heya fellas!
earlier i couldnt install any custom ROMs on my phone..now i have a bigger issue..
i used the ODIN method..it was all good till when it re-booted n now frozen at the at&t logo screen..nothing happenning..cant go to the download mode either!
help me out people!!
thank u all!
Do you have samsung captivate (at&t branded galaxy s)? You can't flash I9000 (international galaxy s) roms to captivate.
jnr21 said:
Do you have samsung captivate (at&t branded galaxy s)? You can't flash I9000 (international galaxy s) roms to captivate.
Click to expand...
Click to collapse
i know but know that i have done this..now what..it was an international S i9000
i think i might have just used ODIN for samsung Captivate..what is going on with my phone? can i get it back?
If your phone is samsung captivate, you can try to flash stock captivate rom with odin.
There is captivate forum in xda: http://forum.xda-developers.com/forumdisplay.php?f=703
jnr21 said:
If your phone is samsung captivate, you can try to flash stock captivate rom with odin.
There is captivate forum in xda: http://forum.xda-developers.com/forumdisplay.php?f=703
Click to expand...
Click to collapse
no man its not a captivate..its a galaxy s i9000...av used the wrong ODIN...how do i come out of it?
Muru11 said:
no man its not a captivate..its a galaxy s i9000...av used the wrong ODIN...how do i come out of it?
Click to expand...
Click to collapse
Oh, i'm sorry. If you can't go to download mode with "vol down + home + power" combo, i think that you need usb jig. You can make it yourself or buy it somewhere.
http://forum.xda-developers.com/showthread.php?t=819551
Don't make so many threads for same problem.
jnr21 said:
Oh, i'm sorry. If you can't go to download mode with "vol down + home + power" combo, i think that you need usb jig. You can make it yourself or buy it somewhere.
http://forum.xda-developers.com/showthread.php?t=819551
Don't make so many threads for same problem.
Click to expand...
Click to collapse
thanx man!! let me get to work then!
once i do this..post me a link to a ROM and ODIN for this phone..
Muru11 said:
thanx man!! let me get to work then!
once i do this..post me a link to a ROM and ODIN for this phone..
Click to expand...
Click to collapse
ODIN (choose GT-I9000): http://www.sammobile.com/firmware/?page=5&t=1&o=1
Stock rom (choose I9000XWJVZ): http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=1#regiona
This stock rom come without root, so if you want it, you can flash some custom kernel e.g semaphore. Flash stock rom first and then flash custom kernel also with odin (kernel goes to bootloader box in odin).
Semaphore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
edit: You need to register to sammobile if you want to download.
ok..thanx for that..but can i go for a custom ROM rather than a stock one? plz gime the ODIN for that aswell..really appreciate ur help!!
Muru11 said:
ok..thanx for that..but can i go for a custom ROM rather than a stock one? plz gime the ODIN for that aswell..really appreciate ur help!!
Click to expand...
Click to collapse
Yes you can flash custom rom, but first flash stock rom. Most custom roms are cwm flashable, so you don't need odin to flash those.
- Flash stock rom with odin.
- Flash semaphore kernel with odin.
- Download some JVZ based custom rom from here.
- Put custom rom (whole zip, don't extract) to internal sdcard.
- Go to recovery (shut down phone, then press and hold vol up + home + power). When recovery menu appear, press vol up/vol down to move and power to confirm.
- Wipe data/factory reset, wipe cache partition, then go to advanced menu and wipe dalvik cache.
- When all wiped go back main menu of recovery and choose "install zip from sdcard" then "choose zip from sdcard".
- Find custom rom's zip file and flash it.
- Reboot your phone.
- Enjoy
ur the best man!!! am just waiting to fix the brick n then i do as above!!
i went into this state as of i cudnt get into recover, wen i did thru CWM i couldnt open the update.zip..it was strange..lets c!!
thanx a million!
jnr21 said:
Yes you can flash custom rom, but first flash stock rom. Most custom roms are cwm flashable, so you don't need odin to flash those.
- Flash stock rom with odin.
- Flash semaphore kernel with odin.
- Download some JVZ based custom rom from here.
- Put custom rom (whole zip, don't extract) to internal sdcard.
- Go to recovery (shut down phone, then press and hold vol up + home + power). When recovery menu appear, press vol up/vol down to move and power to confirm.
- Wipe data/factory reset, wipe cache partition, then go to advanced menu and wipe dalvik cache.
- When all wiped go back main menu of recovery and choose "install zip from sdcard" then "choose zip from sdcard".
- Find custom rom's zip file and flash it.
- Reboot your phone.
- Enjoy
Click to expand...
