Database Develop

Galaxy Tab Flashing Problems :(

Greetings,
I recently got a Galaxy TAB in Malaysia with the DXJJ1 firmware. There were issues connecting to my Exchange server, so I decided to download a new firmware from www.samfirmwares.com. I chose the latest Asia Firmware and downloaded the P1 PIT file - P1_add_hidden.pit.
I have tried using Odin 1.31 and Odin 1.7 both with no success. I always get a failure on the second try with factoryfs.rfs:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the DDJJ5 firmware and the latest ZHJK1 firmware, both don't work - after browsing around I'm thinking this might be a PIT file issue, but I'm not sure... now I can't use my tablet at all. Luckily it doesn't seem bricked, but I need to figure out a way to flash back either the original firmware or preferably a new firmware.
Any help would be most appreciated. Thank you.

Did you also add the modem/phone csc and pda files? You probably need to apply a full firmware then an update.

Hi, I clicked on PHONE/CSC also. Which is a full firmware that I should use? If I just click on "PDA" and update with the .tar file, it will flash but then I get a:
update media, please wait
E:Can't mount /dev/block/stl10
(invalid argument)
etc. error
:S

i dont think its the PIT file considering its the same P1 PIT
different from those EUR JJ4 and JK1 which have different PIT
my 1st logic is only flashing the PDS without repartition, but i never get the chance to do that
mine is also DXJJ1, indonesia here
if anybody manage to get through flashing, please post here, i'm desperately seeking guidance too hehe
when u try only the PDA files, did u tick the repartition?
and the pit files u use, is it the one that came with odin 1.7?

Flash with the JJ4, as it is a full flash. Use ALL the files in it and make sure you select repartition, auto reboot and reset time.
Then if you wish you can flash JK1 over that, without repartition.

ur solution works on eur firmware, r u sure that would works with asian firmware? considering ur method is to get the 1st with PIT.1 which is jj4 meanwhile all asia's firmware already PIT.1 in the 1st place

shollywood said:
Flash with the JJ4, as it is a full flash. Use ALL the files in it and make sure you select repartition, auto reboot and reset time.
Then if you wish you can flash JK1 over that, without repartition.
Click to expand...
Click to collapse
May I know if JJ5 is a full flash as well? If thats is so, I assume you could.flash JJ5 then do JK1?

leekslk said:
May I know if JJ5 is a full flash as well? If thats is so, I assume you could.flash JJ5 then do JK1?
Click to expand...
Click to collapse
You will know if it is a FULL flash as it will contain all parts, Phone, PDA, CSC, and the PIT file. The non Full contain only *.tar file...
To the best of my knowledge JJ4 was the last FULL flash...

Justin^Tan said:
ur solution works on eur firmware, r u sure that would works with asian firmware? considering ur method is to get the 1st with PIT.1 which is jj4 meanwhile all asia's firmware already PIT.1 in the 1st place
Click to expand...
Click to collapse
If that is the case you do not require the full flash....

and there you go, DXJK2 is already out, to the Thread Starter, would you mind trying that one?
considering DX is the code for south east asia anyway, that would be the best suited for us

Just downloaded P1000ZUJJ4 but it does not seem to contain modem/phone csc. all there is after an unzip is a single .tar file which I assume is the pda file.
Is it not possible to update the pda file only and not touch the CSC and modem files?
Sorry if I do not make sense.

it is possible thats what JK5 on eur firmware is for
its only flashing for PDA
u can search on thread how to flash from jj4 to jk5
to my extent, jj4 is the 1st file on eur that has P1 PIT, thats why its full flash
thats why u dont need a full flash again to jk5
if its the same case here, u should try from jj1 to jk5 by just flashing PDA without ticking repartition
i still didnt dare to do it myself though
but looking on samfirmware, all asia firmware is already P1 PIT by default

teeskay said:
Greetings,
I recently got a Galaxy TAB in Malaysia with the DXJJ1 firmware. There were issues connecting to my Exchange server, so I decided to download a new firmware from www.samfirmwares.com. I chose the latest Asia Firmware and downloaded the P1 PIT file - P1_add_hidden.pit.
I have tried using Odin 1.31 and Odin 1.7 both with no success. I always get a failure on the second try with factoryfs.rfs:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the DDJJ5 firmware and the latest ZHJK1 firmware, both don't work - after browsing around I'm thinking this might be a PIT file issue, but I'm not sure... now I can't use my tablet at all. Luckily it doesn't seem bricked, but I need to figure out a way to flash back either the original firmware or preferably a new firmware.
Any help would be most appreciated. Thank you.
Click to expand...
Click to collapse
Have the same problem...

ledyoung said:
Have the same problem...
Click to expand...
Click to collapse
If you can put your tab into download mode, then just flash your stock fw over.
Sent from my GT-P1000 using XDA Premium App

Topic reported.
This is not a development project.

