Related
dear members
i've just installed the gps-enabled dopod rom and whenever i try to switch the built in key board to an arabic enabled keyboard that comes with the arabizer program (sold separetly from 2 companies, imaginet & informobility) , it refuses to change.
i even istalled resco keyboard pro but with the same problem.
does anybody know how to solve this problem?
is there a hack or a change in the registry that enables me to use any arabic enabled keyboard?
thanks for your help.
vasa vasorum said:
dear members
i've just installed the gps-enabled dopod rom and whenever i try to switch the built in key board to an arabic enabled keyboard that comes with the arabizer program (sold separetly from 2 companies, imaginet & informobility) , it refuses to change.
i even istalled resco keyboard pro but with the same problem.
does anybody know how to solve this problem?
is there a hack or a change in the registry that enables me to use any arabic enabled keyboard?
thanks for your help.
Click to expand...
Click to collapse
I can't get RapidCalc keyboard to load either. Other people have complained about keyboard software not loading also. Hopefully a Rom upgrade will fix the issue.
dear matterhorn
thanks for your reply. hopefully there would be a solution for this problem.
waiting for the experts to reply.
please guys >>>>>>>>>>>> around 100 visits and only one reply
pleaseeeeeeeeeeee i need a help.
Have you tried to set the non-loading keyboard as default input method using SKTools or SIPChange?
It did the trick with HTC PhonePad which also refused to load.
Apoc said:
Have you tried to set the non-loading keyboard as default input method using SKTools or SIPChange?
It did the trick with HTC PhonePad which also refused to load.
Click to expand...
Click to collapse
I Tried the SKTools, and my Trinity started to freeze right after softreset, so I had to do a Hard-reset
Tried the SIPChange, and viollaaaaaaaaaah my arabic keyboard is working now.... I didn't even change the defaults, I just installed the SIPChange and everything is normal
Thanks
dear apoc & mo7al
thanks for your response. i tried sktools but i couldnt figure out how to do it.
i have never heared about sipchange. can you send me the program and how to set the keyboard, please
thanks for your response
vasa vasorum said:
dear apoc & mo7al
thanks for your response. i tried sktools but i couldnt figure out how to do it.
i have never heared about sipchange. can you send me the program and how to set the keyboard, please
thanks for your response
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=271008
thanks a lot. you are really ra3eeha
hi there
still having the same problem ...
sipchange didnt work with me
RESCO Keyboard PRO worked for me.
You need to set ARABIC as the Primary Language, softrest.
I also tried another method and it worked as well. I extracted all the files from the extended rom beofore upgrading the ROM and then reinstalled them after the upgrade. The extended ROM files I extracted already included the IMAGINET Arabization.
Try these methods and let us know the results.
ajram said:
RESCO Keyboard PRO worked for me.
You need to set ARABIC as the Primary Language, softrest.
I also tried another method and it worked as well. I extracted all the files from the extended rom beofore upgrading the ROM and then reinstalled them after the upgrade. The extended ROM files I extracted already included the IMAGINET Arabization.
Try these methods and let us know the results.
Click to expand...
Click to collapse
Put my unit did not have imaginet arabizer on it.
Can you upload this files?
dear ajram
thank you for your reply. we'll be gratefull if you can upload the imaginet files that are extracted from the arabic rom.
I am using vgakey now and it is working. but sometmes it refuses to appear.
waiting for you
Here you go!
Thanks for the files I will try and give you the result
Works perfect and the keyboard issue is solved (until now). Was there any other imaginet files (Like the Dictionary and prayer times). If yes please complete your kind effort and post them.
Thanks in advance
Glad it is working for all.
I think the 2 cab files PP_AKv30-DefaultPage_ALL.CAB and PP_AKv33-DefaultPage_ARA-0401.CAB are the ones that are making the difference.
With regards to the other maginet applications, they came on a seperate CD. I will try to upload them later if the size permitts.
Dear ajram
it worked perfictly
thanks a lot
ajram said:
Glad it is working for all.
I think the 2 cab files PP_AKv30-DefaultPage_ALL.CAB and PP_AKv33-DefaultPage_ARA-0401.CAB are the ones that are making the difference.
