Database Develop

Galaxy Tab Flashing Problems :(

Greetings,
I recently got a Galaxy TAB in Malaysia with the DXJJ1 firmware. There were issues connecting to my Exchange server, so I decided to download a new firmware from www.samfirmwares.com. I chose the latest Asia Firmware and downloaded the P1 PIT file - P1_add_hidden.pit.
I have tried using Odin 1.31 and Odin 1.7 both with no success. I always get a failure on the second try with factoryfs.rfs:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the DDJJ5 firmware and the latest ZHJK1 firmware, both don't work - after browsing around I'm thinking this might be a PIT file issue, but I'm not sure... now I can't use my tablet at all. Luckily it doesn't seem bricked, but I need to figure out a way to flash back either the original firmware or preferably a new firmware.
Any help would be most appreciated. Thank you.

Did you also add the modem/phone csc and pda files? You probably need to apply a full firmware then an update.

Hi, I clicked on PHONE/CSC also. Which is a full firmware that I should use? If I just click on "PDA" and update with the .tar file, it will flash but then I get a:
update media, please wait
E:Can't mount /dev/block/stl10
(invalid argument)
etc. error
:S

i dont think its the PIT file considering its the same P1 PIT
different from those EUR JJ4 and JK1 which have different PIT
my 1st logic is only flashing the PDS without repartition, but i never get the chance to do that
mine is also DXJJ1, indonesia here
if anybody manage to get through flashing, please post here, i'm desperately seeking guidance too hehe
when u try only the PDA files, did u tick the repartition?
and the pit files u use, is it the one that came with odin 1.7?

Flash with the JJ4, as it is a full flash. Use ALL the files in it and make sure you select repartition, auto reboot and reset time.
Then if you wish you can flash JK1 over that, without repartition.

ur solution works on eur firmware, r u sure that would works with asian firmware? considering ur method is to get the 1st with PIT.1 which is jj4 meanwhile all asia's firmware already PIT.1 in the 1st place

shollywood said:
Flash with the JJ4, as it is a full flash. Use ALL the files in it and make sure you select repartition, auto reboot and reset time.
Then if you wish you can flash JK1 over that, without repartition.
Click to expand...
Click to collapse
May I know if JJ5 is a full flash as well? If thats is so, I assume you could.flash JJ5 then do JK1?

leekslk said:
May I know if JJ5 is a full flash as well? If thats is so, I assume you could.flash JJ5 then do JK1?
Click to expand...
Click to collapse
You will know if it is a FULL flash as it will contain all parts, Phone, PDA, CSC, and the PIT file. The non Full contain only *.tar file...
To the best of my knowledge JJ4 was the last FULL flash...

Justin^Tan said:
ur solution works on eur firmware, r u sure that would works with asian firmware? considering ur method is to get the 1st with PIT.1 which is jj4 meanwhile all asia's firmware already PIT.1 in the 1st place
Click to expand...
Click to collapse
If that is the case you do not require the full flash....

and there you go, DXJK2 is already out, to the Thread Starter, would you mind trying that one?
considering DX is the code for south east asia anyway, that would be the best suited for us

Just downloaded P1000ZUJJ4 but it does not seem to contain modem/phone csc. all there is after an unzip is a single .tar file which I assume is the pda file.
Is it not possible to update the pda file only and not touch the CSC and modem files?
Sorry if I do not make sense.

it is possible thats what JK5 on eur firmware is for
its only flashing for PDA
u can search on thread how to flash from jj4 to jk5
to my extent, jj4 is the 1st file on eur that has P1 PIT, thats why its full flash
thats why u dont need a full flash again to jk5
if its the same case here, u should try from jj1 to jk5 by just flashing PDA without ticking repartition
i still didnt dare to do it myself though
but looking on samfirmware, all asia firmware is already P1 PIT by default

teeskay said:
Greetings,
I recently got a Galaxy TAB in Malaysia with the DXJJ1 firmware. There were issues connecting to my Exchange server, so I decided to download a new firmware from www.samfirmwares.com. I chose the latest Asia Firmware and downloaded the P1 PIT file - P1_add_hidden.pit.
I have tried using Odin 1.31 and Odin 1.7 both with no success. I always get a failure on the second try with factoryfs.rfs:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the DDJJ5 firmware and the latest ZHJK1 firmware, both don't work - after browsing around I'm thinking this might be a PIT file issue, but I'm not sure... now I can't use my tablet at all. Luckily it doesn't seem bricked, but I need to figure out a way to flash back either the original firmware or preferably a new firmware.
Any help would be most appreciated. Thank you.
Click to expand...
Click to collapse
Have the same problem...

ledyoung said:
Have the same problem...
Click to expand...
Click to collapse
If you can put your tab into download mode, then just flash your stock fw over.
Sent from my GT-P1000 using XDA Premium App

Topic reported.
This is not a development project.