Click to collapse
done!!!!!!! hi 5 to u dude!!! am on darky ROM..i want to go to ICS..cm9...
Related
Hi
i read carefully the procedure for flashing the Ultibread! V1.3 based on 2.3.x but as a noob on flashing i did not fully understand. can anybody help me at the remarks as per the original description
I RECCOMEND INSTALLING FROM GINGER XWJV1:
do i have to flash that before updating via odin - this is a 2.2 ed.?
Get into download mode
flash a FROYO yes FROYO Speedmod kernel (make sure auto reboot is OFF)
where to get that and which version - pleas a link for dummies like me
Then pull battery and enter recovery mode
when to pull battery and how to enter recover< mode without battery ???
Then in CWK choose Ultibread-V1.3 and apply.
means most likely start in recovery mode and install from sd ???
Reboot
thanks a lot for helping a noob
br
norbert
I'll break it down for you .
1.Download the XWJV1 (it's the official 2.3.2) Firmware from samfirmware.com. Also download Ultibread and put it on your (internal) sd card
2.Flash it using Odin
3.Get into download mode by turning your phone off and then holding the volume up button + home button + power button
4.Download the SpeedMod K13C kernel from here
5.Flash the kernel using Odin (select the tar package under pda, make sure you don't repartition and turn auto reboot off)
6.After flashing remove your battery for 5 seconds and then put it back in. Turn your phone of while holding volume down + home + power. It will now go into recovery mode
7.Now select install update from zip. Select the Ultibread zip and your good to go!
Good luck!
Thanks for the breakdown - now i understand it too and i am almost done
as currently the speedmod kernel is moreless noch acassible for download - if it is just for rooting, may i also use cf-root instead?
bearno1 said:
as currently the speedmod kernel is moreless noch acassible for download - if it is just for rooting, may i also use cf-root instead?
Click to expand...
Click to collapse
you use speedmod to flash rom via cwm
I installed it over my doc rom.. And it worked correctly....
Some applications errored out... but after uninstalling them and reinstalling them everything is working correctly =) (at least it seems that way so far)
You should propably do a wipe and then install so you dont have problems with your apps =P
So yeah... you can probably skip all those nonsense instructions xD
Just do regular procedure because some users have experienced problems like:force closes, fuzzy screen and even soft bricking the device
renatofontes said:
I installed it over my doc rom.. And it worked correctly....
Some applications errored out... but after uninstalling them and reinstalling them everything is working correctly =) (at least it seems that way so far)
You should propably do a wipe and then install so you dont have problems with your apps =P
So yeah... you can probably skip all those nonsense instructions xD
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Read the tuto on original post ...
FuzionNL said:
I'll break it down for you .
1.Download the XWJV1 (it's the official 2.3.2) Firmware from samfirmware.com. Also download Ultibread and put it on your (internal) sd card
2.Flash it using Odin
3.Get into download mode by turning your phone off and then holding the volume up button + home button + power button
4.Download the SpeedMod K13C kernel from here
5.Flash the kernel using Odin (select the tar package under pda, make sure you don't repartition and turn auto reboot off)
6.After flashing remove your battery for 5 seconds and then put it back in. Turn your phone of while holding volume down + home + power. It will now go into recovery mode
7.Now select install update from zip. Select the Ultibread zip and your good to go!
Good luck!
Click to expand...
Click to collapse
help....
my phone stuck at start up screen??
XWJV1 firmware has to put in sd card?
porsche529 said:
help....
my phone stuck at start up screen??
XWJV1 firmware has to put in sd card?
Click to expand...
Click to collapse
OMFG...
You must flash XWJV1 by Odin !!!
Hey.im kinda new to android...i was using 2.3.3 gingerbr .
i was tryin to root my phone and get the cyanogen mod on it. through this link
i have a galaxy s i9000.after i flashed the zImage kernal. my phone is stuck on the start screen that shows the galaxy S logo.it stays that way . i can go to download and recovery mode though. but i really don't know what to do .. im a noob.your help will be appreciated
i can't post the link here for some reason.. just google "cyanogen mod galaxy s i9000" and youll see a link saying cyanogen wiki something.. and then you will see steps to get cyanogen.. please help
I find it easier flashing CM7 coming from froyo. What you need to do is flash JPU then flash speedmod kernel k13c (for the recovery) then go into recovery, then mounts and storage, format system, data, cache and datadata. Also wipe dalvik cache and wipe cache partition, then flash CM7. Holla if you need more help
Sent from my GT-I9000 using XDA Premium App
Thanks a lot for your reply . but as i said im a noob lol .. so step by step directions will do.. i know its a lot . .but i really need help hehe
Androidish said:
Thanks a lot for your reply . but as i said im a noob lol .. so step by step directions will do.. i know its a lot . .but i really need help hehe
Click to expand...