[Q] I9305 doesn't boot, Odin fails at flashing boot.img

Galaxy SIII I9305 shows up with not booting, getting stuck at the SIII logo.
Does the same when trying to get into recovery, so I tried to flash it with Odin.
Flash screen says:
Odin Mode
Product Name: GT-I9305
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Knox Warranty Void: 0
RP SWREV: A2
Click to expand...
Click to collapse
I tried to flash it with the latest packages from Sammobile, but no matter what I try, Odin always fails right away when flashing boot.img... any idea what the problem might be, or what I'm doing wrong?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXUENE4_I9305H3GENE1_I9305NEUEML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse

Centrumgsm said:
Galaxy SIII I9305 shows up with not booting, getting stuck at the SIII logo.
Does the same when trying to get into recovery, so I tried to flash it with Odin.
Flash screen says:
I tried to flash it with the latest packages from Sammobile, but no matter what I try, Odin always fails right away when flashing boot.img... any idea what the problem might be, or what I'm doing wrong?
Click to expand...
Click to collapse
stupid question, but did you go in to download mode when flashing? thats by pressing menu button + volume down button + power button. then press volume up to agree with download mode and then flash with odin. And make sure you have all drivers installed

klemen241 said:
stupid question, but did you go in to download mode when flashing? thats by pressing menu button + volume down button + power button. then press volume up to agree with download mode and then flash with odin. And make sure you have all drivers installed
Click to expand...
Click to collapse
I did. As far as I can tell, I did everything according to the guides.
[edit] I also managed to flash a different I9305 without problem, so I'm sure it's not driver or flash file related. There is something with this specific phone that prevents flashing.
I've seen a "rescue firmware" for the I9300 with separate PDA, MODEM and CSC (+.pit) files for when the regular stock firmware wouldn't flash, and I was wondering if such a thing exists for the I9305 or if there is a guide on how I could make one.

Try to get a PIT file for the i9305 and add it to ODIN. If you don't do this, ODIN extracts the PIT from the device, and that might be corrupted.

daedric said:
Try to get a PIT file for the i9305 and add it to ODIN. If you don't do this, ODIN extracts the PIT from the device, and that might be corrupted.
Click to expand...
Click to collapse
Can't brick the device much more than it already is, right? I tried it, but it just gets stuck here:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Click to expand...
Click to collapse
I got bored after 15 minutes, turned off the target, turned on the target, no change, still the same error when flashing.
Thought about the Knox bootloader preventing me from updating it, but that usually gives me some kind of error message right on the flash screen. Plus I'm using the latest images, and the other I9305 also says "SWREV A2", so that shouldn't be a problem.
This looks more and more like a motherboard replacement...

All i have to say is, good luck. Things don't look good.
Try to flash just a recovery via ODIN. You'll kiss knox goodbye, but we're out of options.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9305/

daedric said:
Try to flash just a recovery via ODIN. You'll kiss knox goodbye, but we're out of options.
Click to expand...
Click to collapse
Tried it, no go. Same error, still won't boot into recovery. On the upside, it didn't trip Knox either

Ok, just for good measure, let's get down to the basics.
Questions:
1. What type of USB cable are you using? Can you try another?
2. Is the USB cable connected directly to the computer , or via HUB / Front ports ?
3. Have you tried cleaning the usb port on the device ?

I've covered all the basics, even tried another computer. Same results.
I couldn't find a solution, ended up sending the phone for a motherboard replacement. Thanks for the suggestions, everyone!

