Greetings,
I recently got a Galaxy TAB in Malaysia with the DXJJ1 firmware. There were issues connecting to my Exchange server, so I decided to download a new firmware from www.samfirmwares.com. I chose the latest Asia Firmware and downloaded the P1 PIT file - P1_add_hidden.pit.
I have tried using Odin 1.31 and Odin 1.7 both with no success. I always get a failure on the second try with factoryfs.rfs:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the DDJJ5 firmware and the latest ZHJK1 firmware, both don't work - after browsing around I'm thinking this might be a PIT file issue, but I'm not sure... now I can't use my tablet at all. Luckily it doesn't seem bricked, but I need to figure out a way to flash back either the original firmware or preferably a new firmware.
Any help would be most appreciated. Thank you.
Did you also add the modem/phone csc and pda files? You probably need to apply a full firmware then an update.
Hi, I clicked on PHONE/CSC also. Which is a full firmware that I should use? If I just click on "PDA" and update with the .tar file, it will flash but then I get a:
update media, please wait
E:Can't mount /dev/block/stl10
(invalid argument)
etc. error
:S
i dont think its the PIT file considering its the same P1 PIT
different from those EUR JJ4 and JK1 which have different PIT
my 1st logic is only flashing the PDS without repartition, but i never get the chance to do that
mine is also DXJJ1, indonesia here
if anybody manage to get through flashing, please post here, i'm desperately seeking guidance too hehe
when u try only the PDA files, did u tick the repartition?
and the pit files u use, is it the one that came with odin 1.7?
Flash with the JJ4, as it is a full flash. Use ALL the files in it and make sure you select repartition, auto reboot and reset time.
Then if you wish you can flash JK1 over that, without repartition.
ur solution works on eur firmware, r u sure that would works with asian firmware? considering ur method is to get the 1st with PIT.1 which is jj4 meanwhile all asia's firmware already PIT.1 in the 1st place
shollywood said:
Flash with the JJ4, as it is a full flash. Use ALL the files in it and make sure you select repartition, auto reboot and reset time.
Then if you wish you can flash JK1 over that, without repartition.
Click to expand...
Click to collapse
May I know if JJ5 is a full flash as well? If thats is so, I assume you could.flash JJ5 then do JK1?
leekslk said:
May I know if JJ5 is a full flash as well? If thats is so, I assume you could.flash JJ5 then do JK1?
Click to expand...
Click to collapse
You will know if it is a FULL flash as it will contain all parts, Phone, PDA, CSC, and the PIT file. The non Full contain only *.tar file...
To the best of my knowledge JJ4 was the last FULL flash...
Justin^Tan said:
ur solution works on eur firmware, r u sure that would works with asian firmware? considering ur method is to get the 1st with PIT.1 which is jj4 meanwhile all asia's firmware already PIT.1 in the 1st place
Click to expand...
Click to collapse
If that is the case you do not require the full flash....
and there you go, DXJK2 is already out, to the Thread Starter, would you mind trying that one?
considering DX is the code for south east asia anyway, that would be the best suited for us
Just downloaded P1000ZUJJ4 but it does not seem to contain modem/phone csc. all there is after an unzip is a single .tar file which I assume is the pda file.
Is it not possible to update the pda file only and not touch the CSC and modem files?
Sorry if I do not make sense.
it is possible thats what JK5 on eur firmware is for
its only flashing for PDA
u can search on thread how to flash from jj4 to jk5
to my extent, jj4 is the 1st file on eur that has P1 PIT, thats why its full flash
thats why u dont need a full flash again to jk5
if its the same case here, u should try from jj1 to jk5 by just flashing PDA without ticking repartition
i still didnt dare to do it myself though
but looking on samfirmware, all asia firmware is already P1 PIT by default
teeskay said:
Greetings,
I recently got a Galaxy TAB in Malaysia with the DXJJ1 firmware. There were issues connecting to my Exchange server, so I decided to download a new firmware from www.samfirmwares.com. I chose the latest Asia Firmware and downloaded the P1 PIT file - P1_add_hidden.pit.
