from kies, thanks.
cheers
try this
http://4pda.ru/forum/index.php?showtopic=298774&st=60#entry11619471
flash through CWM
if it don't help download this PDA
http://www.4shared.com/file/Ls2CAsHv/PDA.html
and flash through Odin 1.85 it should help you.
What exactly have you flashed ?! ..
ickyyy said:
try this
http://4pda.ru/forum/index.php?showtopic=298774&st=60#entry11619471
flash through CWM
if it don't help download this PDA
http://www.4shared.com/file/Ls2CAsHv/PDA.html
and flash through Odin 1.85 it should help you.
Click to expand...
Click to collapse
i cant connect it in mode downloading
thanks
pato66 said:
i cant connect it in mode downloading
thanks
Click to expand...
Click to collapse
try (Vol-Down) + (Home) + (Power)
as you have bought phone recently and things are not working properly.. final solution to get replacement is use Rom Manager and brick your phone to the point that its not booting
but as i said FINAL solution so try everything else first
Rafael.Baugis said:
try (Vol-Down) + (Home) + (Power)
Click to expand...
Click to collapse
I try it, nothing after flASH from odin a file from other galaxy.
Only I can enter from recovery mode to clockwork recovery apk
---------- Post added at 06:26 PM ---------- Previous post was at 06:18 PM ----------
madman_amit said:
as you have bought phone recently and things are not working properly.. final solution to get replacement is use Rom Manager and brick your phone to the point that its not booting
but as i said FINAL solution so try everything else first
Click to expand...
Click to collapse
Another solution before, I could flash from recovery any path or system image from your system? Its only one solution, I think, but Im not developer, I dont know that solution, thanks.
Other solution possible, could to be if we can flash any custom rom, dont you thinK?
I gave you link for flashable backup..put the foldier into clokworkmod->backup
boot into CWM and try restoring boot.img..if this don't work use ROM manager and hardbrick you'r phone.They will give you a new one or change motherboard..
Sorry for your loss :S
ickyyy said:
What exactly have you flashed ?! ..
Click to expand...
Click to collapse
For error one generic firmware for s5360.
pato66 said:
For error one generic firmware for s5360.
Click to expand...
Click to collapse
repeatedly telling not to do so and you did it.. your loss
you will get new phone replaced if you follow what i said..
madman_amit said:
repeatedly telling not to do so and you did it.. your loss
you will get new phone replaced if you follow what i said..
Click to expand...
Click to collapse
How to brick the phone with rom manager? something to have before brick.
Thanks
pato66 said:
How to brick the phone with rom manager?
Thanks
Click to expand...
Click to collapse
as i suggested before search some other devices forum if such thing happened to anybody and if they recovered..
main thing you 5830i guys are missing is pit file to use stock firmwares on sammobile

Categories

Resources