sorry for being a noob but i just one quick question. I got on a 2.3.3 rom and i wondered if i could flash a froyo modem like jk4 on it?
assuming your gingerbread is running a cmw3 package....
http://www.4shared.com/folder/QumxbFdV/_online.html
courtesy of gingerstyle rom instructions
If you don't know if you have CWM 3, check the color of the text. If it is orange, then you do have CWM 3. You can use the link in the above post or my sig.
If your text is not orange, then you have CWM 2 and can flash the normal Froyo modems.
I have flashed several Froyo and Gingerbread modems using Continuum 5 RC3 and have had the best luck with Gingerbread ROMs. However, that is based on my phone and yours might be different.
Wow...thats a lot of modem you have...do you have kp1 modem? as it works well in my country...
Related
what would be the best kernal and modem combo for this rom i really want good battery life I just got my captivate 6 days ago and out of 3 roms i like this one just want to know the best choices.
Speedmod k12t kernel and KP1 modem.
Take a look at my signature, results speak!!
Nothing against what any particular person will state or tell you to use, not all combination's will necessarily have the same effect from phone to phone. This is really the same as which ROM is the best because what works well on phone "A" might not work the same as phone "B". Just try different combos to find what your phone likes because these phones are very finicky.
i've been reading and this is what i come up with looking at the rom i flashed this is what is says.
model #sgh-i897
firmware 2.2
baseband i9000ugjk3
kernal version 2.6.32.9
build # gingerr5
off this info which kernal would i flash the one for captvate or the one for galaxy s i9000.i just dont want to do something stupid sorry for the questions.
You would flash an sgh-i897 kernel.
Here's a link to hardcore's kernel, http://forum.xda-developers.com/showthread.php?t=893880.
you can use sgs kernel flasher to install it.
The link is at the bottom of the original post in the attached files box
not to ask more ? but is that because my phone is still based on captivate but with just a base rom.and what is really a base rom 2.2 mod to work on captivate?
Yes, the captivate sgh-i897 doesn't have 2.2 froyo yet, because it hasn't been released yet, but developers used the leaked version of froyo to base their roms off of. An i9000 rom is actually a rom from an i9000 galaxy s phone that was adapted for the captivate. But basically, all you have to worry about is whether or not the numbers match up.
I am a Bell i9000m user -- I'm using Froyo right now (JL2 modem) which uses the 850 hz band
I desperately want to go to a Gingerbread ROM.
I understand before flashing roms via CWM I need to change the bootloaders to the new Gingerbread 2.3 models
Can anyone point me to directions as to do this (I think it would have to be done via ODIN I'm assuming?)
Also, do I use JV1 or JVK ? what's the difference ?
Cheers
You could try ezbase, it didn't work very well for me though. (errors on boot)
http://forum.xda-developers.com/showthread.php?t=991792
Otherwise, you could flash the gingerbread bootloaders, then your choice of gingerbread roms, or flash the stock deodexed JVB in ramad's thread, with odin.
FuryriderX said:
You could try ezbase, it didn't work very well for me though. (errors on boot)
http://forum.xda-developers.com/showthread.php?t=991792
Otherwise, you could flash the gingerbread bootloaders, then your choice of gingerbread roms, or flash the stock deodexed JVB in ramad's thread, with odin.
Click to expand...
Click to collapse
So JVB is the one to go with ? I am gonna flash the bootloaders first to turn it into a stock Gingerbread phone then go from there.
What do you mean by stock "deodexed" JVB ? what's the difference between deodexed and/or the original stock ? Sorry I'm still kinda new / learning
Funkadelick said:
So JVB is the one to go with ? I am gonna flash the bootloaders first to turn it into a stock Gingerbread phone then go from there.
What do you mean by stock "deodexed" JVB ? what's the difference between deodexed and/or the original stock ? Sorry I'm still kinda new / learning
Click to expand...
Click to collapse
yes definitely go with JVB bootloaders (e.g here, for files and instructions: http://forum.xda-developers.com/showthread.php?t=1047924) and install a good base rom (e.g.Docs, Simply Honey or Stock Rom) that installs the full JVB in ziplined and deodexed form: this will aloow you to add features and themes later. If you only install the basic odexed JVB you cannot add themes or apps without risking (and incurring, boot crashes).
After you have the Rom installed you can go back to Odin and flash the KC1 modem if the JVB modem doesn't connect with Bell (or adjust the settings as per here on how to activate the necessary band within any modem).
You can than flash any custom kernel if you want to further tweak and adust your system. (Warning, this does get to be fun).
Docs didnt work as well as i'd hoped, i ended up going with Bezke's rom - plus it already had the theme i was planning to install haha.
i peeked at a few of the 2.3.4 ROMs and it seems that they're all heavily themed or modded.
is there one that is close to stock with only a few tasteful mods?
thanks
2.3.4-For Captivate, no. For the i9000, there is JVP& JVQ. You have to use a reoriented kernel with the I9000 roms.