With regards to the other maginet applications, they came on a seperate CD. I will try to upload them later if the size permitts.
Click to expand...
Click to collapse
Appreciate your help - waiting for your kind upload
Note : Until now (72 hours) Not a single problem with keyboard switch - thanks to ajram
Thank you very much, Realy it worked.
I belive you need only the 3 arabizer files to solve the problem which are,
CAB: \Extended_ROM\INCert_B377_2.CAB
CAB: \Extended_ROM\ACERTTahoma_HTC_B377_2.CAB
CAB: \Extended_ROM\MultiLang_AR_HTC_B377_2.CAB
These files are working on my device having no problem so far.
Thanks again.
can someone pls post a WORKING STK that works under WM6. badly need it, this is the one feature that WM2003 has that WM5 or WM6 seems to lack. so if anyone managed to find an STK program that works. pls upload.
yup me too.. i need it badly..
anyone who had read this thread? help pls..
use search>STK and find that there are already several threads discussing it. There is no working WM6 STK (yet?)
yup, did search already, but all are under WM5 thread headings and etc. im just making this an easy to use and search thread under WM6, so if there will be one, it will be easy to find.
We try our best to get the STK working but no luck! Sorry man!
thats what i said to them...that U and I were working on it.
any ways h r u..long time no see
u can try HTC Sim manager
ather90 said:
thats what i said to them...that U and I were working on it.
any ways h r u..long time no see
Click to expand...
Click to collapse
Sorry man, I've been busy with my hobby, riding bmx (flatland). Sometimes I'm playing WarCraft III (DotA). Don't worry man, I visit our site but very often. I am also searching other sites that have a pocket pc forum. Maybe they have solution to our problem, and share to others.
Take care man! Merry Christmas!
hmm..well take care..and merry christmas to u tooo
re: stk
hey der can you try this sim tool kit i copy from another xda device in my country? can you guys give feedback here.. just paste it on windows folder and copy shortcut to programs. ill be waiting for your feedbacks, hope this work for us..
It's working!!
on my qtek2020 with helmi wm6 tofclock
thanks sakurasyaoran
theBisk
thank GOD...are u sure its working fine just as it did in Wm2003
it is not working....
i tested an O2 ZINC
and found that STK was working on that device. it was running WM5 and as per my deduced reasoning, there is no engneering design difference between XDA 2 and ZINC with regards to simcard holder and software for the simcard.
i also found some file differences between my XDA 2 running WM6 and the ZINC running WM5, i tried to download some files like stkui, sim...something, and other dll and such files from the ZINC unit (it was not mine) but activesync could not copy the files.
i know that those files can help me make the STK run in XDA 2 WM 6. if someone can post files from ZINC, thats probably will start with stk or sim please do upload all files, and i will test running them on XDA 2. please, thanks.
for those who have other devices running WM6 or WM5, please post some files from your WINDOWS folder, some of those or a combination of those will make the STK work for WM6 on O2 XDA.
by the way, the posted STK.ZIP will run the STK menu but only on the first menu level, it will not activate the next level menus.
thanks.
@paulpax..use resco explorer to copy the files somewhere on ur card..thn transfer them to ur pc bya card reader....
paulpax said:
for those who have other devices running WM6 or WM5, please post some files from your WINDOWS folder, some of those or a combination of those will make the STK work for WM6 on O2 XDA.
by the way, the posted STK.ZIP will run the STK menu but only on the first menu level, it will not activate the next level menus.
thanks.
Click to expand...
Click to collapse
yup i agree with you bro! but until nw i dont knw y does simtoolkit doesnt work on xda2 wm6. guys out there pls post your stk running on wm6 here, attach file here.. this wud be a great help.. thanks. happy new year to all!
me and nesty tried alot..but only got the first menu to work...lets try even harder..Happy new year to all
successfully managed to ZIP files from O2 ZINC to try to copy the STK files from the ZINC and copy to the XDA 2.
with VERY FUNNY RESULTS, look at the attached JPEG file of my screen copy of the ZIP file that i got from the ZINC.
look at the encircled RED, the SIMSEC.DLL, SIMTKIT.DLL, SIMTKUI*.MUI, are all ZERO BYTES because ROM based files CANNOT be copied or overwritten in any device.
