Hi, so I installed voodoo lagfix but its slower then the one I was previously using so I'd like to go back to that one.
The one thing is that to get rid of it you have to flash the stock kernel.
Could someone provide me with the kernel for I9000UGJH2?
Thanks alot.
get it here
http://samfirmware.webs.com/samsungandroid.htm
need Odin and 512 pit
Do I have to reparatition? Will my info be wiped or just reset to the other file system?
Sent from Samsung Galaxy S on Telus
Sent from my GT-I9000M using XDA App
it will be best to repartition as most of the lag fixes changes your partitions
Thanks for the help, I'm gonna wait out froyo, there isn't any notable difference in the two lag fixes just quadrant score.
Sent from my GT-I9000M using XDA App
I'm looking for a kernal for cog4 that won't kill my battery or freeze my phone (sadly the new suckerpunch is a no-go). I'm testing the firebird v2.10 I had with cog v3.04, but idk about speed and battery life. Also has no OC option.
Sent from your girlfriend's Captivate
I'm using suckerpunch #54 without a problem. Have you tried paragon?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Well on the kernel page it should say if the kernel will work for 2.x or 2.2.1 roms
Sent from my SAMSUNG-SGH-I897 using XDA App
Its based off of speedmod, will work with both 2.2 and 2.2.1 captivate roms. I'm thinking the overclock made it freeze up, which is unfortunate because I'm looking for a bit of stable OC
Sent from your girlfriend's Captivate
The only OC kernels I saw out there were i9000 series. Wonder if some true Captivate based kernels will show up.
Hi. I just looked at the dev section but couldn't find the right darkcore kernel that would allow me to overclock my phone. Does anyone know a modded darkcore kernel that can be overclocked?? And is compatible with darkys rom 10.2 extreme edition?? Thanks...
Sent from my GT-I9000 using XDA Premium App
Anyone???
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2
Quite a few peoples are using Semaphore dude! Works a treat with Darkys 10.2.
I think Semaphore JVQ_1.3.3 in particular as Darkys is JVQ based.
DarkCore doesn't support OC / UV.
Semaphore 1.4 worked perfectly when I was on Darky 10.2. Didn't try OC/UV though.
Galaxian has been said to work nice with 10.2 aswell and has UV/OC
scapula101 said:
Hi. I just looked at the dev section but couldn't find the right darkcore kernel that would allow me to overclock my phone. Does anyone know a modded darkcore kernel that can be overclocked?? And is compatible with darkys rom 10.2 extreme edition?? Thanks...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Semaphore allow OC. And it is stable too.
About phone:
GT-I9000
I9000XXJVQ
Semaphore_JVQ_1.3.3
DarkyROM JVQ v10.2
(GO Launcher, GO SMS, GO Contact)
Check the DarkyRom forums beta rom section for the XXJVR rom (my url's get truncated so the title is here - [ROM][CWM][SGS+Cappy] DarkyROM XXJVR BASE
).
Download Tegrak app from Market which will still allow you to overclock. There have been a few iterations and believe Dark Core 3.0 is latest version. I am at DC 2.9.3 and was able to OC to 1.1 (1.2 hung on me but I understand am on a beta).
While I have SetCPU, I cannot OC but Tegrak app works on Dark Core (don't know how).
I checked the tegrak overclock app. I have the ultimate version and saw that I can set cpu freq to 2000 I think... I have the dark core from darky 10.2. I am not sure what.values to set on the app to have either overclock of 1100 or 1200 freq..
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2
So far haven't gotten stable results passed 1.1. Keep getting hangs which need reboot. Even suspect about 1.1 so have kept quiet. Be curious what others have as well.
Sent from my GT-I9000 using XDA Premium App
Hi ! Am using xxjw4 and install Voodoo sound. Which kernel should I use ?
Sent from my GT-I9000 using XDA
Samsung didn't release the source of the kernel. No source, no Semaphore, no Voodoo.
Just a regular rooted JW4 kernel with voodoo control plus
I'm running CM10 nightly, and wondering if I will gain any performance improvement (without OC) and longer battery life if I flash one of the alternative kernels on XDA (looking at Devil and Semaphore as those seem to be the most popular)?
yes and yes, but it all depends on how you configure the kernel options and how you use your SGS...
