Related
So i decided to go on a Flashing spree today for no reason, i just felt like it..
I started out by flashing 2.2 on my 2.1 phone, that all worked out quite well, but for some reason i could not root it. ( I used http://forum.xda-developers.com/showthread.php?t=845558) It all worked out nicelly but since i could not root it, i just game up on it.
After searching i found http://forum.xda-developers.com/showthread.php?t=734475 to revert my phone back to its original firmware. I have a Galaxy s Vibrant, so i thought it was the correct thing. But since i installed it i have alot of problems.
First of all, when i plug it into my USB the phone auto turns off. And it will not charge when the usb is in.
I have rom manager installed, but when i try to run a rom, i keep getting the error (status = bad ).
Also the phone wont recognise my SimCard so i cant stay with this firmweare anyways.
flash back to a stock Froyo
then boot into the Recovery Mode
then wipe data, and wipe cache
see if that helps
Do you know the best place where i can get a stock froyo rom ?
amnoric said:
So i decided to go on a Flashing spree today for no reason, i just felt like it..
I started out by flashing 2.2 on my 2.1 phone, that all worked out quite well, but for some reason i could not root it. ( I used http://forum.xda-developers.com/showthread.php?t=845558) It all worked out nicelly but since i could not root it, i just game up on it.
After searching i found http://forum.xda-developers.com/showthread.php?t=734475 to revert my phone back to its original firmware. I have a Galaxy s Vibrant, so i thought it was the correct thing. But since i installed it i have alot of problems.
First of all, when i plug it into my USB the phone auto turns off. And it will not charge when the usb is in.
I have rom manager installed, but when i try to run a rom, i keep getting the error (status = bad ).
Also the phone wont recognise my SimCard so i cant stay with this firmweare anyways.
Click to expand...
Click to collapse
It looks like you flashed the actual "Vibrant" (T-Mobile US) type firmware onto your Bell i9000M phone... I dont know if you can flash back as the Download and Recovery modes for the actual Vibrant are different than the i-9000 model phones...
@Allgamer, can you be of any further help?
btw i really hate Samsung right now, why would you release a phone called a i-9000m Vibrant, then release a phone under the brand name vibrant
amnoric said:
btw i really hate Samsung right now, why would you release a phone called a i-9000m Vibrant, then release a phone under the brand name vibrant
Click to expand...
Click to collapse
I agree with you on this man. How confusing could they make it? I guess they did it to sort of distinguish our model of i9000M from the International version but couldnt they at least give a different name from the U.S. model?
They even look identical except for the fact that the U.S. Vibrant has 4 soft keys at the bottom where we have the 2 soft and 1 hard key...
Well now that my panic attack is over and my phone is back to normal after Flashing 2.2 on it ( FOR I-9000m even ).
I have another random question..... what is the best way to root 2.2.. since the whole point of the **** up was because i would not root it
amnoric said:
Well now that my panic attack is over and my phone is back to normal after Flashing 2.2 on it ( FOR I-9000m even ).
I have another random question..... what is the best way to root 2.2.. since the whole point of the **** up was because i would not root it
Click to expand...
Click to collapse
I recommend the app called z4root by RyanZA. You can find it on the Market. It is a one click root that requires no flashing of any kind.
You may have to start the app and if it seems to hang for a while just perform a reboot and run the app again and it will root within 30 seconds. Also be weary in the Market as someone has stolen the icon and everything from RyanZA and the "rip off" app is NOT complete. Make sure the one you download states it is from RyanZA...
Hi
Kies killed me when I was just trying to update to Froyo officially. Since then I used Odin 1 click and everything seems ok, except for the fact that its att now. I want to eventually get to official rogers 2.2 froyo with no gremlins lurking hidden in the file system. I downloaded the i896 rogers 2.2 rom. How can I install it so that my phone will be stock 2.2? Same boot loader, same rom, same everything as if the update had gone smoothly through kies. I want it to be rogers only.
Well, thanks to all for you help.
And a special thanks to the Kies programmers. I have bricked devices trying to install unofficial things before but I have never bricked a phone through official channels, Amazing work guys amazing.
Thanks to the xda community for again saving my rear
I think if you search there is a Odin for a stock rogers. I will have to look....