I think, and this is per deductive reasoning, these exact same files which we should change, however, these files cannot be copied from another device to another device....because it is ROM based. so if someone can copy these files, pls do and upload.
After watching everybody with problems in adding contacts and programs, i tryed to found what was diferent in my Himalaya (it was working fine in my Hima!).
So i found that when I was trying to make M2D working in Himalaya, i previously installed lots of diferent software, and i did not see what i had diferent from you guys...
BUT KNOW I KNOW!!!!
I had 2 more .cabs in my Hima, they make the diference!!!
FOLLOW THIS STEPS:
See this thread here first:
http://forum.xda-developers.com/showthread.php?t=398173
From there download this update: »[UPDATE 16] September 26, 2008«
Inside the folder "NEEDED FILES" you'll find lots of .cab files
1 - Install "01. OX-ManilaCompatibleSharedDLL.cab"
It will ask to Reboot - Ok reboot!
2 - Install "02. ContactFix.cab"
3 - Download and install this .cab file from here: http://rapidshare.com/files/152207282/Manilla2D-Jack.cab.html
4 - Install "16. Manilla2D_HTC_Patch.CAB"
5 - Soft reset the device... et voila! See now if you can add contacts and programs!
Did not test other functions, but they might need other .cabs in package to run.
NOTES;
I've tryied the M2D version inside the package "15. 2d.Manila.Engine-Beta-0.09.cab"
Works also, but it's more heavy, so Jack version is better.
Also tryed install M2D costumizer with other themes and it's working fine.
HOPE THIS HELP YOU!
Send me your feedback.
(Running on WM6.1 ProEdition CE OS 5.2.21109 (build 21109.2.1.0 NOK) This ROM is very very fast and so far no issues detected)
Thanks to those who uploaded the .cabs first
Hi
Thanks for the links but i think the first file has a problem the it only downloads 11.3 kb and the file size is 11mb correct me if am wrong.
great work thanx....
The links are working... must be something on your pc!
i'll try to find more links....
If you continue with problems about downloading try this link: http://rapidshare.com/files/153782118/Manilla2D-Jack.cab.html
Did not test the cab but might work also ;-)
Esbrugalhose said:
For those who want M2D running on Himalaya...
1 - Download and install this .cab file from here: http://rapidshare.com/files/152207282/Manilla2D-Jack.cab.html
2 - Download and install this patch: http://rapidshare.com/files/147321071/Manilla2D_i760_Patch.CAB.html
After trying everything finally it works!
(Running on WM6.1 ProEdition CE OS 5.2.21109 (build 21109.2.1.0 NOK))
Thanks to those who uploaded the .cabs first
Click to expand...
Click to collapse
Can u hv megaupload lonk pls.?
speed was fine ...i got 45 ...50 kbps...
everythings fine..but i cant add people and programs..can anybody help me?
Contacts and Program tabs not working
abdul.rafay7 said:
speed was fine ...i got 45 ...50 kbps...
everythings fine..but i cant add people and programs..can anybody help me?
Click to expand...
Click to collapse
Same here. Not possible to add contacts or programs to the respective tabs... it looks nice though!
OOT
afr33s said:
Same here. Not possible to add contacts or programs to the respective tabs... it looks nice though!
Click to expand...
Click to collapse
afr33s san„ are u sure use XDA2i/alpine with nokser WM6.1 ? thx....
i've been download the manila2D there is no problem with those link...
hi thanks guys links are ok was my comp. having the same issues no cant add programs or contacts etc.
Downloaded without any problem, Installed- Looks great.
But alas! Same problem- Cannot Add People or Programs. Internet- Launch Browser- not working. Settings- Sounds and Wallpaper no effect.
reefsucks said:
afr33s san„ are u sure use XDA2i/alpine with nokser WM6.1 ? thx....
i've been download the manila2D there is no problem with those link...
Click to expand...