[STOCK][Odin] OFFICIAL T713 STOCK FIRMWARE T713XAR1APD9

Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here

Hello everybody!
Sorry if this si not fine for me to post in this thread, but I think my question is quite related, in case I apologize in advance.
I recently bought a Galaxy tab S2 8" (SM-T719).
I installed the TWRP and applied SuperSU (as per guide: http://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627)
All fine...
Only later I recall that I stupidly forgot to make a complete STOCK backup. If I need, can I use the STOCK provided in this thread even if it is for T713?
The only difference I see comparing the specs is the additional 2G support.
Thank you in advance and thanks to everybody for the great work!
PS: if it can be usefull to anybody I can make a BACKUP of the current state of the tablet.
Best regards!!

DeeXii said:
Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Click to expand...
Click to collapse
Can we use the firmware for T813 as well?
Or do you know a source where to get that firmware?

Thanks...about to Root and went to SamMobile and another Samsung site to get Stock in case of any problems Rooting....But Its NOWHERE to be found!!! A quick Google search led me here to trusted XDA!!! Thanks Bro!!

I cant believe there is no development for this 713 Tab! I have bought or tried everything Samsung and this is a a great tablet...I had the Tab S 32GB and sold it...never found another..and Note Edge also that had nooo development as well...I guess I get the things that are not popular..2014 Note 10.1 and Note Pro 12.2 there are NO Roms on those either! My Note 5 is the only thing I get to flash...But thanks again...I needed this
Sent from my SM-T713 using XDA-Developers mobile app

DionWhite33 said:
I cant believe there is no development for this 713 Tab!
Click to expand...
Click to collapse
This will change when I get my hands on one Friday

I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Bhups said:
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Factory reset

Lightn1ng said:
Factory reset
Click to expand...
Click to collapse
Thanks!!!
Factory rest worked great!!

Bhups said:
Thanks!!!
Factory rest worked great!!
Click to expand...
Click to collapse
Awesome!

Lightn1ng said:
This will change when I get my hands on one Friday
Click to expand...
Click to collapse
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app

DionWhite33 said:
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
Click to expand...
Click to collapse
Lightning ROM... Its in the dev forums...

There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.

dxxvi said:
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
Click to expand...
Click to collapse
I've hosted the file on a separate mirror on Mega: https://mega.nz/#!uZ0S2LKJ!cv9_833R1kUVndRl4lpIM_UV51WiCtbVrWAd9S3m2TQ. No file changes, just a download/rehost.

Image restore via Odin fails with blue caution triangle screen
I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine.
After numerous attempts to get around the pin issue, I attempted to flash this stock firmware via Odin. Every attempt failed at a different point. MD5 double checked and matched. The latest attempt ran as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> adspso.bin
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am stuck at the blue screen saying that An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software. That software reports that my device is not supported. The other thing on the screen is a message that SU REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I also cannot turn off the screen.
I have been rooting and running numerous ROMS on phones and tablets for 6 years. Any hope left?

stock firmware
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp

dirtymikeandtheboyz said:
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
Click to expand...
Click to collapse
Use the one linked in the OP.
Before you odin twrp or anything else let the tablet update to the latest firmware.

Success after loading the new updated Samsung firmware from link in post by dxxvi.
"I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine."
Finally had success after loading the new updated Samsung firmware from link in post by dxxvi (took almost 20 hours slow load). Confirmed that it does require a factory reboot after hanging at Samsung logo.
The new firmware allows you to choose whether to require a pin after reboot or just accept fingerprint input.

There is a newer version of of the firmware T713XXU2APJ1, release date 05.10.2016

HELPP
Model - sm-t713nzkexar
had a issue with wifi not working when flashing custom rom, long story short... i wanted to go back stock firmware and is the T713XAR1APD9 not the stock firmware for my device?? i tried to flash and it failed, and for some reason i cant attach the screenshot of the log in odin, but after failure while still in "download mode", at the top of screeen tablet says,
"SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"

S3 Mini Official ROM Fail Error

Hi there, I'm trying to flash my Galaxy S3 mini GT-I18190 with an official ROM which was downloaded from SAMMOBILE. My phone isn't carrier locked or anything like that. I have installed the drivers necessary and I'm using the original USB Cable. The Error I'm getting is as follows:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190XXAMC1_I8190OJVAMC3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.img
<ID:0/015> NAND Write Start!!
<ID:0/015> recovery.img
<ID:0/015> STE_boot1.img
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<ID:0/015> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
On my device screen it says: "CUSTOM STEboot1 BINARY !!
What can I do to solve my issue?
ROM: I8190XXAMC1_I8190OJVAMC3_HOME.tar.md5
ODIN: I tried Odin3_v3.04, Odin_v3.09, Odin3_v3.11.1
Thanks in advanced.