Try this thread for rogers stock rom
http://forum.xda-developers.com/showthread.php?t=846501&highlight=odin+rogers
Hi,
more problems. Even though ODIN said it was sucessful it just went to the battery icon. Now the phone shows att logo for a second, reboots and does it again. Not even sure if I can get back to download mode! All this for a friggin official update!
ok I need to calm down. But this is really upsetting
I have a AIO rogers 3.0 tool kit, and I have a stock rogers rom. I do not however know how to get it onto my phone. The odin program just has start.
The rogers AIO program has back up to stock but always says cannot communicate with device.
Please help, I have no idea why things have been so messed up.
same happen to a friens of mine that wanted to flash unleashthebeast...and he changed his mine after and i odin one clicked and it did the same...luckily he was under 30 days...but only other option is a jig.
Evilspawn said:
same happen to a friens of mine that wanted to flash unleashthebeast...and he changed his mine after and i odin one clicked and it did the same...luckily he was under 30 days...but only other option is a jig.
Click to expand...
Click to collapse
oh and if u can get into download mode your good....if not...a jig
Seriously?
The only way to recover this phone is to make some crazy usb solder jiggy?
My phone shows only ATT or if USB is plugged in, a battery icon. No button combo is working for DL mode, where as it was before.
Any ideas on how else I could get this phone into dl mode?
Thanks again
Chris
Looks like you and I have a similar issue. Subbing to thread for hope.
What about using the AIO toolkit to at least get a working ATT branded phone? I too used the AIO toolkit to flash a custom rom on my Rogers phone and yes, though I don't believe it was supposed to the AIO toolkit put the ATT stock on rather than Rogers stock. However, at least you'd have a working phone at that point. Unless you need to return your phone you can use it as is until you find a proper solution.
I know it's a stopgap solution but working improperly is better than not working at all.
Christopher888 said:
Seriously?
The only way to recover this phone is to make some crazy usb solder jiggy?
My phone shows only ATT or if USB is plugged in, a battery icon. No button combo is working for DL mode, where as it was before.
Any ideas on how else I could get this phone into dl mode?
Thanks again
Chris
Click to expand...
Click to collapse
Built a jig this morning, phone went into download mode with a quickness. .99cents at radio shack some duct tape, and a steady hand.
Stocks
http://forum.xda-developers.com/showthread.php?t=905042
ATT bootscreen problem
http://forum.xda-developers.com/showpost.php?p=11327700&postcount=209
in case some of those guys confused you, a jig only helps you if you cant get into download mode. you already flashed successfully after the brick, right? you dont need a jig. follow the instuctions above.
if you get AIO toolkit working (rogers edition) DONT USE A PIT FILE, DONT RE-PARTITION, (pit file is for partitioning). the rogers stock images dont have dbdata to work after repartition. this is what screwed me the other day., and i was forced to use ODIN1 Click. and now have the same ATT bootscreen as you.
as im in the same boat ive been researching and the above method wont work. its only for i9000 based roms. not the stock based roms like the att. and the fix replaces a file named logo_ATNT.jpg (AT&T)
this *fix* isnt too much of a *fix* and i have yet to come across a rogers flash that will replace this att crap.
So that means if we were to return our captivates for a refund, we're stuck with the split second AT&T boot logo. I wonder if they'll mind...
if your phone breaks to the point that you must return it, *MAKE SURE* its broken enough that they cant read/use the phone. Sticking it to the back of a speaker magnet for 10 minutes should do. ive heard of using a microwave fore a few seconds but it may do visible damage.
So after all the excitement of 2.3.3 while trying to flash the new firmware Odin is stuck on either "param.lfs" and occasionally it gets past that to 'zImage'. There is one blue bit of the bar showing on the Downloading part of the phone.
I have re-installed kies, downloaded a couple of different versions of the firmware just in case and I'm using Odin v1.30.
I downloaded the XXJVK, used the 512 PIT and re-partitioned.
Any help is appreciated as I'm worried I've killed my phone!
Thanks,
Steve
Try using odin 1.8 and see what happens, 1.3 is pretty old.
Thanks, downloaded 1.8.2 and still the same unfortunately.
After a quick google search, I used a different USB cable and everything worked fine.
I was using one of those thin "pull out" ones and now using a standard one.
How bizarre is that?
Steve
boxst said:
After a quick google search, I used a different USB cable and everything worked fine.
I was using one of those thin "pull out" ones and now using a standard one.