Sent from my GT-I9000 using xda app-developers app
yes, definitely!
but to get the "best" result, of course you have to let it settle for atleast 3 days..
here is a youtube link on how to flash them: http://www.youtube.com/watch?v=kCBN-_zu5cY
i hope this helps,
cheers
Thanks for the answers. I was hoping for recommendations, do you have any?
Semaphore is looking good to me. Opinions?
I'd go with semaphore for ICS...
But for CM10 I'd use Devil..
But that's just me
Sent from my GT-I9000 using Tapatalk 2
If you want stability then semaphore.But if you want more tricks to make your phone even faster it is devil of course. There is one more kernel to try Mackay.
Test each to get the right one for you.
Sent from my GT-I9000 using xda premium
Semaphore is the one you need .
What else from having great speed with stability. Yeah, maybe Devil could provide some more speed, which is unnoticeable, for me at least.( except the benchmark tests )
Sema is the most stable one.
But devil isn't bad too.
Try them. But give your phone about 5 minutes after flashing and don't be frustrated when it's a bit laggy after first reboot.
Last days I tryed makay. --> I prefer sema
Sent from my GT-I9000 using xda app-developers app
I prefer devil. My phone still lasts a whole day (7am - 12pm) and is much faster. I like all the options.
Sent from my GT-I9000 using xda premium
On JB roms i always use the devil kernel even if the Semaphore is a very good kernel, Devil kernel allows me to entirely use my phone's habilities with no more battery drain than Sema
you will instantly notice more speed and smoothness with flashing semaphoer kernel.
+ more speed if you set up liveOC to 114%
Does anyone have any links? I'm using CM10 nightly and need a kernel so that BLM and Voodoo sound will work. I tried the latest semaphore 2.8.0 via Odin but the phone would not boot.
frazefast said:
Does anyone have any links? I'm using CM10 nightly and need a kernel so that BLM and Voodoo sound will work. I tried the latest semaphore 2.8.0 via Odin but the phone would not boot.
Click to expand...
Click to collapse
You should read the description more carefully. The 2.8 kernel is for JB 4.2 not CM10. Flash the 2.6.5 kernel.
Sent from my GT-I9000 using xda premium
Devil cause you are able to set wifi mode: powersave, stronger
Sent from my GT-I9000 using xda premium
Hello;
If I whant to get the most from my phone what kernel should i use and please if you can put some download links for kernel that you are suggesting.
Model Number:GT-I9000
Android version:4.1.2
Baseband version:I9000XXJVT
Kernel Version:
3.0.31.gdabec1a
[email protected]#1
CyanogenMod Version:10.0.0-galaxysmtd STABLE
Build number:
cm_galaxysmtd-userdebug 4.1.2 JZO54K
eng..20121113.054130 test-keys
Thank you for your time and suggestions.
The one and only Semaphore. Newest version 2.6.5(s)
The (s) is for if you use 403MB RAM configuration.
www.semaphore.gr
Sent from my GT-I9000 using Tapatalk 2
I have few more questions...will i flash only kernel or i need to flash the rom together with kenrel...and can i use odin to flash kernel?Sorry for all thease questions im noob guy in this area
You don't have to flash a rom if you're happy with the one you're using. And you can download .zip's and flash in CWM if you like, but I've found that the only times I've ever got into a boot loop when flashing a kernel are by doing it this way. Not that it has happened often. But for that reason, i prefer to flash my kernels .tar in odin, I've never had a problem doing it that way, but whatever way you choose to do it take a nandroid first, just in case.
Sent from my GT-I9000 using Tapatalk 2
Kernel flashed via odin...everything works perfectly! Thank you
LeRadelle said:
Kernel flashed via odin...everything works perfectly! Thank you
Click to expand...
Click to collapse
Glad to hear it. No problem
Download semaphore manager app if you haven't already done so. Also, if you used the (s) version, you need to make sure and select the bigmem option in semaphore manager and reboot for settings to take effect. Then you have 403MB RAM.
Sent from my GT-I9000 using Tapatalk 2