[Q] Please help, Odin stuck at sbl.bin - Captivate Q&A, Help & Troubleshooting

Im new at this so bear with me please. OK, so I was using Odin to get back to my stock ROM for my Captivate, and it gets stuck on sbl.bin. What initially happened was that I tried to revert to a backup i made, but it ended up staying on my boot screen for like 20 minutes. So i shut off my phone, and it was still doing the same thing. I tried to use Odin to get it back to stock, but it was then stuck on FILE ANALYSIS... Tried again stuck on DO NOT TURN OFF TARGET...
So i unplugged, tried again on Odin3 1.00. Now that one is stuck on sbl.bin, still not past it. Pretty sure my phone is soft bricked. I can still get into Download Mode and everything, so what im asking is am i screwed or is there a way to fix it and how?
Thanks

I have had this happen before. As long as you can still get into dk mode you are ok.
If it is still stuck, unhook. Pull battery abd leave it out. Power off computer then restart. Open odin, get into dl mode try again
You may have to try a bunch if times
Have you used odin before?
Sent from my SGH-I897 using XDA Premium App

Yes i have. I have gone back to stock a few times already and i flashed Cyanogen mod using it. Thanks for the tip ill try and post again after a few attempts
EDIT: OK i got past it. Thanks a lot mcord. Now that I think about it, I might have forgotten to put the PDA and PIT file in after I restarted Odin the first time. Wow i feel kinda dumb. O well. Thanks a lot

http://forum.xda-developers.com/attachment.php?attachmentid=572821&d=1303242737
here is odin 1.82 it wont lock up
its from the rogers stock rom link in my sig but its odin will work for any flash

Related

[Q] Captivate Boot Loop after Odin one click

Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob
Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7
please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...
I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.
That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob
I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!
went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!
odin doesnt reconize phone
which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.
And make sure you have the correct drivers installed. CRUCIAL.
Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?
^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.
^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium

i9000 bricked, but goes to download mode - rescuable?

So here't the full background, it's not long, please read:
http://www.darkyrom.com/community/i...-bricked-my-sgs-wonder-what-i-did-wrong.2032/
Long story short, it looks like I bricked my SGS when trying to flash with Odin, even though I followed the tutorial very closely. When I power up the phone, it just gives me the image with phone, exclamation mark and PC on it. It does, however, go into download mode when powered up with VolDown and center button.
How do I save it? Do I need the JIG (God, please say no! )
Have you tried reflashing with odin.
Jig is only needed when you cant get into download mode.
Also i just looked inside the darky rom topic.
Have you flashed the jvk rom first with the bootloaders?
Edit: as said below. If you gonna reflash, flash a stock rom. Not the darky rom. First priority is to make your phone work.
Sent from my GT-I9000 using XDA Premium App
Yeah, you have download mode.
Now, fire up Odin and load a few rom files into it, connect the phone and see if the PC still recognises it. (Do not flash, Just a test)
If so...
Flash a stock rom.
Somehow, I was able to flash it with Odin in Download Mode this time. Phew! I read somewhere that the flash might fail if You're using wrong USB port. At first I connected my phone to a eSATA/USB combo port, and for the second time (after brick) I tried a normal USB 2.0 port in my laptop. Maybe that's what made the difference, I have no idea.
Anyway, I'm running stock Samsung 2.3 rom and am trying to install Darky's 10.0 RC3 on it - I am running into some problems, but thankfully they're much less serious than the brick that I was able to fix.
Thanks for Your help!
I ran into similar problems last week. A rom wouldn't flash, so I gave it an hour and it proceeded nowhere. Had to pull the plug on it.
Sometimes it just takes a few times plugging and unplugging repeatedly until it just happens to get detected by Windows. Maybe just a bit of luck too
Congrats on your recovery.
Just wondering which stock 2.3 rom did you use and which Odin setting you used to get your phone up and working again.
Here is my post / problem, seems similar to yours
http://forum.xda-developers.com/showthread.php?t=1020223
Thanks
I had the same issue like warnec on my first darkyy flash, finally everything went fine...don't worry!
just try to reflash with odin (maybe going for a stock version first is a good idea), be sure to do everything as mentioned in the guides out there. and be sure your computer works stable, maybe you want to quit some tasks in the background (however it should work even without but something crashed my odin once...)
Reflash with Odin to make your phone work again. I suggest using a stock 2.2.1/2.3.3 ROM. It is important that it consists of the 512.pit file, a PDA file, a Phone file and a CSC file. The ROM must have bootloaders included!
Now, disconnect your phone and turn it off.
Start Odin and load all the files. Tick 'Repartition'.
Start your phone in Download Mode by pressing Vol-Down, Home and Power.
Connect it to your PC and wait for Odin to say 'Added!'.
Now hit Start, wait 2-3 minutes until it is done and your phone should succesfully reboot!
Sent from my GT-I9000 using XDA Premium App
Thanks I tried this and my phone just keeps flashing i9000m screen, then blank and then back to the i9000m screen. Looks like the phone is unusable.
chriszak said:
Thanks I tried this and my phone just keeps flashing i9000m screen, then blank and then back to the i9000m screen. Looks like the phone is unusable.
Click to expand...
Click to collapse
does not sound very good...could you solve your problem yet?
Had to take the phone into Bell. Waiting on return of it and currently using a loaner HTC Desire Z from Bell.