Click to collapse
Good Point! Got some new phones recently and mixed up which was which!
Event the main XDA-developers page says that the XDA IIi may be an Andes or an Alpine!
It is indeed a Himalaya / XDA II!
Whats roms these play to?
I have same problem. With contacts, programs and etc.
After the new instructions in post 1:
*Programs and contacts now work
*Links on Internet tab do not work
*Images on album page work, but do not correctly fit to box....HTC Album only loads briefly and then shuts
*Music tab gives "Cannot play file" error, haven't tested with MP3
EDIT: Installing the Audiomanager removes this error, though I have no MP3s on my phone to test more.
*Cannot add location on Weather page, location list is blank. Probably missing link to .xml list.
I will look into fixes...
Keep it up
Jadel said:
I will look into fixes...
Click to expand...
Click to collapse
Very interesting project. Keep us informed.
UPDATE:
After the new instructions in post 1:
*Programs and contacts now work
*Buttons on Internet tab do not work
*Images on album page work, but do not correctly fit to box....HTC Album only loads briefly and then shuts
FIX: Install HTC AlbumFolder Option.cab after installing the cabs mentioned in post one (and including the AudioManager cab)
*Music tab gives "Cannot play file" error, haven't tested with MP3
FIX: Installing the Audiomanager removes this error, though I have no MP3s on my phone to test more.
*Cannot add location on Weather page, location list is blank. Probably missing link to .xml list.
Fix: Reinstalled all the cabs after hard-reseting phone, all of a sudden it works.
I am still looking into the buttons on the internet tab. I might try installing Opera, or seeing if there is a change in the registry...
Esbrugalhose said:
After watching everybody with problems in adding contacts and programs, i tryed to found what was diferent in my Himalaya (it was working fine in my Hima!).
So i found that when I was trying to make M2D working in Himalaya, i previously installed lots of diferent software, and i did not see what i had diferent from you guys...
BUT KNOW I KNOW!!!!
I had 2 more .cabs in my Hima, they make the diference!!!
FOLLOW THIS STEPS:
See this thread here first:
http://forum.xda-developers.com/showthread.php?t=398173
From there download this update: »[UPDATE 16] September 26, 2008«
Inside the folder "NEEDED FILES" you'll find lots of .cab files
1 - Install "01. OX-ManilaCompatibleSharedDLL.cab"
It will ask to Reboot - Ok reboot!
2 - Install "02. ContactFix.cab"
3 - Download and install this .cab file from here: http://rapidshare.com/files/152207282/Manilla2D-Jack.cab.html
4 - Install "16. Manilla2D_HTC_Patch.CAB"
5 - Soft reset the device... et voila! See now if you can add contacts and programs!
Did not test other functions, but they might need other .cabs in package to run.
NOTES;
I've tryied the M2D version inside the package "15. 2d.Manila.Engine-Beta-0.09.cab"
Works also, but it's more heavy, so Jack version is better.
Also tryed install M2D costumizer with other themes and it's working fine.
HOPE THIS HELP YOU!
Send me your feedback.
(Running on WM6.1 ProEdition CE OS 5.2.21109 (build 21109.2.1.0 NOK) This ROM is very very fast and so far no issues detected)
Thanks to those who uploaded the .cabs first
Click to expand...
Click to collapse
Thanks a lot bro! I've been dying to install M2D in Hima, and you are the only one who has helped me. Your steps are perfect. Highly recommended!
Thank you!!!
Works for me... only installed the first two suggestions
About the Jack cab file, can someone place it on some other site aside from RS?
jack.cab
Hi, the jack.cab link isn't working anymore. it always give me an error. Could you please upload it again? thanks in advance.
I have meny problems with instaling IGO on my Touch 3G, so can someone please help me to instal it manualy STEP BY STEP, and what is the best version of IGO???
