Database Develop

Galaxy Tab Flashing Problems :(

Greetings,
I recently got a Galaxy TAB in Malaysia with the DXJJ1 firmware. There were issues connecting to my Exchange server, so I decided to download a new firmware from www.samfirmwares.com. I chose the latest Asia Firmware and downloaded the P1 PIT file - P1_add_hidden.pit.
I have tried using Odin 1.31 and Odin 1.7 both with no success. I always get a failure on the second try with factoryfs.rfs:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the DDJJ5 firmware and the latest ZHJK1 firmware, both don't work - after browsing around I'm thinking this might be a PIT file issue, but I'm not sure... now I can't use my tablet at all. Luckily it doesn't seem bricked, but I need to figure out a way to flash back either the original firmware or preferably a new firmware.
Any help would be most appreciated. Thank you.

Did you also add the modem/phone csc and pda files? You probably need to apply a full firmware then an update.

Hi, I clicked on PHONE/CSC also. Which is a full firmware that I should use? If I just click on "PDA" and update with the .tar file, it will flash but then I get a:
update media, please wait
E:Can't mount /dev/block/stl10
(invalid argument)
etc. error
:S

i dont think its the PIT file considering its the same P1 PIT
different from those EUR JJ4 and JK1 which have different PIT
my 1st logic is only flashing the PDS without repartition, but i never get the chance to do that
mine is also DXJJ1, indonesia here
if anybody manage to get through flashing, please post here, i'm desperately seeking guidance too hehe
when u try only the PDA files, did u tick the repartition?
and the pit files u use, is it the one that came with odin 1.7?

Flash with the JJ4, as it is a full flash. Use ALL the files in it and make sure you select repartition, auto reboot and reset time.
Then if you wish you can flash JK1 over that, without repartition.

ur solution works on eur firmware, r u sure that would works with asian firmware? considering ur method is to get the 1st with PIT.1 which is jj4 meanwhile all asia's firmware already PIT.1 in the 1st place

shollywood said:
Flash with the JJ4, as it is a full flash. Use ALL the files in it and make sure you select repartition, auto reboot and reset time.
Then if you wish you can flash JK1 over that, without repartition.
Click to expand...
Click to collapse
May I know if JJ5 is a full flash as well? If thats is so, I assume you could.flash JJ5 then do JK1?

leekslk said:
May I know if JJ5 is a full flash as well? If thats is so, I assume you could.flash JJ5 then do JK1?
Click to expand...
Click to collapse
You will know if it is a FULL flash as it will contain all parts, Phone, PDA, CSC, and the PIT file. The non Full contain only *.tar file...
To the best of my knowledge JJ4 was the last FULL flash...

Justin^Tan said:
ur solution works on eur firmware, r u sure that would works with asian firmware? considering ur method is to get the 1st with PIT.1 which is jj4 meanwhile all asia's firmware already PIT.1 in the 1st place
Click to expand...
Click to collapse
If that is the case you do not require the full flash....

and there you go, DXJK2 is already out, to the Thread Starter, would you mind trying that one?
considering DX is the code for south east asia anyway, that would be the best suited for us

Just downloaded P1000ZUJJ4 but it does not seem to contain modem/phone csc. all there is after an unzip is a single .tar file which I assume is the pda file.
Is it not possible to update the pda file only and not touch the CSC and modem files?
Sorry if I do not make sense.

it is possible thats what JK5 on eur firmware is for
its only flashing for PDA
u can search on thread how to flash from jj4 to jk5
to my extent, jj4 is the 1st file on eur that has P1 PIT, thats why its full flash
thats why u dont need a full flash again to jk5
if its the same case here, u should try from jj1 to jk5 by just flashing PDA without ticking repartition
i still didnt dare to do it myself though
but looking on samfirmware, all asia firmware is already P1 PIT by default

teeskay said:
Greetings,
I recently got a Galaxy TAB in Malaysia with the DXJJ1 firmware. There were issues connecting to my Exchange server, so I decided to download a new firmware from www.samfirmwares.com. I chose the latest Asia Firmware and downloaded the P1 PIT file - P1_add_hidden.pit.
I have tried using Odin 1.31 and Odin 1.7 both with no success. I always get a failure on the second try with factoryfs.rfs:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the DDJJ5 firmware and the latest ZHJK1 firmware, both don't work - after browsing around I'm thinking this might be a PIT file issue, but I'm not sure... now I can't use my tablet at all. Luckily it doesn't seem bricked, but I need to figure out a way to flash back either the original firmware or preferably a new firmware.
Any help would be most appreciated. Thank you.
Click to expand...
Click to collapse
Have the same problem...

ledyoung said:
Have the same problem...
Click to expand...
Click to collapse
If you can put your tab into download mode, then just flash your stock fw over.
Sent from my GT-P1000 using XDA Premium App

Topic reported.
This is not a development project.

odin "All threads completed. (succeed 0 / failed 1)"

Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.

Hi!
When i got the same result, the solution was simple: put my phone to download mode

remal said:
Hi!
When i got the same result, the solution was simple: put my phone to download mode
Click to expand...
Click to collapse
probably a very stupid question but "Download mode" means to enable the "USB Debuging" or am i totally off?