Click to collapse
Ok dude, download XXI9000JPU, latest nightly of CM7 and Speedmod kernel k13c before you do anything. Once you have all them (if your on a custom rom now, do a nandroid backup) if not don't worry coz you'll lose settings and apps anyways. Power off your device and put it into download mode (Vol down + home + power) then open Odin, and connect your device (a yellow box in Odin will confirm your phone has been recognized) extract JPU (if you download it from samfirmware.com the password will be samfirmware.com, exactly how its written) then in Odin in the left of the screen, check repartition, and in the .pit section, browse the JPU folder for the .pit file, in the PDA section browse the JPU file for the file with PDA in the name, the same with phone except it will be called "Modem" in the JPU file, CSC will be called CSC in the JPU file, once all files are in the correct place, and repartition is ticked, click start to begin flashing froyo. Once done, and the setup process has completed, make sure CM7 is on your internal SD card, power off your phone and put into download mode again, now with the speedmod kernel, make sure your download the Odin version from touristinparadise.com (it will be a .tar file) connect your phone to Odin again, untick repartition, and in the PDA slot, browse for the speedmod kernel, and press start, let your device boot fully, then power off and enter recovery mode (Vol up + home + power) release all buttons as soon as the Samsung logo appears. In recovery navigate to mounts and storage, format system, data, cache and datadata. Then go back and go to advanced speedmod and wipe dalvik cache, then go back and wipe cache partition. Then install zip from SD card, then choose zip, then browse for CM7 and install. Once done, go back and reboot device now your all set
Sent from my GT-I9000 using XDA Premium App
Here
http://forum.xda-developers.com/showthread.php?t=1101534
Insanity cm033/platypus neo9 redux 5
Odin is not detecting my phone when in download mode :S ... only detects when the galaxy s screen is showing.. and i cant get into the software guys .. its either the recovery or download mode only .. .
This is a drivers issue, have you made sure kies is shut 1st? If so uninstall drivers and kies then reinstall, our just install the right drivers for your computer
Insanity cm033/platypus neo9 redux 5
ok i'll do that and let you know how it went... Thanks a lot !
Hello,
I am completely new to flashing roms on android devices and i am just trying to understand the basics behind the process.
- Installing custom roms
- reverting back to stock firmware after installing a rom
I read the 4th post in this thread : http://forum.xda-developers.com/showthread.php?t=991792
i kinda have some understanding about flashing roms now but i still dont fully understand it.
My device is a Samsung Galaxy S i9000.
Thanks
What exactly do you want to know?
1. Installing custom roms is pretty easy the hard part is choosing the rom and to flash a rom you need to have the cwm recovery and like be on the base you need. ex: lets say you are on a jvt rom and you want to flash a jw1 rom, well in this case you dud need to flash jw1 from odin and then flash the rom from recovery...., but if you are on a jw1 custom rom, then in that case you can just flash the rom from recovery with wipe (recommended).
2. To flash back to stock: you dud need the stock file from sammobile or from wherever you get it and you would need odin, you place your phone in download mode then you put 512pit in the pit section/ code in the pda section/ modem in the phone section/ and csc in csc. then you have to make sure that repartition is ticked and all the others. make sure that the download is not interrupted for that would brick the phone.
-to flash a kernel you dud need to put the tar file in pda and Don't check repartition and click start.
I hope this helped a little
and remember to do this at your own risk.
Sorry for the noob questions but im just trying to understand haha
1. what are jvt and jw1 roms?
2. When you say be on the base you need do you mean the base firmware required for the rom?
3. How would i know which rom i have now, JVT or Jw1?
4. Whats the thing u mentioned whipe in "you can just flash the rom from recovery with wipe (recommended).?
last.5. I already found the stock firmware i have now and ive downloaded it for later if i need to restore it. but what is the tar file you mentioned in the end?
Thanks Man. I appreciate it.
yazzy44 said:
Sorry for the noob questions but im just trying to understand haha
1. what are jvt and jw1 roms?
2. When you say be on the base you need do you mean the base firmware required for the rom?
3. How would i know which rom i have now, JVT or Jw1?
4. Whats the thing u mentioned whipe in "you can just flash the rom from recovery with wipe (recommended).?
last.5. I already found the stock firmware i have now and ive downloaded it for later if i need to restore it. but what is the tar file you mentioned in the end?
Thanks Man. I appreciate it.
Click to expand...
