I had my Diamond for about 8 months now. All of a sudden no matter where I click on the screen it always clicks on the top left corner (Start button). I hard reset the phone, changed SPL but nothing worked.
My Specs:
Duttys 5.2.20764.1.4.3
Diamond-hspl-1.24
When I try to align the screen it keeps on looping not letting me get out of the screen alignment. I have to soft reset the phone.
Is my phone dead? Do I have to send it to HTC for repair?
sounds like a broken screen digitizer (the plastic which recognizes touch).
If its under warranty then i suggest you flash everything back to factory, ie. stock spl, stock ROM. Then RMA it back for warranty.
If it isn't under warranty and you wanna get it repaired. Then just order a new digitizer from Ebay and install it yaself. That will save you an arm and a leg, since HTC will probably charge you like 4x the price to get it fixed.
How come it responds to the screen alignment than? When I press the cross hair it responds to it and moves to a different position.
Right now I am trying to put the stock SPL on the phone but I can't get past the screen alignment. The is synced and everything. Any ideas?
You MUST change the ROM to stock first then the SPL
I did put the stock ROM back on the Diamond. But I can't get passed the align screen. I tried deleting the "welcome" file form \Windows\StartUp but the file is protected and can not be deleted. Is there any other solution of by passing the welcome screen?
I had this problem too, I got my Diamond from Rogers and went home. After a few minutes this started to happen, and I instantly went back and got a replacement.
I got same prob. But sometime it work fine, after i do softreset i cant skip screen align. Can hard reset fix this prob? im from malaysia, how much it'll cost to replace the digitizer? thanks
i have this problem too
hello all!
I had the same problem as you! after some time searching... found a program called "Remote Screen Alignment" ... and your problem is solved!
Just google it!
caudex said:
sounds like a broken screen digitizer (the plastic which recognizes touch).
If its under warranty then i suggest you flash everything back to factory, ie. stock spl, stock ROM. Then RMA it back for warranty.
If it isn't under warranty and you wanna get it repaired. Then just order a new digitizer from Ebay and install it yaself. That will save you an arm and a leg, since HTC will probably charge you like 4x the price to get it fixed.
Click to expand...
Click to collapse
For the new diditizer is this easy to repair by myself??
I have a broken touch screen too (LCD is working perfectly, touch is non responsive, all over the screen)
I was just reading in another thread that changing the digitizer on its own is a bit of a nightmare as its glued to the LCD screen? Is this true, is this the case, if so, would it be possible to buy a LCD + Digitizer in one? I searched eBay but could not find anything?
Any help is much appreciated as the cost of a new phone is not an option!
Thanks,
DG.
DanGlee said:
I have a broken touch screen too (LCD is working perfectly, touch is non responsive, all over the screen)
I was just reading in another thread that changing the digitizer on its own is a bit of a nightmare as its glued to the LCD screen? Is this true, is this the case, if so, would it be possible to buy a LCD + Digitizer in one? I searched eBay but could not find anything?
Any help is much appreciated as the cost of a new phone is not an option!
Thanks,
DG.
Click to expand...
Click to collapse
Hi
My digitizer is also broken, I ordered new one from ebay (cost about 10 €) and as you wrote replacament is nightmare.
I'm trying to find a manual or instruction video but I cannot find anything.
If somebody knows how to replace digitizer please let me know or share a link for it.
Currently my best solution is to order new digitizer with display (cost about 20€) It is possible to order for exaplme here:
http://cgi.ebay.co.uk/NEW-FULL-LCD-...UK_Mobiles_Accessories_RL?hash=item518e98a7fa
Cheers
hello, i have the same problem with my diamond here, pres the screen and it activates the left upper corner, after a while stoped doing that but not my right lower part of the screeen doesnt respond. i mean i press the "j" and it writes "k".. u know what i mean., i cac calibrate the screen but after 1 min the problem is back. i wanna buy that digitizer and change it but b4 this i need a confirmation, did anyone do it and after that their diamond worked like b4? waiting for reply thx
This post is giving me a nightmare. I am facing similar problem only its not permanent. What I mean is it woks fine sometimes but wont respond sometimes. Sometimes it responds in the corners if I press hard. I think my phone is just passed its warranty also its 2nd hand though I have the bill. Service centers are really bad so I am scared.
Do you'll think my digitizer is gone bad or is it a software glitch?
Hi guys
I have a similar problem with my HTC Touch Diamond,
The screen just gone crazy constantly pressing on the top-right corner, this happened like 1 week ago. After searching the internet and this forum I found out that my only quick solution is to hard press the four corners to get working properly again but the problem will come back again after a while.
I bought this phone from ebay in 2008, had no problems with it untill I found out this ugly strange colored square in the middle that is noticable after switching phone's backlight off, I guess that was due to me holding the phone in my jean's back pocket (as I used to previous phones non touch ), I had this phone working perfectly until what happened last week!
I decided to find if this is a software related issue, so I upgraded to official HTC ROm 2.03.405.3 WWE, but the problem persists
I also bought a digitizer from ebay in case I want to replace it (but never done this before)
Can anyone please confirm if I am still under warranty, how to check this and if yes is that going to cost me anything to get it returned to HTC for repair (other than postage costs of course)
If not under warranty anymore, do you advise me to get a LCD+Digiztizer combined instead ?
Many thanks !!!
Damian
I have this problem (not my video):
youtube > watch?v=5-IUzerAT0s (sorry, I can't post links)
Problem:
Sometimes, and really just sometimes, no matter where I touch the screen it only signals a left touch. So wherever I touch, 1, 2 or 3 - only 1 will enter.