I have tried using Odin 1.31 and Odin 1.7 both with no success. I always get a failure on the second try with factoryfs.rfs:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the DDJJ5 firmware and the latest ZHJK1 firmware, both don't work - after browsing around I'm thinking this might be a PIT file issue, but I'm not sure... now I can't use my tablet at all. Luckily it doesn't seem bricked, but I need to figure out a way to flash back either the original firmware or preferably a new firmware.
Any help would be most appreciated. Thank you.
Click to expand...
Click to collapse
Have the same problem...
ledyoung said:
Have the same problem...
Click to expand...
Click to collapse
If you can put your tab into download mode, then just flash your stock fw over.
Sent from my GT-P1000 using XDA Premium App
Topic reported.
This is not a development project.
Related
p1010 dead!!
i tried to flash overcome kernel
there some pit error it said at odin
ahahahahahaha
but i manage to bring it up to life again lol
if anyone heres interested on making rom/kernel
i can be your tester.. ill be the one to take the risk
or can you teach me??
heres the error
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sorry to hear that
try to flash to the original GTab wifi firmware ...
you can find it here ...
http://www.samfirmware.com/WEBPROTECT-p1010.htm
lol its working again ahahaha i manage it before i posted here
i want to know what is that error all about
thanks by the way
can you teach me how to flash the stock rom for the P1010???
my P1010 DEAD TOO!!!i try to use odin to flash the stock rom which i download from the samfirmware ,BUT , i DONT KNOW HOW TO FLASH IT..I SOLLOW THE GUIDE ON THE WEBSITE FOR P1000,BUT MY P1010 STILL BALCK DISPLAY after i flash it...HOW COME....HELP ME!
The P1010 nd P1000 are completely different (if I understood techno) right so don't follow those guides.
Sent from inside a whale.
Oh my god..then..what can i do..my p1010 cant open...it only stop at a black screen...
wo,i did it!I USE THE ODIN AND THE SAME METHOD TO FLASH BACK THE STOCK ROM!
where can i get a stock rom for the US WIFI version P1010? I messed up my Tab and now can no longer boot in.
This thread may help you flash back to stock.
Flashing Stock Rom
hello xda developers
my friend came to me with his new galaxy s one phone to install Arabic firmware for him
well i tried home power voice down but it didn't go into download mode
then i tried power + home it went into download mode
after i start flashing using odin with 2.3.3 firmware I9000JPJV6_OJPJV6_JXJV6
odin failed to finish
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
and a message on the phone said invalid bootloader
later i knew that its not a normal galaxy s one
its anycall galaxy s and we don't have that version of galaxy S in my country so that's why i flashed the phone with out noticing that am flashing with normal S firmware
now the phone is completely died it don't go into download mode and no recovery mode nothing the phone is dead
is there any kind of solution for that or the phone need jtag box or smoothing ?
please help me because its the first time to face that kind of problem
lebknight said:
after i start flashing using odin with 2.3.3 firmware I9000JPJV6_OJPJV6_JXJV6
odin failed to finish
now the phone is completely died it don't go into download mode and no recovery mode nothing the phone is dead
is there any kind of solution for that or the phone need jtag box or smoothing ?
please help me because its the first time to face that kind of problem
Click to expand...
Click to collapse
1) All guides and Helpline for this model are in PIT STOP, link below
2) Flashing an SGS firmware on a Anycall SGS , will brick phone but recoverable by using Repair Kit found at PIT STOP
3) But since you say it is dead may be due to lack battery charge while flashing and rebooting (Try MY Android Solution link below for solution)
I used Odin to repartition using the s1_odin_20100512.pit file. I used the zimage for the T759 file that was provided in another thread but when it boots to recovery it won't mount to anything. These are the errors I get in the attached photo. Any ideas would be better than the ones I've tried.
edit:
from this thread I D/L the exhibit4g-stock-rom-odin file from "tknighten" which contain the files in image 2.
http://forum.xda-developers.com/showthread.php?t=1138524&page=127
I get the following error when trying to flash:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dthevt67 said:
I used Odin to repartition using the s1_odin_20100512.pit file. I used the zimage for the T759 file that was provided in another thread but when it boots to recovery it won't mount to anything. These are the errors I get in the attached photo. Any ideas would be better than the ones I've tried.
edit:
from this thread I D/L the exhibit4g-stock-rom-odin file from "tknighten" which contain the files in image 2.
http://forum.xda-developers.com/showthread.php?t=1138524&page=127
I get the following error when trying to flash:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Why would you use boot image for the t759 on the t679? I'm confused here what phone model do you have.
schuylkillparanormal said:
Why would you use boot image for the t759 on the t679? I'm confused here what phone model do you have.
