Database Develop

[Q] Bell Vibrant, black screen, no recovery

I've read several topics but i couldn't find the right answer. I hope you can help me.
The problem i have happened without me doing anything recent. I have never flashed any rom, and i rooted my phone for titanium backup like 2 month ago and it worked fine.The last things i did was to install pocket legend, the new mmorpg like 3 days ago.I charge my phone during night, and take it for the day in the morning. Today, the screen stayed black when i picked it up. When i reboot, the screen goes black after the samsung logo.
The problem is that i have recovery mode (the 3 buttons) disabled and when i try to connect to kies it says i am not in samsungs kies mode.. Is there a way to force it to detect my phone so i can try update it?
According to the wiki, my phone doesnt seem to be bricked as i can still see the battery charging when i plug it. Is my phone bricked? Any hope?
I know the easiest way would be to return it to the store, but i dont want them to see my personal information/rooting as i cant even factory reset it.
There is also that topic on internal sd that has failed but i think this is not my case. You can still boot into android without the internal sd right?
I've seen a topic on soldering two mini usb cable to force the phone to go into recovery mode. I not familar enough to do it. If this method could solve my problem, could anyone sell me one?
Was there an over the air update today that could've done this to my phone?
I am lost, please help i am really clueless in what is happening to me.

are you able to go to download mode
flash your phone that way with odin i had the same problem as you

download mode as in using the 3 buttons? no i cant unless there is another way?

I can't get odin to recognize my phone.. I can't get into os so no usb debugging...

read this
http://forum.xda-developers.com/showthread.php?t=819551
then it'll help you flash back to whatever you want

Okay, I know the jig will DEFINITELY work in this case. Any phone state I've come across with that jig, I can throw the phone into downloading. However, it seems that there MAY be hope for you PRIOR to using the jig. Are you familiar with the ADB commands? If so, turn on the phone, connect via USB, run cmd as administrator, navigate to the proper adb folder and under the prompt type in adb devices. If it shows any device, type in adb reboot download and it'll throw it into download mode for you.

AllGamer said:
read this
http://forum.xda-developers.com/showthread.php?t=819551
then it'll help you flash back to whatever you want
Click to expand...
Click to collapse
I think the JIG is my last resort but i dont have any solder skill
If you know anyone that could sell me one i would be very happy!
krazykidd said:
Okay, I know the jig will DEFINITELY work in this case. Any phone state I've come across with that jig, I can throw the phone into downloading. However, it seems that there MAY be hope for you PRIOR to using the jig. Are you familiar with the ADB commands? If so, turn on the phone, connect via USB, run cmd as administrator, navigate to the proper adb folder and under the prompt type in adb devices. If it shows any device, type in adb reboot download and it'll throw it into download mode for you.
Click to expand...
Click to collapse
Good to hear that the JIG would work. As for ADB commands, doesn't it need the usb to be put in debugger mode? Is there any way to do it externally, without going in the setting menu? I am not very familiar with the adb commands but if its doable i will go read about it.
Thanks for suggestions!

slay3r85 said:
As for ADB commands, doesn't it need the usb to be put in debugger mode? Is there any way to do it externally, without going in the setting menu? I am not very familiar with the adb commands but if its doable i will go read about it.
Click to expand...
Click to collapse
exactly... it's not possible via ADB in your conditions

Thanks you for help!
I still tried but it said that it couldn't find my phone.
I leaning toward making a JIG. I just have to figures out how if no one sell them

Did you really tryed Download Mode?
"Vol Down" + "Home" + "Power" instead of "Vol Up" + "Home" + "Power"?

I tried several time different combo listed on wiki without any success. About 3h long!
I bought my phone the first day it came out so i guess the hardware method is locked.
As soon as i can get it back running i will apply that new fix for the combo.
I am a bit worried about the homemade JIG, will it still work without usb debugging?

Where in the world are you?
If you are in the GTA area, then you can invite me for a coffe

slay3r85 said:
I tried several time different combo listed on wiki without any success. About 3h long!
I bought my phone the first day it came out so i guess the hardware method is locked.
As soon as i can get it back running i will apply that new fix for the combo.
I am a bit worried about the homemade JIG, will it still work without usb debugging?
Click to expand...
Click to collapse
Yes. It will. As long as the phones off and the jig is in when you turn it on
Sent from my SGH-T959 using XDA

AllGamer said:
Where in the world are you?
If you are in the GTA area, then you can invite me for a coffe
Click to expand...
Click to collapse
I wish i could but i live too far Quebec / Laurentides. I think its about 8h driving!
krazykidd said:
Yes. It will. As long as the phones off and the jig is in when you turn it on
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Thanks you for confirming this! I ordered the components and i will try to do it myself.
Some people have done it without any solder skill ! I hope it get here fast! I didn't know i would miss my phone so much!