[Q] P1010 dead!!! - Can you identify this error??

p1010 dead!!
i tried to flash overcome kernel
there some pit error it said at odin
ahahahahahaha
but i manage to bring it up to life again lol
if anyone heres interested on making rom/kernel
i can be your tester.. ill be the one to take the risk
or can you teach me??
heres the error
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

sorry to hear that
try to flash to the original GTab wifi firmware ...
you can find it here ...
http://www.samfirmware.com/WEBPROTECT-p1010.htm

lol its working again ahahaha i manage it before i posted here
i want to know what is that error all about
thanks by the way

can you teach me how to flash the stock rom for the P1010???
my P1010 DEAD TOO!!!i try to use odin to flash the stock rom which i download from the samfirmware ,BUT , i DONT KNOW HOW TO FLASH IT..I SOLLOW THE GUIDE ON THE WEBSITE FOR P1000,BUT MY P1010 STILL BALCK DISPLAY after i flash it...HOW COME....HELP ME!

The P1010 nd P1000 are completely different (if I understood techno) right so don't follow those guides.
Sent from inside a whale.

Oh my god..then..what can i do..my p1010 cant open...it only stop at a black screen...

wo,i did it!I USE THE ODIN AND THE SAME METHOD TO FLASH BACK THE STOCK ROM!

where can i get a stock rom for the US WIFI version P1010? I messed up my Tab and now can no longer boot in.

This thread may help you flash back to stock.
Flashing Stock Rom

[Q]

Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?

lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it

lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first

zacthespack said:
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it
Click to expand...
Click to collapse
yes odin said it was successfull..
vijai2011 said:
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first
Click to expand...
Click to collapse
yes.. where can i get such an older stock gb rom?

lol4it said:
yes odin said it was successfull..
yes.. where can i get such an older stock gb rom?
Click to expand...
Click to collapse
They in development section.Its a sticky thread.BTW if you dont bother about loosing your sd-card data and about binary counter,flash darkyrom 3.4-RE.Since it repartitions your phone,you must be fine...

i dont care about dat data... backuped everthing..
i just want my phone to work..

lol4it said:
i dont care about dat data... backuped everthing..
i just want my phone to work..
Click to expand...
Click to collapse
Ok thn better flash darkyrom_note 3.4 RE.Its in development section.But it will increase the counter and give yellow triangle for sure...

where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/

lol4it said:
where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/
Click to expand...
Click to collapse
Yeah thats the one...

Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
theres written in blue RESET in odin.. what shall i do?
EDIT:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
ok finished but my screen is still black Oo
EDIT 2:
said nothing.. i love u dude and i dont care about dat triangle..

samsung galaxy S anycall bricked

hello xda developers
my friend came to me with his new galaxy s one phone to install Arabic firmware for him
well i tried home power voice down but it didn't go into download mode
then i tried power + home it went into download mode
after i start flashing using odin with 2.3.3 firmware I9000JPJV6_OJPJV6_JXJV6
odin failed to finish
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
and a message on the phone said invalid bootloader
later i knew that its not a normal galaxy s one
its anycall galaxy s and we don't have that version of galaxy S in my country so that's why i flashed the phone with out noticing that am flashing with normal S firmware
now the phone is completely died it don't go into download mode and no recovery mode nothing the phone is dead
is there any kind of solution for that or the phone need jtag box or smoothing ?
please help me because its the first time to face that kind of problem

lebknight said:
after i start flashing using odin with 2.3.3 firmware I9000JPJV6_OJPJV6_JXJV6
odin failed to finish
now the phone is completely died it don't go into download mode and no recovery mode nothing the phone is dead
is there any kind of solution for that or the phone need jtag box or smoothing ?
please help me because its the first time to face that kind of problem
Click to expand...
Click to collapse
1) All guides and Helpline for this model are in PIT STOP, link below
2) Flashing an SGS firmware on a Anycall SGS , will brick phone but recoverable by using Repair Kit found at PIT STOP
3) But since you say it is dead may be due to lack battery charge while flashing and rebooting (Try MY Android Solution link below for solution)

SM-N920S FRP lock need help

can someone help me, I tried to root my device and I ended up with an FRP lock cant go into recovery, tried to flash the Stock ROM still failed, I tried looking solutions but can't find any hoping for someone more experienced than me for help I'm stuck the with boot loop, also here is the Odin log's,
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3485 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!

zombiemagnet said:
can someone help me, I tried to root my device and I ended up with an FRP lock cant go into recovery, tried to flash the Stock ROM still failed, I tried looking solutions but can't find any hoping for someone more experienced than me for help I'm stuck the with boot loop, also here is the Odin log's,
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3485 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Click to expand...
Click to collapse
Flash a firmware at least equal to the version your device currently running, or newer. It will fail if you downgrade.

Scurzmann said:
Flash a firmware at least equal to the version your device currently running, or newer. It will fail if you downgrade.
Click to expand...
Click to collapse
thank you, I found the right stock firmware for my device

hi, im having the same problem. Where did you get your stock firmware?

theymbunman said:
hi, im having the same problem. Where did you get your stock firmware?
Click to expand...
Click to collapse
do you have the same model as mine?
I found mine at
https://galaxynote5root.com/note-5-stock-firmwares/
hope it helps

zombiemagnet said:
do you have the same model as mine?
Click to expand...
Click to collapse
I'm using N920C. We have exact problem in flashing stock rom using Odin.

theymbunman said:
I'm using N920C. We have exact problem in flashing stock rom using Odin.
Click to expand...
Click to collapse
ahhh, then you need
https://www.theandroidsoul.com/samsung-galaxy-note-5-firmware/
it has all the stock model firmware you can easily find one here

Use smart switch,I had the same problems but after connecting to smart switch it went smoothly