Click to expand...
Click to collapse
According to the sticker, the phone is a SGH-T759. This screenshot is from before we tried to flash a new rom.
Devil-Dog said:
According to the sticker, the phone is a SGH-T759. screenshot is from before we tried to flash a new rom.
Click to expand...
Click to collapse
I'm surprised it didn't brick the phone the t759 and t679 are two different phones. t679 files wont work for the t759.
Its a little confusing but there's other versions of the Samsung galaxy exhibit.
schuylkillparanormal said:
I'm surprised it didn't brick the phone the t759 and t679 are two different phones. t679 files wont work for the t759.
Its a little confusing but there's other versions of the Samsung galaxy exhibit.
Click to expand...
Click to collapse
So that isn't the file for the t759? I grabbed the exhibit4g-stock-rom-odin from the same thead that "FBIis251" mirrored from area51. When I try to flash, it fails at boot.bin.bin. I get this:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I appreciate your help!
Devil-Dog said:
So that isn't the file for the t759? I grabbed the exhibit4g-stock-rom-odin from the same thead that "FBIis251" mirrored from area51. When I try to flash, it fails at boot.bin.bin. I get this:
I appreciate your help!
Click to expand...
Click to collapse
I don't think anyone in this forum has your phone, so it isn't going to be easy to help you. This is [the forum]for the Galaxy Exhibit 4G T679.
This is the only exhibit forum that comes up when searching in the "type to find your device...." box
Devil-Dog said:
This is the only exhibit forum that comes up when searching in the "type to find your device...." box
Click to expand...
Click to collapse
True but there's different models of this phone t759 t679 t679m t559 Xda only has only the t679 and t679m also t559 in the s3 mini thread.
I got it working
schuylkillparanormal said:
True but there's different models of this phone t759 t679 t679m t559 Xda only has only the t679 and t679m also t559 in the s3 mini thread.
Click to expand...
Click to collapse
I have the correct pit for the SGH-T759 and and the tar file in a 7zip file if someone wants to host it.
Here's what I did:
I extracted the tar into a folder. Using Heimdall-Frontend, I loaded the pit then matched the files in the tar to the add box. I included a screenshot of everything I loaded on it. Phone is working now.
Devil-Dog said:
I have the correct pit for the SGH-T759 and and the tar file in a 7zip file if someone wants to host it.
Here's what I did:
I extracted the tar into a folder. Using Heimdall-Frontend, I loaded the pit then matched the files in the tar to the add box. I included a screenshot of everything I loaded on it. Phone is working now.
Click to expand...
Click to collapse
I NEED THAT ZIP FILE!!! please if you still have it or know where I can find I would appreciate any help immensely! thank you for any consideration
moto32 said:
I NEED THAT ZIP FILE!!! please if you still have it or know where I can find I would appreciate any help immensely! thank you for any consideration
Click to expand...
Click to collapse
I ended up hosting it, the link is here in this thread. http://forum.xda-developers.com/showthread.php?t=2462234
I need your help guys.
I am able to flash kernels via odin. But whenever I try to flash stock firmware (GB, ICS, or JB) on my GT-N7000, it gets stuck at one point.
P.S I only have access to download mode now. Cannot access recovery. I would really appreciate it if you could help me.
Thanks in advance!
Can you please elaborate your problem? what I see is, you're unable to flash firmware on your note!
Do you have the appropriate and good downloaded firmware? I think you have a bad download, and where does the flashing stop!
Paste me the full ODIN description!
NoteboyTech said:
Can you please elaborate your problem? what I see is, you're unable to flash firmware on your note!
Do you have the appropriate and good downloaded firmware? I think you have a bad download, and where does the flashing stop!
Paste me the full ODIN description!
Click to expand...
Click to collapse
it stops at factoryfs.img. And no, it's a good download firmware. I flashed the firmware successfully before I've experienced this issue
Full odin description
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection
<ID:0/005> Initialization
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
It is stuck right here.