Seriously! ??? I just soft bricked my phone I really don't know why these software and hardware companies can't get this right the first time. I was going to by an iphone until a sales rep showed me the galaxy s and I was impressed until I saw the black screen of death. A whole lot of B.S. to fix something that should work right in the first place. I'm getting tired of faulty equipment.
My Galaxy is still under warrenty I'll bring it back to store but I'm fed up with worthless technology.

black screen help plz
hey guys i have a galaxy s vibrant which will turn on nd the home nd back nd other buttes will turn on but my screen wont any idea what it might be ?

[Q] another bricked captivate

i just went thru a problem with a broken power button. long story short i claimed my warranty and got a refurb. the refurb had 2.2 on it. like a jerk i thought it would be fine to use this guide ( https://docs.google.com/document/pub?id=1ItSONRa9nzI7MKeKqwIdHCTRA3RRiOM_6LcJGnK4p6Y ) just like i did with my previous phone to get miui back on my phone. i had to downgrade to 2.1 on my old phone but for some reason i thought it would be fine to use the 'safe froyo base' with my already froyo phone...
anyways i got as far as odin saying it was setting partition and it would go any further. no option but to unplug and try again. before trying i tried to boot and take a look at kies. the phone wouldnt boot. just a black screen. so.. i went ahead and tried odin again since i could still get into download mode. it still hung at the same spot. pulled the plug again and put it into download mode and got the great idea of using 1-click to go back to 2.1 stock. then it hung after, i think the 3rd message that it spits out in the log. cant remember what it said but it was a normal msg. so i pulled the plug and tried to put it into download mode again. NO LUCK. and still doesnt boot.
SO, i have a non-booting, non-download mode, non-recovery mode, no signs of life captivate...
is it a refurbished turd or is there hope with a jig or something else?
i know, long story short

those instructions were for i9000 not captivate...
odin sometimes gets stuck on set partition and i wipes the params.lfs partition where the download mode image is stored.
ill bet you 100 bucks if you restart odin. take out your battery, put back in, hold both volume buttons and plug in usb, THE SCREEN WILL NOT come on, BUT odin WILL turn YELLOW in the first box and windows will beep that it found the device.
Odin will flash with a black screen. when the flash starts, you will see a blue bar on the black screen.
use the one click stock roms in the XDA CAPTIVATE development section.
use XDA. period.

so you're saying use the same method again? or use an odin 1-click stock. 2.1, 2.2, or does it even matter? cuz im pretty sure in my rage of panic i tried both one click and full another time and nothing happened. ive got nothing to lose by trying again tho. thanks for the reply.
edit: just tried what you said with the one click i have and no go. ran odin as administrator. dont have time til after work for the full method or a different one click. but i will definatley try.

FYI, regarding your question about a jig, I just had a similar problem (thread http://forum.xda-developers.com/showthread.php?p=19581785#post19581785 I tried every option on this board and many others to get into download mode without success. The jig worked (thankfully!). might be worth trying it before giving up. as for me, no more flashing until I get Outler's Unbrickable Mod.

befreewv said:
FYI, regarding your question about a jig, I just had a similar problem (thread http://forum.xda-developers.com/showthread.php?p=19581785#post19581785 I tried every option on this board and many others to get into download mode without success. The jig worked (thankfully!). might be worth trying it before giving up. as for me, no more flashing until I get Outler's Unbrickable Mod.
Click to expand...
Click to collapse
thanks for the reply. im gonna give it a few more tries before attempting the jig. my power has been out for the last 11 hours so i havent been able to use my pc... or anything really. lost all my food in refrigerator and freezer too .
im gonna mess with this thing a bit more to see if i can make a pearl out of swine poop.

maybe someone can answer me this:
considering what i did to get the phone into this state, if i try to exchange it and tell at&t that i just powered off and it simpy wouldnt power back on is there any way for them tell if it was because of what i did?

anyone? still searching and trying to get dl mode or at least my pc/odin to recognize the device. nothing has worked yet. im downloading sdk now to try adb. i have a feeling that if adb doesnt work then AdamOutler will be $30 richer . and i have an even bigger feeling that adb will not work.

nawlage, PM sent.