I am not sure if this is related, but it may give some clues:
A few days ago I disassembled my Diamond. I did not take out the LCD coz it's sort of glued in and probably hard to take out and may break.
However, I got down to the digitizer soldering. I did not de-solder the flat-cable, but I pressed my solder iron on each of the 4 solder joints. I pressed the solder tip right on the film. Don't worry, it's most likely polyimide and it's heat resistant.
After that the Diamond worked well, well, for a few days. Then same happened again. When I have the problem and I press strongly right of the HTC logo (LCD bottom right) the problem disappears. That makes me thinking the problem is maybe mechanical.
It maybe a solder crack. I presume the Diamond is RoHS, and my solder iron was not RoHS. That matters, coz RoHS solder needs more heat the lead solder. Means, my solder iron did not really melt the solder under the film.
I will give that another try with an RoHS solder iron in the next few days.
minidisco said:
I have this problem (not my video):
youtube > watch?v=5-IUzerAT0s (sorry, I can't post links)
Problem:
Sometimes, and really just sometimes, no matter where I touch the screen it only signals a left touch. So wherever I touch, 1, 2 or 3 - only 1 will enter.
I am not sure if this is related, but it may give some clues:
A few days ago I disassembled my Diamond. I did not take out the LCD coz it's sort of glued in and probably hard to take out and may break.
However, I got down to the digitizer soldering. I did not de-solder the flat-cable, but I pressed my solder iron on each of the 4 solder joints. I pressed the solder tip right on the film. Don't worry, it's most likely polyimide and it's heat resistant.
After that the Diamond worked well, well, for a few days. Then same happened again. When I have the problem and I press strongly right of the HTC logo (LCD bottom right) the problem disappears. That makes me thinking the problem is maybe mechanical.
It maybe a solder crack. I presume the Diamond is RoHS, and my solder iron was not RoHS. That matters, coz RoHS solder needs more heat the lead solder. Means, my solder iron did not really melt the solder under the film.
I will give that another try with an RoHS solder iron in the next few days.
Click to expand...
Click to collapse
I have the same 'tendency to go left' problem. From my experience, I found that the problem could be caused by heat. Here are some examples when it goes wrong: When I use Tomtom navigator while charging the battery, the phone really heats up and starts to go 'left'. When I try to text message under the sun after taking it out from my pocket. When I have high usage such as wifi + opera. Really hop somebody can come up a solution for the problem...
The Reason ---
Its a heating issue seen in 20% of all shipped diamonds. It heats and expands the digitizer causing loss of touch.
Solution ---
I'm working on it!
P.S - The heat i'm talking about is not the heat that's generated wile using the phone , its due to outside exposure.
Crazy thought - Try it at your own risk
Exposing the mobile to moderate temp (cold , say 12-14 degrees) might help. Not sure.. i said MIGHT.
Don't try this if its under warranty. And don't blame me if you did something wrong and all you circuits get messed up!
Anyways will post if i hit something on the way!
No, new solution??
Maybe change the digitalizer solves the problem?? Because two months ago the problem only stay few minutes but now i can't make the alignment process.
Thanks!
so i dropped my x1 today on the corner(yea... thnx invisibleshield) and it got ruined. the screen itself just doesnt seem to work anymore, i take out the battery and put it back and try to turn it on and it only vibrates, the screen shows nothing. any help? thnx
remove the battery. Apply pressure, great one, on the slightly bulging part. this is the area where the main board connects to the screen. if it still wont work, bring it to the service center.
I have dropped mine, and i openned everything then miraculously it worked again.
okay, which slightly buldging part? i appreciate the help.
can anyone help? i realy dont want to open it and i dont have warranty.
Hi i'm in need of serious help!!!
I dropped my phone on a night out (Must add wasn't even drunk yet)
I realised my G1 screen was messed up later. Its black with a white stripe down the righthand side. Sometimes theres colours flashing through it. Is there anythin i can do to reset it? Or should i take it to a repair shop? or is it gone forever :'(
Please Help
x P x
You can replace the screen or digitizer from a bricked phone and hope it works. Or send it back to t-mo/htc if it is still under warranty.
Hey guys, so the screen on my galaxy mini is broken, after i was driving with it in my pocket. I think too much pressure might've pressed down on it and broke it. The touch/digitizer is still working however, but i cannot see 4/5 of the screen, it is just white. I know the touch is working because i can see movement in the small section i can see when i turn it on and play around with the screen.
So, my questions are, how hard is it to replace the lcd screen myself? if at all possible? and also where can i find a replacement screen? are there any special tools/accessories i must need to replace it?
Help will be MUCH appreciated!
i would recommend u to go to samsung service centre and get it replaced
and please do not try to do anything urself with the phone
Just go to Samsung Service centre, this is the best option
a have the same problem with my galaxy teos.
and by trying to replace the screen I manage to damage my phone more.
so
Samsung Service centre,
this is the best option
Hello Guys
I'm Facing a wierd secreen problem on my Note 8. It was working fine but out of nowhere one day on the bottom right corner of my phone i can see a black patch/dead pixel/ screen defect whatever it is called and now i can't get rid of it i tried restarting but it didn't work. My phone is out of warranty so i cant get it fixed without getting the screen replaced. There is no screen damage. Please help me find a solution for this.
Sorry, but I think the led panel is damaged,, so, only solution is to replace it, some 250 dlls