THANX
igo on touch 3g
um i had a touch pro before and i could never get my version of igo 8 to work, but then i found this one on pirate bay:
iGo8 v8.0.0.49545 PDA FULL ROMANIA-map (fulgerul release)
it's not in english but u can go into the igo settings and change the language to english. this version worked great on my touch pro and now my touch 3g too.
i can help you if you need. first of all are 2 ways of installation: with autorun (it is installing by himself shortcuts) and without autorun. the second without autorun, you have to make yourself a shortcut if you need. so, let's begin with the beginning . what kit are you using? what error do you have?
igo8 in touch 3g
ady_uaic said:
i can help you if you need. first of all are 2 ways of installation: with autorun (it is installing by himself shortcuts) and without autorun. the second without autorun, you have to make yourself a shortcut if you need. so, let's begin with the beginning . what kit are you using? what error do you have?
Click to expand...
Click to collapse
Hi, i have problem vith IGO8 too in my HTC touch 3G... But, i instaled program, everithing is good and when i want to start my IGO8 it not work, program can not open... i dont know what is the problem.
If you paid for the app then igo will help you.
Seen as though u are using a pirated version xda will not. : http://forum.xda-developers.com/showthread.php?t=290261
Thanks
Dave
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
1st pack (Dialer and deps) http://www.multiupload.com/YQGEDIMWJD
HTCScroll_2_0_19221326_00
Video_Telephony_2_5_35575_0
Shared_Modules_1_01_19221333_00
HTCFramework_1_5_19223320_00
Volume_Control_2_2_20113221_00
Contact_Picker_1_0_20113132_00
HTCFont_Link_1_0_19132133_1
Contact_Utility_Engine_1_2_20113727_00
Concurrence_Mgr_1_5_19221227_00
Resource_Proxy_1_0_19221124_00
SharedResource_1_0_20111720_00
Phone_Canvas_Enhancement_4_2_51720111829_0
New_Contact_Card_1_1_20113729_0
2'nd pack http://www.multiupload.com/1D9Z6NCUJK
Manila_2_1_19193517_0
3'rd pack http://www.multiupload.com/R1BXPVJFQV
Album_3_2_20113921_0
CommManager_2_9_U_0 with 12 functios
INSTALATION INSTRUCTIONS
1.Copy files to windows folder
2.import registry with your preferate reg editor
3.REBOOT AFTER INSTALL
you can also delete panel manager and stop slideview to get sime speed
go...go...go...jer.
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
I've got a X2 fromm vodafone and is unsoportable. We're waiting for your work.
jerpelea said:
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
Click to expand...
Click to collapse
The best news recently!
I have "tasted" the 6.5.2 update of X2 in some phase, I really liked it. I'm sure the 6.5.3 update combined with manila will make X2 to become the most comfortable gadget for my personal needs.
Many thanks for your efforts jerpela!
Great news, highly appreciated!
phone dialer ported
i will upload it tomorow
uploaded manila with split languages
copy only manila and your language to windows folder
inport registry with your favourite reg editor
landscape is enabled
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Giland said:
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Click to expand...
Click to collapse
for any other file than english you need to rename all 409 files to your country code
this will display english mesages !!!
if you want native language you have to translate yourself
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
bazsikar said:
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
Click to expand...
Click to collapse
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
jerpelea said:
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
Click to expand...
Click to collapse
2nd option worked, thanks! Now testing.
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
ndjorovic said:
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
Click to expand...
Click to collapse
Try to install these.
The bkinking still occurs after pushing slide view key once or twice.
I have other issues also but before sharing them maybe I should try patch.reg but it doesn't work.
Error message comes "line 302 - unsupported DirID 1" (HKCR) and line 234 in HKLM.
Besides it's very good feeling to have manila on X2. Now I won't feel to change back to X1 every now and then.
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
marcuchinonis said:
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
Click to expand...
Click to collapse
First I had to uninstall some apps when i tried it before hard reset. I don't know if you use SE User Guide (it's 4-5MB) or pixel city panels.
I am not an expert at all either, only trying to discover registry things, just managed to make the attached 2 cabs of jerpelea's all.reg and manila.reg and manila works after installing them.
I encountered some problems in the People tab.
When I click the All People button Manila restarts, the same thing happened when I click Updates & Events in a contact...
Is there any way to solve this?
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
ndjorovic said:
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
Click to expand...
Click to collapse
you need to copy all packages and install regs
not just 2