Click to collapse
sorry, this is not meant to be offensive but you have a lot to read. There're some good tutorials on how to flash your phone here on xda. search for it.
short answers to your questions:
1. jvt or jw1 are versions of stock samsung roms
2. I think he means if you are on a jvt rom you should only flash custom roms for jvt
3. settings>about phone
4. wipe means resetting the phone, deleting cache and dalvik-cache
no matter what u know u first should know about flashing stock roms..in case u mess something up u will need to flash the stock roms,its a good thing that u have already downloaded these..then u should know how to install kernels to root n have Clockworkmod recovery,then u will be able to flash custom roms..u should serach the net for these questions with a 'How to' at first...
Instruction for new ROM installation
There are basically 2 methods for flashing a ROM
1. CWM recovery menu mode
2. Download mode.
1. For CWM recovery mode you phone must be rooted with CWM, just put the ROM zip file in sdcard of your phone of your choice. then power off the phone. Then you may want to boot in reovery mode for this use pressing and holding 3 button combination simultaneaously as Volume UP + Home key + Power key now you should be booted in to recovery mode there just wipe data/factory reset then wipe cache from option then find and select install from sdcard -> chose file zip from sdcard and press power key to selct and start flashing. wait max 5 min and your phone will be booted with new rom of your choice.
2. Boot in to download mode by pressing and holding 3 button combination simultaneaously as Volume down + Home key + Power key now you should be booted in to download mode now connect your phone with PC and open odin in PC then select ROM file as PDA, PHONE & CSC under propoer boxes then click start - wait max 5 min and you phone will be booted in to new rom.
Thanks
dktechdev.in
Enjoy...
1st - Rooting - visit http://gopalasubramanium.blogspot.in/
2nd - Custom ROMs List - http://alchemistar.blogspot.in/2010/10/samsung-galaxy-s-custom-roms-list-1014.html
3rd - Original ROMs List - http://forum.xda-developers.com/showthread.php?t=1102881
hello
i bought yesterday samsung glaxy s 9000
i want to install recovery to install roms in it
can you tell me what to do
or give me a guide and what is the best recovery to install i it ?
thanks
You need first to check that you can get into download mode by pressing volume down + home + power button.
then just flash as base kernel with odin or heimdall.
wooptarik said:
You need first to check that you can get into download mode by pressing volume down + home + power button.
then just flash as base kernel with odin or heimdall.
Click to expand...
Click to collapse
yes i can get into download mode
give me the best recoverry and tell me how to use odin ?
go on google and write: 'install firmware update on galaxy s i9000' - first link
you can update any firmware by this tutorial. other, newer firmwares are available on sammobile.com, have a look
after you flash base rom, you just need to a flash a new kernel with odin. i suggest you to use CF or Semaphore kernel.
recovery is already intergrated in thoose two kernels.
I can't record or play videos on my phone since i flashed this firmware and while flashing it it rebooted like 20 times i removed battery and charged it and did couple things with it so it started flashing. What should i do? Re-flash or something? (1,2 Ghz...
go in recovery,wipe cache,wipe dalvik cache,factory reset and reflash the rom.if dont work put the phone in download mode and install with odin an official fimware.if you have galaxy s plus (19001)go here:http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Gingerbread_2.3.6.download odin and ops from here:http://uploads.ro/dl2/meOnrKNeKbeD-fa62.now connect the phone in download mode on pc,unzip odin+ops,open odin select onepackage press ops in odin and select the unziped ariesVE,after press one package(select integrate package..)and select .md5.tar(fimware from downloade link).if you dont have samsung galaxy s plus and dont follow corectly the steps you can brick your device.im not responsable for you hapen!,i try to help you.
uNb0rN1 said:
go in recovery,wipe cache,wipe dalvik cache,factory reset and reflash the rom.if dont work put the phone in download mode and install with odin an official fimware.if you have galaxy s plus (19001)go here:http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Gingerbread_2.3.6.download odin and ops from here:http://uploads.ro/dl2/meOnrKNeKbeD-fa62.now connect the phone in download mode on pc,unzip odin+ops,open odin select onepackage press ops in odin and select the unziped ariesVE,after press one package(select integrate package..)and select .md5.tar(fimware from downloade link).if you dont have samsung galaxy s plus and dont follow corectly the steps you can brick your device.im not responsable for you hapen!,i try to help you.
Click to expand...
Click to collapse
i tried the first thing doesn't work, where can i get stock rom? thanks
endrit9 said:
i tried the first thing doesn't work, where can i get stock rom? thanks
Click to expand...
Click to collapse
put in download mode how i say and install an official rom with odin.after you will flash again recovery and update again to cm9