How bizarre is that?
Steve
Click to expand...
Click to collapse
Only recommended cable supposed to be safe its well posted and faqed .
jje
So I used to odin one click to downgrade my captivate from 2.2 froyo to 2.1 eclair but every time that I used odin and my phone restarts it is stays stuck on att logo or it stays on the charging screen. Any suggestions???
jcc310 said:
So I used to odin one click to downgrade my captivate from 2.2 froyo to 2.1 eclair but every time that I used odin and my phone restarts it is stays stuck on att logo or it stays on the charging screen. Any suggestions???
Click to expand...
Click to collapse
Yes, do a search. some phones that come with 2.2 already installed can not use the one click method. This has been covered many times already. Please search before opening a new thread
hey guys i have a captivate that i tried flashing and was successful then i tried again and the screen went black. im not sure if my battery died during the process or what but idk what to do. I cant get into recovery mode, i can only get into downloading mode but none of the odin's ive downloaded have recognized my device today. they worked fine yesterday. then i tried "hemidall one click" to try and get it back to stock but no luck. also when i try to power on I get the "Cornkernel" loading screen since that was the kernel i had loaded when it was working, but it fills the bar then shuts off. so it seems like im going to be at the mercy of a computer program since i am unable to access anything on the phone, right? I recently upgraded to gingerbread before all of the flashing of the new roms. all i want is to get back to either froyo or gingerbread, i dont really care, heck ill even take 2.1 at this point. if anyone knows whats going on and can help me thatd be great.
Thanks
Remember to use a rear usb hub for destop and run as admin. Heimdall will mess up your odin drivers.
You may also want to check out the captivate connection issues thread.
Also, to clarify further on prbassplayer's point about Heimdall, it will write its drivers over the drivers assigned to the USB port you are plugged into when it detects your phone. So if you have 4 USB ports and you use port 3 for Heimdall, it would look like this:
1 - Odin port
2 - Odin port
3 - Heimdall port
4 - Odin port
All this means is that you'll need to be aware of the port you used with Heimdall, or just reinstall the odin drivers (they'll overwrite the Heimdall setup).
OK so i tried what you mentioned in that thread on the connection issue and unfortunately it didn't work. is there a way i could start fresh? like delete all the drivers from my computer and then try it again, or do u not think that would work? im open to any ideas/suggestions right now because i hate having an extra paperweight and the thought of buying a new phone.
Don't know if this'll help or even why it worked for me but, when I had problems with odin recognizing my phone, I reinstalled/repaired samsung kies and odin would work for at least one flash.
Note: used full odin (not oneclick)
Good luck
hey guys thanks a bunch i finally got it to work. i had to use a different computer like you said. What a great feeling to have a functional phone again..
Thanks Again!!
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
blackjack54 said:
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
Click to expand...
Click to collapse
Kies sucks lol
look at my sig the first "go to" has the One Click Odin file to get you to stock and rooted 2.3 ...should take no more then 5 mins to do it
the link on that page for the 1 click odin doesnt work.
Try looking >>HERE<<. There are more one clicks there than you will ever need (hopefully)
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
blackjack54 said:
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
Click to expand...
Click to collapse
if you have never flashed GB bootloaders, you need to. Just oonce will work from that time forward. After you flash bootloaders, it's best to avoid them. A bad bootloader flash is one of the few things that will turn a Captivate into a paperwight. About which GB to use, I would say KK4. Its the same as the Official KK4 that was released. So to recap, flash bootloaders only once, then use no bootloader packages after that.
Im not sure if I unlocked them or not honestly. I know i had the phone rooted at one point and was running Cerberus rom. is there any way for me to check?
If you don't know, flash them.
ok i apologize in advance if this is a stupid obvious question..i got the odin one click and i was looking at the page u referred to me to and im wondering what the kernel is for? you cant place it in the odin one click obviously so is that just to keep things together or do i actually need it?
The kernel links are just to use if you want to root the stock rom. You have to use full Odin for those. Stick with the one click until you feel more comfortable in flashing AND do a lot research before your next flash.
so i got the KK1 gingerbread working and everything seems to work fine but now my data doesnt work. So I cant get ATT 3g or edge or anything the only internet i recieve is wifi. anyone know why this is? or how to fix it. ive tried a reboot and nothing ive tried changing the settings under network settings.