4-2ndtwin said:
nawlage, PM sent.
Click to expand...
Click to collapse
thanks, just read it. the thing is, the phone has no signs of life. pbl or sbl seems to be borked but not possitive. ive heard that what i did shouldnt brick it like it has been bricked.
just tried using adb. couldnt even get to it after downloading sdk. there was a read me where adb normally is and said it was moved in the version i have. i tried to install it and it just said nothing was done. could create the directory. i gotta go to work now so i cant try anything else til i get home.

looks like im gonna try for another warranty claim on the grounds that i was putting my saved data from my old phone onto my replacement with kies when the power went out and my phone froze. pulled battery and wouldnt turn back on. if im denied then ill prolly pay for the unbrickable mod. might get the mod even if i get the warranty refurb. seems like a good investment. ill post the results. thanks to those who gave ideas.
EDIT 11/25: i ended up telling them that it worked fine when i went to bed and woke up 4 hours later and it was off and wouldnt turn on. the rep tried all the things i already tried while i snickered to myself and he said 'yeah its dead'. i got another refurb stock uckb2.

[Q] [i9001] Bricked, HELP!

Ok, so I tried to port ICS, dumb idea, so now I can't access it, not even download mode, the same for recovery.
Can someone help me?
I haven't tested Usb Jig, I don't know if it will work, and don't have the parts now, RS far away
Waiting answers ^.^

Well if you can't access DL-mode, try to take out your battery for 5 minutes, start up ODIN with a full stock ROM, insert your Battery, then USB and then press the 3-key-combo: Volume Down + Home + Power. If this does not help - congrats. Go to Samsung and either play dumb ("trying to update firmware with kies bricked it") or tell them the truth and pay for it.
Oh and by the way: there is already a ICS port, CM9 by arco.

wintel_mac said:
Well if you can't access DL-mode, try to take out your battery for 5 minutes, start up ODIN with a full stock ROM, insert your Battery, then USB and then press the 3-key-combo: Volume Down + Home + Power. If this does not help - congrats. Go to Samsung and either play dumb ("trying to update firmware with kies bricked it") or tell them the truth and pay for it.
Oh and by the way: there is already a ICS port, CM9 by arco.
Click to expand...
Click to collapse
Ok, I guess I will go to Samsung and play dumb
BTW, how much will I have to pay for the truth?
And what's with JIG, will it work?

JIG forces the phone to DL-mode. If you did - however - wipe away all the stuff that DL-mode needs from the file system to boot... then this will not work either. You could search for a small phone repair company that has some 9001 compatible JTAG device, they could also fix it (they use this kind of stuff). Costs should be ~40€ at such shops. If you are lucky, then Samsung would change your phone for free (Tell them you connected the phone to kies to sync some music and then there was a message about firmware update and then it crashed and you phone does not work anymore blablabla ). Maybe it's worth a try?

I guess it will still work with the provider, like Bite, Tele2 and **** like that.
Still need to wait till next week, just out from hospital

Fanamon said:
Still need to wait till next week, just out from hospital
Click to expand...
Click to collapse
Get well soon, then.

Go to mobile tech videos. Com they have a method of reviving hard bricked phones its like 50$ but it works search them on YouTube
http://www.youtube.com/watch?v=zN7le4GmxZs
Sent from my SAMSUNG-SGH-T989 using XDA

Nope
Derp, nope, ain't gonna send outside Latvia -.-
And to do it at home, I will burn him

[Q] Cannot get phone to boot

Hi guys,
I recently used rom manager and flashed the wrong clock work mod to my phone, more or less trying to get cm7/9 on my galaxy s captivate, now my phone does not get past the 'Samsung SGH I896' Screen, hard reset does nothing, tried all the key combinations, I work in technical support for all types of phones, and yet I don't know what really can be done with this. I suppose I may be sol. Any input would be appriciated thanks guys.

Try to get your phone into download mode by:
Breathe
Taking out battery
Plug phone into computer
Hold down vol+ and vol-
Insert battery
If it goes into download mode then flash back to stock and stop using Rom Manager. It has nothing for our phones. You can find one-clicks back to stock in this thread
If you can't get it into Download mode that way, you'll want to build/buy a jig.

Thanks for the input, Ill try that out.