[q] help - solved

Okay I have tried just about everything and I know that as long as my phone can enter download mode, it isn't bricked but I can't do anything.
Here's what happened, I was running Fasty 2 and then decided to switch to MIUI 1.9.16, so i downloaded the rom and installed it via rom manager. Well when the phone booted backup, I was stuck in a bootloop. It would loud the miui boot animation and then shut off and start again. So I thought okay corrupted install, I'll just flash to stock and try again. Yeah no dice. I got my phone in download mode and proceeded to flash to stock the same way I always do, but this time it froze at cache.rfs, I pulled out the cord and battery and got the compter screen, exclamation mark, robot screen. I tried again, and it got stuck at cache.rfs again. I tried a variety of one-click downloaders, odin flashable roms, running odin as an admin and i don't know what else to do. It either gets stuck at cache.rfs, boot.bin or sbl.bin. I want to master clear and start over but if my phone isn't in download mode it won't turn on. Please help me
Careful if that flash corrups ur bootloaders you are sol. Try another cable. Connect it to the rear of ur pc. If that doesn't work try another computer.
How do I know if my bootloader is corrupted?
Corrupt bl= Dead phone.
I love you. I thought I was out of luck and who would have thought that just using another usb port made the difference. Seriously you're my hero, if I could afford to, id buy you Samsung haha
Glad to hear you where able to work it out.
rkkaranrk said:
Corrupt bl= Dead phone.
Click to expand...
Click to collapse
Not if you have the unbrickable mod like me!
Sent from my I897 using xda premium

True Hard Brick..Repair?

My Captivate had been acting up so I was Trying to Flash with Odin back to Stock GB. Odin failed and now I have the message "Firmware upgrade Failed". I have tried using my Jig to get to Download mode and it won't go so I assume I have "True Hard Brick". The phone is 2 years old and I can get free upgrade in a Month at AT&T and I have an old iphone 3 I can use for now so not a big deal but I was wondering is there a possible way I can try to unbrick a Hard Brick?
Thanks
That message doesn't mean you're hard bricked. If you see anything on the screen, you're not hard bricked.
Try flashing back to stock with Odin again (use that screen as download mode), or use Heimdall if Odin isn't cutting it.
jmtheiss said:
That message doesn't mean you're hard bricked. If you see anything on the screen, you're not hard bricked.
Try flashing back to stock with Odin again (use that screen as download mode), or use Heimdall if Odin isn't cutting it.
Click to expand...
Click to collapse
Thanks. So I should be able to plug into my Computer with this screen showing an Odin "should" see my phone on a COM?
EDIT: Thanks again. When I rebooted my Computer and Opened Odin and plugged in phone it Reflashed Stock
please dont post here....this is dev only isn't it? put it in Q&A...with that many post counts you should know by now
Thread moved
As stated, questions NEVER go in Development.

[Q] Is my GT_i9000 dead?

Hi, I need some advice. I dropped my Galaxy S in a puddle. It was submerged for the just a second, but when I fished it out, the screen had gone 'weird', so I got the battery out as quickly as possible, then dried it out for a few days in the airing cupboard. I then tried it and it started up okay, then when I swiped to unlock the screen, it froze. since then I have been unable to boot the phone. It shows the Galaxy logo, then restarts and continues that loop.
I wondered if maybe the software has just been corrupted during its bath, so I thought i might try flashing a ROM onto it to see if that would recover. I found that I could not enter recovery mode but download mode opened okay. I have tried flashing a few ROMS using Odin. I am completely new to this and have never flashed my phone before, so steep learning curve. I have so far tried - I9000XWJW5 which I believe is normally used before installing Cyanogen mod. I also downloaded the T-Mobile Stock ROM and one with this filename - CF-Root-XX_OXA_JW4-v4.4-CWM3RFS. All of these successfully downloaded to the phone and I could see the progress bar on the phone. Unfortunately I still cannot get the phone into recovery mode.
So, whats your opinion? is my phone screwed? Is there anything else I can try which may help, like formatting or anything like that.
Any help would be very much appreciated.
try search for value pack 2.3.6 and flash it then root it after that I believe you should get the recovery option.
erpurohit said:
try search for value pack 2.3.6 and flash it then root it after that I believe you should get the recovery option.
Click to expand...
Click to collapse
Unfortunately I think that was the file - I9000XWJW5 I had already tried.
did you rooted your phone after flashing
erpurohit said:
did you rooted your phone after flashing
Click to expand...
Click to collapse
Can I do that without being able to get into recovery mode?
I've just been reading that I can use a PIT file to repartition during flashing. Is it worth trying? I noticed in the Value pack TAR file it does not have a PIT file. I got one downloaded from somewhere else called - s1_odin_20100512.pit worth a shot?
I tried including the pit file as well. Odin reported success but phone is still continuous boot loop and I cannot get recovery mode up. Do you think one of those USB things that get you into download mode would help? I'm beginning to think the internal SD is knackered, or something like that.
I think the memory is brocken but i don't realy know. Send it to Samsung for a check
Sent from my GT-I9001 using xda app-developers app
I'll try them, will they still help me after I've tried reinstalling ROM etc?
Yes they will repair it if you pay for
Sent from my GT-I9001 using xda app-developers app

Categories

Resources