bump

Hello,
I faced this problem last night when trying to flash an official S3 rom via Odin, I used Samsmobile to download the firmware. I kept getting the same error as you with the dreadful red 'FAIL' notification. However, I managed to overcome this issue by using Odin v 3.10 with the right firmware (stupidly, I had downloaded the firmware for the wrong variant, the i8190 as opposed to the i8190n). Furthermore, I also flashed the appropriate PIT file to my device along with the firmware (the only reason I did this was because it was mentioned as a possible solution in many threads). Also, I made sure there was no trace of Kies on my computer before connecting my device and flashing.

Pinda007 said:
Hello,
I faced this problem last night when trying to flash an official S3 rom via Odin, I used Samsmobile to download the firmware. I kept getting the same error as you with the dreadful red 'FAIL' notification. However, I managed to overcome this issue by using Odin v 3.10 with the right firmware (stupidly, I had downloaded the firmware for the wrong variant, the i8190 as opposed to the i8190n). Furthermore, I also flashed the appropriate PIT file to my device along with the firmware (the only reason I did this was because it was mentioned as a possible solution in many threads). Also, I made sure there was no trace of Kies on my computer before connecting my device and flashing.
Click to expand...
Click to collapse
Hi there, If you don't mind can you please send me links to the files you used (the firmware and the PIT file)?

1337x said:
Hi there, If you don't mind can you please send me links to the files you used (the firmware and the PIT file)?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/GT-I8190N/EVR/
That's where I downloaded the firmware, the first one (I8190NXXAMB1). Note that it's for the N variant in my country (UK) and my network provider (EE), I downloaded the PIT file off XDA on a thread I found, I cannot for the life of me remember where it is now. However, it's on my computer at home, so if possible, I'll upload it to this thread when I get back. Keep me updated on how you get on pal.

Help restoring to stock | Odin wont work

Hello! So Im selling my tab s2 but I need it to be returned to stock to do so. Only part is odin fails on EVERY firmware I put through it and smart switch and Kies try to update but dont recognize while in bootloader mode. Below is the error Im getting. Ive tried pulling the PIT and flashing but no luck. Ive tried changing the port on my pc too but no luck.
Im on a T710 with a 5.1.1 rom installed. Any help would be much apreciated!
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the tablet I get "check fail device 2 binary 1" in red below everything in the top right.

I think that means you're flashing firmware that is below bootloader version. I had it happen. There is a 1B and 2B for bootloader version like on here
https://samsung-firmware.org/model/SM-T810/region/XAR/
I went in stupid mode and got it to flash ignoring that error and it darn near didn't boot at all. Nothing worked for me even 2B versions until I flash a good backup in recovery then odin went fine without that red error.

You're flashing the wrong firmware. You're trying to flash a revision 1 firmware on a device running revision 2 firmware.
You need an XXU2 firmware.

ashyx said:
You're flashing the wrong firmware. You're trying to flash a revision 1 firmware on a device running revision 2 firmware.
You need an XXU2 firmware.
Click to expand...
Click to collapse
Thanks! Im downloading T710XXU2CPH1 6.0.1 from sammobile but its downloading at 300 kb/s :crying: should I do this or flash the 5.1.1 revision 2 for anyone who wants root?

Sugardaddy_duncan said:
Thanks! Im downloading T710XXU2CPH1 6.0.1 from sammobile but its downloading at 300 kb/s :crying: should I do this or flash the 5.1.1 revision 2 for anyone who wants root?
Click to expand...
Click to collapse
Download it from UPDATO

ashyx said:
Download it from UPDATO
Click to expand...
Click to collapse
I cant thank you enough! Please tell me where you live so I can come hug you!

Sugardaddy_duncan said:
I cant thank you enough! Please tell me where you live so I can come hug you!
Click to expand...
Click to collapse
If you were female maybe lol. [emoji12]