If you can't get into download mode, buy yourself a jig to force download mode. works like a charm and they're only about 5 usd

Well then, I've got it into download mode now im just like durr, I have no idea how to get the software on there through kies, I watched that video and im not afraid to admit im a noob at this stuff, my carrier is rogers in canada how do I get the software back on this phone. The one click's aforementioned are for american i897's and I don't think they'd have the proper carrier settings on them.
Excellent, after perving the forums a bit I found a one click fix for the phone and now its fired up and alive again thanks guys <3

You're in luck my beaver-lovin friend.
Another Canuck on the board made some One-clicks to fix problems like yours.
http://forum.xda-developers.com/showthread.php?t=979133

Yeah I noticed those, I work for Rogers WCTS at there corporate centre so these experiences are definitely beneficial. Atleast now I know how to force this phone into download mode, I bet ill save a 100 phones at my job doing stuff like this now xD

C9
Well. You could also try using Odin to flash it? Have you looked into that?

[Q] I messed up. Can get into download mode that's all..

I hope someone can help me here, I'm posting with the belief that this may be a simple enough problem (With the hope).
I tried to install a Custom Recovery on my Galaxy S using this tutorial - wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
I managed to get to step 6, and a blue bar appeared, but then i could not do step 7.
Now i cannot boot into recovery mode, nor will the phone boot past the Samsung Galaxy S logo.
I can still get into download mode, but Odin does not detect the phone.
. I have changed cable and tried different versions of Odin..
When i turn on the phone normally it shows the Samsung Galaxy S logo, blinks, and then reboots and does the same.
When i try to enter recovery, i get the same, unless i connect it to the PC. I then get an 8 pointed star, like the loading flash circle thing - the same as a flash video loading except it does not move.
I have also removed the battery and tried to enter recovery and download mode while inserting the battery.
I have removed the SIM and battery for a few minutes.
when i try to start Zadig, with the phone connected in Download mode, i get "Gadget Serial" as the device connected. I used to get "Samsung USB Composite Device"
I have tried many different things and read over the recommended threads on this forum. I think i need a bit more pointing in the right direction.
I really hope somebody can help me. I am very worried that i may have bricked it.
Thank you.

Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975

akash6969 said:
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
Click to expand...
Click to collapse
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.

Tomato_Jam said:
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Click to expand...
Click to collapse
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!

sorry to ask some stupid question, but can u make sure what versiom ur fone is?
is it i9000?, or i9001 or i9003? or korean anycall? as far as i know, flashing i9000 ROM to i9003 will hardbrick da device.
Sent from my GT-I9000 using xda premium

akash6969 said:
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
Click to expand...
Click to collapse
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.

Tomato_Jam said:
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Click to expand...
Click to collapse
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD

You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1

Soryuu said:
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
huskyT said:
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Click to expand...
Click to collapse
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
 @Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).

Tomato_Jam said:
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Click to expand...
Click to collapse
Don't stress mate, we all have bad days, we all make mistakes
Sent from my GT-P7510 using Tapatalk HD

Well....
I would have been quicker if i had ordered a jig and done it myself.. (Worth mentioning, i had told guy in phone shop what happened, and about the required "jig")
I collected my phone from the shop today, after a week, and i was told "Your phone is f*****d". To which i replied, "what? are you sure, i mean, i have only flashed it with SGS2 firmware, i'm under the impression it is very hard to break/brick, if i have a jig."
He told me, "Nope, it's beyond repair, it won't work. If you want, i can use the screen and other parts, i'll buy it off you for €40"
No thanks.
So now i am on the lookout for a premade jig. Does anybody know where i can buy one?
I meant to last week, but things happened, and without a phone i was running around a bit...
I'm going to check ebay, but if somebody could recommend somebody reliable, i'd prefer that. Thanks.

I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....

rodman01 said:
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
Click to expand...
Click to collapse
Thanks.
I bought a jig, and it arrived today. Have phone in charger.
Do i just plug the jig in?
Or do i also do the three button press?
The screen is completely black, and nothing appears on it.

only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:

rodman01 said:
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
Click to expand...
Click to collapse
Thanks, going to leave it charging for a little longer, and try it.
If it doesn't work, would a motherboard for the Samsung Galaxy S be easy to replace? I have found one unlocked for €25.
EDIT
Found a tear down video here - http://www.youtube.com/watch?v=vxPWsLd05F4

yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.

rodman01 said:
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
Click to expand...
Click to collapse
Thanks again.
I am after removing it from the charger, and inserted the jig. It's in about 30 seconds now, and nothing is happening..

that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....

rodman01 said:
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
Click to expand...
Click to collapse
What seems to have happened, is i tried to flash it with SGS2 rom. So is it unbrickable?

I am not sure but I think that minimum the bootloader is damaged...there is one more possibility: to repair it via jtag...but for this you have to find someone, who ones one and can repair it....some of the guys don't take much money for such a repair, but with transport costs ets...perhaps it would be cheaper and faster if you take the new mainboard you mentioned.