I have a Note 5 (SM-N920G) that was carrier locked and running Android 6. I tried upgrading it to version 7 using a firmware download from Sammobile from a different region. That failed in Odin on the system.bin (I think) but when I try to flash the version 6 firmware back to it, that's not working now either (I'm guessing because some bits of the version 7 actually flashed and it's now seeing my attempts as a downgrade, not sure). I can get it into download mode still but normal boot ends up with a white triangle with an exclamation sign and the message "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." I tried Smart Switch and that also failed towards the end. Any suggestions on what else I could try?
Thanks in Advance.
You will need to flash firmware using repartition with pit file. Use this pit file: https://drive.google.com/file/d/0B8NP_y2ZL5IkcXY0NTRhNlQzc3c/view?usp=drivesdk
With this firmware: https://drive.google.com/file/d/0B5vkBxwCY_cCZVIxZmZVQ3JQa1k/view
AntonPres said:
You will need to flash firmware using repartition with pit file. Use this pit file: https://drive.google.com/file/d/0Bzy...ew?usp=sharing
With this firmware: https://drive.google.com/file/d/0B5vkBxwCY_cCZVIxZmZVQ3JQa1k/view
Click to expand...
Click to collapse
I'm getting the Firmware. Based on the filename I actually have it downloaded already. The link to the PIT file is not resolving though. Google says it doesn't exist. Also, will this be a problem since my phone is still carrier locked? I thought I could flash any firmware from any country but after I dug around some more I found out that that only applies to the International version or carrier unlocked devices.
Check link for pit again, I have edited it, it should work even if phone is carrier locked
AntonPres said:
Check link for pit again, I have edited it, it should work even if phone is carrier locked
Click to expand...
Click to collapse
Ok Thanks. So just run Odin as usual, load this PIT file in the PIT tab, load the firmware in AP section and hit Start?
exactly, make sure repartition is ticked, should be automatically selected after adding pit
AntonPres said:
exactly, make sure repartition is ticked, should be automatically selected after adding pit
Click to expand...
Click to collapse
Ok, Thanks. Here goes (Fingers crossed)
Post result after flash is done
AntonPres said:
Post result after flash is done
Click to expand...
Click to collapse
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What region was your phone before?
AntonPres said:
What region was your phone before?
Click to expand...
Click to collapse
JDI
Then I suggest you to download a firmware that is part of this multi csc file and try again same operation
SM-N920G UUB multi CSC ( ARO BVO CHO COO EON PCW TPA
TTT UPO UYO )
NOBLELTE_AUS_XSA.pit
https://drive.google.com/file/d/0BzyeAt2hy6XedERHa29YRFpRTE0/view?usp=sharing
AntonPres said:
Then I suggest you to download a firmware that is part of this multi csc file and try again same operation
SM-N920G UUB multi CSC ( ARO BVO CHO COO EON PCW TPA
TTT UPO UYO )
NOBLELTE_AUS_XSA.pit
https://drive.google.com/file/d/0BzyeAt2hy6XedERHa29YRFpRTE0/view?usp=sharing
Click to expand...
Click to collapse
Ok. Wouldn't happen to have one that matches a 7.0 Firmware for the device? I'm seeing Banglades, Sri Lanka, India and Nepal on SamMobile.
theglobalyst said:
Ok. Wouldn't happen to have one that matches a 7.0 Firmware for the device? I'm seeing Banglades, Sri Lanka, India and Nepal on SamMobile.
Click to expand...
Click to collapse
Found one here;
https://www.sammobile.com/forum/showthread.php?t=30106
ODD one worked with the NPL firmware. Just flashed it. Phone restarting. Got a message about data partition corrupt and needing to reset. Did that and restarting again. Will advise on result once complete.
Thanks again.
theglobalyst said:
Found one here;
https://www.sammobile.com/forum/showthread.php?t=30106
ODD one worked with the NPL firmware. Just flashed it. Phone restarting. Got a message about data partition corrupt and needing to reset. Did that and restarting again. Will advise on result once complete.
Thanks again.
Click to expand...
Click to collapse
Phone is now back from the dead and running Android 7. No issues so far.