2.3.3-For Captivate, kinda. UCKF1 is a leak, but a very stable one. Cognition 5 is built off the kf1. Since kf1 is a leak, it can't really be called official stock.
thanks. looks like i'm gonna grab a stock JVQ ROM. any recommendations for a kernel that would work best with that?
PS. i was looking at the stock i9000 roms on this thread: http://forum.xda-developers.com/showthread.php?t=948790
I would go with the Talon kernel. It has a lot if features, plus you can choose from 4 different clock speeds (1000, 1200,1300& 1400).
Asfor downloading firmware, I would go to www.samfirmware.com. They have a large selection, but you will have to register (free) to dl anything.
poolemit said:
thanks. looks like i'm gonna grab a stock JVQ ROM. any recommendations for a kernel that would work best with that?
PS. i was looking at the stock i9000 roms on this thread: http://forum.xda-developers.com/showthread.php?t=948790
Click to expand...
Click to collapse
Try out the latest Talon kernel. Works great with the JVQ ROM I have.
so the stock samfirmware ROMs are preferred to the deodexed ones found here on XDA?
ty!
I prefer to dl from samfirm if I can, buy I think you would be ok using either.
gave jvq with talon a shot. got the home key working (except haptic - trying to fix that resulted in boot loop). put aosp theme on it. looked amazing, however i found that set up a bit sluggish than i'm used to, and also the the touchscreen seemed a bit insensitive.
so running 2.3.3 kf1 now. like it so far...
Apex 8.2, JVQ, 2.3.4 ...... It look like Galaxy S2 stock... and I recommend you DarkCore Kernel... Talon is so laggy for me!
Hey Guys,
I have changed my mind again, and decided to go with Darky's newest rom. I had always thought that 2.3.3 JVK came with the gingerbread boot-loaders but never see it mentioned in the areas that discuss going from one firmware to another. With JVK 2.3.3, is it required that I first flash a JVQ firmware first before flashing Darky's new 10.2? Any help would be awesome. Thanks in advance. Specs as follows:
Bell Mobility I9000m Vibrant
Model Number:GT-I9000
Firmware Version:2.3.3
Baseband Version:I9000UGKC1 (Flashed this separately when I first installed GB due to poor signal.)
Kernel Version:2.6.35.7-I9000XXJVK-CL75655 se infra SEI-28 #2
Build Number:GINGERBREAD.XXJVK
CWM 3.0.0.5
Rooted
Have a look on Darkyys forum (link on his ROM Post) and follow TotallyDubbeds video of how to flash it, i was on a "stock" deodexed JVQ and followed the instructions to load it and went without any hassle.
I am new to Galaxy S but have had experience with roms, kernels and radios from a G1.
I started with Samsung 2.2 firmware and rooted it using Cyanogenmod wiki page and flashed the latest MIUI. I know kernels change speed and include Voodoo colours and sound for Galaxy S. I also now radios can change signal and gps accuracy.
1)Are modems the same as radios and if so where do I find a list of them?
2)What is the best bootloader and why does the Gingerbread one not have sd cards work? Also what else doesn't work?
3)How can I check which radio I have and if I flash any bootloaders how do I check that?
Radio, Modem and Baseband are all the same thing. You can check which one you have by going to Settings >About Phone and checking the Baseband Version.
A new modem is easy to flash as a zip file from Recovery and you can find lots of them by searching in the Dev forum, however make sure you flash a modem that is for CM7 since you have Miui installed. For guidence you can search for Modem in the Miui or CM7 thread in the Dev forum.
As for bootloader, there is no way to check which you have, but as you installed Miui directly over 2.2 you should have the froyo bootloaders. CM7 and Miui were designed for froyo bootloaders. Some people say that GB bootloaders have better battery life but if you have GB bootloaders with CM7 you can't access you external SD card and other things may not work properly. I would suggest staying with froyo loaders for now and seeing how it goes.
Sent from my GT-I9000 using XDA Premium App
I have read this:
http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945
but I don't know if it still JPP is the best radio as this was back in December. For people in the UK what would be the best overall radio?
can anyone answer me which is the best CM7 modem for ORANGE ROMANIA? tks
Try jvp or jpy, I'm on orange uk, insanity cm and they both work fine for me don't forget you need cm7 modem, there are 2 threads in dev for this
Sent from my GT-I9000 using XDA Premium App
About bootloaders
I have a SGS GT-I9000, and following
directions from ROM kitchen, I installed a Froyo 2.2.1 version.
It's I9000XXJPY with 2.6.32.9 [email protected] #22 kernel
and it says Rom kitchen v11.1-ZSJPK.
I wanted to install a Gingerbread version from ROM kitchen as well, but it says I have to make sure I have at least JVH bootloaders. Ummm, do I ? And what to do so i could install a gingerbread to my SGS ?
I installed a 2.2.1 froyo also from ROM kitchen I9000XXJVO with 2.6.32.9 [email protected] #22, build number XWJSD, hoping i'll install newer bootloaders with it.
But, i had problems with messaging so i'm gonna have to revert to previous one.
Do i have proper bootloaders or not and what could happen if i tried to install Gingerbread and don't have proper bootloaders.
Thanks in advance