No, it is by turning your phone off, holding volume down, home and power on until you see a yellow triangle. That is download mode.
Don't try it if you have no idea what you are doing. Also, your download mode may not work which might mean it needs to be fixed.
Sent from my GT-I9000 using XDA App

I think it is better to read first (HOW TO section): http://forum.xda-developers.com/showthread.php?t=723596
That is the point: "Several batches of phones that were sold have the download-mode button combo disabled (VolumeDown+Home+Power or alternatively Home+Power on some phones). Check if the download-mode combo works BEFORE flashing!"

speedin said:
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Click to expand...
Click to collapse
i guess your three button download mode works..what you can do at this point is to download a stock rom...if the rom is only a tar file, place it on the PDA with repartition unchecked and no pit file...after flashing the stock rom, flash the CF Root with unchecked repartition and no pit...place the CF Root tar file on the PDA...that's it...place darky's in your sdcard and flash via CWM

Also make sure no part of Samsung Kies is running (use ctrl alt del and check for it running in the background) as I tried odin after using Kies and had this problem until checking this and rebooting
Sent from my GT-I9000 using XDA App

Thnx for all the responses.
@ jaju123
So that's called download mode, did not know that, ive been there before just did not know that it was called DL Mode
never mind, thnk you, i have now FW 2.2.1...
now the next step is the CF Root and after that i will become darky

always think before you act, is a good thought to take with you from this piont in your quest for the darky !

That is to late.. ive already become darky.though i miss my danish t9 dictionary with samsung/gingerbread keyboard.. The once in the market are not the best.. Is it possible to take out a t9 dictionary from a standard samsung FW and put it in the darky i use now
Sent from my GT-I9000 using XDA App

Same issues
Hi there,
I'm look the solution for this everywhere. I got no idea which one I'm wrong.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have been try around a week. I'm using KH3_modem_s2_+_ODIN\modem.bin. Izzit correct? Plz do help me

hafees89 said:
Hi there,
I'm look the solution for this everywhere. I got no idea which one I'm wrong.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have been try around a week. I'm using KH3_modem_s2_+_ODIN\modem.bin. Izzit correct? Plz do help me
Click to expand...
Click to collapse
had the same issue... in case you are still curious, I got it working by unplugging and replugging the usb cable (with odin running)

speedin said:
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Click to expand...
Click to collapse
Just shutdown your laptop or computer

Triskite said:
had the same issue... in case you are still curious, I got it working by unplugging and replugging the usb cable (with odin running)
Click to expand...
Click to collapse
this worked for me

NONE of these "solutions" worked for me. NOT even unplugging and plugging it back in
Can someone provide a *working* solution?

Arceist Justin said:
NONE of these "solutions" worked for me. NOT even unplugging and plugging it back in
Can someone provide a *working* solution?
Click to expand...
Click to collapse
you should use old version of odin
you use new version of odin?
new version doesnt support

Tuesday, August 18, 2015
I just upgrade my Samsung Galaxy Tab 3V from 4.4.4 Kitkat to 5.0.2 (S6 ROM)
And it says:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well, how can I do this???

I can't flash stock firmware

I need your help guys.
I am able to flash kernels via odin. But whenever I try to flash stock firmware (GB, ICS, or JB) on my GT-N7000, it gets stuck at one point.
P.S I only have access to download mode now. Cannot access recovery. I would really appreciate it if you could help me.
Thanks in advance!

Can you please elaborate your problem? what I see is, you're unable to flash firmware on your note!
Do you have the appropriate and good downloaded firmware? I think you have a bad download, and where does the flashing stop!
Paste me the full ODIN description!

NoteboyTech said:
Can you please elaborate your problem? what I see is, you're unable to flash firmware on your note!
Do you have the appropriate and good downloaded firmware? I think you have a bad download, and where does the flashing stop!
Paste me the full ODIN description!
Click to expand...
Click to collapse
it stops at factoryfs.img. And no, it's a good download firmware. I flashed the firmware successfully before I've experienced this issue
Full odin description
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection
<ID:0/005> Initialization
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
It is stuck right here.

[Q] HELLLP! nonworking screen turned into more serious problem while install 4.4.2!!!

i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3

tqsdyy said:
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
Click to expand...
Click to collapse
I think your screen is deffective..? no other user has reported this issue

Sunderwear said:
I think your screen is deffective..? no other user has reported this issue
Click to expand...
Click to collapse
after many trials, i used boot.tar.md5 for BL and succesfully got back rooted on 4.3, however, i cant make phone calles, text messages are fine though, and hte screen, of course, works great . i rooted 4.3 then i followed your step for rooted 4.3 to 4.4.2 and i succefully installed it and the touch screen is not reponding, not at all, but only with one touch to unlock it, and after unlock, i cant do nothing. and most of the time i cant even unlock it. i am fine with rooted 4.3 or unrooted whatever, i jsut need a phone badly... please help me. when i try to make a phone call, after i pressed "call" nothing happens, the phone froze, yet people im dialing can receive the phone call, just that they cnat hear me.
(im not sure if this is a stupid question , but will there be an ODIN restore for 4.4.2? if yes, how long will it be released? i think the fact i cant make phone calls actually contributed by the wrong bootloader, (or i might be wrong). thanks a lot man, i know you're great! really appreaciate your work on rooting 4.3)

[Q] Root Problem

Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.

maybe this will help
GabrielAK89 said:
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
Click to expand...
Click to collapse
Hi
did you already try to get back to 100% stock ROM??
-
-
i can not yet post links but if you google "galaxy s stock rom" and than the first link.

take a look here for the stock ROMS
http://www.sammobile.com/firmwares/database/GT-I9000/

it warked with another version...strange thow.
Thx.
I will try now to put again the 4.4.x